From a1ce28b118e758015a4e8ba1cb74815aa4193ee0 Mon Sep 17 00:00:00 2001
From: Freddie Chopin <freddie_chopin@op.pl>
Date: Wed, 1 Dec 2010 22:55:56 +0100
Subject: rename some target scripts to be consistent with the rest

Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...)

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
---
 tcl/target/sam7x256.cfg | 50 -------------------------------------------------
 1 file changed, 50 deletions(-)
 delete mode 100644 tcl/target/sam7x256.cfg

(limited to 'tcl/target/sam7x256.cfg')

diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg
deleted file mode 100644
index dd364585..00000000
--- a/tcl/target/sam7x256.cfg
+++ /dev/null
@@ -1,50 +0,0 @@
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME sam7x256
-}
-
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x3f0f0f0f
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-
-$_TARGETNAME configure -event reset-init {
-	# disable watchdog
-	mww 0xfffffd44 0x00008000
-	# enable user reset
-	mww 0xfffffd08 0xa5000001
-	# CKGR_MOR : enable the main oscillator
-	mww 0xfffffc20 0x00000601
-	sleep 10
-	# CKGR_PLLR: 96.1097 MHz
-	mww 0xfffffc2c 0x00481c0e
-	sleep 10
-	# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-	mww 0xfffffc30 0x00000007
-	sleep 10
-	# MC_FMR: flash mode (FWS=1,FMCN=60)
-	mww 0xffffff60 0x003c0100
-	sleep 100
-}
-
-$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
-
-#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432
-- 
cgit v1.2.3