From a63361f982ed60a378490397a24271ae725b0234 Mon Sep 17 00:00:00 2001 From: oharboe Date: Mon, 18 May 2009 07:10:48 +0000 Subject: Dean Glazeski fixed bug in checking of clocked back data in arm7_9_execute_fast_sys_speed. Not reported. There is a chance that this bug hid a deeper problem since it only partially disabled the check(mask & value were equal). git-svn-id: svn://svn.berlios.de/openocd/trunk@1809 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/arm7_9_common.c | 136 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 131 insertions(+), 5 deletions(-) diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c index 72c67490..707dfdc8 100644 --- a/src/target/arm7_9_common.c +++ b/src/target/arm7_9_common.c @@ -50,6 +50,12 @@ int handle_arm7_9_fast_memory_access_command(struct command_context_s *cmd_ctx, int handle_arm7_9_dcc_downloads_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); int handle_arm7_9_etm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); +/** + * Clear watchpoints for an ARM7/9 target. + * + * @param arm7_9 Pointer to the common struct for an ARM7/9 target + * @return JTAG error status after executing queue + */ static int arm7_9_clear_watchpoints(arm7_9_common_t *arm7_9) { embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0); @@ -62,6 +68,13 @@ static int arm7_9_clear_watchpoints(arm7_9_common_t *arm7_9) return jtag_execute_queue(); } +/** + * Assign a watchpoint to one of the two available hardware comparators in an + * ARM7 or ARM9 target. + * + * @param arm7_9 Pointer to the common struct for an ARM7/9 target + * @param breakpoint Pointer to the breakpoint to be used as a watchpoint + */ static void arm7_9_assign_wp(arm7_9_common_t *arm7_9, breakpoint_t *breakpoint) { if (!arm7_9->wp0_used) @@ -82,7 +95,13 @@ static void arm7_9_assign_wp(arm7_9_common_t *arm7_9, breakpoint_t *breakpoint) } } -/* set up embedded ice registers */ +/** + * Setup an ARM7/9 target's embedded ICE registers for software breakpoints. + * + * @param arm7_9 Pointer to common struct for ARM7/9 targets + * @return Error codes if there is a problem finding a watchpoint or the result + * of executing the JTAG queue + */ static int arm7_9_set_software_breakpoints(arm7_9_common_t *arm7_9) { if (arm7_9->sw_breakpoints_added) @@ -137,7 +156,12 @@ static int arm7_9_set_software_breakpoints(arm7_9_common_t *arm7_9) return jtag_execute_queue(); } -/* set things up after a reset / on startup */ +/** + * Setup the common pieces for an ARM7/9 target after reset or on startup. + * + * @param target Pointer to an ARM7/9 target to setup + * @return Result of clearing the watchpoints on the target + */ int arm7_9_setup(target_t *target) { armv4_5_common_t *armv4_5 = target->arch_info; @@ -146,6 +170,18 @@ int arm7_9_setup(target_t *target) return arm7_9_clear_watchpoints(arm7_9); } +/** + * Retrieves the architecture information pointers for ARMv4/5 and ARM7/9 + * targets. A return of ERROR_OK signifies that the target is a valid target + * and that the pointers have been set properly. + * + * @param target Pointer to the target device to get the pointers from + * @param armv4_5_p Pointer to be filled in with the common struct for ARMV4/5 + * targets + * @param arm7_9_p Pointer to be filled in with the common struct for ARM7/9 + * targets + * @return ERROR_OK if successful + */ int arm7_9_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm7_9_common_t **arm7_9_p) { armv4_5_common_t *armv4_5 = target->arch_info; @@ -167,8 +203,16 @@ int arm7_9_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm return ERROR_OK; } -/* we set up the breakpoint even if it is already set. Some action, e.g. reset - * might have erased the values in embedded ice +/** + * Set either a hardware or software breakpoint on an ARM7/9 target. The + * breakpoint is set up even if it is already set. Some actions, e.g. reset, + * might have erased the values in Embedded ICE. + * + * @param target Pointer to the target device to set the breakpoints on + * @param breakpoint Pointer to the breakpoint to be set + * @return For hardware breakpoints, this is the result of executing the JTAG + * queue. For software breakpoints, this will be the status of the + * required memory reads and writes */ int arm7_9_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint) { @@ -280,6 +324,18 @@ int arm7_9_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint) return retval; } +/** + * Unsets an existing breakpoint on an ARM7/9 target. If it is a hardware + * breakpoint, the watchpoint used will be freed and the Embedded ICE registers + * will be updated. Otherwise, the software breakpoint will be restored to its + * original instruction if it hasn't already been modified. + * + * @param target Pointer to ARM7/9 target to unset the breakpoint from + * @param breakpoint Pointer to breakpoint to be unset + * @return For hardware breakpoints, this is the result of executing the JTAG + * queue. For software breakpoints, this will be the status of the + * required memory reads and writes + */ int arm7_9_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint) { int retval = ERROR_OK; @@ -347,6 +403,15 @@ int arm7_9_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint) return retval; } +/** + * Add a breakpoint to an ARM7/9 target. This makes sure that there are no + * dangling breakpoints and that the desired breakpoint can be added. + * + * @param target Pointer to the target ARM7/9 device to add a breakpoint to + * @param breakpoint Pointer to the breakpoint to be added + * @return An error status if there is a problem adding the breakpoint or the + * result of setting the breakpoint + */ int arm7_9_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint) { armv4_5_common_t *armv4_5 = target->arch_info; @@ -388,6 +453,16 @@ int arm7_9_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint) return arm7_9_set_breakpoint(target, breakpoint); } +/** + * Removes a breakpoint from an ARM7/9 target. This will make sure there are no + * dangling breakpoints and updates available watchpoints if it is a hardware + * breakpoint. + * + * @param target Pointer to the target to have a breakpoint removed + * @param breakpoint Pointer to the breakpoint to be removed + * @return Error status if there was a problem unsetting the breakpoint or the + * watchpoints could not be cleared + */ int arm7_9_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint) { int retval = ERROR_OK; @@ -415,6 +490,16 @@ int arm7_9_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint) return ERROR_OK; } +/** + * Sets a watchpoint for an ARM7/9 target in one of the watchpoint units. It is + * considered a bug to call this function when there are no available watchpoint + * units. + * + * @param target Pointer to an ARM7/9 target to set a watchpoint on + * @param watchpoint Pointer to the watchpoint to be set + * @return Error status if watchpoint set fails or the result of executing the + * JTAG queue + */ int arm7_9_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint) { int retval = ERROR_OK; @@ -479,6 +564,14 @@ int arm7_9_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint) return ERROR_OK; } +/** + * Unset an existing watchpoint and clear the used watchpoint unit. + * + * @param target Pointer to the target to have the watchpoint removed + * @param watchpoint Pointer to the watchpoint to be removed + * @return Error status while trying to unset the watchpoint or the result of + * executing the JTAG queue + */ int arm7_9_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint) { int retval = ERROR_OK; @@ -520,6 +613,14 @@ int arm7_9_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint) return ERROR_OK; } +/** + * Add a watchpoint to an ARM7/9 target. If there are no watchpoint units + * available, an error response is returned. + * + * @param target Pointer to the ARM7/9 target to add a watchpoint to + * @param watchpoint Pointer to the watchpoint to be added + * @return Error status while trying to add the watchpoint + */ int arm7_9_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint) { armv4_5_common_t *armv4_5 = target->arch_info; @@ -546,6 +647,14 @@ int arm7_9_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint) return ERROR_OK; } +/** + * Remove a watchpoint from an ARM7/9 target. The watchpoint will be unset and + * the used watchpoint unit will be reopened. + * + * @param target Pointer to the target to remove a watchpoint from + * @param watchpoint Pointer to the watchpoint to be removed + * @return Result of trying to unset the watchpoint + */ int arm7_9_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint) { int retval = ERROR_OK; @@ -565,6 +674,15 @@ int arm7_9_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint) return ERROR_OK; } +/** + * Restarts the target by sending a RESTART instruction and moving the JTAG + * state to IDLE. This includes a timeout waiting for DBGACK and SYSCOMP to be + * asserted by the processor. + * + * @param target Pointer to target to issue commands to + * @return Error status if there is a timeout or a problem while executing the + * JTAG queue + */ int arm7_9_execute_sys_speed(struct target_s *target) { int retval; @@ -610,6 +728,14 @@ int arm7_9_execute_sys_speed(struct target_s *target) return ERROR_OK; } +/** + * Restarts the target by sending a RESTART instruction and moving the JTAG + * state to IDLE. This validates that DBGACK and SYSCOMP are set without + * waiting until they are. + * + * @param target Pointer to the target to issue commands to + * @return Always ERROR_OK + */ int arm7_9_execute_fast_sys_speed(struct target_s *target) { static int set=0; @@ -642,7 +768,7 @@ int arm7_9_execute_fast_sys_speed(struct target_s *target) } /* read debug status register */ - embeddedice_read_reg_w_check(dbg_stat, check_value, check_value); + embeddedice_read_reg_w_check(dbg_stat, check_value, check_mask); return ERROR_OK; } -- cgit v1.2.3