From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:44:43 +0000 Subject: Move TCL script files -- Step 1 of 2: - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/tcl/target/at91rm9200.cfg | 51 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 src/tcl/target/at91rm9200.cfg (limited to 'src/tcl/target/at91rm9200.cfg') diff --git a/src/tcl/target/at91rm9200.cfg b/src/tcl/target/at91rm9200.cfg new file mode 100644 index 00000000..58c7318e --- /dev/null +++ b/src/tcl/target/at91rm9200.cfg @@ -0,0 +1,51 @@ + +reset_config trst_and_srst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91rm9200 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x05b0203f +} + +# Never allow the following! +if { $_CPUTAPID == 0x15b0203f } { + puts "-------------------------------------------------------" + puts "- ERROR: -" + puts "- ERROR: TapID 0x15b0203f is wrong for at91rm9200 -" + puts "- ERROR: The chip/board has a JTAG select pin/jumper -" + puts "- ERROR: -" + puts "- ERROR: In one position (0x05b0203f) it selects the -" + puts "- ERROR: ARM CPU, in the other position (0x1b0203f) -" + puts "- ERROR: it selects boundry-scan not the ARM -" + puts "- ERROR: -" + puts "-------------------------------------------------------" +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +# Create the GDB Target. +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME +# AT91RM9200 has a 16K block of sram @ 0x0020.0000 +$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 + +# This chip has a DCC ... use it +arm7_9 dcc_downloads enable + + + + + -- cgit v1.2.3