From 974d5f8391f246815fe96f3ca3e4aad1dc6f564e Mon Sep 17 00:00:00 2001 From: oharboe Date: Mon, 22 Jun 2009 19:22:10 +0000 Subject: fix eol native git-svn-id: svn://svn.berlios.de/openocd/trunk@2353 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/ti_dm365.cfg | 194 ++++++++++++++++++++++++------------------------ 1 file changed, 97 insertions(+), 97 deletions(-) (limited to 'tcl/target') diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg index f889432b..d357c6e1 100644 --- a/tcl/target/ti_dm365.cfg +++ b/tcl/target/ti_dm365.cfg @@ -1,97 +1,97 @@ -# -# Texas Instruments DaVinci family: TMS320DM365 -# -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME dm365 -} - -# -# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB -# are enabled without making ICEpick route ARM and ETB into the JTAG chain. -# -# Also note: when running without RTCK before the PLLs are set up, you -# may need to slow the JTAG clock down quite a lot (under 2 MHz). -# -source [find target/icepick.cfg] -set EMU01 "-enable" -#set EMU01 "-disable" - -# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer -if { [info exists ETB_TAPID ] } { - set _ETB_TAPID $ETB_TAPID -} else { - set _ETB_TAPID 0x2b900f0f -} -jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_ETB_TAPID $EMU01 -jtag configure $_CHIPNAME.etb -event tap-enable \ - "icepick_c_tapenable $_CHIPNAME.jrc 1" - -# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM. -if { [info exists CPU_TAPID ] } { - set _CPU_TAPID $CPU_TAPID -} else { - set _CPU_TAPID 0x0792602f -} -jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ - -expected-id $_CPU_TAPID $EMU01 -jtag configure $_CHIPNAME.arm -event tap-enable \ - "icepick_c_tapenable $_CHIPNAME.jrc 0" - -# Primary TAP: ICEpick (JTAG route controller) and boundary scan -if { [info exists JRC_TAPID ] } { - set _JRC_TAPID $JRC_TAPID -} else { - set _JRC_TAPID 0x0b83e02f -} -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ - -expected-id $_JRC_TAPID - -################ - -# various symbol definitions, to avoid hard-wiring addresses -# and enable some sharing of DaVinci-family utility code -global dm365 -set dm365 [ dict create ] - -# Physical addresses for controllers and memory -# (Some of these are valid for many DaVinci family chips) -dict set dm365 sram0 0x00010000 -dict set dm365 sram1 0x00014000 -dict set dm365 sysbase 0x01c40000 -dict set dm365 pllc1 0x01c40800 -dict set dm365 pllc2 0x01c40c00 -dict set dm365 psc 0x01c41000 -dict set dm365 gpio 0x01c67000 -dict set dm365 a_emif 0x01d10000 -dict set dm365 a_emif_cs0 0x02000000 -dict set dm365 a_emif_cs1 0x04000000 -dict set dm365 ddr_emif 0x20000000 -dict set dm365 ddr 0x80000000 - -source [find target/davinci.cfg] - -################ -# GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 16K) -# and the ETB memory (4K) are other options, while trace is unused. -set _TARGETNAME $_CHIPNAME.arm - -target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME - -# NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel, -# and that the work area is used only with a kernel mmu context ... -$_TARGETNAME configure \ - -work-area-virt [expr 0xfffe0000 + 0x4000] \ - -work-area-phys [dict get $dm365 sram1] \ - -work-area-size 0x4000 \ - -work-area-backup 0 - -arm7_9 dbgrq enable -arm7_9 fast_memory_access enable -arm7_9 dcc_downloads enable - -# trace setup -etm config $_TARGETNAME 16 normal full etb -etb config $_TARGETNAME $_CHIPNAME.etb +# +# Texas Instruments DaVinci family: TMS320DM365 +# +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME dm365 +} + +# +# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB +# are enabled without making ICEpick route ARM and ETB into the JTAG chain. +# +# Also note: when running without RTCK before the PLLs are set up, you +# may need to slow the JTAG clock down quite a lot (under 2 MHz). +# +source [find target/icepick.cfg] +set EMU01 "-enable" +#set EMU01 "-disable" + +# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer +if { [info exists ETB_TAPID ] } { + set _ETB_TAPID $ETB_TAPID +} else { + set _ETB_TAPID 0x2b900f0f +} +jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \ + -expected-id $_ETB_TAPID $EMU01 +jtag configure $_CHIPNAME.etb -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 1" + +# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM. +if { [info exists CPU_TAPID ] } { + set _CPU_TAPID $CPU_TAPID +} else { + set _CPU_TAPID 0x0792602f +} +jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \ + -expected-id $_CPU_TAPID $EMU01 +jtag configure $_CHIPNAME.arm -event tap-enable \ + "icepick_c_tapenable $_CHIPNAME.jrc 0" + +# Primary TAP: ICEpick (JTAG route controller) and boundary scan +if { [info exists JRC_TAPID ] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0b83e02f +} +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \ + -expected-id $_JRC_TAPID + +################ + +# various symbol definitions, to avoid hard-wiring addresses +# and enable some sharing of DaVinci-family utility code +global dm365 +set dm365 [ dict create ] + +# Physical addresses for controllers and memory +# (Some of these are valid for many DaVinci family chips) +dict set dm365 sram0 0x00010000 +dict set dm365 sram1 0x00014000 +dict set dm365 sysbase 0x01c40000 +dict set dm365 pllc1 0x01c40800 +dict set dm365 pllc2 0x01c40c00 +dict set dm365 psc 0x01c41000 +dict set dm365 gpio 0x01c67000 +dict set dm365 a_emif 0x01d10000 +dict set dm365 a_emif_cs0 0x02000000 +dict set dm365 a_emif_cs1 0x04000000 +dict set dm365 ddr_emif 0x20000000 +dict set dm365 ddr 0x80000000 + +source [find target/davinci.cfg] + +################ +# GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 16K) +# and the ETB memory (4K) are other options, while trace is unused. +set _TARGETNAME $_CHIPNAME.arm + +target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME + +# NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel, +# and that the work area is used only with a kernel mmu context ... +$_TARGETNAME configure \ + -work-area-virt [expr 0xfffe0000 + 0x4000] \ + -work-area-phys [dict get $dm365 sram1] \ + -work-area-size 0x4000 \ + -work-area-backup 0 + +arm7_9 dbgrq enable +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable + +# trace setup +etm config $_TARGETNAME 16 normal full etb +etb config $_TARGETNAME $_CHIPNAME.etb -- cgit v1.2.3