From 02bbe4147d5fd460d6134d9d1d7b0cc279d68625 Mon Sep 17 00:00:00 2001 From: mifi Date: Sat, 1 Mar 2008 14:01:53 +0000 Subject: - added str912 test example, and test result git-svn-id: svn://svn.berlios.de/openocd/trunk@410 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- testing/examples/STR912Test/src/startup.s | 222 ++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 testing/examples/STR912Test/src/startup.s (limited to 'testing/examples/STR912Test/src/startup.s') diff --git a/testing/examples/STR912Test/src/startup.s b/testing/examples/STR912Test/src/startup.s new file mode 100644 index 00000000..15f03d2b --- /dev/null +++ b/testing/examples/STR912Test/src/startup.s @@ -0,0 +1,222 @@ +/*********************************************************************************** +* Copyright 2005 Anglia Design +* This demo code and associated components are provided as is and has no warranty, +* implied or otherwise. You are free to use/modify any of the provided +* code at your own risk in your applications with the expressed limitation +* of liability (see below) +* +* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY +* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR +* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER +* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. +* +* Author : Spencer Oliver +* Web : www.anglia-designs.com +* +* mifi, 22.01.2008, small changes by the init of the C++ eabi constructors. +* Here I have replaced the eabi init by the normal init. +* Thanks to Spen for the startup code. +***********************************************************************************/ + +/**** Startup Code (executed after Reset) ****/ + +/* Frequency values kHz */ +/* set to suit target hardware */ + + .equ FOSC, 25000 + +/* Standard definitions of Mode bits and Interrupt (I & F) flags in PSRs */ + + .equ Mode_USR, 0x10 + .equ Mode_FIQ, 0x11 + .equ Mode_IRQ, 0x12 + .equ Mode_SVC, 0x13 + .equ Mode_ABT, 0x17 + .equ Mode_UND, 0x1B + .equ Mode_SYS, 0x1F /* available on ARM Arch 4 and later */ + + .equ I_Bit, 0x80 /* when I bit is set, IRQ is disabled */ + .equ F_Bit, 0x40 /* when F bit is set, FIQ is disabled */ + + .equ SRAM32, 0x00 + .equ SRAM64, 0x08 + .equ SRAM96, 0x10 + +/* --- System memory locations */ + + .equ SCRO_AHB_UMB, 0x5C002034 /* System configuration register 0 (unbuffered) */ + + .equ FMI_BASE_UMB, 0x54000000 /* Flash FMI base address (unbuffered) */ + .equ BBSR_off_addr, 0x00 + .equ NBBSR_off_addr, 0x04 + .equ BBADR_off_addr, 0x0C + .equ NBBADR_off_addr, 0x10 + .equ CR_off_addr, 0x18 + +.ifndef LIBUFF + .equ LIBUFF, 0 +.endif + +/* Startup Code must be linked first at Address at which it expects to run. */ + + .text + .arm + .section .init, "ax" + + .global _start + .global _Main_Crystal + +/* After remap this will be our reset handler */ + +_start: + LDR pc, =NextInst +NextInst: + + NOP /* Wait for OSC stabilization */ + NOP + NOP + NOP + NOP + NOP + NOP + NOP + NOP + +/* Enable buffered mode */ + +.if LIBUFF + MRC p15, 0, r0, c1, c0, 0 /* Read CP15 register 1 into r0 */ + ORR r0, r0, #0x8 /* Enable Write Buffer on AHB */ + MCR p15, 0, r0, c1, c0, 0 /* Write CP15 register 1 */ +.endif + +/* Remap Flash Bank 0 at address 0x0 and Bank 1 at address 0x80000, */ +/* when the bank 0 is the boot bank, then enable the Bank 1. */ + + LDR r0, =FMI_BASE_UMB + LDR r1, =0x4 /* configure 512KB Boot bank 0 */ + STR r1, [r0, #BBSR_off_addr] + + LDR r1, =0x2 /* configure 32KB Non Boot bank 1 */ + STR r1, [r0, #NBBSR_off_addr] + + LDR r1, =(0x00000000 >> 2) /* Boot Bank Base Address */ + STR r1, [r0, #BBADR_off_addr] + + LDR r1, =(0x00080000 >> 2) /* Non Boot Bank Base Address */ + STR r1, [r0, #NBBADR_off_addr] + + LDR r1, =0x18 /* Flash Banks 0 1 enabled */ + STR r1, [r0, #CR_off_addr] + +/* Enable 96K RAM */ + + LDR r0, =SCRO_AHB_UMB +# LDR r1, =0x0196 /* prefetch disabled, default enabled */ + LDR r1, =0x0187|SRAM96 + STR r1, [r0] + +/* Set bits 17-18 (Instruction/Data TCM order) of the */ +/* Core Configuration Control Register */ + + MOV r0, #0x60000 + MCR p15, 0x1, r0, c15, c1, 0 + +/* Setup Stack for each mode */ + +/* Enter Abort Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_ABT|I_Bit|F_Bit + LDR sp, =__stack_abt_end__ + +/* Enter Undefined Instruction Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_UND|I_Bit|F_Bit + LDR sp, =__stack_und_end__ + +/* Enter Supervisor Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_SVC|I_Bit|F_Bit + LDR sp, =__stack_svc_end__ + +/* Enter FIQ Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_FIQ|I_Bit|F_Bit + LDR sp, =__stack_fiq_end__ + +/* Enter IRQ Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_IRQ|I_Bit|F_Bit + LDR sp, =__stack_irq_end__ + +/* Enter System/User Mode and set its Stack Pointer */ + + MSR cpsr_c, #Mode_SYS + LDR sp, =__stack_end__ + +/* Setup a default Stack Limit (when compiled with "-mapcs-stack-check") */ + + LDR sl, =__bss_end__ + +/* Relocate .data section (Copy from ROM to RAM) */ + + LDR r1, =_etext + LDR r2, =__data_start + LDR r3, =_edata +LoopRel: + CMP r2, r3 + LDRLO r0, [r1], #4 + STRLO r0, [r2], #4 + BLO LoopRel + +/* Clear .bss section (Zero init) */ + + MOV r0, #0 + LDR r1, =__bss_start__ + LDR r2, =__bss_end__ +LoopZI: + CMP r1, r2 + STRLO r0, [r1], #4 + BLO LoopZI + +/* Call C++ constructors */ + + LDR r0, =__ctors_start__ + LDR r1, =__ctors_end__ +ctor_loop: + CMP r0, r1 + BEQ ctor_end + LDR r2, [r0], #4 + STMFD sp!, {r0-r1} + BLX r2 + LDMFD sp!, {r0-r1} + B ctor_loop +ctor_end: + +/* Need to set up standard file handles */ +/* Only used under simulator, normally overide syscall.c */ + +# BL initialise_monitor_handles + +/* if we use debug version of str9lib this will call the init function */ + + BL libdebug +libdebug: + +/* Enter the C code, use B instruction so as to never return */ +/* use BL main if you want to use c++ destructors below */ + + B main + +/* Return from main, loop forever. */ + +#exit_loop: +# B exit_loop + +/* Fosc values, used by libstr9 */ + +_Main_Crystal: .long FOSC + + .weak libdebug + + .end -- cgit v1.2.3