From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:49:24 +0000 Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/str710.cfg | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 tcl/target/str710.cfg (limited to 'tcl/target/str710.cfg') diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg new file mode 100644 index 00000000..2d9d2fc4 --- /dev/null +++ b/tcl/target/str710.cfg @@ -0,0 +1,45 @@ +#start slow, speed up after reset +jtag_khz 10 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str710 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi +$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-init { jtag_khz 6000 } +$_TARGETNAME configure -event gdb-flash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank str7x 0 0 +flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x +flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x + +# For more information about the configuration files, take a look at: +# openocd.texi -- cgit v1.2.3