From 8b41812da3c4f478b2e081637cfc8f69554f5a56 Mon Sep 17 00:00:00 2001
From: Øyvind Harboe <oyvind.harboe@zylin.com>
Date: Tue, 21 Dec 2010 20:59:12 +0100
Subject: lpc2148: redo to the new target configuration scheme
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Define a proc which PCBs can easily override.

Also demonstrates how to add multiple TAP exepcted-id's
using arguments.

Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon
I happened to have on my desk?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
---
 tcl/target/lpc2148.cfg | 87 ++++++++++++++++++++++++--------------------------
 1 file changed, 41 insertions(+), 46 deletions(-)

diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index 8062cdde..7665ee75 100644
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -1,50 +1,45 @@
-# Use RCLK. If RCLK is not available fall back to 500kHz.
-#
-# Depending on cabling you might be able to eek this up to 2000kHz.
-jtag_rclk 500
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME lpc2148
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x4f1f0f0f
+# Proc that can be invoked to create a special version of
+# the LPC2148
+proc setup_lpc2148 {chipname tapids} {
+	# Use RCLK. If RCLK is not available fall back to 500kHz.
+	#
+	# Depending on cabling you might be able to eek this up to 2000kHz.
+	jtag_rclk 500
+	
+	adapter_nsrst_delay 200
+	jtag_ntrst_delay 200
+	
+	# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
+	# JTAG, power-on reset is not enough, i.e. you need to perform a
+	# reset before being able to talk to the LPC2148, attach is not possible.
+	reset_config trst_and_srst
+	
+	eval "jtag newtap $chipname cpu -irlen 4 -ircapture 0x1 -irmask 0xf $tapids"
+	
+	target create $chipname.cpu arm7tdmi -chain-position $chipname.cpu
+	
+	$chipname.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+	
+	$chipname.cpu configure -event reset-init {
+		# Force target into ARM state
+		arm core_state arm
+	
+		# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
+		# "User Flash Mode" where interrupt vectors are _not_ remapped,
+		# and reside in flash instead).
+		#
+		# See section 7.1 on page 32 ("Memory Mapping control register") in
+		# "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006.
+		# http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf
+		mwb 0xE01FC040 0x01
+	}
+	
+	# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+	flash bank $chipname.flash lpc2000 0x0 0x7d000 0 0 $chipname.cpu lpc2000_v2 14765 calc_checksum
 }
 
-adapter_nsrst_delay 200
-jtag_ntrst_delay 200
-
-# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate
-# JTAG, power-on reset is not enough, i.e. you need to perform a
-# reset before being able to talk to the LPC2148, attach is not possible.
-
-reset_config trst_and_srst
 
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
-	# Force target into ARM state
-	arm core_state arm
-
-	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
-	# "User Flash Mode" where interrupt vectors are _not_ remapped,
-	# and reside in flash instead).
-	#
-	# See section 7.1 on page 32 ("Memory Mapping control register") in
-	# "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006.
-	# http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf
-	mwb 0xE01FC040 0x01
+# Default settings
+proc init_targets {} {
+	setup_lpc2148 lpc2148 "-expected-id 0x3f0f0f0f -expected-id 0x4f1f0f0f"
 }
-
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum
-- 
cgit v1.2.3