From a3325f1dc4fd6246706723afd29bb4d69e62bddd Mon Sep 17 00:00:00 2001 From: ntfreak Date: Wed, 20 Aug 2008 10:51:45 +0000 Subject: - added missing parport configs to texi - remove spaces from last patch git-svn-id: svn://svn.berlios.de/openocd/trunk@951 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- doc/openocd.texi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/openocd.texi b/doc/openocd.texi index 80bb33ec..f16e9e46 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -437,13 +437,20 @@ Currently supported cables are @cindex wiggler The original Wiggler layout, also supported by several clones, such as the Olimex ARM-JTAG +@item @b{wiggler2} +@cindex wiggler2 +Same as original wiggler except an led is fitted on D5. +@item @b{wiggler_ntrst_inverted} +@cindex wiggler_ntrst_inverted +Same as original wiggler except TRST is inverted. @item @b{old_amt_wiggler} @cindex old_amt_wiggler The Wiggler configuration that comes with Amontec's Chameleon Programmer. The new version available from the website uses the original Wiggler layout ('@var{wiggler}') @item @b{chameleon} @cindex chameleon -The Amontec Chameleon's CPLD when operated in configuration mode. This is only used to program the Chameleon itself, not a connected target. +The Amontec Chameleon's CPLD when operated in configuration mode. This is only used to +program the Chameleon itself, not a connected target. @item @b{dlc5} @cindex dlc5 The Xilinx Parallel cable III. @@ -454,7 +461,14 @@ This is also the layout used by the HollyGates design (see @uref{http://www.lartmaker.nl/projects/jtag/}). @item @b{flashlink} @cindex flashlink -The ST Parallel cable. +The ST Parallel cable. +@item @b{arm-jtag} +@cindex arm-jtag +Same as original wiggler except SRST and TRST connections reversed and +TRST is also inverted. +@item @b{altium} +@cindex altium +Altium Universal JTAG cable. @end itemize @item @b{parport_write_on_exit} <@var{on|off}> @cindex parport_write_on_exit -- cgit v1.2.3