# page 3-34 of "MCIMC27 Multimedia Applications Processor Reference Manual, Rev 0.3" # SRST pulls TRST # # Without setting these options correctly you'll see all sorts # of weird errors, e.g. MOE=0xe, invalid cpsr values, reset # failing, etc. reset_config trst_and_srst srst_pulls_trst if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { set _CHIPNAME imx27 } if { [info exists ENDIAN] } { set _ENDIAN $ENDIAN } else { set _ENDIAN little } # Note above there are 2 taps # trace buffer if { [info exists ETBTAPID ] } { set _ETBTAPID $ETBTAPID } else { set _ETBTAPID 0x1b900f0f } jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETBTAPID # The CPU tap if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { set _CPUTAPID 0x07926121 } jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID # Create the GDB Target. set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs # REVISIT what operating environment sets up this virtual address mapping? $_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \ -work-area-size 0x8000 -work-area-backup 1 # Internal to the chip, there is 45K of SRAM # arm7_9 dcc_downloads enable # trace setup etm config $_TARGETNAME 16 normal full etb etb config $_TARGETNAME $_CHIPNAME.etb ='h' onchange='this.form.submit();'>
aboutsummaryrefslogtreecommitdiff |