From ae02a0e51708d292b4dff67c12baef1b62b367fa Mon Sep 17 00:00:00 2001 From: Bear Date: Thu, 2 Jun 2011 12:17:28 +0200 Subject: uptech2410 --- tcl/board/uptech_2410.cfg | 65 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 tcl/board/uptech_2410.cfg diff --git a/tcl/board/uptech_2410.cfg b/tcl/board/uptech_2410.cfg new file mode 100644 index 00000000..950f2a7c --- /dev/null +++ b/tcl/board/uptech_2410.cfg @@ -0,0 +1,65 @@ +# Target Configuration for the Uptech 2410 board. +# This configuration hould also work on smdk2410, but I havn't tested it yet. +# Author: xionglingfeng@Gmail.com + +source [find target/samsung_s3c2410.cfg] + +$_TARGETNAME configure -event reset-init { uptech2410_init } +$_TARGETNAME configure -event gdb-attach { reset init } + +proc init_pll_sdram { } { + #echo "---------- Initializing PLL and SDRAM ---------" + #watchdog timer disable + mww phys 0x53000000 0x00000000 + + #disable all interrupts + mww phys 0x4a000008 0xffffffff + + #disable all sub-interrupts + mww phys 0x4a00001c 0x000007ff + + #clear all source pending bits + mww phys 0x4a000000 0xffffffff + + #clear all sub-source pending bits + mww phys 0x4a000018 0x000007ff + + #clear interrupt pending bit + mww phys 0x4a000010 0xffffffff + + #PLL locktime counter + mww phys 0x4c000000 0x00ffffff + + #Fin=12MHz Fout=202.8MHz + #mww phys 0x4c000004 0x000a1031 + + #FCLK:HCLK:PCLK = 1:2:4 + mww phys 0x4c000014 0x00000003 + + + mww phys 0x48000000 0x11111110 + mww phys 0x48000004 0x00007FFC + mww phys 0x48000008 0x00007FFC + mww phys 0x4800000c 0x00000700 + mww phys 0x48000010 0x00000700 + mww phys 0x48000014 0x00002E50 + mww phys 0x48000018 0x00002E50 + mww phys 0x4800001c 0x00018005 + mww phys 0x48000020 0x00018005 + mww phys 0x48000024 0x008c04e9 + mww phys 0x48000028 0x000000b2 + mww phys 0x4800002c 0x00000030 + mww phys 0x48000030 0x00000030 +} + +proc uptech2410_init { } { + init_pll_sdram + #echo "---------- Probing Nand flash ----------" + nand probe 0 + #echo "---------- Enable some functions ----------" +} + +set _NANDNAME $_CHIPNAME.nand +nand device $_NANDNAME s3c2410 $_TARGETNAME + + -- cgit v1.2.3