conf/machine: Drop older machines with no recent updates

These are all moving to meta-extras. Ideally in the future machines
such as these will be maintained to topic specific layers as we move
to a more layer oriented model. If this causes a problem for anyone
please discuss it on the mailing list.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 0 insertions, 67 deletions

diff --git a/meta/conf/machine/cm-x270.conf b/meta/conf/machine/cm-x270.conf
deleted file mode 100644
index 9bf7d8f6a..000000000
--- a/meta/conf/machine/cm-x270.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-#@TYPE: Machine
-#@Name: Compulab cm-x270
-#@DESCRIPTION: Machine configuration for Compulab cm-x270 computer module
-#OLDEST_KERNEL = "2.6.16"
-TARGET_ARCH = "arm"
-GUI_MACHINE_CLASS ?= "bigscreen"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux ?= "2.6.23"
-
-
-require conf/machine/include/tune-xscale.inc
-PACKAGE_EXTRA_ARCHS += "iwmmxt"
-
-# Console serial port. 
-# If you have a W module, add the following line to your local.conf:
-# the following line to your local.conf:
-CMX270_CONSOLE_SERIAL_PORT ?= "ttyS0"
-# the following is for the cm-x270 L module
-#CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1"
-
-# NAND flash eraseblock size
-# most of the older cm-x270 modules are populated with NAND flash
-# that have 128KiB eraseblocks.  Recently, a user encounted
-# a device that has 16KiB eraseblocks.  The following define
-# can be overridden in local.conf if you have one of these devices.
-CMX270_NAND_ERASEBLOCK_SIZE ?= "0x20000"
-
-
-# used by sysvinit_2 package, so rebuild this
-# package if you change the SERIAL_CONSOLE setting
-# the following is the port for the cm-x270 L module
-# I think the W module would use ttyS0, but has
-# not been tested.  This can be overwritten in 
-# local.conf
-SERIAL_CONSOLE ?= "38400 ${CMX270_CONSOLE_SERIAL_PORT}"
-
-# used by opie-collections.inc
-ROOT_FLASH_SIZE ?= "32"
-
-# for NAND flash.
-EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=${CMX270_NAND_ERASEBLOCK_SIZE} --pad --no-cleanmarkers;\
-	sumtool -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \
-	-o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs-summary.jffs2 \
-	-e ${CMX270_NAND_ERASEBLOCK_SIZE} -p; \
-	cd ${DEPLOY_DIR_IMAGE}; \
-	rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.rootfs-summary.jffs2; \
-	ln -s ${IMAGE_NAME}.rootfs-summary.jffs2 ${IMAGE_LINK_NAME}.rootfs-summary.jffs2 \
-	"
-
-MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia alsa iwmmxt"
-
-# to program the compulab NAND flash, the following scheme is suggested.  Create
-# a small rootfs that can fit in NOR flash using the following config:
-#   - Angstrom distro
-#   - uclibc (set ANGSTROM_MODE = "uclibc" in local.conf)
-#   - angstrom-minimal-image-with-mtd-utils bitbake target
-#   - put the following in your local.conf
-#     - IMAGE_FSTYPES = "jffs2 tar cpio.gz"
-# now, when you build the image, a cpio.gz will be generated
-# that can be used as an initramfs.  You can boot into this image and then
-# program the main rootfs jffs2 image in NAND flash using mtd-utils
-# you can select booting the initramfs, or the main nand rootfs by using
-# the "ramdisk on", or "ramdisk off" commands in the bootloader
-#
-
-