diff options
Diffstat (limited to 'LUFA/Drivers/USB/HighLevel/EndpointStream.h')
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/EndpointStream.h | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/LUFA/Drivers/USB/HighLevel/EndpointStream.h b/LUFA/Drivers/USB/HighLevel/EndpointStream.h new file mode 100644 index 0000000..a8b9021 --- /dev/null +++ b/LUFA/Drivers/USB/HighLevel/EndpointStream.h @@ -0,0 +1,524 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2010.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB device endpoint stream function definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the sending and receiving of
+ * arbitrary data streams through the device's data endpoints when the library is initialized in USB device mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_EndpointRW
+ * @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to endpoints.
+ *
+ * @{
+ */
+
+#ifndef __ENDPOINT_STREAM_H__
+#define __ENDPOINT_STREAM_H__
+
+ /* Includes: */
+ #include <avr/pgmspace.h>
+ #include <avr/eeprom.h>
+ #include <stdbool.h>
+
+ #include "../../../Common/Common.h"
+ #include "USBTask.h"
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #include "StreamCallbacks.h"
+ #endif
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback
+ #else
+ #define __CALLBACK_PARAM
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the Endpoint_*_Stream_* functions. */
+ enum Endpoint_Stream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
+ * transfer by the host or device.
+ */
+ ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ ENDPOINT_RWSTREAM_CallbackAborted = 5, /**< Indicates that the stream's callback function
+ * aborted the transfer early.
+ */
+ };
+
+ /** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions. */
+ enum Endpoint_ControlStream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
+ ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ };
+
+ /* Function Prototypes: */
+ /** Reads and discards the given number of bytes from the endpoint from the given buffer,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the next
+ * packet is ready, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Discard_Stream(uint16_t Length
+ __CALLBACK_PARAM);
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
+ * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
+ * aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_LE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
+ * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
+ * aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_BE(const void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the endpoint
+ * is ready to accept the next packet, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_LE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
+ * each USB packet, the given stream callback function is executed repeatedly until the endpoint
+ * is ready to accept the next packet, allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_BE(void* Buffer,
+ uint16_t Length
+ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_LE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_BE(const void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
+ |