From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:44:43 +0000 Subject: Move TCL script files -- Step 1 of 2: - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/tcl/target/is5114.cfg | 49 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 src/tcl/target/is5114.cfg (limited to 'src/tcl/target/is5114.cfg') diff --git a/src/tcl/target/is5114.cfg b/src/tcl/target/is5114.cfg new file mode 100644 index 00000000..c28298c6 --- /dev/null +++ b/src/tcl/target/is5114.cfg @@ -0,0 +1,49 @@ +# script for Insilica IS-5114 +# AKA: Atmel AT76C114 - an ARM946 chip +# ATMEL sold his product line to Insilica... + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME is5114 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +# jtag speed. We need to stick to 16kHz until we've finished reset. +jtag_rclk 16 + +reset_config trst_and_srst + +# Do not specify a tap id here... +#OLD SYNTAX: jtag_device 8 0x1 0x1 0xfe +jtag newtap $_CHIPNAME unknown1 -irlen 8 -ircapture 0x01 -irmask 1 +#OLD SYNTAX: jtag_device 4 0x1 0xf 0xe +# This is the "arm946" chip. +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x0e -irmask 0xf +#OLD SYNTAX: jtag_device 5 0x1 0x1 0x1e +jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1 + + +#arm946e-s and +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -event reset-start { jtag_rclk 16 } +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + jtag_rclk 3000 +} +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 -- cgit v1.2.3