From 94fa8fd30ae5fd29529f401e123864565591e2ed Mon Sep 17 00:00:00 2001
From: Freddie Chopin <freddie_chopin@op.pl>
Date: Thu, 6 Jan 2011 12:48:05 +0100
Subject: Add common LPC2xxx setup procedure, use in all LPC2xxx files.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
---
 tcl/target/lpc2129.cfg | 34 ++++++----------------------------
 1 file changed, 6 insertions(+), 28 deletions(-)

(limited to 'tcl/target/lpc2129.cfg')

diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg
index 2587bf72..10fcd0c1 100644
--- a/tcl/target/lpc2129.cfg
+++ b/tcl/target/lpc2129.cfg
@@ -1,31 +1,9 @@
-# NXP LPC2129
+# NXP LPC2129 ARM7TDMI-S with 256kB flash and 16kB SRAM, clocked with 12MHz crystal
 
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME lpc2129
-}
+source [find target/lpc2xxx.cfg]
 
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0xcf1f0f0f
+proc init_targets {} {
+	# 256kB flash and 16kB SRAM, clocked with 12MHz crystal
+	# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
+	setup_lpc2xxx lpc2129 0xcf1f0f0f 0x40000 lpc2000_v1 0x4000 12000 1500
 }
-
-reset_config trst_and_srst
-
-# reset delays
-adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
-
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
-- 
cgit v1.2.3