From 215a5f7442773693045613cff9e3ce3c7f7e9678 Mon Sep 17 00:00:00 2001
From: Spencer Oliver <ntfreak@users.sourceforge.net>
Date: Wed, 12 May 2010 23:04:57 +0100
Subject: scripts: update flash bank names

As the flash bank name is now unique update the scripts to suit.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
---
 tcl/board/hitex_str9-comstick.cfg | 4 ++--
 tcl/board/lubbock.cfg             | 4 ++--
 tcl/board/str910-eval.cfg         | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'tcl/board')

diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index 4d1bb2e4..c85681b1 100644
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -73,7 +73,7 @@ $_TARGETNAME configure -event reset-init {
 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg
index 095c60aa..b58ad5ad 100644
--- a/tcl/board/lubbock.cfg
+++ b/tcl/board/lubbock.cfg
@@ -12,9 +12,9 @@ jtag_ntrst_delay 250
 
 # CS0, CS1 -- two banks of CFI flash, 32 MBytes each
 # each bank is 32-bits wide, two 16-bit chips in parallel
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 4 $_TARGETNAME
 
 # CS2 low -- FPGA registers
diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg
index a2772a84..9e3f8810 100644
--- a/tcl/board/str910-eval.cfg
+++ b/tcl/board/str910-eval.cfg
@@ -58,9 +58,9 @@ $_TARGETNAME configure -event reset-init {
 }
 
 #flash bank str9x <base> <size> 0 0 <target#> <variant>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
 
 # For more information about the configuration files, take a look at:
-- 
cgit v1.2.3