From d727e31af99cebff95c41fd1d2b319fddea9edd1 Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 17 Jun 2009 06:44:29 +0000 Subject: David Brownell : Update the Beagle setup: - OMAP3530 updates: * split ICEpick TAP enable support to its own file, for reuse and eventually for storing other utility code like emulation reset * clean up, including labeling the tap as for DAP not for the Cortex-A8 and making endianness non-variable * add a few FIXMEs - BeagleBoard cleanup: there's no SRST, "endstate" is gone, etc I'm not sure I'd say it's further than "barely limping" just yet. Key issues remain lack of Cortex-A8 support, and more complete support for resetting. git-svn-id: svn://svn.berlios.de/openocd/trunk@2267 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/omap3530.cfg | 79 ++++++++++++++++++++++++++++--------------------- 1 file changed, 45 insertions(+), 34 deletions(-) (limited to 'tcl/target/omap3530.cfg') diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg index ad8f8ea8..aba6e255 100644 --- a/tcl/target/omap3530.cfg +++ b/tcl/target/omap3530.cfg @@ -1,57 +1,68 @@ -#File omap3530.cfg - as found on the BEAGLEBOARD -# Assumption is it is generic for all OMAP3530 - -#TI OMAP3 processor - http://www.ti.com +# TI OMAP3530 +# http://focus.ti.com/docs/prod/folders/print/omap3530.html +# Other OMAP3 chips remove DSP and/or the OpenGL support if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { - set _CHIPNAME omap3 + set _CHIPNAME omap3530 } -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - # this defaults to a little endianness - set _ENDIAN little -} +# ICEpick-C ... used to route Cortex, DSP, and more not shown here +source [find target/icepick.cfg] -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID +# Subsidiary TAP: C64x+ DSP ... must enable via ICEpick +jtag newtap $_CHIPNAME dsp -irlen 38 -ircapture 0x25 -irmask 0x3f -disable + +# Subsidiary TAP: CoreSight Debug Access Port (DAP) +if { [info exists DAP_TAPID ] } { + set _DAP_TAPID $DAP_TAPID } else { - # force an error till we get a good number - set _CPUTAPID 0x0B6D602F + set _DAP_TAPID 0x0b6d602f } +jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf \ + -expected-id $_DAP_TAPID -disable +jtag configure $_CHIPNAME.dap -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 3" -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID -disable -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0xf -expected-id 0x0b7ae02f - -target create omap3.cpu cortex_m3 -endian little -chain-position omap3.cpu - -jtag configure $_CHIPNAME.cpu -event tap-enable { - puts "Enabling Cortex-A8 @ OMAP3" - irscan omap3.jrc 7 -endstate IRPAUSE - drscan omap3.jrc 8 0x89 -endstate DRPAUSE - irscan omap3.jrc 2 -endstate IRPAUSE - drscan omap3.jrc 32 0xa3002108 -endstate RUN/IDLE - irscan omap3.jrc 0x3F -endstate RUN/IDLE - runtest 10 - puts "Cortex-A8 @ OMAP3 enabled" +# Primary TAP: ICEpick-C (JTAG route controller) and boundary scan +if { [info exists JRC_TAPID ] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0b7ae02f } +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ + -expected-id $_JRC_TAPID + +# GDB target: Cortex-A8, using DAP +# FIXME when we have A8 support, use it. A8 != M3 ... +target create omap3.cpu cortex_m3 -chain-position $_CHIPNAME.dap + +# FIXME much of this should be in reset event handlers proc omap3_dbginit { } { - version - jtag tapenable omap3.cpu + reset + sleep 500 + + jtag tapenable omap3530.dap targets # sleep 1000 # dap apsel 1 # sleep 1000 # dap apsel 1 # dap info 1 - omap3.cpu mww 0x54011FB0 0xC5ACCE55 4 + + # 0xd401.0000 - ETM + # 0xd401.1000 - Cortex-A8 + # 0xd401.9000 - TPIU (traceport) + # 0xd401.b000 - ETB + # 0xd401.d000 - DAPCTL + + omap3.cpu mww 0x54011FB0 0xC5ACCE55 + omap3.cpu mdw 0x54011314 omap3.cpu mdw 0x54011314 # omap3.cpu mdw 0x54011080 - omap3.cpu mww 0x5401d030 0x00002000 4 + + omap3.cpu mww 0x5401d030 0x00002000 } -- cgit v1.2.3