From 140d6c8e7948710a764965075bfaa700efd09802 Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Wed, 27 May 2009 06:44:43 +0000
Subject: Move TCL script files -- Step 1 of 2: - Move
 src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing
 rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am
 handling of *.cfg and *.tcl files in top Makefile.am:   - Add dist-hook to
 include such files under src/tcl in the distribution.   - Add
 install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.   - Add
 uninstall-hook to remove the installed script files. - Change paths to
 (un)install script files in '$(pkgdatadir)/scripts'.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/tcl/target/str730.cfg | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 src/tcl/target/str730.cfg

(limited to 'src/tcl/target/str730.cfg')

diff --git a/src/tcl/target/str730.cfg b/src/tcl/target/str730.cfg
new file mode 100644
index 00000000..5d01ec71
--- /dev/null
+++ b/src/tcl/target/str730.cfg
@@ -0,0 +1,46 @@
+#STR730 CPU
+
+jtag_khz 3000
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME str730
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {	
+   set  _CPUTAPID $CPUTAPID    
+} else {	 
+   set  _CPUTAPID 0x3f0f0f0f
+}
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+#reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
+
+#jtag nTRST and nSRST delay
+jtag_nsrst_delay 500
+jtag_ntrst_delay 500
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-init { jtag_khz 3000 }
+$_TARGETNAME configure -event gdb-flash-erase-start {
+	flash protect 0 0 7 off
+}
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x
+
-- 
cgit v1.2.3