From dbbc9c41f7db210b0a4e226540a28e0a8a5019bf Mon Sep 17 00:00:00 2001 From: zwelch Date: Wed, 27 May 2009 06:49:24 +0000 Subject: Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/target/aduc702x.cfg | 61 ++++++++++ tcl/target/at91eb40a.cfg | 61 ++++++++++ tcl/target/at91r40008.cfg | 50 ++++++++ tcl/target/at91rm9200.cfg | 51 ++++++++ tcl/target/at91sam9260.cfg | 42 +++++++ tcl/target/at91sam9260_ext_RAM_ext_flash.cfg | 127 ++++++++++++++++++++ tcl/target/davinci.cfg | 170 +++++++++++++++++++++++++++ tcl/target/epc9301.cfg | 31 +++++ tcl/target/feroceon.cfg | 30 +++++ tcl/target/imx21.cfg | 32 +++++ tcl/target/imx27.cfg | 42 +++++++ tcl/target/imx31.cfg | 62 ++++++++++ tcl/target/imx35.cfg | 50 ++++++++ tcl/target/is5114.cfg | 49 ++++++++ tcl/target/ixp42x.cfg | 32 +++++ tcl/target/lm3s3748.cfg | 49 ++++++++ tcl/target/lm3s6965.cfg | 46 ++++++++ tcl/target/lm3s811.cfg | 45 +++++++ tcl/target/lpc2103.cfg | 39 ++++++ tcl/target/lpc2124.cfg | 42 +++++++ tcl/target/lpc2129.cfg | 41 +++++++ tcl/target/lpc2148.cfg | 56 +++++++++ tcl/target/lpc2294.cfg | 38 ++++++ tcl/target/lpc2378.cfg | 49 ++++++++ tcl/target/lpc2478.cfg | 35 ++++++ tcl/target/mega128.cfg | 42 +++++++ tcl/target/netx500.cfg | 34 ++++++ tcl/target/omap3530.cfg | 57 +++++++++ tcl/target/omap5912.cfg | 63 ++++++++++ tcl/target/pic32mx.cfg | 40 +++++++ tcl/target/pxa255.cfg | 104 ++++++++++++++++ tcl/target/pxa270.cfg | 39 ++++++ tcl/target/readme.txt | 41 +++++++ tcl/target/sam7se512.cfg | 39 ++++++ tcl/target/sam7x256.cfg | 52 ++++++++ tcl/target/samsung_s3c2410.cfg | 35 ++++++ tcl/target/samsung_s3c2440.cfg | 35 ++++++ tcl/target/samsung_s3c4510.cfg | 25 ++++ tcl/target/samsung_s3c6410.cfg | 49 ++++++++ tcl/target/sharp_lh79532.cfg | 26 ++++ tcl/target/smdk6410.cfg | 8 ++ tcl/target/smp8634.cfg | 32 +++++ tcl/target/stm32.cfg | 58 +++++++++ tcl/target/str710.cfg | 45 +++++++ tcl/target/str730.cfg | 46 ++++++++ tcl/target/str750.cfg | 51 ++++++++ tcl/target/str912.cfg | 70 +++++++++++ tcl/target/test_reset_syntax_error.cfg | 17 +++ tcl/target/test_syntax_error.cfg | 4 + tcl/target/ti_dm355.cfg | 92 +++++++++++++++ tcl/target/ti_dm6446.cfg | 66 +++++++++++ tcl/target/xba_revA3.cfg | 86 ++++++++++++++ 52 files changed, 2586 insertions(+) create mode 100644 tcl/target/aduc702x.cfg create mode 100644 tcl/target/at91eb40a.cfg create mode 100644 tcl/target/at91r40008.cfg create mode 100644 tcl/target/at91rm9200.cfg create mode 100644 tcl/target/at91sam9260.cfg create mode 100644 tcl/target/at91sam9260_ext_RAM_ext_flash.cfg create mode 100644 tcl/target/davinci.cfg create mode 100644 tcl/target/epc9301.cfg create mode 100644 tcl/target/feroceon.cfg create mode 100644 tcl/target/imx21.cfg create mode 100644 tcl/target/imx27.cfg create mode 100644 tcl/target/imx31.cfg create mode 100644 tcl/target/imx35.cfg create mode 100644 tcl/target/is5114.cfg create mode 100644 tcl/target/ixp42x.cfg create mode 100644 tcl/target/lm3s3748.cfg create mode 100644 tcl/target/lm3s6965.cfg create mode 100644 tcl/target/lm3s811.cfg create mode 100644 tcl/target/lpc2103.cfg create mode 100644 tcl/target/lpc2124.cfg create mode 100644 tcl/target/lpc2129.cfg create mode 100644 tcl/target/lpc2148.cfg create mode 100644 tcl/target/lpc2294.cfg create mode 100644 tcl/target/lpc2378.cfg create mode 100644 tcl/target/lpc2478.cfg create mode 100644 tcl/target/mega128.cfg create mode 100644 tcl/target/netx500.cfg create mode 100644 tcl/target/omap3530.cfg create mode 100644 tcl/target/omap5912.cfg create mode 100644 tcl/target/pic32mx.cfg create mode 100644 tcl/target/pxa255.cfg create mode 100644 tcl/target/pxa270.cfg create mode 100644 tcl/target/readme.txt create mode 100644 tcl/target/sam7se512.cfg create mode 100644 tcl/target/sam7x256.cfg create mode 100644 tcl/target/samsung_s3c2410.cfg create mode 100644 tcl/target/samsung_s3c2440.cfg create mode 100644 tcl/target/samsung_s3c4510.cfg create mode 100644 tcl/target/samsung_s3c6410.cfg create mode 100644 tcl/target/sharp_lh79532.cfg create mode 100644 tcl/target/smdk6410.cfg create mode 100644 tcl/target/smp8634.cfg create mode 100644 tcl/target/stm32.cfg create mode 100644 tcl/target/str710.cfg create mode 100644 tcl/target/str730.cfg create mode 100644 tcl/target/str750.cfg create mode 100644 tcl/target/str912.cfg create mode 100644 tcl/target/test_reset_syntax_error.cfg create mode 100644 tcl/target/test_syntax_error.cfg create mode 100644 tcl/target/ti_dm355.cfg create mode 100644 tcl/target/ti_dm6446.cfg create mode 100644 tcl/target/xba_revA3.cfg (limited to 'tcl/target') diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg new file mode 100644 index 00000000..ef1beb78 --- /dev/null +++ b/tcl/target/aduc702x.cfg @@ -0,0 +1,61 @@ +## -*- tcl -*- +## + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c2410 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # This config file was defaulting to big endian.. + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0xffffffff +} + + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +# This is for the case that TRST/SRST is not wired on your JTAG adaptor. +# Don't really need them anyways. +reset_config none + +## JTAG scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +## +## Target configuration +## +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME + +# allocate the entire SRAM as working area +$_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000 + +## flash configuration +# only target number is needed +flash bank aduc702x 0 0 0 0 0 + +## If you use the watchdog, the following code makes sure that the board +## doesn't reboot when halted via JTAG. Yes, on the older generation +## AdUC702x, timer3 continues running even when the CPU is halted. + +proc watchdog_service {} { + global watchdog_hdl + mww 0xffff036c 0 +# puts "watchdog!!" + set watchdog_hdl [after 500 watchdog_service] +} + +$_TARGETNAME configure -event reset-halt-post { watchdog_service } +$_TARGETNAME configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl } diff --git a/tcl/target/at91eb40a.cfg b/tcl/target/at91eb40a.cfg new file mode 100644 index 00000000..39fbe095 --- /dev/null +++ b/tcl/target/at91eb40a.cfg @@ -0,0 +1,61 @@ +#Script for AT91EB40a + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91eb40a +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x1f0f0f0f +} + + +#Atmel ties SRST & TRST together, at which point it makes +#no sense to use TRST, but use TMS instead. +# +#The annoying thing with tying SRST & TRST together is that +#there is no way to halt the CPU *before and during* the +#SRST reset, which means that the CPU will run a number +#of cycles before it can be halted(as much as milliseconds). +reset_config srst_only srst_pulls_trst + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +#target configuration +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +# speed up memory downloads +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable + +#flash driver +flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf + +# required for usable performance. Used for lots of +# other things than flash programming. +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0 + +$_TARGETNAME configure -event reset-init { + puts "Running reset init script for AT91EB40A" + # Reset script for AT91EB40a + reg cpsr 0x000000D3 + mww 0xFFE00020 0x1 + mww 0xFFE00024 0x00000000 + mww 0xFFE00000 0x01002539 + mww 0xFFFFF124 0xFFFFFFFF + mww 0xffff0010 0x100 + mww 0xffff0034 0x100 +} diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg new file mode 100644 index 00000000..f8f5d410 --- /dev/null +++ b/tcl/target/at91r40008.cfg @@ -0,0 +1,50 @@ + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at9r40008 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + + +$_TARGETNAME configure -event gdb-flash-erase-start { + wait_halt + sleep 10 + poll + # Ethernut 3 remapping is required to access external flash memory. + mww 0xffe00000 0x1000213d + mww 0xffe00004 0x20003e3d + mww 0xffe00020 0x00000001 +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0 + +flash bank cfi 0x10000000 0x400000 2 2 0 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg new file mode 100644 index 00000000..58c7318e --- /dev/null +++ b/tcl/target/at91rm9200.cfg @@ -0,0 +1,51 @@ + +reset_config trst_and_srst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91rm9200 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x05b0203f +} + +# Never allow the following! +if { $_CPUTAPID == 0x15b0203f } { + puts "-------------------------------------------------------" + puts "- ERROR: -" + puts "- ERROR: TapID 0x15b0203f is wrong for at91rm9200 -" + puts "- ERROR: The chip/board has a JTAG select pin/jumper -" + puts "- ERROR: -" + puts "- ERROR: In one position (0x05b0203f) it selects the -" + puts "- ERROR: ARM CPU, in the other position (0x1b0203f) -" + puts "- ERROR: it selects boundry-scan not the ARM -" + puts "- ERROR: -" + puts "-------------------------------------------------------" +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +# Create the GDB Target. +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME +# AT91RM9200 has a 16K block of sram @ 0x0020.0000 +$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1 + +# This chip has a DCC ... use it +arm7_9 dcc_downloads enable + + + + + diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg new file mode 100644 index 00000000..4d51831d --- /dev/null +++ b/tcl/target/at91sam9260.cfg @@ -0,0 +1,42 @@ +###################################### +# Target: Atmel AT91SAM9260 +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91sam9260 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0792603f +} + +reset_config trst_and_srst + +# +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +###################### +# Target configuration +###################### + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +# Internal sram1 memory +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 + + diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg new file mode 100644 index 00000000..f10a021c --- /dev/null +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -0,0 +1,127 @@ + + + +jtag_khz 4 + + +###################################### +# Target: Atmel AT91SAM9260 +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME at91sam9260 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0792603f +} + +reset_config trst_and_srst + + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +###################### +# Target configuration +###################### + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +$_TARGETNAME invoke-event halted + +# Internal sram1 memory +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 + +scan_chain +$_TARGETNAME configure -event reset-deassert-post {at91sam_init} + + +# Flash configuration +#flash bank cfi +flash bank cfi 0x10000000 0x01000000 2 2 $_TARGETNAME + + +proc at91sam_init { } { + + # at reset chip runs at 32khz + jtag_khz 8 + halt + mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset + mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator + sleep 10 # wait 10 ms + mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler + sleep 10 # wait 10 ms + mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected + sleep 10 # wait 10 ms + + # Now run at anything fast... ie: 10mhz! + jtag_khz 10000 # Increase JTAG Speed to 6 MHz + arm7_9 dcc_downloads enable # Enable faster DCC downloads + + mww 0xffffec00 0x0a0a0a0a # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit + mww 0xffffec04 0x0b0b0b0b # SMC_PULSE0 + mww 0xffffec08 0x00160016 # SMC_CYCLE0 + mww 0xffffec0c 0x00161003 # SMC_MODE0 + + flash probe 0 # Identify flash bank 0 + + mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 + + mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM + + mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) + #mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) + + mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0x20000000 0 + mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0x20000000 0 + mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0x20000000 0 + mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0x20000000 0 + mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us +} + + + diff --git a/tcl/target/davinci.cfg b/tcl/target/davinci.cfg new file mode 100644 index 00000000..0a3da27d --- /dev/null +++ b/tcl/target/davinci.cfg @@ -0,0 +1,170 @@ +# +# Utility code for DaVinci-family chips +# + +# davinci_pinmux: assigns PINMUX$reg <== $value +proc davinci_pinmux {soc reg value} { + mww [expr [dict get $soc sysbase] + 4 * $reg] $value +} + +# mrw: "memory read word", returns value of $reg +proc mrw {reg} { + set value "" + ocd_mem2array value 32 $reg 1 + return $value(0) +} + +# mmw: "memory modify word", updates value of $reg +# $reg <== ((value & ~$clearbits) | $setbits) +proc mmw {reg setbits clearbits} { + set old [mrw $reg] + set new [expr ($old & ~$clearbits) | $setbits] + mww $reg $new +} + +# +# pll_setup: initialize PLL +# - pll_addr ... physical addr of controller +# - mult ... pll multiplier +# - config ... dict mapping { prediv, postdiv, div[1-9] } to dividers +# +# For PLLs that don't have a given register (e.g. plldiv8), or where a +# given divider is non-programmable, caller provides *NO* config mapping. +# +# REVISIT there are minor differences between the PLL controllers. +# Handle those; maybe check the ID register. This version behaves +# for at least the dm355. On dm6446 and dm357 the PLLRST polarity +# is different. On dm365 there are more changes. +# +proc pll_setup {pll_addr mult config} { + set pll_ctrl_addr [expr $pll_addr + 0x100] + set pll_ctrl [mrw $pll_ctrl_addr] + + # 1 - clear CLKMODE (bit 8) iff using on-chip oscillator + # NOTE: this assumes we should clear that bit + set pll_ctrl [expr $pll_ctrl & ~0x0100] + mww $pll_ctrl_addr $pll_ctrl + + # 2 - clear PLLENSRC (bit 5) + set pll_ctrl [expr $pll_ctrl & ~0x0020] + mww $pll_ctrl_addr $pll_ctrl + + # 3 - clear PLLEN (bit 0) ... enter bypass mode + set pll_ctrl [expr $pll_ctrl & ~0x0001] + mww $pll_ctrl_addr $pll_ctrl + + # 4 - wait at least 4 refclk cycles + sleep 1 + + # 5 - set PLLRST (bit 3) + set pll_ctrl [expr $pll_ctrl | 0x0008] + mww $pll_ctrl_addr $pll_ctrl + + # 6 - set PLLDIS (bit 4) + set pll_ctrl [expr $pll_ctrl | 0x0010] + mww $pll_ctrl_addr $pll_ctrl + + # 7 - clear PLLPWRDN (bit 1) + set pll_ctrl [expr $pll_ctrl & ~0x0002] + mww $pll_ctrl_addr $pll_ctrl + + # 8 - clear PLLDIS (bit 4) + set pll_ctrl [expr $pll_ctrl & ~0x0010] + mww $pll_ctrl_addr $pll_ctrl + + # 9 - optional: write prediv, postdiv, and pllm + # NOTE: for dm355 PLL1, postdiv is controlled via MISC register + mww [expr $pll_addr + 0x0110] [expr ($mult - 1) & 0xff] + if { [dict exists $config prediv] } { + set div [dict get $config prediv] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x0114] $div + } + if { [dict exists $config postdiv] } { + set div [dict get $config postdiv] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x0128] $div + } + + # 10 - optional: set plldiv1, plldiv2, ... + # NOTE: this assumes some registers have their just-reset values: + # - PLLSTAT.GOSTAT is clear when we enter + # - ALNCTL has everything set + set go 0 + if { [dict exists $config div1] } { + set div [dict get $config div1] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x0118] $div + set go 1 + } + if { [dict exists $config div2] } { + 1et div [dict get $config div2] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x011c] $div + set go 1 + } + if { [dict exists $config div3] } { + set div [dict get $config div3] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x011c] $div + set go 1 + } + if { [dict exists $config div4] } { + set div [dict get $config div4] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x0160] $div + set go 1 + } + if { [dict exists $config div5] } { + set div [dict get $config div5] + set div [expr 0x8000 | ($div - 1)] + mww [expr $pll_addr + 0x0164] $div + set go 1 + } + if {$go != 0} { + # write pllcmd.GO; poll pllstat.GO + mww [expr $pll_addr + 0x0138] 0x01 + set pllstat [expr $pll_addr + 0x013c] + while {[expr [mrw $pllstat] & 0x01] != 0} { sleep 1 } + } + + # 11 - wait at least 5 usec for reset to finish + # (assume covered by overheads including JTAG messaging) + + # 12 - clear PLLRST (bit 3) + set pll_ctrl [expr $pll_ctrl & ~0x0008] + mww $pll_ctrl_addr $pll_ctrl + + # 13 - wait at least 8000 refclk cycles for PLL to lock + # if we assume 24 MHz (slowest osc), that's 1/3 msec + sleep 3 + + # 14 - set PLLEN (bit 0) ... leave bypass mode + set pll_ctrl [expr $pll_ctrl | 0x0001] + mww $pll_ctrl_addr $pll_ctrl +} + +# NOTE: dm6446 requires EMURSTIE set in MDCTL before certain +# modules can be enabled. + +# prepare a non-DSP module to be enabled; finish with psc_go +proc psc_enable {module} { + set psc_addr 0x01c41000 + # write MDCTL + mmw [expr $psc_addr + 0x0a00 + (4 * $module)] 0x03 0x1f +} + +# execute non-DSP PSC transition(s) set up by psc_enable +proc psc_go {} { + set psc_addr 0x01c41000 + set ptstat_addr [expr $psc_addr + 0x0128] + + # just in case PTSTAT.go isn't clear + while { [expr [mrw $ptstat_addr] & 0x01] != 0 } { sleep 1 } + + # write PTCMD.go ... ignoring any DSP power domain + mww [expr $psc_addr + 0x0120] 1 + + # wait for PTSTAT.go to clear (again ignoring DSP power domain) + while { [expr [mrw $ptstat_addr] & 0x01] != 0 } { sleep 1 } +} diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg new file mode 100644 index 00000000..6dbb91b3 --- /dev/null +++ b/tcl/target/epc9301.cfg @@ -0,0 +1,31 @@ +# Cirrus Logic EP9301 processor on an Olimex CS-E9301 board. + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME ep9301 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1 + +#flash configuration +#flash bank [driver_options ...] +flash bank cfi 0x60000000 0x1000000 2 2 0 diff --git a/tcl/target/feroceon.cfg b/tcl/target/feroceon.cfg new file mode 100644 index 00000000..552831a8 --- /dev/null +++ b/tcl/target/feroceon.cfg @@ -0,0 +1,30 @@ +###################################### +# Target: Marvell Feroceon CPU core +###################################### + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME feroceon +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x20a023d3 +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME feroceon -endian $_ENDIAN -chain-position $_TARGETNAME + +reset_config trst_and_srst +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg new file mode 100644 index 00000000..fd2143e1 --- /dev/null +++ b/tcl/target/imx21.cfg @@ -0,0 +1,32 @@ +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imx21 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + + +# Note above there is 1 tap + +# The CPU tap +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x0792611f +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +# Create the GDB Target. +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +arm7_9 dcc_downloads enable diff --git a/tcl/target/imx27.cfg b/tcl/target/imx27.cfg new file mode 100644 index 00000000..240a8498 --- /dev/null +++ b/tcl/target/imx27.cfg @@ -0,0 +1,42 @@ +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imx27 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + + +# Note above there are 2 taps + +# The bs tap +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + set _BSTAPID 0x1b900f0f +} +jtag newtap $_CHIPNAME bs -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_BSTAPID + +# The CPU tap +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x07926121 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# Create the GDB Target. +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs +$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 -work-area-size 0x8000 -work-area-backup 1 +# Internal to the chip, there is 45K of SRAM +# + +arm7_9 dcc_downloads enable diff --git a/tcl/target/imx31.cfg b/tcl/target/imx31.cfg new file mode 100644 index 00000000..3fed2f82 --- /dev/null +++ b/tcl/target/imx31.cfg @@ -0,0 +1,62 @@ +# imx31 config +# + +reset_config trst_and_srst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imx31 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x07b3601d +} + +if { [info exists SDMATAPID ] } { + set _SDMATAPID $SDMATAPID +} else { + set _SDMATAPID 0x2190101d +} + +#======================================== +# The "system jtag controller" +# IMX31 reference manual, page 6-28 - figure 6-14 +if { [info exists SJCTAPID ] } { + set _SJCTAPID $SJCTAPID +} else { + set _SJCTAPID 0x2b900f0f +} +jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id $_SJCTAPID + +# The "SDMA" - mart controller debug tap +# Based on some IO pins - this can be disabled & removed +# See diagram: 6-14 +# SIGNAL NAME: +# SJC_MOD - controls multiplexer - disables ARM1136 +# SDMA_BYPASS - disables SDMA - +# +# Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID + +# No IDCODE for this TAP +jtag newtap $_CHIPNAME whatchacallit -irlen 4 -ircapture 0 -irmask 0xf -expected-id 0x0 + +# Per section 40.17.1, table 40-85 the IR register is 4 bits +# But this conflicts with Diagram 6-13, "3bits ir and drs" +jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_SDMATAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME + + +proc power_restore {} { puts "Sensed power restore. No action." } +proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } diff --git a/tcl/target/imx35.cfg b/tcl/target/imx35.cfg new file mode 100644 index 00000000..d254c603 --- /dev/null +++ b/tcl/target/imx35.cfg @@ -0,0 +1,50 @@ +# imx35 config +# + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imx35 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x07b3601d +} + +if { [info exists SDMATAPID ] } { + set _SDMATAPID $SDMATAPID +} else { + set _SDMATAPID 0x0882601d +} + +#======================================== +# The "system jtag controller" +# IMX31 reference manual, page 6-28 - figure 6-14 +if { [info exists SJCTAPID ] } { + set _SJCTAPID $SJCTAPID +} else { + set _SJCTAPID 0x2b900f0f +} + +jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id $_SJCTAPID + +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID + +# No IDCODE for this TAP +jtag newtap $_CHIPNAME whatchacallit -irlen 4 -ircapture 0 -irmask 0x0 -expected-id 0x0 + +jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_SDMATAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME + +proc power_restore {} { puts "Sensed power restore. No action." } +proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg new file mode 100644 index 00000000..c28298c6 --- /dev/null +++ b/tcl/target/is5114.cfg @@ -0,0 +1,49 @@ +# script for Insilica IS-5114 +# AKA: Atmel AT76C114 - an ARM946 chip +# ATMEL sold his product line to Insilica... + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME is5114 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +# jtag speed. We need to stick to 16kHz until we've finished reset. +jtag_rclk 16 + +reset_config trst_and_srst + +# Do not specify a tap id here... +#OLD SYNTAX: jtag_device 8 0x1 0x1 0xfe +jtag newtap $_CHIPNAME unknown1 -irlen 8 -ircapture 0x01 -irmask 1 +#OLD SYNTAX: jtag_device 4 0x1 0xf 0xe +# This is the "arm946" chip. +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x0e -irmask 0xf +#OLD SYNTAX: jtag_device 5 0x1 0x1 0x1e +jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1 + + +#arm946e-s and +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -event reset-start { jtag_rclk 16 } +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + jtag_rclk 3000 +} +$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 diff --git a/tcl/target/ixp42x.cfg b/tcl/target/ixp42x.cfg new file mode 100644 index 00000000..12ace990 --- /dev/null +++ b/tcl/target/ixp42x.cfg @@ -0,0 +1,32 @@ +#xscale ixp42x CPU + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME ixp42x +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a bigendian + set _ENDIAN big +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can?t set TRST/SRST separately +reset_config srst_only srst_pulls_trst +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x + diff --git a/tcl/target/lm3s3748.cfg b/tcl/target/lm3s3748.cfg new file mode 100644 index 00000000..7321cb8a --- /dev/null +++ b/tcl/target/lm3s3748.cfg @@ -0,0 +1,49 @@ +# Script for luminary lm3s3748 +# +# NB! work in progress! Duplicated from lm3s811.cfg, but does +# it need modification?? + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lm3s3748 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x3ba00477 +} + +# RCLK +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#lm3s3748 Evaluation Board has only srst +reset_config srst_only + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID + + +# the luminary variant causes a software reset rather than asserting SRST +# this stops the debug registers from being cleared +# this will be fixed in later revisions of silicon +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s + +# 8k working area at base of ram +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 + +#flash configuration +flash bank stellaris 0 0 0 0 0 diff --git a/tcl/target/lm3s6965.cfg b/tcl/target/lm3s6965.cfg new file mode 100644 index 00000000..27b104ff --- /dev/null +++ b/tcl/target/lm3s6965.cfg @@ -0,0 +1,46 @@ +# script for luminary lm3s6965 + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lm3s6965 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x3ba00477 +} + +# jtag speed +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#LM3S6965 Evaluation Board has only srst +reset_config srst_only + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID + +# the luminary variant causes a software reset rather than asserting SRST +# this stops the debug registers from being cleared +# this will be fixed in later revisions of silicon +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s + +# 4k working area at base of ram +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash configuration +flash bank stellaris 0 0 0 0 0 diff --git a/tcl/target/lm3s811.cfg b/tcl/target/lm3s811.cfg new file mode 100644 index 00000000..2fa914fa --- /dev/null +++ b/tcl/target/lm3s811.cfg @@ -0,0 +1,45 @@ +# Script for luminary lm3s811 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lm3s811 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x3ba00477 +} + +# jtag speed +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#LM3S811 Evaluation Board has only srst +reset_config srst_only + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID + +# the luminary variant causes a software reset rather than asserting SRST +# this stops the debug registers from being cleared +# this will be fixed in later revisions of silicon +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s + +# 8k working area at base of ram +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 + +#flash configuration +flash bank stellaris 0 0 0 0 0 diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg new file mode 100644 index 00000000..cccc16d7 --- /dev/null +++ b/tcl/target/lpc2103.cfg @@ -0,0 +1,39 @@ +# NXP LPC2103 ARM7TDMI-S with 32kB Flash and 8kB SRAM, clocked with 12MHz crystal + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2103 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4f1f0f0f +} + +# LPC2000 -> SRST causes TRST +reset_config trst_and_srst srst_pulls_trst + +# reset delays +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] + +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +# 8kB of internal SRAM +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x2000 -work-area-backup 0 + +# 32kB of internal Flash, core clocked with 12MHz crystal +# flash bank lpc2000 0 0 [calc_checksum] +flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000 calc_checksum diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg new file mode 100644 index 00000000..4cdbc02c --- /dev/null +++ b/tcl/target/lpc2124.cfg @@ -0,0 +1,42 @@ +#LPC-2124 CPU + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2124 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x4f1f0f0f +} + + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +# reset delays +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +jtag_khz 1000 + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + + +#flash bank +flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg new file mode 100644 index 00000000..b224c044 --- /dev/null +++ b/tcl/target/lpc2129.cfg @@ -0,0 +1,41 @@ +#LPC-2129 CPU + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2129 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +# reset delays +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank +flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg new file mode 100644 index 00000000..d367a8f5 --- /dev/null +++ b/tcl/target/lpc2148.cfg @@ -0,0 +1,56 @@ +# Use RCLK. If RCLK is not available fall back to 500kHz. +# +# Depending on cabling you might be able to eek this up to 2000kHz. +jtag_rclk 500 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2148 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4f1f0f0f +} + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate +# JTAG, power-on reset is not enough, i.e. you need to perform a +# reset before being able to talk to the LPC2148, attach is not possible. + +reset_config trst_and_srst srst_pulls_trst + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] + +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +$_TARGETNAME configure -event reset-init { + # Force target into ARM state. + soft_reset_halt + + # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select + # "User Flash Mode" where interrupt vectors are _not_ remapped, + # and reside in flash instead). + # + # See section 7.1 on page 32 ("Memory Mapping control register") in + # "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006. + # http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf + mwb 0xE01FC040 0x01 +} + +# flash bank lpc2000 0 0 [calc_checksum] +flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg new file mode 100644 index 00000000..c3746c1f --- /dev/null +++ b/tcl/target/lpc2294.cfg @@ -0,0 +1,38 @@ +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2294 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash configuration +#flash bank lpc2000 0 0 +flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg new file mode 100644 index 00000000..16232383 --- /dev/null +++ b/tcl/target/lpc2378.cfg @@ -0,0 +1,49 @@ +# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lpc2378 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4f1f0f0f +} + +#delays on reset lines +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +# LPC2000 -> SRST causes TRST +reset_config trst_and_srst srst_pulls_trst + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM) +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0 + +$_TARGETNAME configure -event reset-init { + # Force target into ARM state + soft_reset_halt + #do not remap 0x0000-0x0020 to anything but the flash + mwb 0xE01FC040 0x01 +} + +# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader. +# After reset the chip uses its internal 4MHz RC oscillator +#flash bank lpc2000 0 0 +flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum + +# 4MHz / 6 = 666kHz, so use 500 +jtag_khz 500 diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg new file mode 100644 index 00000000..84675705 --- /dev/null +++ b/tcl/target/lpc2478.cfg @@ -0,0 +1,35 @@ +# Testing feeedback wanted! +set _CHIPNAME lpc2478 +set _ENDIAN little +set _CPUTAPID 0x4f1f0f0f + +# Use RCLK. If RCLK is not available fall back to 500kHz. +# +# Depending on cabling you might be able to eek this up to 2000kHz. +jtag_rclk 500 + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + + +$_TARGETNAME configure -event reset-init { + # Force target into ARM state + soft_reset_halt + # FIX!!!! should we remap the range below??? Is this applicable to + # Copied from LPC2148. + #do not remap 0x0000-0x0020 to anything but the flash + mwb 0xE01FC040 0x01 +} + + +flash bank lpc2000 0x0 0x7D000 0 0 0 lpc2000_v2 12000 calc_checksum diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg new file mode 100644 index 00000000..964542c9 --- /dev/null +++ b/tcl/target/mega128.cfg @@ -0,0 +1,42 @@ +# for avr + + set _CHIPNAME avr + set _ENDIAN little + +# jtag speed +jtag_khz 4500 + +reset_config srst_only +jtag_nsrst_delay 100 + +#jtag scan chain +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x8970203F +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME + +#$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +flash bank avr 0 0 0 0 0 + +#to use it, script will be like: +#init +#jtag_khz 4500 +#reset init +#verify_ircapture disable +# +#halt +#wait halt +#poll +#avr mass_erase 0 +#flash write_image E:/Versaloon/Software/CAMERAPROTOCOLAGENT.hex +#reset run +#shutdown +# +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/netx500.cfg b/tcl/target/netx500.cfg new file mode 100644 index 00000000..c639017b --- /dev/null +++ b/tcl/target/netx500.cfg @@ -0,0 +1,34 @@ +#Hilscher netX 500 CPU + + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME netx500 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst +#jtag scan chain +# +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + diff --git a/tcl/target/omap3530.cfg b/tcl/target/omap3530.cfg new file mode 100644 index 00000000..ad8f8ea8 --- /dev/null +++ b/tcl/target/omap3530.cfg @@ -0,0 +1,57 @@ +#File omap3530.cfg - as found on the BEAGLEBOARD +# Assumption is it is generic for all OMAP3530 + +#TI OMAP3 processor - http://www.ti.com + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME omap3 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a little endianness + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0B6D602F +} + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID -disable +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0xf -expected-id 0x0b7ae02f + +target create omap3.cpu cortex_m3 -endian little -chain-position omap3.cpu + +jtag configure $_CHIPNAME.cpu -event tap-enable { + puts "Enabling Cortex-A8 @ OMAP3" + irscan omap3.jrc 7 -endstate IRPAUSE + drscan omap3.jrc 8 0x89 -endstate DRPAUSE + irscan omap3.jrc 2 -endstate IRPAUSE + drscan omap3.jrc 32 0xa3002108 -endstate RUN/IDLE + irscan omap3.jrc 0x3F -endstate RUN/IDLE + runtest 10 + puts "Cortex-A8 @ OMAP3 enabled" +} + +proc omap3_dbginit { } { + version + jtag tapenable omap3.cpu + targets + # sleep 1000 + # dap apsel 1 + # sleep 1000 + # dap apsel 1 + # dap info 1 + omap3.cpu mww 0x54011FB0 0xC5ACCE55 4 + omap3.cpu mdw 0x54011314 + omap3.cpu mdw 0x54011314 + # omap3.cpu mdw 0x54011080 + omap3.cpu mww 0x5401d030 0x00002000 4 +} diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg new file mode 100644 index 00000000..2942ad74 --- /dev/null +++ b/tcl/target/omap5912.cfg @@ -0,0 +1,63 @@ +#TI OMAP5912 dual core processor - http://www.ti.com +#on a OMAP5912 OSK board http://www.spectrumdigital.com. + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME omap5912 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a bigendian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +#jtag scan chain +jtag newtap $_CHIPNAME unknown1 -irlen 38 -ircapture 0x0 -irmask 0x0 +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID +jtag newtap $_CHIPNAME unknown2 irlen 8 -ircapture 0x0 -irmask 0x0 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs + +$_TARGETNAME configure -event reset-init { + # + # halt target + # + poll + sleep 1 + halt + wait_halt + # + # disable wdt + # + mww 0xfffec808 0x000000f5 + mww 0xfffec808 0x000000a0 + + mww 0xfffeb048 0x0000aaaa + sleep 500 + mww 0xfffeb048 0x00005555 + sleep 500 + # + # detect flash + # + flash probe 0 +} + +# omap5912 lcd frame buffer as working area +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0 + +#flash bank +flash bank cfi 0x00000000 0x1000000 2 2 0 diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg new file mode 100644 index 00000000..139f801f --- /dev/null +++ b/tcl/target/pic32mx.cfg @@ -0,0 +1,40 @@ + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME pic32mx +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x30938053 +} + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 + +flash bank pic32mx 0xbd000000 0 0 0 0 +flash bank pic32mx 0xbfc00000 0 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/pxa255.cfg b/tcl/target/pxa255.cfg new file mode 100644 index 00000000..c79ea4c9 --- /dev/null +++ b/tcl/target/pxa255.cfg @@ -0,0 +1,104 @@ +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME pxa255 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID + +jtag_nsrst_delay 200 +jtag_ntrst_delay 200 +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa255 +$_TARGETNAME configure -event reset-init { + xscale cp15 15 0x00002001 #Enable CP0 and CP13 access + # + # setup GPIO + # + mww 0x40E00018 0x00008000 #CPSR0 + sleep 20 + mww 0x40E0001C 0x00000002 #GPSR1 + sleep 20 + mww 0x40E00020 0x00000008 #GPSR2 + sleep 20 + mww 0x40E0000C 0x00008000 #GPDR0 + sleep 20 + mww 0x40E00054 0x80000000 #GAFR0_L + sleep 20 + mww 0x40E00058 0x00188010 #GAFR0_H + sleep 20 + mww 0x40E0005C 0x60908018 #GAFR1_L + sleep 20 + mww 0x40E0000C 0x0280E000 #GPDR0 + sleep 20 + mww 0x40E00010 0x821C88B2 #GPDR1 + sleep 20 + mww 0x40E00014 0x000F03DB #GPDR2 + sleep 20 + mww 0x40E00000 0x000F03DB #GPLR0 + sleep 20 + + + mww 0x40F00004 0x00000020 #PSSR + sleep 20 + + # + # setup memory controller + # + mww 0x48000008 0x01111998 #MSC0 + sleep 20 + mww 0x48000010 0x00047ff0 #MSC2 + sleep 20 + mww 0x48000014 0x00000000 #MECR + sleep 20 + mww 0x48000028 0x00010504 #MCMEM0 + sleep 20 + mww 0x4800002C 0x00010504 #MCMEM1 + sleep 20 + mww 0x48000030 0x00010504 #MCATT0 + sleep 20 + mww 0x48000034 0x00010504 #MCATT1 + sleep 20 + mww 0x48000038 0x00004715 #MCIO0 + sleep 20 + mww 0x4800003C 0x00004715 #MCIO1 + sleep 20 + # + mww 0x48000004 0x03CA4018 #MDREF + sleep 20 + mww 0x48000004 0x004B4018 #MDREF + sleep 20 + mww 0x48000004 0x000B4018 #MDREF + sleep 20 + mww 0x48000004 0x000BC018 #MDREF + sleep 20 + mww 0x48000000 0x00001AC8 #MDCNFG + sleep 20 + + sleep 20 + + mww 0x48000000 0x00001AC9 #MDCNFG + sleep 20 + mww 0x48000040 0x00000000 #MDMRS + sleep 20 +} + +reset_config trst_and_srst + + + +#xscale debug_handler 0 0xFFFF0800 # debug handler base address + diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg new file mode 100644 index 00000000..34bb60d4 --- /dev/null +++ b/tcl/target/pxa270.cfg @@ -0,0 +1,39 @@ +#Marvell/Intel PXA270 Script + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME pxa270 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +#IDs for pxa270. Choose one. Are there others?# +#set CPUTAPID 0x79265013 +#set CPUTAPID 0x49265013 +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + + +# set jtag_nsrst_delay to the delay introduced by your reset circuit +# the rest of the needed delays are built into the openocd program +jtag_nsrst_delay 260 +# set the jtag_ntrst_delay to the delay introduced by a reset circuit +# the rest of the needed delays are built into the openocd program +jtag_ntrst_delay 0 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID + +target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x +# maps to PXA internal RAM. If you are using a PXA255 +# you must initialize SDRAM or leave this option off +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x5c000000 -work-area-size 0x10000 -work-area-backup 0 diff --git a/tcl/target/readme.txt b/tcl/target/readme.txt new file mode 100644 index 00000000..ca23c64b --- /dev/null +++ b/tcl/target/readme.txt @@ -0,0 +1,41 @@ +Prerequisites: +The users of OpenOCD as well as computer programs interacting with OpenOCD are expecting that certain commands +do the same thing across all the targets. + +Rules to follow when writing scripts: + +1. The configuration script should be defined such as , for example, the following sequences are working: + reset + flash info +and + reset + flash erase_address +and + reset init + load + +In most cases this can be accomplished by specifying the default startup mode as reset_init (target command +in the configuration file). + +2. If the target is correctly configured, flash must be writable without any other helper commands. It is +assumed that all write-protect mechanisms should be disabled. + +3. The configuration scripts should be defined such as the binary that was written to flash verifies +(turn off remapping, checksums, etc...) + +flash write_image [file] +verify_image [file] + +4. jtag_khz sets the maximum speed (or alternatively RCLK). If invoked +multiple times only the last setting is used. + +interface/xxx.cfg files are always executed *before* target/xxx.cfg +files, so any jtag_khz in interface/xxx.cfg will be overridden by +target/xxx.cfg. jtag_khz in interface/xxx.cfg would then, effectively, +set the default JTAG speed. + +Note that a target/xxx.cfg file can invoke another target/yyy.cfg file, +so one can create target subtype configurations where e.g. only +amount of DRAM, oscillator speeds differ and having a single +config file for the default/common settings. + diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg new file mode 100644 index 00000000..6f0aa38c --- /dev/null +++ b/tcl/target/sam7se512.cfg @@ -0,0 +1,39 @@ + +# ATMEL sam7se512 +# Example: the "Elektor Internet Radio" - EIR +# http://www.ethernut.de/en/hardware/eir/index.html + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7se512 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# The target +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank [ ] +flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 + diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg new file mode 100644 index 00000000..789f7dd6 --- /dev/null +++ b/tcl/target/sam7x256.cfg @@ -0,0 +1,52 @@ +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7x256 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] + +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi +$_TARGETNAME configure -event reset-init { + # disable watchdog + mww 0xfffffd44 0x00008000 + # enable user reset + mww 0xfffffd08 0xa5000001 + # CKGR_MOR : enable the main oscillator + mww 0xfffffc20 0x00000601 + sleep 10 + # CKGR_PLLR: 96.1097 MHz + mww 0xfffffc2c 0x00481c0e + sleep 10 + # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz + mww 0xfffffc30 0x00000007 + sleep 10 + # MC_FMR: flash mode (FWS=1,FMCN=60) + mww 0xffffff60 0x003c0100 + sleep 100 +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank [ ] +flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/samsung_s3c2410.cfg b/tcl/target/samsung_s3c2410.cfg new file mode 100644 index 00000000..3c0768bc --- /dev/null +++ b/tcl/target/samsung_s3c2410.cfg @@ -0,0 +1,35 @@ +# Found on the 'TinCanTools' Hammer board. + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c2410 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # This config file was defaulting to big endian.. + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that cannot set TRST/SRST separately +reset_config trst_and_srst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x30800000 -work-area-size 0x20000 -work-area-backup 0 + +# speed up memory downloads +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable diff --git a/tcl/target/samsung_s3c2440.cfg b/tcl/target/samsung_s3c2440.cfg new file mode 100644 index 00000000..12bb4085 --- /dev/null +++ b/tcl/target/samsung_s3c2440.cfg @@ -0,0 +1,35 @@ +# Target configuration for the Samsung 2440 system on chip +# Tested on a S3C2440 Evaluation board by keesj +# Processor : ARM920Tid(wb) rev 0 (v4l) +# Info: JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c2440 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a bigendian + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x0032409d +} + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm920t +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x200000 -work-area-size 0x4000 -work-area-backup 1 + +#reset configuration +reset_config trst_and_srst + diff --git a/tcl/target/samsung_s3c4510.cfg b/tcl/target/samsung_s3c4510.cfg new file mode 100644 index 00000000..65e7fd84 --- /dev/null +++ b/tcl/target/samsung_s3c4510.cfg @@ -0,0 +1,25 @@ + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c4510 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + + +# This appears to be a "Version 1" arm7tdmi. +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x1f0f0f0f +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME + diff --git a/tcl/target/samsung_s3c6410.cfg b/tcl/target/samsung_s3c6410.cfg new file mode 100644 index 00000000..4991c811 --- /dev/null +++ b/tcl/target/samsung_s3c6410.cfg @@ -0,0 +1,49 @@ +# -*- tcl -*- +# Target configuration for the Samsung s3c6410 system on chip +# Tested on a SMDK6410 +# Processor : ARM1176 +# Info: JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) +# [Duane Ellis 27/nov/2008: Above 0x0032409d appears to be copy/paste from other places] +# [and I do not believe it to be accurate, hence the 0xffffffff below] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME s3c6410 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # this defaults to a bigendian + set _ENDIAN little +} + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + # force an error till we get a good number + set _BSTAPID 0x2b900f0f +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x07b76f0f +} + +#jtag scan chain + +# I think the "unknown" is the boundry scan tap +jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0xe -expected-id $_BSTAPID +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176 + +jtag_nsrst_delay 500 +jtag_ntrst_delay 500 + +#reset configuration +reset_config trst_and_srst diff --git a/tcl/target/sharp_lh79532.cfg b/tcl/target/sharp_lh79532.cfg new file mode 100644 index 00000000..a239e3c5 --- /dev/null +++ b/tcl/target/sharp_lh79532.cfg @@ -0,0 +1,26 @@ +reset_config srst_only srst_pulls_trst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME lh79532 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # sharp changed the number! + set _CPUTAPID 0x00002061 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME + + diff --git a/tcl/target/smdk6410.cfg b/tcl/target/smdk6410.cfg new file mode 100644 index 00000000..6ce07cae --- /dev/null +++ b/tcl/target/smdk6410.cfg @@ -0,0 +1,8 @@ +# Target configuration for the Samsung s3c6410 system on chip +# Tested on a SMDK6410 +# Processor : ARM1176 +# Info: JTAG device found: 0x0032409d (Manufacturer: 0x04e, Part: 0x0324, Version: 0x0) + +source [find target/samsung_s3c6410.cfg] + +flash bank cfi 0x00000000 0x00100000 2 2 0 jedec_probe \ No newline at end of file diff --git a/tcl/target/smp8634.cfg b/tcl/target/smp8634.cfg new file mode 100644 index 00000000..c1d61882 --- /dev/null +++ b/tcl/target/smp8634.cfg @@ -0,0 +1,32 @@ +# script for Sigma Designs SMP8634 (eventually even SMP8635) + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME smp8634 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0x08630001 +} + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +reset_config trst_and_srst separate + +# jtag scan chain +# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg new file mode 100644 index 00000000..2fe17850 --- /dev/null +++ b/tcl/target/stm32.cfg @@ -0,0 +1,58 @@ +# script for stm32 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# jtag speed +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +#jtag scan chain +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # See STM Document RM0008 + # Section 26.6.3 + set _CPUTAPID 0x3ba00477 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + # See STM Document RM0008 + # Section 26.6.2 + # Low density devices, Rev A + set _BSTAPID1 0x06412041 + # Medium density devices, Rev A + set _BSTAPID2 0x06410041 + # Medium density devices, Rev B and Rev Z + set _BSTAPID3 0x16410041 + # High density devices, Rev A + set _BSTAPID4 0x06414041 +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 -expected-id $_BSTAPID3 -expected-id $_BSTAPID4 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +flash bank stm32x 0 0 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg new file mode 100644 index 00000000..2d9d2fc4 --- /dev/null +++ b/tcl/target/str710.cfg @@ -0,0 +1,45 @@ +#start slow, speed up after reset +jtag_khz 10 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str710 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi +$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-init { jtag_khz 6000 } +$_TARGETNAME configure -event gdb-flash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank str7x 0 0 +flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x +flash bank str7x 0x400C0000 0x00004000 0 0 0 STR71x + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg new file mode 100644 index 00000000..5d01ec71 --- /dev/null +++ b/tcl/target/str730.cfg @@ -0,0 +1,46 @@ +#STR730 CPU + +jtag_khz 3000 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str730 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +#reset_config trst_and_srst srst_pulls_trst +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +#jtag nTRST and nSRST delay +jtag_nsrst_delay 500 +jtag_ntrst_delay 500 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi +$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-init { jtag_khz 3000 } +$_TARGETNAME configure -event gdb-flash-erase-start { + flash protect 0 0 7 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank +flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x + diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg new file mode 100644 index 00000000..6b5e66c3 --- /dev/null +++ b/tcl/target/str750.cfg @@ -0,0 +1,51 @@ +#STR750 CPU + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str750 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x4f1f0041 +} + +# jtag speed +jtag_khz 10 + +#use combined on interfaces or targets that can't set TRST/SRST separately +#reset_config trst_and_srst srst_pulls_trst +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID + +#jtag nTRST and nSRST delay +jtag_nsrst_delay 500 +jtag_ntrst_delay 500 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi + +$_TARGETNAME configure -event reset-start { jtag_khz 10 } +$_TARGETNAME configure -event reset-init { jtag_khz 3000 } +$_TARGETNAME configure -event gdb-flash-erase-start { + flash protect 0 0 7 off + flash protect 1 0 1 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank +flash bank str7x 0x20000000 0x00040000 0 0 0 STR75x +flash bank str7x 0x200C0000 0x00004000 0 0 0 STR75x + diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg new file mode 100644 index 00000000..705326b5 --- /dev/null +++ b/tcl/target/str912.cfg @@ -0,0 +1,70 @@ +# script for str9 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str912 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# jtag speed. We need to stick to 16kHz until we've finished reset. +jtag_rclk 16 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +if { [info exists FLASHTAPID ] } { + set _FLASHTAPID $FLASHTAPID +} else { + set _FLASHTAPID 0x04570041 +} +jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x25966041 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + set _BSTAPID 0x1457f041 +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -event reset-start { jtag_rclk 16 } + +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + #jtag_rclk 3000 + + # -- Enable 96K RAM + # PFQBC enabled / DTCM & AHB wait-states disabled + mww 0x5C002034 0x0191 + + str9x flash_config 0 4 2 0 0x80000 + flash protect 0 0 7 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 + +#flash bank str9x 0 0 +flash bank str9x 0x00000000 0x00080000 0 0 0 +flash bank str9x 0x00080000 0x00008000 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/tcl/target/test_reset_syntax_error.cfg b/tcl/target/test_reset_syntax_error.cfg new file mode 100644 index 00000000..e573c1c0 --- /dev/null +++ b/tcl/target/test_reset_syntax_error.cfg @@ -0,0 +1,17 @@ +# Test script to check that syntax error in reset +# script is reported properly. + +# at91eb40a target + +#jtag scan chain +set _CHIPNAME syntaxtest +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf + +#target configuration +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 + +$_TARGETNAME configure -event reset-init { + + syntax error +} diff --git a/tcl/target/test_syntax_error.cfg b/tcl/target/test_syntax_error.cfg new file mode 100644 index 00000000..8727aa36 --- /dev/null +++ b/tcl/target/test_syntax_error.cfg @@ -0,0 +1,4 @@ +# This script tests a syntax error in the startup +# config script + +syntax error here diff --git a/tcl/target/ti_dm355.cfg b/tcl/target/ti_dm355.cfg new file mode 100644 index 00000000..1bd5cda5 --- /dev/null +++ b/tcl/target/ti_dm355.cfg @@ -0,0 +1,92 @@ +# +# Texas Instruments DaVinci family: TMS320DM355 +# +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME dm355 +} +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# +# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB +# are enabled without making ICEpick route ARM and ETB into the JTAG chain. +# +# Also note: when running without RTCK before the PLLs are set up, you +# may need to slow the JTAG clock down quite a lot (under 2 MHz). +# + +# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer +if { [info exists ETB_TAPID ] } { + set _ETB_TAPID $ETB_TAPID +} else { + set _ETB_TAPID 0x2b900f0f +} +jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID + +# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM. +if { [info exists CPU_TAPID ] } { + set _CPU_TAPID $CPU_TAPID +} else { + set _CPU_TAPID 0x07926001 +} +jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU_TAPID + +# Primary TAP: ICEpick (JTAG route controller) and boundary scan +if { [info exists JRC_TAPID ] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0b73b02f +} +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID + +################ + +# various symbol definitions, to avoid hard-wiring addresses +# and enable some sharing of DaVinci-family utility code +global dm355 +set dm355 [ dict create ] + +# Physical addresses for controllers and memory +# (Some of these are valid for many DaVinci family chips) +dict set dm355 sram0 0x00010000 +dict set dm355 sram1 0x00014000 +dict set dm355 sysbase 0x01c40000 +dict set dm355 pllc1 0x01c40800 +dict set dm355 pllc2 0x01c40c00 +dict set dm355 psc 0x01c41000 +dict set dm355 gpio 0x01c67000 +dict set dm355 a_emif 0x01e10000 +dict set dm355 a_emif_cs0 0x02000000 +dict set dm355 a_emif_cs1 0x04000000 +dict set dm355 ddr_emif 0x20000000 +dict set dm355 ddr 0x80000000 + +source [find target/davinci.cfg] + +################ +# GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 16K) +# and the ETB memory (4K) are other options, while trace is unused. +set _TARGETNAME $_CHIPNAME.arm + +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME + +# NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel, +# and that the work area is used only with a kernel mmu context ... +$_TARGETNAME configure \ + -work-area-virt [expr 0xfffe0000 + 0x4000] \ + -work-area-phys [dict get $dm355 sram1] \ + -work-area-size 0x4000 \ + -work-area-backup 0 + +arm7_9 dbgrq enable +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable + +# trace setup +etm config $_TARGETNAME 16 normal full etb +etb config $_TARGETNAME $_CHIPNAME.etb diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg new file mode 100644 index 00000000..68a7c207 --- /dev/null +++ b/tcl/target/ti_dm6446.cfg @@ -0,0 +1,66 @@ +# +# Texas Instruments DaVinci family: TMS320DM6446 +# +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME dm6446 +} +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# +# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB +# are enabled without making ICEpick route ARM and ETB into the JTAG chain. +# +# Also note: when running without RTCK before the PLLs are set up, you +# may need to slow the JTAG clock down quite a lot (under 2 MHz). +# + +# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer +if { [info exists ETB_TAPID ] } { + set _ETB_TAPID $ETB_TAPID +} else { + set _ETB_TAPID 0x2b900f0f +} +jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID + +# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM. +if { [info exists CPU_TAPID ] } { + set _CPU_TAPID $CPU_TAPID +} else { + set _CPU_TAPID 0x07926001 +} +jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU_TAPID + +# Subsidiary TAP: C64x+ DSP ... NOT CURRENTLY INCLUDED, must add via ICEpick. +# Documentation for DSP JTAG interfaces evidently needs NDAs. + +# Primary TAP: ICEpick (JTAG route controller) and boundary scan +if { [info exists JRC_TAPID ] } { + set _JRC_TAPID $JRC_TAPID +} else { + set _JRC_TAPID 0x0b70002f +} +jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID + +# GDB target: the ARM, using SRAM1 for scratch. SRAM0 (also 8K) +# and the ETB memory (4K) are other options, while trace is unused. +set _TARGETNAME $_CHIPNAME.arm + +target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x0000a000 -work-area-size 0x2000 -work-area-backup 0 + +arm7_9 dbgrq enable +arm7_9 fast_memory_access enable +arm7_9 dcc_downloads enable + +# trace setup +# FIXME we ought to be able to say "... config $_TARGETNAME ..." +# (not "config 0") facilitating additional targets (e.g. other chips) +etm config 0 16 normal full etb +etb config 0 $_CHIPNAME.etb + diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg new file mode 100644 index 00000000..007cb9e1 --- /dev/null +++ b/tcl/target/xba_revA3.cfg @@ -0,0 +1,86 @@ +#Written by: Michael Schwingen + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME xba_reva3 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + # default to big endian + set _ENDIAN big +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +reset_config trst_and_srst separate + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x +$_TARGETNAME configure -event reset-init { + ############################################################################# + # setup expansion bus CS, disable external wdt + ############################################################################# + mww 0xc4000000 0xbd113842 #CS0 : Flash, write enabled @0x50000000 + mww 0xc4000004 0x94d10013 #CS1 + mww 0xc4000008 0x95960003 #CS2 + mww 0xc400000c 0x00000000 #CS3 + mww 0xc4000010 0x80900003 #CS4 + mww 0xc4000014 0x9d520003 #CS5 + mww 0xc4000018 0x81860001 #CS6 + mww 0xc400001c 0x80900003 #CS7 + + ############################################################################# + # init SDRAM controller: 16MB, one bank, CL3 + ############################################################################# + mww 0xCC000000 0x2A # SDRAM_CFG: 64MBit, CL3 + mww 0xCC000004 0 # disable refresh + mww 0xCC000008 3 # NOP + sleep 100 + mww 0xCC000004 2100 # set refresh counter + mww 0xCC000008 2 # Precharge All Banks + sleep 100 + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 4 # Auto Refresh + mww 0xCC000008 1 # Mode Select CL3 + + #mww 0xc4000020 0xffffee # CFG0: remove expansion bus boot flash + #mirror at 0x00000000 + + #big endian + reg XSCALE_CTRL 0xF8 + + # + # detect flash + # + flash probe 0 +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20010000 -work-area-size 0x8060 -work-area-backup 0 + + +flash bank cfi 0x50000000 0x400000 2 2 0 + +init +reset init +# set big endian mode +reg XSCALE_CTRL 0xF8 -- cgit v1.2.3