From 6336ebb05c2038feea4e249c0db0b60d98498722 Mon Sep 17 00:00:00 2001
From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Fri, 21 Aug 2009 11:23:24 +0000
Subject: Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to
 the right spots. Should have been done in previous commit.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 tcl/board/at91sam7sx.cfg | 55 ------------------------------------------------
 1 file changed, 55 deletions(-)
 delete mode 100644 tcl/board/at91sam7sx.cfg

(limited to 'tcl/board/at91sam7sx.cfg')

diff --git a/tcl/board/at91sam7sx.cfg b/tcl/board/at91sam7sx.cfg
deleted file mode 100644
index 516a09c7..00000000
--- a/tcl/board/at91sam7sx.cfg
+++ /dev/null
@@ -1,55 +0,0 @@
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME at91sam7s
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x3f0f0f0f
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-$_TARGETNAME configure -event reset-init { 
-        soft_reset_halt
-        # RSTC_CR : Reset peripherals
-        mww 0xfffffd00 0xa5000004
-        # disable watchdog
-	mww 0xfffffd44 0x00008000	
-	# enable user reset
-	mww 0xfffffd08 0xa5000001	
-	# CKGR_MOR : enable the main oscillator
-	mww 0xfffffc20 0x00000601	
-	sleep 10
-	# CKGR_PLLR: 96.1097 MHz
-	mww 0xfffffc2c 0x00481c0e 	
-	sleep 10
-	# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-	mww 0xfffffc30 0x00000007	
-	sleep 10
-	# MC_FMR: flash mode (FWS=1,FMCN=73)
-	mww 0xffffff60 0x00490100	
-	sleep 100        
-}
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
-
-#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
-flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
-
-# For more information about the configuration files, take a look at:
-# openocd.texi
-- 
cgit v1.2.3