From a1ce28b118e758015a4e8ba1cb74815aa4193ee0 Mon Sep 17 00:00:00 2001 From: Freddie Chopin Date: Wed, 1 Dec 2010 22:55:56 +0100 Subject: rename some target scripts to be consistent with the rest Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...) Signed-off-by: Freddie Chopin --- tcl/target/at91sam7se512.cfg | 40 +++++++++++++++++++++++++++++++++++ tcl/target/at91sam7x256.cfg | 50 ++++++++++++++++++++++++++++++++++++++++++++ tcl/target/atmega128.cfg | 40 +++++++++++++++++++++++++++++++++++ tcl/target/mega128.cfg | 40 ----------------------------------- tcl/target/sam7se512.cfg | 40 ----------------------------------- tcl/target/sam7x256.cfg | 50 -------------------------------------------- 6 files changed, 130 insertions(+), 130 deletions(-) create mode 100644 tcl/target/at91sam7se512.cfg create mode 100644 tcl/target/at91sam7x256.cfg create mode 100644 tcl/target/atmega128.cfg delete mode 100644 tcl/target/mega128.cfg delete mode 100644 tcl/target/sam7se512.cfg delete mode 100644 tcl/target/sam7x256.cfg (limited to 'tcl') diff --git a/tcl/target/at91sam7se512.cfg b/tcl/target/at91sam7se512.cfg new file mode 100644 index 00000000..c48afeff --- /dev/null +++ b/tcl/target/at91sam7se512.cfg @@ -0,0 +1,40 @@ + +# ATMEL sam7se512 +# Example: the "Elektor Internet Radio" - EIR +# http://www.ethernut.de/en/hardware/eir/index.html + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7se512 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +#jtag scan chain +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# The target +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank [ ] +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 + diff --git a/tcl/target/at91sam7x256.cfg b/tcl/target/at91sam7x256.cfg new file mode 100644 index 00000000..dd364585 --- /dev/null +++ b/tcl/target/at91sam7x256.cfg @@ -0,0 +1,50 @@ +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config srst_only srst_pulls_trst + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME sam7x256 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x3f0f0f0f +} + +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi + +$_TARGETNAME configure -event reset-init { + # disable watchdog + mww 0xfffffd44 0x00008000 + # enable user reset + mww 0xfffffd08 0xa5000001 + # CKGR_MOR : enable the main oscillator + mww 0xfffffc20 0x00000601 + sleep 10 + # CKGR_PLLR: 96.1097 MHz + mww 0xfffffc2c 0x00481c0e + sleep 10 + # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz + mww 0xfffffc30 0x00000007 + sleep 10 + # MC_FMR: flash mode (FWS=1,FMCN=60) + mww 0xffffff60 0x003c0100 + sleep 100 +} + +$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 + +#flash bank [ ] +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 diff --git a/tcl/target/atmega128.cfg b/tcl/target/atmega128.cfg new file mode 100644 index 00000000..212a2673 --- /dev/null +++ b/tcl/target/atmega128.cfg @@ -0,0 +1,40 @@ +# for avr + + set _CHIPNAME avr + set _ENDIAN little + +# jtag speed +adapter_khz 4500 + +reset_config srst_only +adapter_nsrst_delay 100 + +#jtag scan chain +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x8970203F +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME + +#$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME + +#to use it, script will be like: +#init +#adapter_khz 4500 +#reset init +#verify_ircapture disable +# +#halt +#wait halt +#poll +#avr mass_erase 0 +#flash write_image E:/Versaloon/Software/CAMERAPROTOCOLAGENT.hex +#reset run +#shutdown diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg deleted file mode 100644 index 212a2673..00000000 --- a/tcl/target/mega128.cfg +++ /dev/null @@ -1,40 +0,0 @@ -# for avr - - set _CHIPNAME avr - set _ENDIAN little - -# jtag speed -adapter_khz 4500 - -reset_config srst_only -adapter_nsrst_delay 100 - -#jtag scan chain -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x8970203F -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME avr -endian $_ENDIAN -chain-position $_TARGETNAME - -#$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 - -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME avr 0 0 0 0 $_TARGETNAME - -#to use it, script will be like: -#init -#adapter_khz 4500 -#reset init -#verify_ircapture disable -# -#halt -#wait halt -#poll -#avr mass_erase 0 -#flash write_image E:/Versaloon/Software/CAMERAPROTOCOLAGENT.hex -#reset run -#shutdown diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg deleted file mode 100644 index c48afeff..00000000 --- a/tcl/target/sam7se512.cfg +++ /dev/null @@ -1,40 +0,0 @@ - -# ATMEL sam7se512 -# Example: the "Elektor Internet Radio" - EIR -# http://www.ethernut.de/en/hardware/eir/index.html - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME sam7se512 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff -} - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config srst_only srst_pulls_trst - -#jtag scan chain -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -# The target -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi - -$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 - -#flash bank [ ] -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 - diff --git a/tcl/target/sam7x256.cfg b/tcl/target/sam7x256.cfg deleted file mode 100644 index dd364585..00000000 --- a/tcl/target/sam7x256.cfg +++ /dev/null @@ -1,50 +0,0 @@ -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config srst_only srst_pulls_trst - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME sam7x256 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x3f0f0f0f -} - -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi - -$_TARGETNAME configure -event reset-init { - # disable watchdog - mww 0xfffffd44 0x00008000 - # enable user reset - mww 0xfffffd08 0xa5000001 - # CKGR_MOR : enable the main oscillator - mww 0xfffffc20 0x00000601 - sleep 10 - # CKGR_PLLR: 96.1097 MHz - mww 0xfffffc2c 0x00481c0e - sleep 10 - # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz - mww 0xfffffc30 0x00000007 - sleep 10 - # MC_FMR: flash mode (FWS=1,FMCN=60) - mww 0xffffff60 0x003c0100 - sleep 100 -} - -$_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0 - -#flash bank [ ] -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432 -- cgit v1.2.3