From f4c1f08f164ab74a7893742218ac0f8dd4a2e473 Mon Sep 17 00:00:00 2001 From: Øyvind Harboe Date: Fri, 30 Jul 2010 22:34:43 +0200 Subject: lpc7168: make flash available upon reset init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit set user mode to avoid ROM being mapped at address 0 rather than flash. Signed-off-by: Øyvind Harboe --- tcl/target/lpc1768.cfg | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'tcl') diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index fc00d78d..88827fa1 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -52,3 +52,22 @@ flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME \ # a reset-init handler) speeds it up. jtag_rclk [ expr 4000 / 6 ] $_TARGETNAME configure -event reset-start { jtag_rclk [ expr 4000 / 6] } + + +$_TARGETNAME configure -event reset-init { + # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select + # "User Flash Mode" where interrupt vectors are _not_ remapped, + # and reside in flash instead). + # + # See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description + # Bit Symbol Value Description Reset + # value + # 0 MAP Memory map control. 0 + # 0 Boot mode. A portion of the Boot ROM is mapped to address 0. + # 1 User mode. The on-chip Flash memory is mapped to address 0. + # 31:1 - Reserved. The value read from a reserved bit is not defined. NA + # + # http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user + + mww 0x400FC040 0x01 +} -- cgit v1.2.3