From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:44:43 +0000 Subject: Move TCL script files -- Step 1 of 2: - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/board/x300t.cfg | 30 ------------------------------ 1 file changed, 30 deletions(-) delete mode 100644 src/target/board/x300t.cfg (limited to 'src/target/board/x300t.cfg') diff --git a/src/target/board/x300t.cfg b/src/target/board/x300t.cfg deleted file mode 100644 index 985f44ed..00000000 --- a/src/target/board/x300t.cfg +++ /dev/null @@ -1,30 +0,0 @@ -# This is for the T-Home X300T / X301T IPTV box, -# which are based on IPTV reference designs from Kiss/Cisco KMM-3*** -# -# It has Sigma Designs SMP8634 chip. -source [find target/smp8634.cfg] - -$_TARGETNAME configure -event reset-init { x300t_init } - -# 1MB CFI capable flash -# flash bank -flash bank cfi 0xac000000 0x100000 2 2 0 - -proc x300t_init { } { - # Setup SDRAM config and flash mapping - # initialize ram - mww 0xa003fffc 3 - mww 0xa003fffc 2 - mww 0xa0030000 0xE34111BA - mww 0xa003fffc 0xa4444 - mww 0xa003fffc 0 - - # remap boot vector in CPU local RAM - mww 0xa006f000 0x60000 - - # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 - mww 0x0006f010 0x48000000 - - # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS) - mww 0x00061ff0 0x48000000 -} -- cgit v1.2.3