From c8ea748dc22660dad934537384d35903dfcc492e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 21 Feb 2010 14:58:16 -0800 Subject: ADIv5: relocate memacess_tck cycles When using an AP to access a memory (or a memory-mapped register), some extra TCK (assuming JTAG) cycles should be added to ensure the AP has enugh time to complete that access before trying to collect the response. The previous code was adding these cycles *before* trying to access (read or write) data to that address, not *after*. Fix by putting the delays in the right location. Signed-off-by: David Brownell --- src/target/arm_adi_v5.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'src') diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c index 819dd290..d30dd503 100644 --- a/src/target/arm_adi_v5.c +++ b/src/target/arm_adi_v5.c @@ -119,18 +119,6 @@ static int adi_jtag_dp_scan(struct swjdp_common *swjdp, jtag_set_end_state(TAP_IDLE); arm_jtag_set_instr(jtag_info, instr, NULL); - /* Add specified number of tck clocks before accessing memory bus */ - - /* REVISIT these TCK cycles should be *AFTER* updating APACC, since - * they provide more time for the (MEM) AP to complete the read ... - * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec. - */ - if ((instr == JTAG_DP_APACC) - && ((reg_addr == AP_REG_DRW) - || ((reg_addr & 0xF0) == AP_REG_BD0)) - && (swjdp->memaccess_tck != 0)) - jtag_add_runtest(swjdp->memaccess_tck, jtag_set_end_state(TAP_IDLE)); - /* Scan out a read or write operation using some DP or AP register. * For APACC access with any sticky error flag set, this is discarded. */ @@ -152,6 +140,18 @@ static int adi_jtag_dp_scan(struct swjdp_common *swjdp, jtag_add_dr_scan(2, fields, jtag_get_end_state()); + /* Add specified number of tck clocks after starting memory bus + * access, giving the hardware time to complete the access. + * They provide more time for the (MEM) AP to complete the read ... + * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec. + */ + if ((instr == JTAG_DP_APACC) + && ((reg_addr == AP_REG_DRW) + || ((reg_addr & 0xF0) == AP_REG_BD0)) + && (swjdp->memaccess_tck != 0)) + jtag_add_runtest(swjdp->memaccess_tck, + jtag_set_end_state(TAP_IDLE)); + return jtag_get_error(); } -- cgit v1.2.3