From 48edd58c3941c562a5a7ea78432a28e72108bbe4 Mon Sep 17 00:00:00 2001
From: Øyvind Harboe <oyvind.harboe@zylin.com>
Date: Tue, 1 Dec 2009 10:03:15 +0100
Subject: target: at91eb40a.cfg is a board, not a target.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Also updated to use target name when creating flash
and set jtag_khz to 16000.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
---
tcl/target/at91eb40a.cfg | 62 ------------------------------------------------
1 file changed, 62 deletions(-)
delete mode 100644 tcl/target/at91eb40a.cfg
(limited to 'tcl/target')
diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg
deleted file mode 100644
index e78cceac..00000000
--- a/tcl/target/at91eb40a.cfg
+++ /dev/null
@@ -1,62 +0,0 @@
-#Script for AT91EB40a
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME at91eb40a
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # force an error till we get a good number
- set _CPUTAPID 0x1f0f0f0f
-}
-
-
-#Atmel ties SRST & TRST together, at which point it makes
-#no sense to use TRST, but use TMS instead.
-#
-#The annoying thing with tying SRST & TRST together is that
-#there is no way to halt the CPU *before and during* the
-#SRST reset, which means that the CPU will run a number
-#of cycles before it can be halted(as much as milliseconds).
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-#target configuration
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
-
-# speed up memory downloads
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-#flash driver
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
-
-# required for usable performance. Used for lots of
-# other things than flash programming.
-$_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
- puts "Running reset init script for AT91EB40A"
- # Reset script for AT91EB40a
- reg cpsr 0x000000D3
- mww 0xFFE00020 0x1
- mww 0xFFE00024 0x00000000
- mww 0xFFE00000 0x01002539
- mww 0xFFFFF124 0xFFFFFFFF
- mww 0xffff0010 0x100
- mww 0xffff0034 0x100
-}
--
cgit v1.2.3