diff options
Diffstat (limited to 'firmware/LUFA/Drivers/USB/HighLevel/PipeStream.h')
-rw-r--r-- | firmware/LUFA/Drivers/USB/HighLevel/PipeStream.h | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/firmware/LUFA/Drivers/USB/HighLevel/PipeStream.h b/firmware/LUFA/Drivers/USB/HighLevel/PipeStream.h new file mode 100644 index 0000000..658253d --- /dev/null +++ b/firmware/LUFA/Drivers/USB/HighLevel/PipeStream.h @@ -0,0 +1,298 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host pipe stream function definitions. + * + * This file contains structures, function prototypes and macros related to the sending and receiving of + * arbitrary data streams through the device's data pipes when the library is initialized in USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeRW + * @defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams + * + * Functions, macros, variables, enums and types related to data reading and writing of data streams from + * and to pipes. + * + * @{ + */ + +#ifndef __PIPE_STREAM_H__ +#define __PIPE_STREAM_H__ + + /* Includes: */ + #include <avr/pgmspace.h> + #include <avr/eeprom.h> + #include <stdbool.h> + + #include "../../../Common/Common.h" + #include "USBTask.h" + + #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__) + #include "StreamCallbacks.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__) + #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback + #else + #define __CALLBACK_PARAM + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */ + enum Pipe_Stream_RW_ErrorCodes_t + { + PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */ + PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */ + PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during + * the transfer. + */ + PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + PIPE_RWSTREAM_CallbackAborted = 4, /**< Indicates that the stream's callback function aborted + * the transfer early. + */ + }; + + /* Function Prototypes: */ + /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host + * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the + * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro. + * Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready, + * allowing for early aborts of stream transfers. + * + * The callback routine should be created according to the information in \ref Group_StreamCallbacks. + * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are + * disabled and this function has the Callback parameter omitted. + * + * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Length Number of bytes to send via the currently selected pipe. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Discard_Stream(uint16_t Length + __CALLBACK_PARAM); + + /** Writes the given number of bytes to the pipe from the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * The callback routine should be created according to the information in \ref Group_StreamCallbacks. + * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are + * disabled and this function has the Callback parameter omitted. + * + * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_LE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_EStream_LE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Pipe_Write_Stream_LE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_PStream_LE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** Writes the given number of bytes to the pipe from the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * The callback routine should be created according to the information in \ref Group_StreamCallbacks. + * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are + * disabled and this function has the Callback parameter omitted. + * + * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_Stream_BE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE(). + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_EStream_BE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** FLASH buffer source version of \ref Pipe_Write_Stream_BE(). + * + * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. + * + * \param[in] Buffer Pointer to the source data buffer to read from. + * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Write_PStream_BE(const void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in little endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * The callback routine should be created according to the information in \ref Group_StreamCallbacks. + * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are + * disabled and this function has the Callback parameter omitted. + * + * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_LE(void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_EStream_LE(void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads the given number of bytes from the pipe into the given buffer in big endian, + * sending full packets to the device as needed. The last packet filled is not automatically sent; + * the user is responsible for manually sending the last written packet to the host via the + * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is + * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers. + * + * The callback routine should be created according to the information in \ref Group_StreamCallbacks. + * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are + * disabled and this function has the Callback parameter omitted. + * + * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without + * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_Stream_BE(void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE(). + * + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t Pipe_Read_EStream_BE(void* Buffer, + uint16_t Length + __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + |