From 72f5449e4bfc1d6b656812ddc3fc2a4280333577 Mon Sep 17 00:00:00 2001 From: oharboe Date: Sat, 16 May 2009 14:57:02 +0000 Subject: Freddie Chopin move files about to where they belong git-svn-id: svn://svn.berlios.de/openocd/trunk@1798 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/board/hitex_str9-comstick.cfg | 72 ++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 src/target/board/hitex_str9-comstick.cfg (limited to 'src/target/board/hitex_str9-comstick.cfg') diff --git a/src/target/board/hitex_str9-comstick.cfg b/src/target/board/hitex_str9-comstick.cfg new file mode 100644 index 00000000..0974f5ad --- /dev/null +++ b/src/target/board/hitex_str9-comstick.cfg @@ -0,0 +1,72 @@ +# Hitex STR9-comStick +# http://www.hitex.com/index.php?id=383 +# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2. + +source [find interface/hitex_str9-comstick.cfg] + +# set jtag speed +jtag_khz 3000 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str912 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists FLASHTAPID ] } { + set _FLASHTAPID $FLASHTAPID +} else { + set _FLASHTAPID 0x04570041 +} +jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x25966041 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + # Found on STR9-comStick, revision STR912CS-A1 + set _BSTAPID1 0x1457f041 + # Found on STR9-comStick, revision STR912CS-A2 + set _BSTAPID2 0x2457f041 +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + #jtag_rclk 3000 + + # -- Enable 96K RAM + # PFQBC enabled / DTCM & AHB wait-states disabled + mww 0x5C002034 0x0191 + + str9x flash_config 0 4 2 0 0x80000 + flash protect 0 0 7 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 + +#flash bank +flash bank str9x 0x00000000 0x00080000 0 0 0 +flash bank str9x 0x00080000 0x00008000 0 0 0 -- cgit v1.2.3