From 52a788e008ecf0ca6156f02de08a0f062d49a236 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 18 Mar 2010 11:56:17 -0700
Subject: remove more duplication
Not sure how the original "move code to adi_v5_swd.c" patch left
some code in the "arm_adi_v5.c" file, but a recent patch was only
a partial fix -- it didn't remove all the duplication.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
src/target/arm_adi_v5.c | 25 -------------------------
1 file changed, 25 deletions(-)
(limited to 'src')
diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c
index 4afd50cb..01c274b3 100644
--- a/src/target/arm_adi_v5.c
+++ b/src/target/arm_adi_v5.c
@@ -1572,28 +1572,3 @@ const struct command_registration dap_command_handlers[] = {
};
-/*
- * This represents the bits which must be sent out on TMS/SWDIO to
- * switch a DAP implemented using an SWJ-DP module into SWD mode.
- * These bits are stored (and transmitted) LSB-first.
- *
- * See the DAP-Lite specification, section 2.2.5 for information
- * about making the debug link select SWD or JTAG. (Similar info
- * is in a few other ARM documents.)
- */
-static const uint8_t jtag2swd_bitseq[] = {
- /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- /* Switching sequence enables SWD and disables JTAG
- * NOTE: bits in the DP's IDCODE may expose the need for
- * an old/deprecated sequence (0xb6 0xed).
- */
- 0x9e, 0xe7,
- /* More than 50 TCK/SWCLK cycles with TMS/SWDIO high,
- * putting both JTAG and SWD logic into reset state.
- */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-};
-
--
cgit v1.2.3