From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:44:43 +0000 Subject: Move TCL script files -- Step 1 of 2: - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/test/syntax1.cfg | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 src/target/test/syntax1.cfg (limited to 'src/target/test/syntax1.cfg') diff --git a/src/target/test/syntax1.cfg b/src/target/test/syntax1.cfg deleted file mode 100644 index fb88d5ae..00000000 --- a/src/target/test/syntax1.cfg +++ /dev/null @@ -1,29 +0,0 @@ -jtag_nsrst_delay 200 -jtag_ntrst_delay 200 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst srst_pulls_trst - -#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough -jtag_reset 1 1 -jtag_reset 0 0 - -#jtag scan chain -#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag newtap lpc2148 one -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f - -#target configuration -#daemon_startup reset - -set _TARGETNAME [format "%s.cpu" lpc2148] -target create lpc2148.cpu arm7tdmi -endian little -work-area-size 0x4000 -work-area-phys 0x40000000 -work-area-virt 0 -work-area-backup 0 - -$_TARGETNAME configure -event reset-init { -soft_reset_halt -mvb 0xE01FC040 0x01 -} - - - -flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 - -- cgit v1.2.3