From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Wed, 27 May 2009 06:44:43 +0000
Subject: Move TCL script files -- Step 1 of 2: - Move
 src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing
 rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am
 handling of *.cfg and *.tcl files in top Makefile.am:   - Add dist-hook to
 include such files under src/tcl in the distribution.   - Add
 install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.   - Add
 uninstall-hook to remove the installed script files. - Change paths to
 (un)install script files in '$(pkgdatadir)/scripts'.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/target/board/hitex_str9-comstick.cfg | 72 --------------------------------
 1 file changed, 72 deletions(-)
 delete mode 100644 src/target/board/hitex_str9-comstick.cfg

(limited to 'src/target/board/hitex_str9-comstick.cfg')

diff --git a/src/target/board/hitex_str9-comstick.cfg b/src/target/board/hitex_str9-comstick.cfg
deleted file mode 100644
index de4d56dd..00000000
--- a/src/target/board/hitex_str9-comstick.cfg
+++ /dev/null
@@ -1,72 +0,0 @@
-# Hitex STR9-comStick
-# http://www.hitex.com/index.php?id=383
-# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
-
-source [find interface/hitex_str9-comstick.cfg]
-
-# set jtag speed
-jtag_khz 3000
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME str912
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists FLASHTAPID ] } {
-   set _FLASHTAPID $FLASHTAPID
-} else {
-   set _FLASHTAPID 0x04570041
-}
-jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x25966041
-}
-jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID ] } {
-   set _BSTAPID $BSTAPID
-} else {
-   # Found on STR9-comStick, revision STR912CS-A1
-   set _BSTAPID1 0x1457f041
-   # Found on STR9-comStick, revision STR912CS-A2
-   set _BSTAPID2 0x2457f041
-}
-jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
-
-$_TARGETNAME configure -event reset-init {
-	# We can increase speed now that we know the target is halted.
-	#jtag_rclk 3000
-	
-	# -- Enable 96K RAM
-	# PFQBC enabled / DTCM & AHB wait-states disabled
-	mww 0x5C002034 0x0191 
-
-	str9x flash_config 0 4 2 0 0x80000
-	flash protect 0 0 7 off
-}
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
-- 
cgit v1.2.3