From 6030a5cb2af17fc4bb47788265c9b1400318da6b Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Wed, 10 Mar 2010 21:54:21 +0000 Subject: JLINK: user info message cleanup - remove trailing LF's from user info messages. - split long lines. Signed-off-by: Spencer Oliver --- src/jtag/drivers/jlink.c | 75 +++++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 29 deletions(-) (limited to 'src') diff --git a/src/jtag/drivers/jlink.c b/src/jtag/drivers/jlink.c index f22ad7c6..21dfab22 100644 --- a/src/jtag/drivers/jlink.c +++ b/src/jtag/drivers/jlink.c @@ -62,10 +62,10 @@ static uint8_t usb_out_buffer[JLINK_OUT_BUFFER_SIZE]; static uint8_t usb_emu_result_buffer[JLINK_EMU_RESULT_BUFFER_SIZE]; /* Constants for JLink command */ -#define EMU_CMD_VERSION 0x01 +#define EMU_CMD_VERSION 0x01 #define EMU_CMD_SET_SPEED 0x05 #define EMU_CMD_GET_STATE 0x07 -#define EMU_CMD_HW_CLOCK 0xc8 +#define EMU_CMD_HW_CLOCK 0xc8 #define EMU_CMD_HW_TMS0 0xc9 #define EMU_CMD_HW_TMS1 0xca #define EMU_CMD_HW_JTAG2 0xce @@ -90,7 +90,8 @@ static void jlink_end_state(tap_state_t state); static void jlink_state_move(void); static void jlink_path_move(int num_states, tap_state_t *path); static void jlink_runtest(int num_cycles); -static void jlink_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size, struct scan_command *command); +static void jlink_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, + int scan_size, struct scan_command *command); static void jlink_reset(int trst, int srst); static void jlink_simple_command(uint8_t command); static int jlink_get_status(void); @@ -100,7 +101,8 @@ static void jlink_tap_init(void); static int jlink_tap_execute(void); static void jlink_tap_ensure_space(int scans, int bits); static void jlink_tap_append_step(int tms, int tdi); -static void jlink_tap_append_scan(int length, uint8_t *buffer, struct scan_command *command); +static void jlink_tap_append_scan(int length, uint8_t *buffer, + struct scan_command *command); /* Jlink lowlevel functions */ struct jlink { @@ -276,18 +278,26 @@ static int jlink_init(void) if (jlink_handle == 0) { - LOG_ERROR("Cannot find jlink Interface! Please check connection and permissions."); + LOG_ERROR("Cannot find jlink Interface! Please check " + "connection and permissions."); return ERROR_JTAG_INIT_FAILED; } /* - * The next three instructions were added after discovering a problem while using an oscilloscope. For the V8 - * SAM-ICE dongle (and likely other j-link device variants), the reset line to the target microprocessor was found to - * cycle only intermittently during emulator startup (even after encountering the downstream reset instruction later - * in the code). This was found to create two issues: 1) In general it is a bad practice to not reset a CPU to a known - * state when starting an emulator and 2) something critical happens inside the dongle when it does the first read - * following a new USB session. Keeping the processor in reset during the first read collecting version information - * seems to prevent errant "J-Link command EMU_CMD_VERSION failed" issues. + * The next three instructions were added after discovering a problem + * while using an oscilloscope. + * For the V8 SAM-ICE dongle (and likely other j-link device variants), + * the reset line to the target microprocessor was found to cycle only + * intermittently during emulator startup (even after encountering the + * downstream reset instruction later in the code). + * This was found to create two issues: + * 1) In general it is a bad practice to not reset a CPU to a known + * state when starting an emulator and + * 2) something critical happens inside the dongle when it does the + * first read following a new USB session. + * Keeping the processor in reset during the first read collecting + * version information seems to prevent errant + * "J-Link command EMU_CMD_VERSION failed" issues. */ LOG_INFO("J-Link initialization started / target CPU reset initiated"); @@ -375,7 +385,8 @@ static void jlink_path_move(int num_states, tap_state_t *path) } else { - LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(tap_get_state()), tap_state_name(path[i])); + LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", + tap_state_name(tap_get_state()), tap_state_name(path[i])); exit(-1); } @@ -415,7 +426,8 @@ static void jlink_runtest(int num_cycles) } } -static void jlink_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size, struct scan_command *command) +static void jlink_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, + int scan_size, struct scan_command *command) { tap_state_t saved_end_state; @@ -500,13 +512,13 @@ static int jlink_get_status(void) } int vref = usb_in_buffer[0] + (usb_in_buffer[1] << 8); - LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d\n", \ + LOG_INFO("Vref = %d.%d TCK = %d TDI = %d TDO = %d TMS = %d SRST = %d TRST = %d", \ vref / 1000, vref % 1000, \ usb_in_buffer[2], usb_in_buffer[3], usb_in_buffer[4], \ usb_in_buffer[5], usb_in_buffer[6], usb_in_buffer[7]); if (vref < 1500) - LOG_ERROR("Vref too low. Check Target Power\n"); + LOG_ERROR("Vref too low. Check Target Power"); return ERROR_OK; } @@ -523,7 +535,7 @@ static int jlink_get_version_info(void) result = jlink_usb_read(jlink_handle, 2); if (2 != result) { - LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)\n", result); + LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result); return ERROR_JTAG_DEVICE_ERROR; } @@ -537,7 +549,7 @@ static int jlink_get_version_info(void) result = jlink_usb_read(jlink_handle, len); if (result != len) { - LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)\n", result); + LOG_ERROR("J-Link command EMU_CMD_VERSION failed (%d)", result); return ERROR_JTAG_DEVICE_ERROR; } @@ -550,7 +562,7 @@ static int jlink_get_version_info(void) result = jlink_usb_read(jlink_handle, 4); if (4 != result) { - LOG_ERROR("J-Link command EMU_CMD_GET_CAPS failed (%d)\n", result); + LOG_ERROR("J-Link command EMU_CMD_GET_CAPS failed (%d)", result); return ERROR_JTAG_DEVICE_ERROR; } @@ -565,7 +577,7 @@ static int jlink_get_version_info(void) result = jlink_usb_read(jlink_handle, 4); if (4 != result) { - LOG_ERROR("J-Link command EMU_CMD_GET_HW_VERSION failed (%d)\n", result); + LOG_ERROR("J-Link command EMU_CMD_GET_HW_VERSION failed (%d)", result); return ERROR_JTAG_DEVICE_ERROR; } @@ -585,7 +597,7 @@ static int jlink_get_version_info(void) result = jlink_usb_read(jlink_handle, 4); if (4 != result) { - LOG_ERROR("J-Link command EMU_CMD_GET_MAX_MEM_BLOCK failed (%d)\n", result); + LOG_ERROR("J-Link command EMU_CMD_GET_MAX_MEM_BLOCK failed (%d)", result); return ERROR_JTAG_DEVICE_ERROR; } @@ -731,7 +743,8 @@ static void jlink_tap_append_step(int tms, int tdi) tap_length++; } -static void jlink_tap_append_scan(int length, uint8_t *buffer, struct scan_command *command) +static void jlink_tap_append_scan(int length, uint8_t *buffer, + struct scan_command *command) { struct pending_scan_result *pending_scan_result = &pending_scan_results_buffer[pending_scan_results_length]; @@ -767,7 +780,7 @@ static int jlink_tap_execute(void) * WARNING: This will interfere with tap state counting. */ while ((DIV_ROUND_UP(tap_length, 8) % 64) == 0) { - jlink_tap_append_step((tap_get_state() == TAP_RESET)?1:0, 0); + jlink_tap_append_step((tap_get_state() == TAP_RESET) ? 1 : 0, 0); } // number of full bytes (plus one if some would be left over) @@ -787,7 +800,8 @@ static int jlink_tap_execute(void) result = jlink_usb_message(jlink_handle, 4 + 2 * byte_length, byte_length); if (result != byte_length) { - LOG_ERROR("jlink_tap_execute, wrong result %d (expected %d)", result, byte_length); + LOG_ERROR("jlink_tap_execute, wrong result %d (expected %d)", + result, byte_length); jlink_tap_init(); return ERROR_JTAG_QUEUE_FAILED; } @@ -942,7 +956,8 @@ static int jlink_usb_message(struct jlink *jlink, int out_length, int in_length) result2 = jlink_usb_read_emu_result(jlink); if (1 != result2) { - LOG_ERROR("jlink_usb_read_emu_result retried requested = 1, result=%d, in_length=%i", result2,in_length); + LOG_ERROR("jlink_usb_read_emu_result retried requested = 1, " + "result=%d, in_length=%i", result2, in_length); /* Try again once, should only happen if (in_length%64 == 0) */ result2 = jlink_usb_read_emu_result(jlink); if (1 != result2) @@ -971,7 +986,8 @@ static int jlink_usb_message(struct jlink *jlink, int out_length, int in_length) return result; } -/* calls the given usb_bulk_* function, allowing for the data to trickle in with some timeouts */ +/* calls the given usb_bulk_* function, allowing for the data to + * trickle in with some timeouts */ static int usb_bulk_with_retries( int (*f)(usb_dev_handle *, int, char *, int, int), usb_dev_handle *dev, int ep, @@ -1018,14 +1034,16 @@ static int jlink_usb_write(struct jlink *jlink, int out_length) if (out_length > JLINK_OUT_BUFFER_SIZE) { - LOG_ERROR("jlink_write illegal out_length=%d (max=%d)", out_length, JLINK_OUT_BUFFER_SIZE); + LOG_ERROR("jlink_write illegal out_length=%d (max=%d)", + out_length, JLINK_OUT_BUFFER_SIZE); return -1; } result = usb_bulk_write_ex(jlink->usb_handle, jlink_write_ep, (char *)usb_out_buffer, out_length, JLINK_USB_TIMEOUT); - DEBUG_JTAG_IO("jlink_usb_write, out_length = %d, result = %d", out_length, result); + DEBUG_JTAG_IO("jlink_usb_write, out_length = %d, result = %d", + out_length, result); #ifdef _DEBUG_USB_COMMS_ jlink_debug_buffer(usb_out_buffer, out_length); @@ -1084,4 +1102,3 @@ static void jlink_debug_buffer(uint8_t *buffer, int length) } } #endif - -- cgit v1.2.3