diff options
author | Marcin Juszkiewicz <hrw@openedhand.com> | 2007-10-11 15:45:13 +0000 |
---|---|---|
committer | Marcin Juszkiewicz <hrw@openedhand.com> | 2007-10-11 15:45:13 +0000 |
commit | 7ddb194822b5b84e7396ae983974c5ec9ca1f132 (patch) | |
tree | 6a3a558d7ac34eeb8b093715fb07ba46db42b216 /meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch | |
parent | 5a409e5b5327bacb4508d2c4b118985b6cbcc199 (diff) | |
download | openembedded-core-7ddb194822b5b84e7396ae983974c5ec9ca1f132.tar.gz openembedded-core-7ddb194822b5b84e7396ae983974c5ec9ca1f132.tar.bz2 openembedded-core-7ddb194822b5b84e7396ae983974c5ec9ca1f132.tar.xz openembedded-core-7ddb194822b5b84e7396ae983974c5ec9ca1f132.zip |
linux-rp: update 2.6.23-rc4 to 2.6.23 (non-default as c7x0, akita, zylonite, hx2000 breaks)
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2861 311d38ba-8fff-0310-9ca6-ca027cbcb966
Diffstat (limited to 'meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch')
-rw-r--r-- | meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch | 5975 |
1 files changed, 0 insertions, 5975 deletions
diff --git a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch b/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch deleted file mode 100644 index 1fba1a3b0..000000000 --- a/meta/packages/linux/linux-rp-2.6.22+2.6.23-rc4/arm_pxa_20070923.patch +++ /dev/null @@ -1,5975 +0,0 @@ -# Base git commit: da8f153e51290e7438ba7da66234a864e5d3e1c1 -# (Revert "x86_64: Quicklist support for x86_64") -# -# Author: eric miao (Wed Sep 12 03:13:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:19 BST 2007) -# -# [ARM] pxa: PXA3xx base support -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# arch/arm/Kconfig | 6 -# arch/arm/boot/compressed/head-xscale.S | 4 -# arch/arm/mach-pxa/Kconfig | 30 + -# arch/arm/mach-pxa/Makefile | 9 -# arch/arm/mach-pxa/clock.c | 79 ++-- -# arch/arm/mach-pxa/clock.h | 43 ++ -# arch/arm/mach-pxa/devices.h | 3 -# arch/arm/mach-pxa/generic.c | 146 ++++--- -# arch/arm/mach-pxa/generic.h | 26 + -# arch/arm/mach-pxa/irq.c | 80 ---- -# arch/arm/mach-pxa/mfp.c | 235 ++++++++++++ -# arch/arm/mach-pxa/pxa25x.c | 90 ++++ -# arch/arm/mach-pxa/pxa27x.c | 127 ++++++ -# arch/arm/mach-pxa/pxa300.c | 93 +++++ -# arch/arm/mach-pxa/pxa320.c | 88 ++++ -# arch/arm/mach-pxa/pxa3xx.c | 216 +++++++++++ -# arch/arm/mach-pxa/time.c | 53 ++ -# arch/arm/mach-pxa/zylonite.c | 184 +++++++++ -# arch/arm/mach-pxa/zylonite_pxa300.c | 188 ++++++++++ -# arch/arm/mach-pxa/zylonite_pxa320.c | 173 +++++++++ -# arch/arm/mm/Kconfig | 4 -# drivers/i2c/busses/i2c-pxa.c | 45 +- -# drivers/input/keyboard/pxa27x_keyboard.c | 25 + -# drivers/mmc/host/pxamci.c | 43 +- -# drivers/mmc/host/pxamci.h | 14 -# drivers/mtd/maps/lubbock-flash.c | 9 -# drivers/mtd/maps/mainstone-flash.c | 5 -# drivers/net/irda/pxaficp_ir.c | 51 ++ -# drivers/net/smc91x.c | 62 --- -# drivers/net/smc91x.h | 71 +++ -# drivers/serial/pxa.c | 163 ++++---- -# drivers/serial/serial_core.c | 18 -# drivers/usb/gadget/pxa2xx_udc.c | 68 ++- -# drivers/usb/gadget/pxa2xx_udc.h | 1 -# drivers/video/pxafb.c | 36 + -# drivers/video/pxafb.h | 1 -# include/asm-arm/arch-pxa/hardware.h | 72 +++ -# include/asm-arm/arch-pxa/irqs.h | 6 -# include/asm-arm/arch-pxa/mfp-pxa300.h | 574 ++++++++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/mfp-pxa320.h | 446 ++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/mfp.h | 576 +++++++++++++++++++++++++++++++ -# include/asm-arm/arch-pxa/pxa-regs.h | 2 -# include/asm-arm/arch-pxa/pxa3xx-regs.h | 75 ++++ -# include/asm-arm/arch-pxa/timex.h | 2 -# include/asm-arm/arch-pxa/zylonite.h | 35 + -# 45 files changed, 3825 insertions(+), 452 deletions(-) -# create mode 100644 arch/arm/mach-pxa/mfp.c -# create mode 100644 arch/arm/mach-pxa/pxa300.c -# create mode 100644 arch/arm/mach-pxa/pxa320.c -# create mode 100644 arch/arm/mach-pxa/pxa3xx.c -# create mode 100644 arch/arm/mach-pxa/zylonite.c -# create mode 100644 arch/arm/mach-pxa/zylonite_pxa300.c -# create mode 100644 arch/arm/mach-pxa/zylonite_pxa320.c -# create mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h -# create mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h -# create mode 100644 include/asm-arm/arch-pxa/mfp.h -# create mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h -# create mode 100644 include/asm-arm/arch-pxa/zylonite.h -# -# Author: Russell King (Sat Sep 1 21:27:18 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:17 BST 2007) -# -# [NET] smc91x: fix PXA DMA support code -# -# The PXA DMA support code for smc91x doesn't pass a struct device to -# the dma_*map_single() functions, which leads to an oops in the dma -# bounce code. We have a struct device which was used to probe the -# SMC chip. Use it. -# -# (This patch is slightly larger because it requires struct smc_local -# to move into the header file.) -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:25:09 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:12 BST 2007) -# -# [SERIAL] Fix console initialisation ordering -# -# Ensure pm callback is called upon initialisation to place port in -# correct power saving state. Ensure console is initialised prior -# to deciding whether to power down the port. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:21:51 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:07 BST 2007) -# -# [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:28:55 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:03 BST 2007) -# -# [ARM] lubbock, mainstone: only initialise if running on that platform -# -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:22:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:18:01 BST 2007) -# -# [ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.c -# -# a function pxa_init_irq_set_wake() was introduced, so that -# processor specific code could install their own version -# -# code setting PFER and PRER registers within pxa_gpio_irq_type -# are removed, and the edge configuration is postponed to the -# (*set_wake) and copies the GRER and GFER register, which will -# always be set up correctly by pxa_gpio_irq_type() -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:18:47 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:59 BST 2007) -# -# [ARM] 4559/1: pxa: make PXA_LAST_GPIO a run-time variable -# -# This definition produces processor specific code in generic function -# pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x -# and pxa27x in a single zImage. -# -# As David Brownell suggests, make it a run-time variable and initialize -# at run-time according to the number of GPIOs on the processor. For now -# the initialization happens in pxa_init_irq_gpio(), since there is -# already a parameter for that, besides, this is and MUST be earlier -# than any subsequent calls to pxa_gpio_mode(). -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Aug 29 10:15:41 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:57 BST 2007) -# -# [ARM] 4558/1: pxa: remove MACH_TYPE_LUBBOCK assignment and leave it to boot loader -# -# since both u-boot and blob support passing MACH_TYPE_LUBBOCK to the -# kernel, it should be quite safe to remove this -# -# Signed-off-by: eric miao -# Acked-by: Nicolas Pitre -# Signed-off-by: Russell King -# -# -# Author: eric miao (Wed Sep 12 03:13:17 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:55 BST 2007) -# -# [ARM] pxa: add PXA3 cpu_is_xxx() macros -# -# Extracted from patch by Eric Miao, this adds the cpu_is_xxx() macros -# for identifying PXA3 SoCs. -# -# Signed-off-by: eric miao -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:38:32 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:51 BST 2007) -# -# [ARM] pxa: Make CPU_XSCALE depend on PXA25x or PXA27x -# -# PXA3 SoCs are supported by the Xscale3 CPU code rather than the -# Xscale CPU code. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Wed Sep 19 09:33:55 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:48 BST 2007) -# -# [ARM] pxa: mark pxa_set_cken deprecated -# -# Allow the generic clock support code to fiddle with the CKEN register -# and mark pxa_set_cken() deprecated. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:34:37 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:43 BST 2007) -# -# [ARM] pxa: remove get_lcdclk_frequency_10khz() -# -# get_lcdclk_frequency_10khz() is now redundant, remove it. Hide -# pxa27x_get_lcdclk_frequency_10khz() from public view. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sun Sep 2 17:09:23 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:39 BST 2007) -# -# [ARM] pxa: update pxa irda driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sun Sep 2 17:08:42 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:36 BST 2007) -# -# [ARM] pxa: Make STUART and FICP clocks available -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:33:35 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:34 BST 2007) -# -# [ARM] pxa: update PXA UDC driver to use clk support -# -# Note: this produces a WARN() dump. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:28:15 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:31 BST 2007) -# -# [ARM] pxa: update pxa serial driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:20:03 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:27 BST 2007) -# -# [ARM] pxa: update PXA MMC interface driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:19:39 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:23 BST 2007) -# -# [ARM] pxa: update pxa27x keypad driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:19:10 BST 2007) -# Committer: Russell King (Sun Sep 23 14:17:19 BST 2007) -# -# [ARM] pxa: update pxa i2c driver to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:18:42 BST 2007) -# Committer: Russell King (Sun Sep 23 14:16:50 BST 2007) -# -# [ARM] pxa: update pxafb to use clk support -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:18:02 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007) -# -# [ARM] pxa: introduce clk support for PXA SoC clocks -# -# Signed-off-by: Russell King -# -# create mode 100644 arch/arm/mach-pxa/clock.h -# -# Author: Russell King (Mon Aug 20 10:09:18 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:09 BST 2007) -# -# [ARM] pxa: make pxa27x devices globally visible -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 10:07:44 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007) -# -# [ARM] pxa: fix naming of memory/lcd/core clock functions -# -# Rename pxa25x and pxa27x memory/lcd/core clock functions, and -# select the correct version at run time. -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Mon Aug 20 09:47:41 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:08 BST 2007) -# -# [ARM] pxa: convert PXA serial drivers to use platform resources -# -# Signed-off-by: Russell King -# -# -# Author: Russell King (Sat Sep 1 21:12:50 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:07 BST 2007) -# -# [ARM] pxa: make pxa timer initialisation select clock rate at runtime -# -# Rather than using the compile-time constant CLOCK_TICK_RATE, select -# the clock tick rate at run time. We organise the selection so that -# PXA3 automatically falls out with the right tick rate. -# -# Signed-off-by: Russell King -# -# -# Author: Nicolas Pitre (Fri Aug 17 16:55:22 BST 2007) -# Committer: Russell King (Sat Sep 22 20:48:05 BST 2007) -# -# [ARM] 4550/1: sched_clock on PXA should cope with run time clock rate selection -# -# The previous implementation was relying on compile time optimizations -# based on a constant clock rate. However, support for different PXA -# flavors in the same kernel binary requires that the clock be selected at -# run time, so here it is. -# -# Let's move this code to a more appropriate location while at it. -# -# Signed-off-by: Nicolas Pitre -# Signed-off-by: Russell King -# -# -Index: linux-2.6.22/arch/arm/Kconfig -=================================================================== ---- linux-2.6.22.orig/arch/arm/Kconfig 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/arch/arm/Kconfig 2007-09-24 20:57:20.000000000 +0200 -@@ -336,14 +336,14 @@ - This enables support for Philips PNX4008 mobile platform. - - config ARCH_PXA -- bool "PXA2xx-based" -+ bool "PXA2xx/PXA3xx-based" - depends on MMU - select ARCH_MTD_XIP - select GENERIC_GPIO - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - help -- Support for Intel's PXA2XX processor line. -+ Support for Intel/Marvell's PXA2xx/PXA3xx processor line. - - config ARCH_RPC - bool "RiscPC" -@@ -486,7 +486,7 @@ - config IWMMXT - bool "Enable iWMMXt support" - depends on CPU_XSCALE || CPU_XSC3 -- default y if PXA27x -+ default y if PXA27x || PXA3xx - help - Enable support for iWMMXt context switching at run time if - running on a CPU that supports it. -Index: linux-2.6.22/arch/arm/boot/compressed/head-xscale.S -=================================================================== ---- linux-2.6.22.orig/arch/arm/boot/compressed/head-xscale.S 2007-09-24 20:56:50.000000000 +0200 -+++ linux-2.6.22/arch/arm/boot/compressed/head-xscale.S 2007-09-24 21:03:05.000000000 +0200 -@@ -33,10 +33,6 @@ - bic r0, r0, #0x1000 @ clear Icache - mcr p15, 0, r0, c1, c0, 0 - --#ifdef CONFIG_ARCH_LUBBOCK -- mov r7, #MACH_TYPE_LUBBOCK --#endif -- - #ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP - #endif -Index: linux-2.6.22/arch/arm/mach-pxa/Kconfig -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/Kconfig 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/Kconfig 2007-09-24 20:57:20.000000000 +0200 -@@ -1,6 +1,24 @@ - if ARCH_PXA - --menu "Intel PXA2xx Implementations" -+menu "Intel PXA2xx/PXA3xx Implementations" -+ -+if PXA3xx -+ -+menu "Supported PXA3xx Processor Variants" -+ -+config CPU_PXA300 -+ bool "PXA300 (codename Monahans-L)" -+ -+config CPU_PXA310 -+ bool "PXA310 (codename Monahans-LV)" -+ select CPU_PXA300 -+ -+config CPU_PXA320 -+ bool "PXA320 (codename Monahans-P)" -+ -+endmenu -+ -+endif - - choice - prompt "Select target board" -@@ -41,6 +59,11 @@ - bool "CompuLab EM-x270 platform" - select PXA27x - -+ -+config MACH_ZYLONITE -+ bool "PXA3xx Development Platform" -+ select PXA3xx -+ - config MACH_HX2750 - bool "HP iPAQ hx2750" - select PXA27x -@@ -228,6 +251,11 @@ - help - Select code specific to PXA27x variants - -+config PXA3xx -+ bool -+ help -+ Select code specific to PXA3xx variants -+ - config PXA_SHARP_C7xx - bool - select PXA_SSP -Index: linux-2.6.22/arch/arm/mach-pxa/Makefile -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/Makefile 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/Makefile 2007-09-24 21:03:57.000000000 +0200 -@@ -6,6 +6,9 @@ - obj-y += clock.o generic.o irq.o dma.o time.o - obj-$(CONFIG_PXA25x) += pxa25x.o - obj-$(CONFIG_PXA27x) += pxa27x.o -+obj-$(CONFIG_PXA3xx) += pxa3xx.o mfp.o -+obj-$(CONFIG_CPU_PXA300) += pxa300.o -+obj-$(CONFIG_CPU_PXA320) += pxa320.o - - # Specific board support - obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o -@@ -19,6 +22,12 @@ - obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o - obj-$(CONFIG_MACH_TOSA) += tosa.o - obj-$(CONFIG_MACH_EM_X270) += em-x270.o -+ifeq ($(CONFIG_MACH_ZYLONITE),y) -+ obj-y += zylonite.o -+ obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o -+ obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o -+endif -+ - obj-$(CONFIG_MACH_HX2750) += hx2750.o hx2750_test.o - obj-$(CONFIG_MACH_HTCUNIVERSAL) += htcuniversal/ - -Index: linux-2.6.22/arch/arm/mach-pxa/clock.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/clock.c 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/clock.c 2007-09-24 20:57:20.000000000 +0200 -@@ -9,19 +9,15 @@ - #include <linux/string.h> - #include <linux/clk.h> - #include <linux/spinlock.h> -+#include <linux/platform_device.h> -+#include <linux/delay.h> - - #include <asm/arch/pxa-regs.h> - #include <asm/hardware.h> - --struct clk { -- struct list_head node; -- unsigned long rate; -- struct module *owner; -- const char *name; -- unsigned int enabled; -- void (*enable)(void); -- void (*disable)(void); --}; -+#include "devices.h" -+#include "generic.h" -+#include "clock.h" - - static LIST_HEAD(clocks); - static DEFINE_MUTEX(clocks_mutex); -@@ -33,7 +29,8 @@ - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { -- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { -+ if (strcmp(id, p->name) == 0 && -+ (p->dev == NULL || p->dev == dev)) { - clk = p; - break; - } -@@ -46,7 +43,6 @@ - - void clk_put(struct clk *clk) - { -- module_put(clk->owner); - } - EXPORT_SYMBOL(clk_put); - -@@ -56,8 +52,12 @@ - - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) -- clk->enable(); -+ clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -+ -+ if (clk->delay) -+ udelay(clk->delay); -+ - return 0; - } - EXPORT_SYMBOL(clk_enable); -@@ -70,54 +70,75 @@ - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) -- clk->disable(); -+ clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - } - EXPORT_SYMBOL(clk_disable); - - unsigned long clk_get_rate(struct clk *clk) - { -- return clk->rate; -+ unsigned long rate; -+ -+ rate = clk->rate; -+ if (clk->ops->getrate) -+ rate = clk->ops->getrate(clk); -+ -+ return rate; - } - EXPORT_SYMBOL(clk_get_rate); - - --static void clk_gpio27_enable(void) -+static void clk_gpio27_enable(struct clk *clk) - { - pxa_gpio_mode(GPIO11_3_6MHz_MD); - } - --static void clk_gpio27_disable(void) -+static void clk_gpio27_disable(struct clk *clk) - { - } - --static struct clk clk_gpio27 = { -- .name = "GPIO27_CLK", -- .rate = 3686400, -+static const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, - }; - --int clk_register(struct clk *clk) -+ -+void clk_cken_enable(struct clk *clk) - { -- mutex_lock(&clocks_mutex); -- list_add(&clk->node, &clocks); -- mutex_unlock(&clocks_mutex); -- return 0; -+ CKEN |= 1 << clk->cken; - } --EXPORT_SYMBOL(clk_register); - --void clk_unregister(struct clk *clk) -+void clk_cken_disable(struct clk *clk) - { -+ CKEN &= ~(1 << clk->cken); -+} -+ -+const struct clkops clk_cken_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+}; -+ -+static struct clk common_clks[] = { -+ { -+ .name = "GPIO27_CLK", -+ .ops = &clk_gpio27_ops, -+ .rate = 3686400, -+ }, -+}; -+ -+void clks_register(struct clk *clks, size_t num) -+{ -+ int i; -+ - mutex_lock(&clocks_mutex); -- list_del(&clk->node); -+ for (i = 0; i < num; i++) -+ list_add(&clks[i].node, &clocks); - mutex_unlock(&clocks_mutex); - } --EXPORT_SYMBOL(clk_unregister); - - static int __init clk_init(void) - { -- clk_register(&clk_gpio27); -+ clks_register(common_clks, ARRAY_SIZE(common_clks)); - return 0; - } - arch_initcall(clk_init); -Index: linux-2.6.22/arch/arm/mach-pxa/clock.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/clock.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,43 @@ -+struct clk; -+ -+struct clkops { -+ void (*enable)(struct clk *); -+ void (*disable)(struct clk *); -+ unsigned long (*getrate)(struct clk *); -+}; -+ -+struct clk { -+ struct list_head node; -+ const char *name; -+ struct device *dev; -+ const struct clkops *ops; -+ unsigned long rate; -+ unsigned int cken; -+ unsigned int delay; -+ unsigned int enabled; -+}; -+ -+#define INIT_CKEN(_name, _cken, _rate, _delay, _dev) \ -+ { \ -+ .name = _name, \ -+ .dev = _dev, \ -+ .ops = &clk_cken_ops, \ -+ .rate = _rate, \ -+ .cken = CKEN_##_cken, \ -+ .delay = _delay, \ -+ } -+ -+#define INIT_CK(_name, _cken, _ops, _dev) \ -+ { \ -+ .name = _name, \ -+ .dev = _dev, \ -+ .ops = _ops, \ -+ .cken = CKEN_##_cken, \ -+ } -+ -+extern const struct clkops clk_cken_ops; -+ -+void clk_cken_enable(struct clk *clk); -+void clk_cken_disable(struct clk *clk); -+ -+void clks_register(struct clk *clks, size_t num); -Index: linux-2.6.22/arch/arm/mach-pxa/devices.h -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/devices.h 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/devices.h 2007-09-24 20:57:20.000000000 +0200 -@@ -9,3 +9,6 @@ - extern struct platform_device pxa_device_i2s; - extern struct platform_device pxa_device_ficp; - extern struct platform_device pxa_device_rtc; -+ -+extern struct platform_device pxa27x_device_i2c_power; -+extern struct platform_device pxa27x_device_ohci; -Index: linux-2.6.22/arch/arm/mach-pxa/generic.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/generic.c 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/generic.c 2007-09-24 20:57:20.000000000 +0200 -@@ -25,10 +25,6 @@ - #include <linux/pm.h> - #include <linux/string.h> - --#include <linux/sched.h> --#include <asm/cnt32_to_63.h> --#include <asm/div64.h> -- - #include <asm/hardware.h> - #include <asm/irq.h> - #include <asm/system.h> -@@ -48,66 +44,39 @@ - #include "generic.h" - - /* -- * This is the PXA2xx sched_clock implementation. This has a resolution -- * of at least 308ns and a maximum value that depends on the value of -- * CLOCK_TICK_RATE. -- * -- * The return value is guaranteed to be monotonic in that range as -- * long as there is always less than 582 seconds between successive -- * calls to this function. -+ * Get the clock frequency as reflected by CCCR and the turbo flag. -+ * We assume these values have been applied via a fcs. -+ * If info is not 0 we also display the current settings. - */ --unsigned long long sched_clock(void) -+unsigned int get_clk_frequency_khz(int info) - { -- unsigned long long v = cnt32_to_63(OSCR); -- /* Note: top bit ov v needs cleared unless multiplier is even. */ -- --#if CLOCK_TICK_RATE == 3686400 -- /* 1E9 / 3686400 => 78125 / 288, max value = 32025597s (370 days). */ -- /* The <<1 is used to get rid of tick.hi top bit */ -- v *= 78125<<1; -- do_div(v, 288<<1); --#elif CLOCK_TICK_RATE == 3250000 -- /* 1E9 / 3250000 => 4000 / 13, max value = 709490156s (8211 days) */ -- v *= 4000; -- do_div(v, 13); --#elif CLOCK_TICK_RATE == 3249600 -- /* 1E9 / 3249600 => 625000 / 2031, max value = 4541295s (52 days) */ -- v *= 625000; -- do_div(v, 2031); --#else --#warning "consider fixing sched_clock for your value of CLOCK_TICK_RATE" -- /* -- * 96-bit math to perform tick * NSEC_PER_SEC / CLOCK_TICK_RATE for -- * any value of CLOCK_TICK_RATE. Max value is in the 80 thousand -- * years range and truncation to unsigned long long limits it to -- * sched_clock's max range of ~584 years. This is nice but with -- * higher computation cost. -- */ -- { -- union { -- unsigned long long val; -- struct { unsigned long lo, hi; }; -- } x; -- unsigned long long y; -- -- x.val = v; -- x.hi &= 0x7fffffff; -- y = (unsigned long long)x.lo * NSEC_PER_SEC; -- x.lo = y; -- y = (y >> 32) + (unsigned long long)x.hi * NSEC_PER_SEC; -- x.hi = do_div(y, CLOCK_TICK_RATE); -- do_div(x.val, CLOCK_TICK_RATE); -- x.hi += y; -- v = x.val; -- } --#endif -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ return pxa25x_get_clk_frequency_khz(info); -+ else if (cpu_is_pxa27x()) -+ return pxa27x_get_clk_frequency_khz(info); -+ else -+ return pxa3xx_get_clk_frequency_khz(info); -+} -+EXPORT_SYMBOL(get_clk_frequency_khz); - -- return v; -+/* -+ * Return the current memory clock frequency in units of 10kHz -+ */ -+unsigned int get_memclk_frequency_10khz(void) -+{ -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ return pxa25x_get_memclk_frequency_10khz(); -+ else if (cpu_is_pxa27x()) -+ return pxa27x_get_memclk_frequency_10khz(); -+ else -+ return pxa3xx_get_memclk_frequency_10khz(); - } -+EXPORT_SYMBOL(get_memclk_frequency_10khz); - - /* - * Handy function to set GPIO alternate functions - */ -+int pxa_last_gpio; - - int pxa_gpio_mode(int gpio_mode) - { -@@ -116,7 +85,7 @@ - int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8; - int gafr; - -- if (gpio > PXA_LAST_GPIO) -+ if (gpio > pxa_last_gpio) - return -EINVAL; - - local_irq_save(flags); -@@ -160,7 +129,7 @@ - /* - * Routine to safely enable or disable a clock in the CKEN - */ --void pxa_set_cken(int clock, int enable) -+void __pxa_set_cken(int clock, int enable) - { - unsigned long flags; - local_irq_save(flags); -@@ -173,7 +142,7 @@ - local_irq_restore(flags); - } - --EXPORT_SYMBOL(pxa_set_cken); -+EXPORT_SYMBOL(__pxa_set_cken); - - /* - * Intel PXA2xx internal register mapping. -@@ -330,21 +299,80 @@ - pxa_device_fb.dev.parent = parent_dev; - } - -+static struct resource pxa_resource_ffuart[] = { -+ { -+ .start = __PREG(FFUART), -+ .end = __PREG(FFUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_FFUART, -+ .end = IRQ_FFUART, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ - struct platform_device pxa_device_ffuart= { - .name = "pxa2xx-uart", - .id = 0, -+ .resource = pxa_resource_ffuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_ffuart), -+}; -+ -+static struct resource pxa_resource_btuart[] = { -+ { -+ .start = __PREG(BTUART), -+ .end = __PREG(BTUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_BTUART, -+ .end = IRQ_BTUART, -+ .flags = IORESOURCE_IRQ, -+ } - }; -+ - struct platform_device pxa_device_btuart = { - .name = "pxa2xx-uart", - .id = 1, -+ .resource = pxa_resource_btuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_btuart), - }; -+ -+static struct resource pxa_resource_stuart[] = { -+ { -+ .start = __PREG(STUART), -+ .end = __PREG(STUART) + 35, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_STUART, -+ .end = IRQ_STUART, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ - struct platform_device pxa_device_stuart = { - .name = "pxa2xx-uart", - .id = 2, -+ .resource = pxa_resource_stuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_stuart), -+}; -+ -+static struct resource pxa_resource_hwuart[] = { -+ { -+ .start = __PREG(HWUART), -+ .end = __PREG(HWUART) + 47, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_HWUART, -+ .end = IRQ_HWUART, -+ .flags = IORESOURCE_IRQ, -+ } - }; -+ - struct platform_device pxa_device_hwuart = { - .name = "pxa2xx-uart", - .id = 3, -+ .resource = pxa_resource_hwuart, -+ .num_resources = ARRAY_SIZE(pxa_resource_hwuart), - }; - - void __init pxa_set_ffuart_info(struct platform_pxa_serial_funcs *info) -Index: linux-2.6.22/arch/arm/mach-pxa/generic.h -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/generic.h 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/generic.h 2007-09-24 20:57:20.000000000 +0200 -@@ -15,14 +15,40 @@ - extern void __init pxa_init_irq_low(void); - extern void __init pxa_init_irq_high(void); - extern void __init pxa_init_irq_gpio(int gpio_nr); -+extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)); - extern void __init pxa25x_init_irq(void); - extern void __init pxa27x_init_irq(void); -+extern void __init pxa3xx_init_irq(void); - extern void __init pxa_map_io(void); - - extern unsigned int get_clk_frequency_khz(int info); -+extern int pxa_last_gpio; - - #define SET_BANK(__nr,__start,__size) \ - mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) - -+#ifdef CONFIG_PXA25x -+extern unsigned pxa25x_get_clk_frequency_khz(int); -+extern unsigned pxa25x_get_memclk_frequency_10khz(void); -+#else -+#define pxa25x_get_clk_frequency_khz(x) (0) -+#define pxa25x_get_memclk_frequency_10khz() (0) -+#endif -+ -+#ifdef CONFIG_PXA27x -+extern unsigned pxa27x_get_clk_frequency_khz(int); -+extern unsigned pxa27x_get_memclk_frequency_10khz(void); -+#else -+#define pxa27x_get_clk_frequency_khz(x) (0) -+#define pxa27x_get_memclk_frequency_10khz() (0) -+#endif -+ -+#ifdef CONFIG_PXA3xx -+extern unsigned pxa3xx_get_clk_frequency_khz(int); -+extern unsigned pxa3xx_get_memclk_frequency_10khz(void); -+#else -+#define pxa3xx_get_clk_frequency_khz(x) (0) -+#define pxa3xx_get_memclk_frequency_10khz() (0) -+#endif -Index: linux-2.6.22/arch/arm/mach-pxa/irq.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/irq.c 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/irq.c 2007-09-24 20:57:20.000000000 +0200 -@@ -38,33 +38,11 @@ - ICMR |= (1 << irq); - } - --static int pxa_set_wake(unsigned int irq, unsigned int on) --{ -- u32 mask; -- -- switch (irq) { -- case IRQ_RTCAlrm: -- mask = PWER_RTC; -- break; --#ifdef CONFIG_PXA27x -- /* REVISIT can handle USBH1, USBH2, USB, MSL, USIM, ... */ --#endif -- default: -- return -EINVAL; -- } -- if (on) -- PWER |= mask; -- else -- PWER &= ~mask; -- return 0; --} -- - static struct irq_chip pxa_internal_chip_low = { - .name = "SC", - .ack = pxa_mask_low_irq, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, -- .set_wake = pxa_set_wake, - }; - - void __init pxa_init_irq_low(void) -@@ -87,7 +65,7 @@ - } - } - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - - /* - * This is for the second set of internal IRQs as found on the PXA27x. -@@ -125,26 +103,6 @@ - } - #endif - --/* Note that if an input/irq line ever gets changed to an output during -- * suspend, the relevant PWER, PRER, and PFER bits should be cleared. -- */ --#ifdef CONFIG_PXA27x -- --/* PXA27x: Various gpios can issue wakeup events. This logic only -- * handles the simple cases, not the WEMUX2 and WEMUX3 options -- */ --#define PXA27x_GPIO_NOWAKE_MASK \ -- ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) --#define WAKEMASK(gpio) \ -- (((gpio) <= 15) \ -- ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ -- : ((gpio == 35) ? (1 << 24) : 0)) --#else -- --/* pxa 210, 250, 255, 26x: gpios 0..15 can issue wakeups */ --#define WAKEMASK(gpio) (((gpio) <= 15) ? (1 << (gpio)) : 0) --#endif -- - /* - * PXA GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. -@@ -158,11 +116,9 @@ - static int pxa_gpio_irq_type(unsigned int irq, unsigned int type) - { - int gpio, idx; -- u32 mask; - - gpio = IRQ_TO_GPIO(irq); - idx = gpio >> 5; -- mask = WAKEMASK(gpio); - - if (type == IRQT_PROBE) { - /* Don't mess with enabled GPIOs using preconfigured edges or -@@ -182,19 +138,15 @@ - if (type & __IRQT_RISEDGE) { - /* printk("rising "); */ - __set_bit (gpio, GPIO_IRQ_rising_edge); -- PRER |= mask; - } else { - __clear_bit (gpio, GPIO_IRQ_rising_edge); -- PRER &= ~mask; - } - - if (type & __IRQT_FALEDGE) { - /* printk("falling "); */ - __set_bit (gpio, GPIO_IRQ_falling_edge); -- PFER |= mask; - } else { - __clear_bit (gpio, GPIO_IRQ_falling_edge); -- PFER &= ~mask; - } - - /* printk("edges\n"); */ -@@ -213,29 +165,12 @@ - GEDR0 = (1 << (irq - IRQ_GPIO0)); - } - --static int pxa_set_gpio_wake(unsigned int irq, unsigned int on) --{ -- int gpio = IRQ_TO_GPIO(irq); -- u32 mask = WAKEMASK(gpio); -- -- if (!mask) -- return -EINVAL; -- -- if (on) -- PWER |= mask; -- else -- PWER &= ~mask; -- return 0; --} -- -- - static struct irq_chip pxa_low_gpio_chip = { - .name = "GPIO-l", - .ack = pxa_ack_low_gpio, - .mask = pxa_mask_low_irq, - .unmask = pxa_unmask_low_irq, - .set_type = pxa_gpio_irq_type, -- .set_wake = pxa_set_gpio_wake, - }; - - /* -@@ -342,13 +277,14 @@ - .mask = pxa_mask_muxed_gpio, - .unmask = pxa_unmask_muxed_gpio, - .set_type = pxa_gpio_irq_type, -- .set_wake = pxa_set_gpio_wake, - }; - - void __init pxa_init_irq_gpio(int gpio_nr) - { - int irq, i; - -+ pxa_last_gpio = gpio_nr - 1; -+ - /* clear all GPIO edge detects */ - for (i = 0; i < gpio_nr; i += 32) { - GFER(i) = 0; -@@ -375,3 +311,13 @@ - set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low); - set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler); - } -+ -+void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int)) -+{ -+ pxa_internal_chip_low.set_wake = set_wake; -+#ifdef CONFIG_PXA27x -+ pxa_internal_chip_high.set_wake = set_wake; -+#endif -+ pxa_low_gpio_chip.set_wake = set_wake; -+ pxa_muxed_gpio_chip.set_wake = set_wake; -+} -Index: linux-2.6.22/arch/arm/mach-pxa/mfp.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/mfp.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,235 @@ -+/* -+ * linux/arch/arm/mach-pxa/mfp.c -+ * -+ * PXA3xx Multi-Function Pin Support -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/io.h> -+ -+#include <asm/hardware.h> -+#include <asm/arch/mfp.h> -+ -+/* mfp_spin_lock is used to ensure that MFP register configuration -+ * (most likely a read-modify-write operation) is atomic, and that -+ * mfp_table[] is consistent -+ */ -+static DEFINE_SPINLOCK(mfp_spin_lock); -+ -+static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); -+static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; -+ -+#define mfpr_readl(off) \ -+ __raw_readl(mfpr_mmio_base + (off)) -+ -+#define mfpr_writel(off, val) \ -+ __raw_writel(val, mfpr_mmio_base + (off)) -+ -+/* -+ * perform a read-back of any MFPR register to make sure the -+ * previous writings are finished -+ */ -+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) -+ -+static inline void __mfp_config(int pin, unsigned long val) -+{ -+ unsigned long off = mfp_table[pin].mfpr_off; -+ -+ mfp_table[pin].mfpr_val = val; -+ mfpr_writel(off, val); -+} -+ -+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num) -+{ -+ int i, pin; -+ unsigned long val, flags; -+ mfp_cfg_t *mfp_cfg = mfp_cfgs; -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ for (i = 0; i < num; i++, mfp_cfg++) { -+ pin = MFP_CFG_PIN(*mfp_cfg); -+ val = MFP_CFG_VAL(*mfp_cfg); -+ -+ BUG_ON(pin >= MFP_PIN_MAX); -+ -+ __mfp_config(pin, val); -+ } -+ -+ mfpr_sync(); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+unsigned long pxa3xx_mfp_read(int mfp) -+{ -+ unsigned long val, flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ val = mfpr_readl(mfp_table[mfp].mfpr_off); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+ -+ return val; -+} -+ -+void pxa3xx_mfp_write(int mfp, unsigned long val) -+{ -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ mfpr_writel(mfp_table[mfp].mfpr_off, val); -+ mfpr_sync(); -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_afds(int mfp, int af, int ds) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK); -+ mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) | -+ ((ds & 0x7) << MFPR_DRV_OFFSET)); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_rdh(int mfp, int rdh) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_RDH_MASK; -+ -+ if (likely(rdh)) -+ mfpr_val |= (1u << MFPR_SS_OFFSET); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_lpm(int mfp, int lpm) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_LPM_MASK; -+ -+ if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET; -+ if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET; -+ if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET; -+ if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET; -+ if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET; -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_pull(int mfp, int pull) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ mfpr_val &= ~MFPR_PULL_MASK; -+ mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET); -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void pxa3xx_mfp_set_edge(int mfp, int edge) -+{ -+ uint32_t mfpr_off, mfpr_val; -+ unsigned long flags; -+ -+ BUG_ON(mfp >= MFP_PIN_MAX); -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ mfpr_off = mfp_table[mfp].mfpr_off; -+ mfpr_val = mfpr_readl(mfpr_off); -+ -+ mfpr_val &= ~MFPR_EDGE_MASK; -+ mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET; -+ mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET; -+ -+ mfpr_writel(mfpr_off, mfpr_val); -+ mfpr_sync(); -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -+{ -+ struct pxa3xx_mfp_addr_map *p; -+ unsigned long offset, flags; -+ int i; -+ -+ spin_lock_irqsave(&mfp_spin_lock, flags); -+ -+ for (p = map; p->start != MFP_PIN_INVALID; p++) { -+ offset = p->offset; -+ i = p->start; -+ -+ do { -+ mfp_table[i].mfpr_off = offset; -+ mfp_table[i].mfpr_val = 0; -+ offset += 4; i++; -+ } while ((i <= p->end) && (p->end != -1)); -+ } -+ -+ spin_unlock_irqrestore(&mfp_spin_lock, flags); -+} -+ -+void __init pxa3xx_init_mfp(void) -+{ -+ memset(mfp_table, 0, sizeof(mfp_table)); -+} -Index: linux-2.6.22/arch/arm/mach-pxa/pxa25x.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/pxa25x.c 2007-09-24 20:57:15.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/pxa25x.c 2007-09-24 20:57:20.000000000 +0200 -@@ -30,6 +30,7 @@ - - #include "generic.h" - #include "devices.h" -+#include "clock.h" - - /* - * Various clock factors driven by the CCCR register. -@@ -53,7 +54,7 @@ - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ --unsigned int get_clk_frequency_khz(int info) -+unsigned int pxa25x_get_clk_frequency_khz(int info) - { - unsigned long cccr, turbo; - unsigned int l, L, m, M, n2, N; -@@ -86,27 +87,48 @@ - return (turbo & 1) ? (N/1000) : (M/1000); - } - --EXPORT_SYMBOL(get_clk_frequency_khz); -- - /* - * Return the current memory clock frequency in units of 10kHz - */ --unsigned int get_memclk_frequency_10khz(void) -+unsigned int pxa25x_get_memclk_frequency_10khz(void) - { - return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000; - } - --EXPORT_SYMBOL(get_memclk_frequency_10khz); -- --/* -- * Return the current LCD clock frequency in units of 10kHz -- */ --unsigned int get_lcdclk_frequency_10khz(void) -+static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk) - { -- return get_memclk_frequency_10khz(); -+ return pxa25x_get_memclk_frequency_10khz() * 10000; - } - --EXPORT_SYMBOL(get_lcdclk_frequency_10khz); -+static const struct clkops clk_pxa25x_lcd_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+ .getrate = clk_pxa25x_lcd_getrate, -+}; -+ -+/* -+ * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) -+ * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz -+ * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) -+ */ -+static struct clk pxa25x_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev), -+ INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL), -+ INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev), -+ INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev), -+ INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev), -+ /* -+ INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), -+ INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP, 3686400, 0, NULL), -+ INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), -+ INIT_CKEN("NSSPCLK", NSSP, 3686400, 0, NULL), -+ */ -+ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), -+}; - - #ifdef CONFIG_PM - -@@ -207,10 +229,52 @@ - } - #endif - -+/* PXA25x: supports wakeup from GPIO0..GPIO15 and RTC alarm -+ */ -+ -+static int pxa25x_set_wake(unsigned int irq, unsigned int on) -+{ -+ int gpio = IRQ_TO_GPIO(irq); -+ uint32_t gpio_bit, mask = 0; -+ -+ if (gpio >= 0 && gpio <= 15) { -+ gpio_bit = GPIO_bit(gpio); -+ mask = gpio_bit; -+ if (on) { -+ if (GRER(gpio) | gpio_bit) -+ PRER |= gpio_bit; -+ else -+ PRER &= ~gpio_bit; -+ -+ if (GFER(gpio) | gpio_bit) -+ PFER |= gpio_bit; -+ else -+ PFER &= ~gpio_bit; -+ } -+ goto set_pwer; -+ } -+ -+ if (irq == IRQ_RTCAlrm) { -+ mask = PWER_RTC; -+ goto set_pwer; -+ } -+ -+ return -EINVAL; -+ -+set_pwer: -+ if (on) -+ PWER |= mask; -+ else -+ PWER &=~mask; -+ -+ return 0; -+} -+ - void __init pxa25x_init_irq(void) - { - pxa_init_irq_low(); - pxa_init_irq_gpio(85); -+ pxa_init_irq_set_wake(pxa25x_set_wake); - } - - static struct platform_device *pxa25x_devices[] __initdata = { -@@ -231,6 +295,8 @@ - int ret = 0; - - if (cpu_is_pxa21x() || cpu_is_pxa25x()) { -+ clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); -+ - if ((ret = pxa_init_dma(16))) - return ret; - #ifdef CONFIG_PM -Index: linux-2.6.22/arch/arm/mach-pxa/pxa27x.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/pxa27x.c 2007-09-24 20:57:15.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/pxa27x.c 2007-09-24 20:57:20.000000000 +0200 -@@ -27,6 +27,7 @@ - - #include "generic.h" - #include "devices.h" -+#include "clock.h" - - /* Crystal clock: 13MHz */ - #define BASE_CLK 13000000 -@@ -36,7 +37,7 @@ - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ --unsigned int get_clk_frequency_khz( int info) -+unsigned int pxa27x_get_clk_frequency_khz(int info) - { - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M, n2, N, S; -@@ -79,7 +80,7 @@ - * Return the current mem clock frequency in units of 10kHz as - * reflected by CCCR[A], B, and L - */ --unsigned int get_memclk_frequency_10khz(void) -+unsigned int pxa27x_get_memclk_frequency_10khz(void) - { - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M; -@@ -104,7 +105,7 @@ - /* - * Return the current LCD clock frequency in units of 10kHz as - */ --unsigned int get_lcdclk_frequency_10khz(void) -+static unsigned int pxa27x_get_lcdclk_frequency_10khz(void) - { - unsigned long ccsr; - unsigned int l, L, k, K; -@@ -120,9 +121,47 @@ - return (K / 10000); - } - --EXPORT_SYMBOL(get_clk_frequency_khz); --EXPORT_SYMBOL(get_memclk_frequency_10khz); --EXPORT_SYMBOL(get_lcdclk_frequency_10khz); -+static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) -+{ -+ return pxa27x_get_lcdclk_frequency_10khz() * 10000; -+} -+ -+static const struct clkops clk_pxa27x_lcd_ops = { -+ .enable = clk_cken_enable, -+ .disable = clk_cken_disable, -+ .getrate = clk_pxa27x_lcd_getrate, -+}; -+ -+static struct clk pxa27x_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa27x_lcd_ops, &pxa_device_fb.dev), -+ INIT_CK("CAMCLK", CAMERA, &clk_pxa27x_lcd_ops, NULL), -+ -+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), -+ -+ INIT_CKEN("I2SCLK", I2S, 14682000, 0, &pxa_device_i2s.dev), -+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), -+ INIT_CKEN("UDCCLK", USB, 48000000, 5, &pxa_device_udc.dev), -+ INIT_CKEN("MMCCLK", MMC, 19500000, 0, &pxa_device_mci.dev), -+ INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev), -+ -+ INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev), -+ INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), -+ INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), -+ -+ /* -+ INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP1, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP2, 13000000, 0, NULL), -+ INIT_CKEN("SSPCLK", SSP3, 13000000, 0, NULL), -+ INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), -+ INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), -+ INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), -+ INIT_CKEN("IMCLK", IM, 0, 0, NULL), -+ INIT_CKEN("MEMCLK", MEMC, 0, 0, NULL), -+ */ -+}; - - #ifdef CONFIG_PM - -@@ -269,6 +308,69 @@ - } - #endif - -+/* PXA27x: Various gpios can issue wakeup events. This logic only -+ * handles the simple cases, not the WEMUX2 and WEMUX3 options -+ */ -+#define PXA27x_GPIO_NOWAKE_MASK \ -+ ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2)) -+#define WAKEMASK(gpio) \ -+ (((gpio) <= 15) \ -+ ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \ -+ : ((gpio == 35) ? (1 << 24) : 0)) -+ -+static int pxa27x_set_wake(unsigned int irq, unsigned int on) -+{ -+ int gpio = IRQ_TO_GPIO(irq); -+ uint32_t mask; -+ -+ if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) { -+ if (WAKEMASK(gpio) == 0) -+ return -EINVAL; -+ -+ mask = WAKEMASK(gpio); -+ -+ if (on) { -+ if (GRER(gpio) | GPIO_bit(gpio)) -+ PRER |= mask; -+ else -+ PRER &= ~mask; -+ -+ if (GFER(gpio) | GPIO_bit(gpio)) -+ PFER |= mask; -+ else -+ PFER &= ~mask; -+ } -+ goto set_pwer; -+ } -+ -+ switch (irq) { -+ case IRQ_RTCAlrm: -+ mask = PWER_RTC; -+ break; -+ case IRQ_USB: -+ mask = 1u << 26; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+set_pwer: -+ if (on) -+ PWER |= mask; -+ else -+ PWER &=~mask; -+ -+ return 0; -+} -+ -+void __init pxa27x_init_irq(void) -+{ -+ pxa_init_irq_low(); -+ pxa_init_irq_high(); -+ pxa_init_irq_gpio(128); -+ pxa_init_irq_set_wake(pxa27x_set_wake); -+} -+ - /* - * device registration specific to PXA27x. - */ -@@ -288,7 +390,7 @@ - }, - }; - --static struct platform_device pxa27x_device_ohci = { -+struct platform_device pxa27x_device_ohci = { - .name = "pxa27x-ohci", - .id = -1, - .dev = { -@@ -316,7 +418,7 @@ - }, - }; - --static struct platform_device pxa27x_device_i2c_power = { -+struct platform_device pxa27x_device_i2c_power = { - .name = "pxa2xx-i2c", - .id = 1, - .resource = i2c_power_resources, -@@ -338,17 +440,12 @@ - &pxa27x_device_ohci, - }; - --void __init pxa27x_init_irq(void) --{ -- pxa_init_irq_low(); -- pxa_init_irq_high(); -- pxa_init_irq_gpio(128); --} -- - static int __init pxa27x_init(void) - { - int ret = 0; - if (cpu_is_pxa27x()) { -+ clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); -+ - if ((ret = pxa_init_dma(32))) - return ret; - #ifdef CONFIG_PM -Index: linux-2.6.22/arch/arm/mach-pxa/pxa300.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/pxa300.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,93 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa300.c -+ * -+ * Code specific to PXA300/PXA310 -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+ -+#include <asm/hardware.h> -+#include <asm/arch/mfp-pxa300.h> -+ -+static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { -+ -+ MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), -+ MFP_ADDR_X(GPIO3, GPIO26, 0x027c), -+ MFP_ADDR_X(GPIO27, GPIO127, 0x0400), -+ MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec), -+ -+ MFP_ADDR(nBE0, 0x0204), -+ MFP_ADDR(nBE1, 0x0208), -+ -+ MFP_ADDR(nLUA, 0x0244), -+ MFP_ADDR(nLLA, 0x0254), -+ -+ MFP_ADDR(DF_CLE_nOE, 0x0240), -+ MFP_ADDR(DF_nRE_nOE, 0x0200), -+ MFP_ADDR(DF_ALE_nWE, 0x020C), -+ MFP_ADDR(DF_INT_RnB, 0x00C8), -+ MFP_ADDR(DF_nCS0, 0x0248), -+ MFP_ADDR(DF_nCS1, 0x0278), -+ MFP_ADDR(DF_nWE, 0x00CC), -+ -+ MFP_ADDR(DF_ADDR0, 0x0210), -+ MFP_ADDR(DF_ADDR1, 0x0214), -+ MFP_ADDR(DF_ADDR2, 0x0218), -+ MFP_ADDR(DF_ADDR3, 0x021C), -+ -+ MFP_ADDR(DF_IO0, 0x0220), -+ MFP_ADDR(DF_IO1, 0x0228), -+ MFP_ADDR(DF_IO2, 0x0230), -+ MFP_ADDR(DF_IO3, 0x0238), -+ MFP_ADDR(DF_IO4, 0x0258), -+ MFP_ADDR(DF_IO5, 0x0260), -+ MFP_ADDR(DF_IO6, 0x0268), -+ MFP_ADDR(DF_IO7, 0x0270), -+ MFP_ADDR(DF_IO8, 0x0224), -+ MFP_ADDR(DF_IO9, 0x022C), -+ MFP_ADDR(DF_IO10, 0x0234), -+ MFP_ADDR(DF_IO11, 0x023C), -+ MFP_ADDR(DF_IO12, 0x025C), -+ MFP_ADDR(DF_IO13, 0x0264), -+ MFP_ADDR(DF_IO14, 0x026C), -+ MFP_ADDR(DF_IO15, 0x0274), -+ -+ MFP_ADDR_END, -+}; -+ -+/* override pxa300 MFP register addresses */ -+static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { -+ MFP_ADDR_X(GPIO30, GPIO98, 0x0418), -+ MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), -+ -+ MFP_ADDR(ULPI_STP, 0x040C), -+ MFP_ADDR(ULPI_NXT, 0x0410), -+ MFP_ADDR(ULPI_DIR, 0x0414), -+ -+ MFP_ADDR_END, -+}; -+ -+static int __init pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) { -+ pxa3xx_init_mfp(); -+ pxa3xx_mfp_init_addr(pxa300_mfp_addr_map); -+ } -+ -+ if (cpu_is_pxa310()) -+ pxa3xx_mfp_init_addr(pxa310_mfp_addr_map); -+ -+ return 0; -+} -+ -+core_initcall(pxa300_init); -Index: linux-2.6.22/arch/arm/mach-pxa/pxa320.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/pxa320.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,88 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa320.c -+ * -+ * Code specific to PXA320 -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+ -+#include <asm/hardware.h> -+#include <asm/arch/mfp.h> -+#include <asm/arch/mfp-pxa320.h> -+ -+static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { -+ -+ MFP_ADDR_X(GPIO0, GPIO4, 0x0124), -+ MFP_ADDR_X(GPIO5, GPIO26, 0x028C), -+ MFP_ADDR_X(GPIO27, GPIO62, 0x0400), -+ MFP_ADDR_X(GPIO63, GPIO73, 0x04B4), -+ MFP_ADDR_X(GPIO74, GPIO98, 0x04F0), -+ MFP_ADDR_X(GPIO99, GPIO127, 0x0600), -+ MFP_ADDR_X(GPIO0_2, GPIO5_2, 0x0674), -+ MFP_ADDR_X(GPIO6_2, GPIO13_2, 0x0494), -+ MFP_ADDR_X(GPIO14_2, GPIO17_2, 0x04E0), -+ -+ MFP_ADDR(nXCVREN, 0x0138), -+ MFP_ADDR(DF_CLE_nOE, 0x0204), -+ MFP_ADDR(DF_nADV1_ALE, 0x0208), -+ MFP_ADDR(DF_SCLK_S, 0x020C), -+ MFP_ADDR(DF_SCLK_E, 0x0210), -+ MFP_ADDR(nBE0, 0x0214), -+ MFP_ADDR(nBE1, 0x0218), -+ MFP_ADDR(DF_nADV2_ALE, 0x021C), -+ MFP_ADDR(DF_INT_RnB, 0x0220), -+ MFP_ADDR(DF_nCS0, 0x0224), -+ MFP_ADDR(DF_nCS1, 0x0228), -+ MFP_ADDR(DF_nWE, 0x022C), -+ MFP_ADDR(DF_nRE_nOE, 0x0230), -+ MFP_ADDR(nLUA, 0x0234), -+ MFP_ADDR(nLLA, 0x0238), -+ MFP_ADDR(DF_ADDR0, 0x023C), -+ MFP_ADDR(DF_ADDR1, 0x0240), -+ MFP_ADDR(DF_ADDR2, 0x0244), -+ MFP_ADDR(DF_ADDR3, 0x0248), -+ MFP_ADDR(DF_IO0, 0x024C), -+ MFP_ADDR(DF_IO8, 0x0250), -+ MFP_ADDR(DF_IO1, 0x0254), -+ MFP_ADDR(DF_IO9, 0x0258), -+ MFP_ADDR(DF_IO2, 0x025C), -+ MFP_ADDR(DF_IO10, 0x0260), -+ MFP_ADDR(DF_IO3, 0x0264), -+ MFP_ADDR(DF_IO11, 0x0268), -+ MFP_ADDR(DF_IO4, 0x026C), -+ MFP_ADDR(DF_IO12, 0x0270), -+ MFP_ADDR(DF_IO5, 0x0274), -+ MFP_ADDR(DF_IO13, 0x0278), -+ MFP_ADDR(DF_IO6, 0x027C), -+ MFP_ADDR(DF_IO14, 0x0280), -+ MFP_ADDR(DF_IO7, 0x0284), -+ MFP_ADDR(DF_IO15, 0x0288), -+ -+ MFP_ADDR_END, -+}; -+ -+static void __init pxa320_init_mfp(void) -+{ -+ pxa3xx_init_mfp(); -+ pxa3xx_mfp_init_addr(pxa320_mfp_addr_map); -+} -+ -+static int __init pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) -+ pxa320_init_mfp(); -+ -+ return 0; -+} -+ -+core_initcall(pxa320_init); -Index: linux-2.6.22/arch/arm/mach-pxa/pxa3xx.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/pxa3xx.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,216 @@ -+/* -+ * linux/arch/arm/mach-pxa/pxa3xx.c -+ * -+ * code specific to pxa3xx aka Monahans -+ * -+ * Copyright (C) 2006 Marvell International Ltd. -+ * -+ * 2007-09-02: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/pm.h> -+#include <linux/platform_device.h> -+#include <linux/irq.h> -+ -+#include <asm/hardware.h> -+#include <asm/arch/pxa3xx-regs.h> -+#include <asm/arch/ohci.h> -+#include <asm/arch/pm.h> -+#include <asm/arch/dma.h> -+#include <asm/arch/ssp.h> -+ -+#include "generic.h" -+#include "devices.h" -+#include "clock.h" -+ -+/* Crystal clock: 13MHz */ -+#define BASE_CLK 13000000 -+ -+/* Ring Oscillator Clock: 60MHz */ -+#define RO_CLK 60000000 -+ -+#define ACCR_D0CS (1 << 26) -+ -+/* crystal frequency to static memory controller multiplier (SMCFS) */ -+static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; -+ -+/* crystal frequency to HSIO bus frequency multiplier (HSS) */ -+static unsigned char hss_mult[4] = { 8, 12, 16, 0 }; -+ -+/* -+ * Get the clock frequency as reflected by CCSR and the turbo flag. -+ * We assume these values have been applied via a fcs. -+ * If info is not 0 we also display the current settings. -+ */ -+unsigned int pxa3xx_get_clk_frequency_khz(int info) -+{ -+ unsigned long acsr, xclkcfg; -+ unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS; -+ -+ /* Read XCLKCFG register turbo bit */ -+ __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); -+ t = xclkcfg & 0x1; -+ -+ acsr = ACSR; -+ -+ xl = acsr & 0x1f; -+ xn = (acsr >> 8) & 0x7; -+ hss = (acsr >> 14) & 0x3; -+ -+ XL = xl * BASE_CLK; -+ XN = xn * XL; -+ -+ ro = acsr & ACCR_D0CS; -+ -+ CLK = (ro) ? RO_CLK : ((t) ? XN : XL); -+ HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK; -+ -+ if (info) { -+ pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n", -+ RO_CLK / 1000000, (RO_CLK % 1000000) / 10000, -+ (ro) ? "" : "in"); -+ pr_info("Run Mode clock: %d.%02dMHz (*%d)\n", -+ XL / 1000000, (XL % 1000000) / 10000, xl); -+ pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n", -+ XN / 1000000, (XN % 1000000) / 10000, xn, -+ (t) ? "" : "in"); -+ pr_info("HSIO bus clock: %d.%02dMHz\n", -+ HSS / 1000000, (HSS % 1000000) / 10000); -+ } -+ -+ return CLK; -+} -+ -+/* -+ * Return the current static memory controller clock frequency -+ * in units of 10kHz -+ */ -+unsigned int pxa3xx_get_memclk_frequency_10khz(void) -+{ -+ unsigned long acsr; -+ unsigned int smcfs, clk = 0; -+ -+ acsr = ACSR; -+ -+ smcfs = (acsr >> 23) & 0x7; -+ clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK; -+ -+ return (clk / 10000); -+} -+ -+/* -+ * Return the current HSIO bus clock frequency -+ */ -+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) -+{ -+ unsigned long acsr; -+ unsigned int hss, hsio_clk; -+ -+ acsr = ACSR; -+ -+ hss = (acsr >> 14) & 0x3; -+ hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK; -+ -+ return hsio_clk; -+} -+ -+static void clk_pxa3xx_cken_enable(struct clk *clk) -+{ -+ unsigned long mask = 1ul << (clk->cken & 0x1f); -+ -+ local_irq_disable(); -+ -+ if (clk->cken < 32) -+ CKENA |= mask; -+ else -+ CKENB |= mask; -+ -+ local_irq_enable(); -+} -+ -+static void clk_pxa3xx_cken_disable(struct clk *clk) -+{ -+ unsigned long mask = 1ul << (clk->cken & 0x1f); -+ -+ local_irq_disable(); -+ -+ if (clk->cken < 32) -+ CKENA &= ~mask; -+ else -+ CKENB &= ~mask; -+ -+ local_irq_enable(); -+} -+ -+static const struct clkops clk_pxa3xx_hsio_ops = { -+ .enable = clk_pxa3xx_cken_enable, -+ .disable = clk_pxa3xx_cken_disable, -+ .getrate = clk_pxa3xx_hsio_getrate, -+}; -+ -+static struct clk pxa3xx_clks[] = { -+ INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), -+ INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), -+ -+ INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), -+ INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), -+ INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL), -+ -+ INIT_CKEN("I2CCLK", I2C, 32842000, 0, &pxa_device_i2c.dev), -+ INIT_CKEN("UDCCLK", UDC, 48000000, 5, &pxa_device_udc.dev), -+}; -+ -+void __init pxa3xx_init_irq(void) -+{ -+ /* enable CP6 access */ -+ u32 value; -+ __asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value)); -+ value |= (1 << 6); -+ __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); -+ -+ pxa_init_irq_low(); -+ pxa_init_irq_high(); -+ pxa_init_irq_gpio(128); -+} -+ -+/* -+ * device registration specific to PXA3xx. -+ */ -+ -+static struct platform_device *devices[] __initdata = { -+ &pxa_device_mci, -+ &pxa_device_udc, -+ &pxa_device_fb, -+ &pxa_device_ffuart, -+ &pxa_device_btuart, -+ &pxa_device_stuart, -+ &pxa_device_i2c, -+ &pxa_device_i2s, -+ &pxa_device_ficp, -+ &pxa_device_rtc, -+}; -+ -+static int __init pxa3xx_init(void) -+{ -+ int ret = 0; -+ -+ if (cpu_is_pxa3xx()) { -+ clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks)); -+ -+ if ((ret = pxa_init_dma(32))) -+ return ret; -+ -+ return platform_add_devices(devices, ARRAY_SIZE(devices)); -+ } -+ return 0; -+} -+ -+subsys_initcall(pxa3xx_init); -Index: linux-2.6.22/arch/arm/mach-pxa/time.c -=================================================================== ---- linux-2.6.22.orig/arch/arm/mach-pxa/time.c 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mach-pxa/time.c 2007-09-24 20:57:20.000000000 +0200 -@@ -16,10 +16,48 @@ - #include <linux/init.h> - #include <linux/interrupt.h> - #include <linux/clockchips.h> -+#include <linux/sched.h> - -+#include <asm/div64.h> -+#include <asm/cnt32_to_63.h> - #include <asm/mach/irq.h> - #include <asm/mach/time.h> - #include <asm/arch/pxa-regs.h> -+#include <asm/mach-types.h> -+ -+/* -+ * This is PXA's sched_clock implementation. This has a resolution -+ * of at least 308 ns and a maximum value of 208 days. -+ * -+ * The return value is guaranteed to be monotonic in that range as -+ * long as there is always less than 582 seconds between successive -+ * calls to sched_clock() which should always be the case in practice. -+ */ -+ -+#define OSCR2NS_SCALE_FACTOR 10 -+ -+static unsigned long oscr2ns_scale; -+ -+static void __init set_oscr2ns_scale(unsigned long oscr_rate) -+{ -+ unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR; -+ do_div(v, oscr_rate); -+ oscr2ns_scale = v; -+ /* -+ * We want an even value to automatically clear the top bit -+ * returned by cnt32_to_63() without an additional run time -+ * instruction. So if the LSB is 1 then round it up. -+ */ -+ if (oscr2ns_scale & 1) -+ oscr2ns_scale++; -+} -+ -+unsigned long long sched_clock(void) -+{ -+ unsigned long long v = cnt32_to_63(OSCR); -+ return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR; -+} -+ - - static irqreturn_t - pxa_ost0_interrupt(int irq, void *dev_id) -@@ -149,18 +187,29 @@ - - static void __init pxa_timer_init(void) - { -+ unsigned long clock_tick_rate; -+ - OIER = 0; - OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - -+ if (cpu_is_pxa21x() || cpu_is_pxa25x()) -+ clock_tick_rate = 3686400; -+ else if (machine_is_mainstone()) -+ clock_tick_rate = 3249600; -+ else -+ clock_tick_rate = 3250000; -+ -+ set_oscr2ns_scale(clock_tick_rate); -+ - ckevt_pxa_osmr0.mult = -- div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); -+ div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); - ckevt_pxa_osmr0.max_delta_ns = - clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0); - ckevt_pxa_osmr0.min_delta_ns = - clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1; - - cksrc_pxa_oscr0.mult = -- clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift); -+ clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); - - setup_irq(IRQ_OST0, &pxa_ost0_irq); - -Index: linux-2.6.22/arch/arm/mach-pxa/zylonite.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/zylonite.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,184 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite.c -+ * -+ * Support for the PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2006 Marvell International Ltd. -+ * -+ * 2007-09-04: eric miao <eric.y.miao@gmail.com> -+ * rewrite to align with latest kernel -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/interrupt.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+ -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/hardware.h> -+#include <asm/arch/gpio.h> -+#include <asm/arch/pxafb.h> -+#include <asm/arch/zylonite.h> -+ -+#include "generic.h" -+ -+int gpio_backlight; -+int gpio_eth_irq; -+ -+int lcd_id; -+int lcd_orientation; -+ -+static struct resource smc91x_resources[] = { -+ [0] = { -+ .start = ZYLONITE_ETH_PHYS + 0x300, -+ .end = ZYLONITE_ETH_PHYS + 0xfffff, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = -1, /* for run-time assignment */ -+ .end = -1, -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device smc91x_device = { -+ .name = "smc91x", -+ .id = 0, -+ .num_resources = ARRAY_SIZE(smc91x_resources), -+ .resource = smc91x_resources, -+}; -+ -+#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) -+static void zylonite_backlight_power(int on) -+{ -+ gpio_set_value(gpio_backlight, on); -+} -+ -+static struct pxafb_mode_info toshiba_ltm035a776c_mode = { -+ .pixclock = 110000, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ .hsync_len = 4, -+ .left_margin = 6, -+ .right_margin = 4, -+ .vsync_len = 2, -+ .upper_margin = 2, -+ .lower_margin = 3, -+ .sync = FB_SYNC_VERT_HIGH_ACT, -+}; -+ -+static struct pxafb_mode_info toshiba_ltm04c380k_mode = { -+ .pixclock = 50000, -+ .xres = 640, -+ .yres = 480, -+ .bpp = 16, -+ .hsync_len = 1, -+ .left_margin = 0x9f, -+ .right_margin = 1, -+ .vsync_len = 44, -+ .upper_margin = 0, -+ .lower_margin = 0, -+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, -+}; -+ -+static struct pxafb_mach_info zylonite_toshiba_lcd_info = { -+ .num_modes = 1, -+ .lccr0 = LCCR0_Act, -+ .lccr3 = LCCR3_PCP, -+ .pxafb_backlight_power = zylonite_backlight_power, -+}; -+ -+static struct pxafb_mode_info sharp_ls037_modes[] = { -+ [0] = { -+ .pixclock = 158000, -+ .xres = 240, -+ .yres = 320, -+ .bpp = 16, -+ .hsync_len = 4, -+ .left_margin = 39, -+ .right_margin = 39, -+ .vsync_len = 1, -+ .upper_margin = 2, -+ .lower_margin = 3, -+ .sync = 0, -+ }, -+ [1] = { -+ .pixclock = 39700, -+ .xres = 480, -+ .yres = 640, -+ .bpp = 16, -+ .hsync_len = 8, -+ .left_margin = 81, -+ .right_margin = 81, -+ .vsync_len = 1, -+ .upper_margin = 2, -+ .lower_margin = 7, -+ .sync = 0, -+ }, -+}; -+ -+static struct pxafb_mach_info zylonite_sharp_lcd_info = { -+ .modes = sharp_ls037_modes, -+ .num_modes = 2, -+ .lccr0 = LCCR0_Act, -+ .lccr3 = LCCR3_PCP | LCCR3_HSP | LCCR3_VSP, -+ .pxafb_backlight_power = zylonite_backlight_power, -+}; -+ -+static void __init zylonite_init_lcd(void) -+{ -+ /* backlight GPIO: output, default on */ -+ gpio_direction_output(gpio_backlight, 1); -+ -+ if (lcd_id & 0x20) { -+ set_pxa_fb_info(&zylonite_sharp_lcd_info); -+ return; -+ } -+ -+ /* legacy LCD panels, it would be handy here if LCD panel type can -+ * be decided at run-time -+ */ -+ if (1) -+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode; -+ else -+ zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode; -+ -+ set_pxa_fb_info(&zylonite_toshiba_lcd_info); -+} -+#else -+static inline void zylonite_init_lcd(void) {} -+#endif -+ -+static void __init zylonite_init(void) -+{ -+ /* board-processor specific initialization */ -+ zylonite_pxa300_init(); -+ zylonite_pxa320_init(); -+ -+ /* -+ * Note: We depend that the bootloader set -+ * the correct value to MSC register for SMC91x. -+ */ -+ smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); -+ smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); -+ platform_device_register(&smc91x_device); -+ -+ zylonite_init_lcd(); -+} -+ -+MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") -+ .phys_io = 0x40000000, -+ .boot_params = 0xa0000100, -+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, -+ .map_io = pxa_map_io, -+ .init_irq = pxa3xx_init_irq, -+ .timer = &pxa_timer, -+ .init_machine = zylonite_init, -+MACHINE_END -Index: linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa300.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa300.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,188 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite_pxa300.c -+ * -+ * PXA300/PXA310 specific support code for the -+ * PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+ -+#include <asm/gpio.h> -+#include <asm/arch/mfp-pxa300.h> -+#include <asm/arch/zylonite.h> -+ -+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -+ -+/* PXA300/PXA310 common configurations */ -+static mfp_cfg_t common_mfp_cfg[] __initdata = { -+ /* LCD */ -+ GPIO54_LCD_LDD_0, -+ GPIO55_LCD_LDD_1, -+ GPIO56_LCD_LDD_2, -+ GPIO57_LCD_LDD_3, -+ GPIO58_LCD_LDD_4, -+ GPIO59_LCD_LDD_5, -+ GPIO60_LCD_LDD_6, -+ GPIO61_LCD_LDD_7, -+ GPIO62_LCD_LDD_8, -+ GPIO63_LCD_LDD_9, -+ GPIO64_LCD_LDD_10, -+ GPIO65_LCD_LDD_11, -+ GPIO66_LCD_LDD_12, -+ GPIO67_LCD_LDD_13, -+ GPIO68_LCD_LDD_14, -+ GPIO69_LCD_LDD_15, -+ GPIO70_LCD_LDD_16, -+ GPIO71_LCD_LDD_17, -+ GPIO72_LCD_FCLK, -+ GPIO73_LCD_LCLK, -+ GPIO74_LCD_PCLK, -+ GPIO75_LCD_BIAS, -+ GPIO76_LCD_VSYNC, -+ GPIO127_LCD_CS_N, -+ -+ /* BTUART */ -+ GPIO111_UART2_RTS, -+ GPIO112_UART2_RXD, -+ GPIO113_UART2_TXD, -+ GPIO114_UART2_CTS, -+ -+ /* STUART */ -+ GPIO109_UART3_TXD, -+ GPIO110_UART3_RXD, -+ -+ /* AC97 */ -+ GPIO23_AC97_nACRESET, -+ GPIO24_AC97_SYSCLK, -+ GPIO29_AC97_BITCLK, -+ GPIO25_AC97_SDATA_IN_0, -+ GPIO27_AC97_SDATA_OUT, -+ GPIO28_AC97_SYNC, -+ -+ /* Keypad */ -+ GPIO107_KP_DKIN_0, -+ GPIO108_KP_DKIN_1, -+ GPIO115_KP_MKIN_0, -+ GPIO116_KP_MKIN_1, -+ GPIO117_KP_MKIN_2, -+ GPIO118_KP_MKIN_3, -+ GPIO119_KP_MKIN_4, -+ GPIO120_KP_MKIN_5, -+ GPIO2_2_KP_MKIN_6, -+ GPIO3_2_KP_MKIN_7, -+ GPIO121_KP_MKOUT_0, -+ GPIO122_KP_MKOUT_1, -+ GPIO123_KP_MKOUT_2, -+ GPIO124_KP_MKOUT_3, -+ GPIO125_KP_MKOUT_4, -+ GPIO4_2_KP_MKOUT_5, -+ GPIO5_2_KP_MKOUT_6, -+ GPIO6_2_KP_MKOUT_7, -+}; -+ -+static mfp_cfg_t pxa300_mfp_cfg[] __initdata = { -+ /* FFUART */ -+ GPIO30_UART1_RXD, -+ GPIO31_UART1_TXD, -+ GPIO32_UART1_CTS, -+ GPIO37_UART1_RTS, -+ GPIO33_UART1_DCD, -+ GPIO34_UART1_DSR, -+ GPIO35_UART1_RI, -+ GPIO36_UART1_DTR, -+ -+ /* Ethernet */ -+ GPIO2_nCS3, -+ GPIO99_GPIO, -+}; -+ -+static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { -+ /* FFUART */ -+ GPIO99_UART1_RXD, -+ GPIO100_UART1_TXD, -+ GPIO101_UART1_CTS, -+ GPIO106_UART1_RTS, -+ -+ /* Ethernet */ -+ GPIO2_nCS3, -+ GPIO102_GPIO, -+}; -+ -+#define NUM_LCD_DETECT_PINS 7 -+ -+static int lcd_detect_pins[] __initdata = { -+ MFP_PIN_GPIO71, /* LCD_LDD_17 - ORIENT */ -+ MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */ -+ MFP_PIN_GPIO75, /* LCD_BIAS - LCDID[4] */ -+ MFP_PIN_GPIO73, /* LCD_LCLK - LCDID[3] */ -+ MFP_PIN_GPIO72, /* LCD_FCLK - LCDID[2] */ -+ MFP_PIN_GPIO127,/* LCD_CS_N - LCDID[1] */ -+ MFP_PIN_GPIO76, /* LCD_VSYNC - LCDID[0] */ -+}; -+ -+static void __init zylonite_detect_lcd_panel(void) -+{ -+ unsigned long mfpr_save[NUM_LCD_DETECT_PINS]; -+ int i, gpio, id = 0; -+ -+ /* save the original MFP settings of these pins and configure -+ * them as GPIO Input, DS01X, Pull Neither, Edge Clear -+ */ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); -+ pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440); -+ } -+ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ id = id << 1; -+ gpio = mfp_to_gpio(lcd_detect_pins[i]); -+ gpio_direction_input(gpio); -+ -+ if (gpio_get_value(gpio)) -+ id = id | 0x1; -+ } -+ -+ /* lcd id, flush out bit 1 */ -+ lcd_id = id & 0x3d; -+ -+ /* lcd orientation, portrait or landscape */ -+ lcd_orientation = (id >> 6) & 0x1; -+ -+ /* restore the original MFP settings */ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) -+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); -+} -+ -+void __init zylonite_pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) { -+ /* initialize MFP */ -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg)); -+ -+ /* detect LCD panel */ -+ zylonite_detect_lcd_panel(); -+ -+ /* GPIO pin assignment */ -+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); -+ } -+ -+ if (cpu_is_pxa300()) { -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg)); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99); -+ } -+ -+ if (cpu_is_pxa310()) { -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg)); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102); -+ } -+} -Index: linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa320.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/arch/arm/mach-pxa/zylonite_pxa320.c 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,173 @@ -+/* -+ * linux/arch/arm/mach-pxa/zylonite_pxa320.c -+ * -+ * PXA320 specific support code for the -+ * PXA3xx Development Platform (aka Zylonite) -+ * -+ * Copyright (C) 2007 Marvell Internation Ltd. -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+ -+#include <asm/arch/gpio.h> -+#include <asm/arch/mfp-pxa320.h> -+#include <asm/arch/zylonite.h> -+ -+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) -+ -+static mfp_cfg_t mfp_cfg[] __initdata = { -+ /* LCD */ -+ GPIO6_2_LCD_LDD_0, -+ GPIO7_2_LCD_LDD_1, -+ GPIO8_2_LCD_LDD_2, -+ GPIO9_2_LCD_LDD_3, -+ GPIO10_2_LCD_LDD_4, -+ GPIO11_2_LCD_LDD_5, -+ GPIO12_2_LCD_LDD_6, -+ GPIO13_2_LCD_LDD_7, -+ GPIO63_LCD_LDD_8, -+ GPIO64_LCD_LDD_9, -+ GPIO65_LCD_LDD_10, -+ GPIO66_LCD_LDD_11, -+ GPIO67_LCD_LDD_12, -+ GPIO68_LCD_LDD_13, -+ GPIO69_LCD_LDD_14, -+ GPIO70_LCD_LDD_15, -+ GPIO71_LCD_LDD_16, -+ GPIO72_LCD_LDD_17, -+ GPIO73_LCD_CS_N, -+ GPIO74_LCD_VSYNC, -+ GPIO14_2_LCD_FCLK, -+ GPIO15_2_LCD_LCLK, -+ GPIO16_2_LCD_PCLK, -+ GPIO17_2_LCD_BIAS, -+ -+ /* FFUART */ -+ GPIO41_UART1_RXD, -+ GPIO42_UART1_TXD, -+ GPIO43_UART1_CTS, -+ GPIO44_UART1_DCD, -+ GPIO45_UART1_DSR, -+ GPIO46_UART1_RI, -+ GPIO47_UART1_DTR, -+ GPIO48_UART1_RTS, -+ -+ /* AC97 */ -+ GPIO34_AC97_SYSCLK, -+ GPIO35_AC97_SDATA_IN_0, -+ GPIO37_AC97_SDATA_OUT, -+ GPIO38_AC97_SYNC, -+ GPIO39_AC97_BITCLK, -+ GPIO40_AC97_nACRESET, -+ -+ /* I2C */ -+ GPIO32_I2C_SCL, -+ GPIO33_I2C_SDA, -+ -+ /* Keypad */ -+ GPIO105_KP_DKIN_0, -+ GPIO106_KP_DKIN_1, -+ GPIO113_KP_MKIN_0, -+ GPIO114_KP_MKIN_1, -+ GPIO115_KP_MKIN_2, -+ GPIO116_KP_MKIN_3, -+ GPIO117_KP_MKIN_4, -+ GPIO118_KP_MKIN_5, -+ GPIO119_KP_MKIN_6, -+ GPIO120_KP_MKIN_7, -+ GPIO121_KP_MKOUT_0, -+ GPIO122_KP_MKOUT_1, -+ GPIO123_KP_MKOUT_2, -+ GPIO124_KP_MKOUT_3, -+ GPIO125_KP_MKOUT_4, -+ GPIO126_KP_MKOUT_5, -+ GPIO127_KP_MKOUT_6, -+ GPIO5_2_KP_MKOUT_7, -+ -+ /* Ethernet */ -+ GPIO4_nCS3, -+ GPIO90_GPIO, -+}; -+ -+#define NUM_LCD_DETECT_PINS 7 -+ -+static int lcd_detect_pins[] __initdata = { -+ MFP_PIN_GPIO72, /* LCD_LDD_17 - ORIENT */ -+ MFP_PIN_GPIO71, /* LCD_LDD_16 - LCDID[5] */ -+ MFP_PIN_GPIO17_2, /* LCD_BIAS - LCDID[4] */ -+ MFP_PIN_GPIO15_2, /* LCD_LCLK - LCDID[3] */ -+ MFP_PIN_GPIO14_2, /* LCD_FCLK - LCDID[2] */ -+ MFP_PIN_GPIO73, /* LCD_CS_N - LCDID[1] */ -+ MFP_PIN_GPIO74, /* LCD_VSYNC - LCDID[0] */ -+ /* -+ * set the MFP_PIN_GPIO 14/15/17 to alternate function other than -+ * GPIO to avoid input level confliction with 14_2, 15_2, 17_2 -+ */ -+ MFP_PIN_GPIO14, -+ MFP_PIN_GPIO15, -+ MFP_PIN_GPIO17, -+}; -+ -+static int lcd_detect_mfpr[] __initdata = { -+ /* AF0, DS 1X, Pull Neither, Edge Clear */ -+ 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, -+ 0xc442, /* Backlight, Pull-Up, AF2 */ -+ 0x8445, /* AF5 */ -+ 0x8445, /* AF5 */ -+}; -+ -+static void __init zylonite_detect_lcd_panel(void) -+{ -+ unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)]; -+ int i, gpio, id = 0; -+ -+ /* save the original MFP settings of these pins and configure them -+ * as GPIO Input, DS01X, Pull Neither, Edge Clear -+ */ -+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) { -+ mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]); -+ pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]); -+ } -+ -+ for (i = 0; i < NUM_LCD_DETECT_PINS; i++) { -+ id = id << 1; -+ gpio = mfp_to_gpio(lcd_detect_pins[i]); -+ gpio_direction_input(gpio); -+ -+ if (gpio_get_value(gpio)) -+ id = id | 0x1; -+ } -+ -+ /* lcd id, flush out bit 1 */ -+ lcd_id = id & 0x3d; -+ -+ /* lcd orientation, portrait or landscape */ -+ lcd_orientation = (id >> 6) & 0x1; -+ -+ /* restore the original MFP settings */ -+ for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) -+ pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); -+} -+ -+void __init zylonite_pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) { -+ /* initialize MFP */ -+ pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg)); -+ -+ /* detect LCD panel */ -+ zylonite_detect_lcd_panel(); -+ -+ /* GPIO pin assignment */ -+ gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO14); -+ gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO9); -+ } -+} -Index: linux-2.6.22/arch/arm/mm/Kconfig -=================================================================== ---- linux-2.6.22.orig/arch/arm/mm/Kconfig 2007-09-24 20:56:51.000000000 +0200 -+++ linux-2.6.22/arch/arm/mm/Kconfig 2007-09-24 20:57:20.000000000 +0200 -@@ -322,7 +322,7 @@ - # XScale - config CPU_XSCALE - bool -- depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_PXA || ARCH_IXP4XX || ARCH_IXP2000 -+ depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000 - default y - select CPU_32v5 - select CPU_ABRT_EV5T -@@ -333,7 +333,7 @@ - # XScale Core Version 3 - config CPU_XSC3 - bool -- depends on ARCH_IXP23XX || ARCH_IOP13XX -+ depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx - default y - select CPU_32v5 - select CPU_ABRT_EV5T -Index: linux-2.6.22/drivers/i2c/busses/i2c-pxa.c -=================================================================== ---- linux-2.6.22.orig/drivers/i2c/busses/i2c-pxa.c 2007-09-24 20:56:56.000000000 +0200 -+++ linux-2.6.22/drivers/i2c/busses/i2c-pxa.c 2007-09-24 20:57:20.000000000 +0200 -@@ -31,6 +31,8 @@ - #include <linux/interrupt.h> - #include <linux/i2c-pxa.h> - #include <linux/platform_device.h> -+#include <linux/err.h> -+#include <linux/clk.h> - - #include <asm/hardware.h> - #include <asm/irq.h> -@@ -48,6 +50,7 @@ - unsigned int slave_addr; - - struct i2c_adapter adap; -+ struct clk *clk; - #ifdef CONFIG_I2C_PXA_SLAVE - struct i2c_slave_client *slave; - #endif -@@ -869,6 +872,12 @@ - - sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id); - -+ i2c->clk = clk_get(&dev->dev, "I2CCLK"); -+ if (IS_ERR(i2c->clk)) { -+ ret = PTR_ERR(i2c->clk); -+ goto eclk; -+ } -+ - i2c->reg_base = ioremap(res->start, res_len(res)); - if (!i2c->reg_base) { - ret = -EIO; -@@ -889,22 +898,19 @@ - } - #endif - -+ clk_enable(i2c->clk); -+#ifdef CONFIG_PXA27x - switch (dev->id) { - case 0: --#ifdef CONFIG_PXA27x - pxa_gpio_mode(GPIO117_I2CSCL_MD); - pxa_gpio_mode(GPIO118_I2CSDA_MD); --#endif -- pxa_set_cken(CKEN_I2C, 1); - break; --#ifdef CONFIG_PXA27x - case 1: - local_irq_disable(); - PCFR |= PCFR_PI2CEN; - local_irq_enable(); -- pxa_set_cken(CKEN_PWRI2C, 1); --#endif - } -+#endif - - ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, - i2c->adap.name, i2c); -@@ -948,19 +954,18 @@ - eadapt: - free_irq(irq, i2c); - ereqirq: -- switch (dev->id) { -- case 0: -- pxa_set_cken(CKEN_I2C, 0); -- break; -+ clk_disable(i2c->clk); -+ - #ifdef CONFIG_PXA27x -- case 1: -- pxa_set_cken(CKEN_PWRI2C, 0); -+ if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); --#endif - } -+#endif - eremap: -+ clk_put(i2c->clk); -+eclk: - kfree(i2c); - emalloc: - release_mem_region(res->start, res_len(res)); -@@ -975,18 +980,18 @@ - - i2c_del_adapter(&i2c->adap); - free_irq(i2c->irq, i2c); -- switch (dev->id) { -- case 0: -- pxa_set_cken(CKEN_I2C, 0); -- break; -+ -+ clk_disable(i2c->clk); -+ clk_put(i2c->clk); -+ - #ifdef CONFIG_PXA27x -- case 1: -- pxa_set_cken(CKEN_PWRI2C, 0); -+ if (dev->id == 1) { - local_irq_disable(); - PCFR &= ~PCFR_PI2CEN; - local_irq_enable(); --#endif - } -+#endif -+ - release_mem_region(i2c->iobase, i2c->iosize); - kfree(i2c); - -Index: linux-2.6.22/drivers/input/keyboard/pxa27x_keyboard.c -=================================================================== ---- linux-2.6.22.orig/drivers/input/keyboard/pxa27x_keyboard.c 2007-09-24 20:56:56.000000000 +0200 -+++ linux-2.6.22/drivers/input/keyboard/pxa27x_keyboard.c 2007-09-24 20:57:20.000000000 +0200 -@@ -23,6 +23,8 @@ - #include <linux/input.h> - #include <linux/device.h> - #include <linux/platform_device.h> -+#include <linux/clk.h> -+#include <linux/err.h> - - #include <asm/mach-types.h> - #include <asm/mach/arch.h> -@@ -40,6 +42,8 @@ - col/2 == 2 ? KPASMKP2 : KPASMKP3) - #define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2))) - -+static struct clk *pxakbd_clk; -+ - static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id) - { - struct platform_device *pdev = dev_id; -@@ -104,7 +108,7 @@ - KPREC = 0x7F; - - /* Enable unit clock */ -- pxa_set_cken(CKEN_KEYPAD, 1); -+ clk_enable(pxakbd_clk); - - return 0; - } -@@ -112,7 +116,7 @@ - static void pxakbd_close(struct input_dev *dev) - { - /* Disable clock unit */ -- pxa_set_cken(CKEN_KEYPAD, 0); -+ clk_disable(pxakbd_clk); - } - - #ifdef CONFIG_PM -@@ -140,7 +144,8 @@ - KPREC = pdata->reg_kprec; - - /* Enable unit clock */ -- pxa_set_cken(CKEN_KEYPAD, 1); -+ clk_disable(pxakbd_clk); -+ clk_enable(pxakbd_clk); - } - - mutex_unlock(&input_dev->mutex); -@@ -158,11 +163,18 @@ - struct input_dev *input_dev; - int i, row, col, error; - -+ pxakbd_clk = clk_get(&pdev->dev, "KBDCLK"); -+ if (IS_ERR(pxakbd_clk)) { -+ error = PTR_ERR(pxakbd_clk); -+ goto err_clk; -+ } -+ - /* Create and register the input driver. */ - input_dev = input_allocate_device(); - if (!input_dev) { - printk(KERN_ERR "Cannot request keypad device\n"); -- return -ENOMEM; -+ error = -ENOMEM; -+ goto err_alloc; - } - - input_dev->name = DRIVER_NAME; -@@ -185,7 +197,6 @@ - DRIVER_NAME, pdev); - if (error) { - printk(KERN_ERR "Cannot request keypad IRQ\n"); -- pxa_set_cken(CKEN_KEYPAD, 0); - goto err_free_dev; - } - -@@ -217,6 +228,9 @@ - free_irq(IRQ_KEYPAD, pdev); - err_free_dev: - input_free_device(input_dev); -+ err_alloc: -+ clk_put(pxakbd_clk); -+ err_clk: - return error; - } - -@@ -226,6 +240,7 @@ - - input_unregister_device(input_dev); - free_irq(IRQ_KEYPAD, pdev); -+ clk_put(pxakbd_clk); - platform_set_drvdata(pdev, NULL); - - return 0; -Index: linux-2.6.22/drivers/mmc/host/pxamci.c -=================================================================== ---- linux-2.6.22.orig/drivers/mmc/host/pxamci.c 2007-09-24 20:56:58.000000000 +0200 -+++ linux-2.6.22/drivers/mmc/host/pxamci.c 2007-09-24 20:57:20.000000000 +0200 -@@ -23,6 +23,8 @@ - #include <linux/delay.h> - #include <linux/interrupt.h> - #include <linux/dma-mapping.h> -+#include <linux/clk.h> -+#include <linux/err.h> - #include <linux/mmc/host.h> - - #include <asm/dma.h> -@@ -44,6 +46,8 @@ - spinlock_t lock; - struct resource *res; - void __iomem *base; -+ struct clk *clk; -+ unsigned long clkrate; - int irq; - int dma; - unsigned int clkrt; -@@ -119,7 +123,7 @@ - writel(nob, host->base + MMC_NOB); - writel(data->blksz, host->base + MMC_BLKLEN); - -- clks = (unsigned long long)data->timeout_ns * CLOCKRATE; -+ clks = (unsigned long long)data->timeout_ns * host->clkrate; - do_div(clks, 1000000000UL); - timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt); - writel((timeout + 255) / 256, host->base + MMC_RDTO); -@@ -358,18 +362,25 @@ - struct pxamci_host *host = mmc_priv(mmc); - - if (ios->clock) { -- unsigned int clk = CLOCKRATE / ios->clock; -- if (CLOCKRATE / clk > ios->clock) -+ unsigned long rate = host->clkrate; -+ unsigned int clk = rate / ios->clock; -+ -+ /* -+ * clk might result in a lower divisor than we -+ * desire. check for that condition and adjust -+ * as appropriate. -+ */ -+ if (rate / clk > ios->clock) - clk <<= 1; - host->clkrt = fls(clk) - 1; -- pxa_set_cken(CKEN_MMC, 1); -+ clk_enable(host->clk); - - /* - * we write clkrt on the next command - */ - } else { - pxamci_stop_clock(host); -- pxa_set_cken(CKEN_MMC, 0); -+ clk_disable(host->clk); - } - - if (host->power_mode != ios->power_mode) { -@@ -429,8 +440,6 @@ - } - - mmc->ops = &pxamci_ops; -- mmc->f_min = CLOCKRATE_MIN; -- mmc->f_max = CLOCKRATE_MAX; - - /* - * We can do SG-DMA, but we don't because we never know how much -@@ -457,6 +466,22 @@ - host->mmc = mmc; - host->dma = -1; - host->pdata = pdev->dev.platform_data; -+ -+ host->clk = clk_get(&pdev->dev, "MMCCLK"); -+ if (IS_ERR(host->clk)) { -+ ret = PTR_ERR(host->clk); -+ host->clk = NULL; -+ goto out; -+ } -+ -+ host->clkrate = clk_get_rate(host->clk); -+ -+ /* -+ * Calculate minimum clock rate, rounding up. -+ */ -+ mmc->f_min = (host->clkrate + 63) / 64; -+ mmc->f_max = host->clkrate; -+ - mmc->ocr_avail = host->pdata ? - host->pdata->ocr_mask : - MMC_VDD_32_33|MMC_VDD_33_34; -@@ -515,6 +540,8 @@ - iounmap(host->base); - if (host->sg_cpu) - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); -+ if (host->clk) -+ clk_put(host->clk); - } - if (mmc) - mmc_free_host(mmc); -@@ -549,6 +576,8 @@ - iounmap(host->base); - dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); - -+ clk_put(host->clk); -+ - release_resource(host->res); - - mmc_free_host(mmc); -Index: linux-2.6.22/drivers/mmc/host/pxamci.h -=================================================================== ---- linux-2.6.22.orig/drivers/mmc/host/pxamci.h 2007-09-24 20:56:58.000000000 +0200 -+++ linux-2.6.22/drivers/mmc/host/pxamci.h 2007-09-24 20:57:20.000000000 +0200 -@@ -86,17 +86,3 @@ - #define MMC_RXFIFO 0x0040 /* 8 bit */ - - #define MMC_TXFIFO 0x0044 /* 8 bit */ -- --/* -- * The base MMC clock rate -- */ --#ifdef CONFIG_PXA27x --#define CLOCKRATE_MIN 304688 --#define CLOCKRATE_MAX 19500000 --#else --#define CLOCKRATE_MIN 312500 --#define CLOCKRATE_MAX 20000000 --#endif -- --#define CLOCKRATE CLOCKRATE_MAX -- -Index: linux-2.6.22/drivers/mtd/maps/lubbock-flash.c -=================================================================== ---- linux-2.6.22.orig/drivers/mtd/maps/lubbock-flash.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/mtd/maps/lubbock-flash.c 2007-09-24 20:57:20.000000000 +0200 -@@ -24,10 +24,10 @@ - - #include <asm/io.h> - #include <asm/hardware.h> -+#include <asm/mach-types.h> - #include <asm/arch/pxa-regs.h> - #include <asm/arch/lubbock.h> - -- - #define ROM_ADDR 0x00000000 - #define FLASH_ADDR 0x04000000 - -@@ -73,9 +73,14 @@ - - static int __init init_lubbock(void) - { -- int flashboot = (LUB_CONF_SWITCHES & 1); -+ int flashboot; - int ret = 0, i; - -+ if (!machine_is_lubbock()) -+ return -ENODEV; -+ -+ flashboot = (LUB_CONF_SWITCHES & 1); -+ - lubbock_maps[0].bankwidth = lubbock_maps[1].bankwidth = - (BOOT_DEF & 1) ? 2 : 4; - -Index: linux-2.6.22/drivers/mtd/maps/mainstone-flash.c -=================================================================== ---- linux-2.6.22.orig/drivers/mtd/maps/mainstone-flash.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/mtd/maps/mainstone-flash.c 2007-09-24 20:57:20.000000000 +0200 -@@ -24,10 +24,10 @@ - - #include <asm/io.h> - #include <asm/hardware.h> -+#include <asm/mach-types.h> - #include <asm/arch/pxa-regs.h> - #include <asm/arch/mainstone.h> - -- - #define ROM_ADDR 0x00000000 - #define FLASH_ADDR 0x04000000 - -@@ -77,6 +77,9 @@ - int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ - int ret = 0, i; - -+ if (!machine_is_mainstone()) -+ return -ENODEV; -+ - mainstone_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4; - mainstone_maps[1].bankwidth = 4; - -Index: linux-2.6.22/drivers/net/irda/pxaficp_ir.c -=================================================================== ---- linux-2.6.22.orig/drivers/net/irda/pxaficp_ir.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/net/irda/pxaficp_ir.c 2007-09-24 20:57:20.000000000 +0200 -@@ -23,6 +23,7 @@ - #include <linux/dma-mapping.h> - #include <linux/platform_device.h> - #include <linux/pm.h> -+#include <linux/clk.h> - - #include <net/irda/irda.h> - #include <net/irda/irmod.h> -@@ -87,8 +88,30 @@ - - struct device *dev; - struct pxaficp_platform_data *pdata; -+ struct clk *fir_clk; -+ struct clk *sir_clk; -+ struct clk *cur_clk; - }; - -+static inline void pxa_irda_disable_clk(struct pxa_irda *si) -+{ -+ if (si->cur_clk) -+ clk_disable(si->cur_clk); -+ si->cur_clk = NULL; -+} -+ -+static inline void pxa_irda_enable_firclk(struct pxa_irda *si) -+{ -+ si->cur_clk = si->fir_clk; -+ clk_enable(si->fir_clk); -+} -+ -+static inline void pxa_irda_enable_sirclk(struct pxa_irda *si) -+{ -+ si->cur_clk = si->sir_clk; -+ clk_enable(si->sir_clk); -+} -+ - - #define IS_FIR(si) ((si)->speed >= 4000000) - #define IRDA_FRAME_SIZE_LIMIT 2047 -@@ -134,7 +157,7 @@ - DCSR(si->rxdma) &= ~DCSR_RUN; - /* disable FICP */ - ICCR0 = 0; -- pxa_set_cken(CKEN_FICP, 0); -+ pxa_irda_disable_clk(si); - - /* set board transceiver to SIR mode */ - si->pdata->transceiver_mode(si->dev, IR_SIRMODE); -@@ -144,7 +167,7 @@ - pxa_gpio_mode(GPIO47_STTXD_MD); - - /* enable the STUART clock */ -- pxa_set_cken(CKEN_STUART, 1); -+ pxa_irda_enable_sirclk(si); - } - - /* disable STUART first */ -@@ -169,7 +192,7 @@ - /* disable STUART */ - STIER = 0; - STISR = 0; -- pxa_set_cken(CKEN_STUART, 0); -+ pxa_irda_disable_clk(si); - - /* disable FICP first */ - ICCR0 = 0; -@@ -182,7 +205,7 @@ - pxa_gpio_mode(GPIO47_ICPTXD_MD); - - /* enable the FICP clock */ -- pxa_set_cken(CKEN_FICP, 1); -+ pxa_irda_enable_firclk(si); - - si->speed = speed; - pxa_irda_fir_dma_rx_start(si); -@@ -592,16 +615,15 @@ - STIER = 0; - /* disable STUART SIR mode */ - STISR = 0; -- /* disable the STUART clock */ -- pxa_set_cken(CKEN_STUART, 0); - - /* disable DMA */ - DCSR(si->txdma) &= ~DCSR_RUN; - DCSR(si->rxdma) &= ~DCSR_RUN; - /* disable FICP */ - ICCR0 = 0; -- /* disable the FICP clock */ -- pxa_set_cken(CKEN_FICP, 0); -+ -+ /* disable the STUART or FICP clocks */ -+ pxa_irda_disable_clk(si); - - DRCMR17 = 0; - DRCMR18 = 0; -@@ -792,6 +814,13 @@ - si->dev = &pdev->dev; - si->pdata = pdev->dev.platform_data; - -+ si->sir_clk = clk_get(&pdev->dev, "UARTCLK"); -+ si->fir_clk = clk_get(&pdev->dev, "FICPCLK"); -+ if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) { -+ err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk); -+ goto err_mem_4; -+ } -+ - /* - * Initialise the SIR buffers - */ -@@ -831,6 +860,10 @@ - err_mem_5: - kfree(si->rx_buff.head); - err_mem_4: -+ if (si->sir_clk && !IS_ERR(si->sir_clk)) -+ clk_put(si->sir_clk); -+ if (si->fir_clk && !IS_ERR(si->fir_clk)) -+ clk_put(si->fir_clk); - free_netdev(dev); - err_mem_3: - release_mem_region(__PREG(FICP), 0x1c); -@@ -850,6 +883,8 @@ - unregister_netdev(dev); - kfree(si->tx_buff.head); - kfree(si->rx_buff.head); -+ clk_put(si->fir_clk); -+ clk_put(si->sir_clk); - free_netdev(dev); - } - -Index: linux-2.6.22/drivers/net/smc91x.c -=================================================================== ---- linux-2.6.22.orig/drivers/net/smc91x.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/net/smc91x.c 2007-09-24 20:57:20.000000000 +0200 -@@ -173,56 +173,6 @@ - */ - #define MII_DELAY 1 - --/* store this information for the driver.. */ --struct smc_local { -- /* -- * If I have to wait until memory is available to send a -- * packet, I will store the skbuff here, until I get the -- * desired memory. Then, I'll send it out and free it. -- */ -- struct sk_buff *pending_tx_skb; -- struct tasklet_struct tx_task; -- -- /* -- * these are things that the kernel wants me to keep, so users -- * can find out semi-useless statistics of how well the card is -- * performing -- */ -- struct net_device_stats stats; -- -- /* version/revision of the SMC91x chip */ -- int version; -- -- /* Contains the current active transmission mode */ -- int tcr_cur_mode; -- -- /* Contains the current active receive mode */ -- int rcr_cur_mode; -- -- /* Contains the current active receive/phy mode */ -- int rpc_cur_mode; -- int ctl_rfduplx; -- int ctl_rspeed; -- -- u32 msg_enable; -- u32 phy_type; -- struct mii_if_info mii; -- -- /* work queue */ -- struct work_struct phy_configure; -- struct net_device *dev; -- int work_pending; -- -- spinlock_t lock; -- --#ifdef SMC_USE_PXA_DMA -- /* DMA needs the physical address of the chip */ -- u_long physaddr; --#endif -- void __iomem *base; -- void __iomem *datacs; --}; -- - #if SMC_DEBUG > 0 - #define DBG(n, args...) \ - do { \ -@@ -2238,17 +2188,19 @@ - goto out_release_attrib; - } - -- platform_set_drvdata(pdev, ndev); -- ret = smc_probe(ndev, addr); -- if (ret != 0) -- goto out_iounmap; - #ifdef SMC_USE_PXA_DMA -- else { -+ { - struct smc_local *lp = netdev_priv(ndev); -+ lp->device = &pdev->dev; - lp->physaddr = res->start; - } - #endif - -+ platform_set_drvdata(pdev, ndev); -+ ret = smc_probe(ndev, addr); -+ if (ret != 0) -+ goto out_iounmap; -+ - smc_request_datacs(pdev, ndev); - - return 0; -Index: linux-2.6.22/drivers/net/smc91x.h -=================================================================== ---- linux-2.6.22.orig/drivers/net/smc91x.h 2007-09-24 20:57:01.000000000 +0200 -+++ linux-2.6.22/drivers/net/smc91x.h 2007-09-24 20:57:20.000000000 +0200 -@@ -461,6 +461,59 @@ - - #endif - -+ -+/* store this information for the driver.. */ -+struct smc_local { -+ /* -+ * If I have to wait until memory is available to send a -+ * packet, I will store the skbuff here, until I get the -+ * desired memory. Then, I'll send it out and free it. -+ */ -+ struct sk_buff *pending_tx_skb; -+ struct tasklet_struct tx_task; -+ -+ /* -+ * these are things that the kernel wants me to keep, so users -+ * can find out semi-useless statistics of how well the card is -+ * performing -+ */ -+ struct net_device_stats stats; -+ -+ /* version/revision of the SMC91x chip */ -+ int version; -+ -+ /* Contains the current active transmission mode */ -+ int tcr_cur_mode; -+ -+ /* Contains the current active receive mode */ -+ int rcr_cur_mode; -+ -+ /* Contains the current active receive/phy mode */ -+ int rpc_cur_mode; -+ int ctl_rfduplx; -+ int ctl_rspeed; -+ -+ u32 msg_enable; -+ u32 phy_type; -+ struct mii_if_info mii; -+ -+ /* work queue */ -+ struct work_struct phy_configure; -+ struct net_device *dev; -+ int work_pending; -+ -+ spinlock_t lock; -+ -+#ifdef SMC_USE_PXA_DMA -+ /* DMA needs the physical address of the chip */ -+ u_long physaddr; -+ struct device *device; -+#endif -+ void __iomem *base; -+ void __iomem *datacs; -+}; -+ -+ - #ifdef SMC_USE_PXA_DMA - /* - * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is -@@ -475,11 +528,12 @@ - #ifdef SMC_insl - #undef SMC_insl - #define SMC_insl(a, r, p, l) \ -- smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) -+ smc_pxa_dma_insl(a, lp, r, dev->dma, p, l) - static inline void --smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, -+smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, - u_char *buf, int len) - { -+ u_long physaddr = lp->physaddr; - dma_addr_t dmabuf; - - /* fallback if no DMA available */ -@@ -496,7 +550,7 @@ - } - - len *= 4; -- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); -+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); - DCSR(dma) = DCSR_NODESC; - DTADR(dma) = dmabuf; - DSADR(dma) = physaddr + reg; -@@ -506,18 +560,19 @@ - while (!(DCSR(dma) & DCSR_STOPSTATE)) - cpu_relax(); - DCSR(dma) = 0; -- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); -+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); - } - #endif - - #ifdef SMC_insw - #undef SMC_insw - #define SMC_insw(a, r, p, l) \ -- smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) -+ smc_pxa_dma_insw(a, lp, r, dev->dma, p, l) - static inline void --smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, -+smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, - u_char *buf, int len) - { -+ u_long physaddr = lp->physaddr; - dma_addr_t dmabuf; - - /* fallback if no DMA available */ -@@ -534,7 +589,7 @@ - } - - len *= 2; -- dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); -+ dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE); - DCSR(dma) = DCSR_NODESC; - DTADR(dma) = dmabuf; - DSADR(dma) = physaddr + reg; -@@ -544,7 +599,7 @@ - while (!(DCSR(dma) & DCSR_STOPSTATE)) - cpu_relax(); - DCSR(dma) = 0; -- dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); -+ dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE); - } - #endif - -Index: linux-2.6.22/drivers/serial/pxa.c -=================================================================== ---- linux-2.6.22.orig/drivers/serial/pxa.c 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/drivers/serial/pxa.c 2007-09-24 20:57:20.000000000 +0200 -@@ -42,6 +42,7 @@ - #include <linux/tty.h> - #include <linux/tty_flip.h> - #include <linux/serial_core.h> -+#include <linux/clk.h> - - #include <asm/io.h> - #include <asm/hardware.h> -@@ -56,7 +57,7 @@ - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; -- unsigned int cken; -+ struct clk *clk; - char *name; - }; - -@@ -363,6 +364,8 @@ - else - up->mcr = 0; - -+ up->port.uartclk = clk_get_rate(up->clk); -+ - /* - * Allocate the IRQ - */ -@@ -568,9 +571,11 @@ - unsigned int oldstate) - { - struct uart_pxa_port *up = (struct uart_pxa_port *)port; -- pxa_set_cken(up->cken, !state); -+ - if (!state) -- udelay(1); -+ clk_enable(up->clk); -+ else -+ clk_disable(up->clk); - } - - static void serial_pxa_release_port(struct uart_port *port) -@@ -604,7 +609,7 @@ - - #ifdef CONFIG_SERIAL_PXA_CONSOLE - --static struct uart_pxa_port serial_pxa_ports[]; -+static struct uart_pxa_port *serial_pxa_ports[4]; - static struct uart_driver serial_pxa_reg; - - #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -@@ -654,9 +659,11 @@ - static void - serial_pxa_console_write(struct console *co, const char *s, unsigned int count) - { -- struct uart_pxa_port *up = &serial_pxa_ports[co->index]; -+ struct uart_pxa_port *up = serial_pxa_ports[co->index]; - unsigned int ier; - -+ clk_enable(up->clk); -+ - /* - * First save the IER then disable the interrupts - */ -@@ -671,6 +678,8 @@ - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); -+ -+ clk_disable(up->clk); - } - - static int __init -@@ -684,7 +693,9 @@ - - if (co->index == -1 || co->index >= serial_pxa_reg.nr) - co->index = 0; -- up = &serial_pxa_ports[co->index]; -+ up = serial_pxa_ports[co->index]; -+ if (!up) -+ return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); -@@ -702,15 +713,6 @@ - .data = &serial_pxa_reg, - }; - --static int __init --serial_pxa_console_init(void) --{ -- register_console(&serial_pxa_console); -- return 0; --} -- --console_initcall(serial_pxa_console_init); -- - #define PXA_CONSOLE &serial_pxa_console - #else - #define PXA_CONSOLE NULL -@@ -736,73 +738,13 @@ - .verify_port = serial_pxa_verify_port, - }; - --static struct uart_pxa_port serial_pxa_ports[] = { -- { /* FFUART */ -- .name = "FFUART", -- .cken = CKEN_FFUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&FFUART, -- .mapbase = __PREG(FFUART), -- .irq = IRQ_FFUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 0, -- }, -- }, { /* BTUART */ -- .name = "BTUART", -- .cken = CKEN_BTUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&BTUART, -- .mapbase = __PREG(BTUART), -- .irq = IRQ_BTUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 1, -- }, -- }, { /* STUART */ -- .name = "STUART", -- .cken = CKEN_STUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&STUART, -- .mapbase = __PREG(STUART), -- .irq = IRQ_STUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 2, -- }, -- }, { /* HWUART */ -- .name = "HWUART", -- .cken = CKEN_HWUART, -- .port = { -- .type = PORT_PXA, -- .iotype = UPIO_MEM, -- .membase = (void *)&HWUART, -- .mapbase = __PREG(HWUART), -- .irq = IRQ_HWUART, -- .uartclk = 921600 * 16, -- .fifosize = 64, -- .ops = &serial_pxa_pops, -- .line = 3, -- }, -- } --}; -- - static struct uart_driver serial_pxa_reg = { - .owner = THIS_MODULE, - .driver_name = "PXA serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, -- .nr = ARRAY_SIZE(serial_pxa_ports), -+ .nr = 4, - .cons = PXA_CONSOLE, - }; - -@@ -828,10 +770,68 @@ - - static int serial_pxa_probe(struct platform_device *dev) - { -- serial_pxa_ports[dev->id].port.dev = &dev->dev; -- uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port); -- platform_set_drvdata(dev, &serial_pxa_ports[dev->id]); -+ struct uart_pxa_port *sport; -+ struct resource *mmres, *irqres; -+ int ret; -+ -+ mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); -+ if (!mmres || !irqres) -+ return -ENODEV; -+ -+ sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); -+ if (!sport) -+ return -ENOMEM; -+ -+ sport->clk = clk_get(&dev->dev, "UARTCLK"); -+ if (IS_ERR(sport->clk)) { -+ ret = PTR_ERR(sport->clk); -+ goto err_free; -+ } -+ -+ sport->port.type = PORT_PXA; -+ sport->port.iotype = UPIO_MEM; -+ sport->port.mapbase = mmres->start; -+ sport->port.irq = irqres->start; -+ sport->port.fifosize = 64; -+ sport->port.ops = &serial_pxa_pops; -+ sport->port.line = dev->id; -+ sport->port.dev = &dev->dev; -+ sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; -+ sport->port.uartclk = clk_get_rate(sport->clk); -+ -+ /* -+ * Is it worth keeping this? -+ */ -+ if (mmres->start == __PREG(FFUART)) -+ sport->name = "FFUART"; -+ else if (mmres->start == __PREG(BTUART)) -+ sport->name = "BTUART"; -+ else if (mmres->start == __PREG(STUART)) -+ sport->name = "STUART"; -+ else if (mmres->start == __PREG(HWUART)) -+ sport->name = "HWUART"; -+ else -+ sport->name = "???"; -+ -+ sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); -+ if (!sport->port.membase) { -+ ret = -ENOMEM; -+ goto err_clk; -+ } -+ -+ serial_pxa_ports[dev->id] = sport; -+ -+ uart_add_one_port(&serial_pxa_reg, &sport->port); -+ platform_set_drvdata(dev, sport); -+ - return 0; -+ -+ err_clk: -+ clk_put(sport->clk); -+ err_free: -+ kfree(sport); -+ return ret; - } - - static int serial_pxa_remove(struct platform_device *dev) -@@ -840,8 +840,9 @@ - - platform_set_drvdata(dev, NULL); - -- if (sport) -- uart_remove_one_port(&serial_pxa_reg, &sport->port); -+ uart_remove_one_port(&serial_pxa_reg, &sport->port); -+ clk_put(sport->clk); -+ kfree(sport); - - return 0; - } -Index: linux-2.6.22/drivers/serial/serial_core.c -=================================================================== ---- linux-2.6.22.orig/drivers/serial/serial_core.c 2007-09-24 20:57:19.000000000 +0200 -+++ linux-2.6.22/drivers/serial/serial_core.c 2007-09-24 20:57:20.000000000 +0200 -@@ -2128,6 +2128,14 @@ - spin_unlock_irqrestore(&port->lock, flags); - - /* -+ * If this driver supports console, and it hasn't been -+ * successfully registered yet, try to re-register it. -+ * It may be that the port was not available. -+ */ -+ if (port->cons && !(port->cons->flags & CON_ENABLED)) -+ register_console(port->cons); -+ -+ /* - * Power down all ports by default, except the - * console if we have one. - */ -@@ -2288,6 +2296,7 @@ - } - - state->port = port; -+ state->pm_state = -1; - - port->cons = drv->cons; - port->info = state->info; -@@ -2310,15 +2319,6 @@ - tty_register_device(drv->tty_driver, port->line, port->dev); - - /* -- * If this driver supports console, and it hasn't been -- * successfully registered yet, try to re-register it. -- * It may be that the port was not available. -- */ -- if (port->type != PORT_UNKNOWN && -- port->cons && !(port->cons->flags & CON_ENABLED)) -- register_console(port->cons); -- -- /* - * Ensure UPF_DEAD is not set. - */ - port->flags &= ~UPF_DEAD; -Index: linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.c -=================================================================== ---- linux-2.6.22.orig/drivers/usb/gadget/pxa2xx_udc.c 2007-09-24 20:57:04.000000000 +0200 -+++ linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.c 2007-09-24 20:57:20.000000000 +0200 -@@ -43,6 +43,8 @@ - #include <linux/platform_device.h> - #include <linux/dma-mapping.h> - #include <linux/irq.h> -+#include <linux/clk.h> -+#include <linux/err.h> - - #include <asm/byteorder.h> - #include <asm/dma.h> -@@ -1157,7 +1159,7 @@ - - #ifdef CONFIG_ARCH_PXA - /* Disable clock for USB device */ -- pxa_set_cken(CKEN_USB, 0); -+ clk_disable(dev->clk); - #endif - - ep0_idle (dev); -@@ -1202,8 +1204,7 @@ - - #ifdef CONFIG_ARCH_PXA - /* Enable clock for USB device */ -- pxa_set_cken(CKEN_USB, 1); -- udelay(5); -+ clk_enable(dev->clk); - #endif - - /* try to clear these bits before we enable the udc */ -@@ -2137,6 +2138,14 @@ - if (irq < 0) - return -ENODEV; - -+#ifdef CONFIG_ARCH_PXA -+ dev->clk = clk_get(&pdev->dev, "UDCCLK"); -+ if (IS_ERR(dev->clk)) { -+ retval = PTR_ERR(dev->clk); -+ goto err_clk; -+ } -+#endif -+ - pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, - dev->has_cfr ? "" : " (!cfr)", - SIZE_STR "(pio)" -@@ -2152,11 +2161,10 @@ - dev_dbg(&pdev->dev, - "can't get vbus gpio %d, err: %d\n", - dev->mach->gpio_vbus, retval); -- return -EBUSY; -+ goto err_gpio_vbus; - } - gpio_direction_input(dev->mach->gpio_vbus); - vbus_irq = gpio_to_irq(dev->mach->gpio_vbus); -- set_irq_type(vbus_irq, IRQT_BOTHEDGE); - } else - vbus_irq = 0; - -@@ -2166,9 +2174,7 @@ - dev_dbg(&pdev->dev, - "can't get pullup gpio %d, err: %d\n", - dev->mach->gpio_pullup, retval); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_gpio_pullup; - } - gpio_direction_output(dev->mach->gpio_pullup, 0); - } -@@ -2195,11 +2201,7 @@ - if (retval != 0) { - printk(KERN_ERR "%s: can't get irq %d, err %d\n", - driver_name, irq, retval); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_irq1; - } - dev->got_irq = 1; - -@@ -2213,12 +2215,7 @@ - printk(KERN_ERR "%s: can't get irq %i, err %d\n", - driver_name, LUBBOCK_USB_DISC_IRQ, retval); - lubbock_fail0: -- free_irq(irq, dev); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_irq_lub; - } - retval = request_irq(LUBBOCK_USB_IRQ, - lubbock_vbus_irq, -@@ -2234,22 +2231,37 @@ - #endif - if (vbus_irq) { - retval = request_irq(vbus_irq, udc_vbus_irq, -- IRQF_DISABLED | IRQF_SAMPLE_RANDOM, -+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM | -+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, - driver_name, dev); - if (retval != 0) { - printk(KERN_ERR "%s: can't get irq %i, err %d\n", - driver_name, vbus_irq, retval); -- free_irq(irq, dev); -- if (dev->mach->gpio_pullup) -- gpio_free(dev->mach->gpio_pullup); -- if (dev->mach->gpio_vbus) -- gpio_free(dev->mach->gpio_vbus); -- return -EBUSY; -+ goto err_vbus_irq; - } - } - create_proc_files(); - - return 0; -+ -+ err_vbus_irq: -+#ifdef CONFIG_ARCH_LUBBOCK -+ free_irq(LUBBOCK_USB_DISC_IRQ, dev); -+ err_irq_lub: -+#endif -+ free_irq(irq, dev); -+ err_irq1: -+ if (dev->mach->gpio_pullup) -+ gpio_free(dev->mach->gpio_pullup); -+ err_gpio_pullup: -+ if (dev->mach->gpio_vbus) -+ gpio_free(dev->mach->gpio_vbus); -+ err_gpio_vbus: -+#ifdef CONFIG_ARCH_PXA -+ clk_put(dev->clk); -+ err_clk: -+#endif -+ return retval; - } - - static void pxa2xx_udc_shutdown(struct platform_device *_dev) -@@ -2284,6 +2296,10 @@ - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - -+#ifdef CONFIG_ARCH_PXA -+ clk_put(dev->clk); -+#endif -+ - platform_set_drvdata(pdev, NULL); - the_controller = NULL; - return 0; -Index: linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.h -=================================================================== ---- linux-2.6.22.orig/drivers/usb/gadget/pxa2xx_udc.h 2007-09-24 20:57:17.000000000 +0200 -+++ linux-2.6.22/drivers/usb/gadget/pxa2xx_udc.h 2007-09-24 20:57:20.000000000 +0200 -@@ -125,6 +125,7 @@ - struct timer_list timer; - - struct device *dev; -+ struct clk *clk; - struct pxa2xx_udc_mach_info *mach; - u64 dma_mask; - struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; -Index: linux-2.6.22/drivers/video/pxafb.c -=================================================================== ---- linux-2.6.22.orig/drivers/video/pxafb.c 2007-09-24 20:57:18.000000000 +0200 -+++ linux-2.6.22/drivers/video/pxafb.c 2007-09-24 20:57:20.000000000 +0200 -@@ -37,6 +37,8 @@ - #include <linux/cpufreq.h> - #include <linux/platform_device.h> - #include <linux/dma-mapping.h> -+#include <linux/clk.h> -+#include <linux/err.h> - - #include <asm/hardware.h> - #include <asm/io.h> -@@ -574,15 +576,15 @@ - * - * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below. - */ --static inline unsigned int get_pcd(unsigned int pixclock) -+static inline unsigned int get_pcd(struct pxafb_info *fbi, unsigned int pixclock) - { - unsigned long long pcd; - - /* FIXME: Need to take into account Double Pixel Clock mode -- * (DPC) bit? or perhaps set it based on the various clock -- * speeds */ -- -- pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock; -+ * (DPC) bit? or perhaps set it based on the various clock -+ * speeds */ -+ pcd = (unsigned long long)(clk_get_rate(fbi->clk) / 10000); -+ pcd *= pixclock; - do_div(pcd, 100000000 * 2); - /* no need for this, since we should subtract 1 anyway. they cancel */ - /* pcd += 1; */ /* make up for integer math truncations */ -@@ -591,19 +593,21 @@ - - /* - * Some touchscreens need hsync information from the video driver to -- * function correctly. We export it here. -+ * function correctly. We export it here. Note that 'hsync_time' and -+ * the value returned from pxafb_get_hsync_time() is the *reciprocal* -+ * of the hsync period in seconds. - */ - static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd) - { -- unsigned long long htime; -+ unsigned long htime; - - if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) { - fbi->hsync_time=0; - return; - } - -- htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000; -- do_div(htime, pcd * fbi->fb.var.hsync_len); -+ htime = clk_get_rate(fbi->clk) / (pcd * fbi->fb.var.hsync_len); -+ - fbi->hsync_time = htime; - } - -@@ -628,7 +632,7 @@ - { - struct pxafb_lcd_reg new_regs; - u_long flags; -- u_int lines_per_panel, pcd = get_pcd(var->pixclock); -+ u_int lines_per_panel, pcd = get_pcd(fbi, var->pixclock); - - pr_debug("pxafb: Configuring PXA LCD\n"); - -@@ -908,7 +912,7 @@ - pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); - - /* enable LCD controller clock */ -- pxa_set_cken(CKEN_LCD, 1); -+ clk_enable(fbi->clk); - - down(&fcs_lcd_sem); - /* Sequence from 11.7.10 */ -@@ -950,7 +954,7 @@ - up(&fcs_lcd_sem); - - /* disable LCD controller clock */ -- pxa_set_cken(CKEN_LCD, 0); -+ clk_disable(fbi->clk); - } - - /* -@@ -1161,7 +1165,7 @@ - if ((clkinfo->old == 13000)) - break; - -- pcd = get_pcd(fbi->fb.var.pixclock); -+ pcd = get_pcd(fbi, fbi->fb.var.pixclock); - lccr3 = fbi->reg_lccr3; - set_hsync_time(fbi, pcd); - fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); -@@ -1293,6 +1297,12 @@ - memset(fbi, 0, sizeof(struct pxafb_info)); - fbi->dev = dev; - -+ fbi->clk = clk_get(dev, "LCDCLK"); -+ if (IS_ERR(fbi->clk)) { -+ kfree(fbi); -+ return NULL; -+ } -+ - strcpy(fbi->fb.fix.id, PXA_NAME); - - fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; -Index: linux-2.6.22/drivers/video/pxafb.h -=================================================================== ---- linux-2.6.22.orig/drivers/video/pxafb.h 2007-09-24 20:57:18.000000000 +0200 -+++ linux-2.6.22/drivers/video/pxafb.h 2007-09-24 20:57:20.000000000 +0200 -@@ -94,6 +94,7 @@ - struct pxafb_info { - struct fb_info fb; - struct device *dev; -+ struct clk *clk; - - /* - * These are the addresses we mapped -Index: linux-2.6.22/include/asm-arm/arch-pxa/hardware.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/hardware.h 2007-09-24 20:57:09.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/hardware.h 2007-09-24 20:57:20.000000000 +0200 -@@ -80,6 +80,24 @@ - _id == 0x411; \ - }) - -+#define __cpu_is_pxa300(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x688; \ -+ }) -+ -+#define __cpu_is_pxa310(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x689; \ -+ }) -+ -+#define __cpu_is_pxa320(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 4 & 0xfff; \ -+ _id == 0x603 || _id == 0x682; \ -+ }) -+ - #define cpu_is_pxa21x() \ - ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ -@@ -98,6 +116,53 @@ - __cpu_is_pxa27x(id); \ - }) - -+#define cpu_is_pxa300() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa300(id); \ -+ }) -+ -+#define cpu_is_pxa310() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa310(id); \ -+ }) -+ -+#define cpu_is_pxa320() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa320(id); \ -+ }) -+ -+/* -+ * CPUID Core Generation Bit -+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x -+ * == 0x3 for pxa300/pxa310/pxa320 -+ */ -+#define __cpu_is_pxa2xx(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 13 & 0x7; \ -+ _id <= 0x2; \ -+ }) -+ -+#define __cpu_is_pxa3xx(id) \ -+ ({ \ -+ unsigned int _id = (id) >> 13 & 0x7; \ -+ _id == 0x3; \ -+ }) -+ -+#define cpu_is_pxa2xx() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa2xx(id); \ -+ }) -+ -+#define cpu_is_pxa3xx() \ -+ ({ \ -+ unsigned int id = read_cpuid(CPUID_ID); \ -+ __cpu_is_pxa3xx(id); \ -+ }) -+ - /* - * Handy routine to set GPIO alternate functions - */ -@@ -116,13 +181,16 @@ - /* - * Routine to enable or disable CKEN - */ --extern void pxa_set_cken(int clock, int enable); -+static inline void __deprecated pxa_set_cken(int clock, int enable) -+{ -+ extern void __pxa_set_cken(int clock, int enable); -+ __pxa_set_cken(clock, enable); -+} - - /* - * return current memory and LCD clock frequency in units of 10kHz - */ - extern unsigned int get_memclk_frequency_10khz(void); --extern unsigned int get_lcdclk_frequency_10khz(void); - - #endif - -Index: linux-2.6.22/include/asm-arm/arch-pxa/irqs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/irqs.h 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/irqs.h 2007-09-24 20:57:20.000000000 +0200 -@@ -66,12 +66,6 @@ - #define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) - #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - --#if defined(CONFIG_PXA25x) --#define PXA_LAST_GPIO 84 --#elif defined(CONFIG_PXA27x) --#define PXA_LAST_GPIO 127 --#endif -- - /* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use -Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa300.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa300.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,574 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp-pxa300.h -+ * -+ * PXA300/PXA310 specific MFP configuration definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_PXA300_H -+#define __ASM_ARCH_MFP_PXA300_H -+ -+#include <asm/arch/mfp.h> -+ -+/* GPIO */ -+#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) -+#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) -+#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) -+#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) -+#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) -+#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -+#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -+#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -+#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -+#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -+#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) -+ -+#ifdef CONFIG_CPU_PXA310 -+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -+#endif -+ -+/* Chip Select */ -+#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) -+ -+/* AC97 */ -+#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) -+#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) -+#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) -+#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) -+#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) -+#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) -+#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) -+#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) -+#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) -+#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) -+#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) -+ -+/* I2C */ -+#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) -+#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) -+ -+/* QCI */ -+#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) -+#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) -+#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) -+#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) -+#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) -+#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) -+#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) -+#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) -+#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) -+#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -+#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -+#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) -+#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) -+#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) -+ -+/* KEYPAD */ -+#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) -+#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) -+#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) -+#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) -+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) -+#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -+#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -+#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) -+#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) -+#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) -+#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -+#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -+#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -+#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -+#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -+#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -+#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -+#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -+#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -+#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -+#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -+#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -+#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -+#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) -+#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -+#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) -+#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -+#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -+#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -+#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) -+ -+#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) -+#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) -+#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -+#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -+#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) -+#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) -+#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) -+#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) -+#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) -+#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) -+#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -+#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -+#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -+#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -+#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -+#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -+#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -+#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) -+#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) -+ -+#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -+#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) -+#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) -+#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -+#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) -+#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) -+#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) -+#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) -+#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) -+#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -+#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -+#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) -+#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) -+#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) -+#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) -+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -+#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) -+#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -+#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) -+#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) -+ -+/* LCD */ -+#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) -+#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) -+#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) -+#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) -+#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) -+#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) -+#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) -+#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) -+#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) -+#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) -+#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) -+#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) -+#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) -+#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) -+#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) -+#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) -+#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) -+#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) -+#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) -+#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) -+#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) -+#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X) -+#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) -+#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) -+ -+#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) -+#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) -+#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) -+ -+/* Mini-LCD */ -+#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) -+#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) -+#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) -+#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) -+#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) -+#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) -+#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) -+#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) -+#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) -+#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) -+#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) -+#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) -+#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) -+#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) -+#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) -+#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) -+#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) -+#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) -+#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) -+#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) -+ -+/* MMC1 */ -+#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -+#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -+#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) -+#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) -+#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) -+#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) -+#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -+#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -+ -+/* MMC2 */ -+#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) -+#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) -+#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) -+#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) -+#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) -+#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) -+#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -+#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -+#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -+#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -+#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) -+#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) -+ -+/* SSP1 */ -+#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) -+#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) -+#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) -+#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) -+#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) -+#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) -+#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) -+#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) -+#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) -+#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) -+#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) -+#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) -+#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) -+#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) -+#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) -+#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) -+#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) -+#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) -+#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) -+#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) -+ -+/* SSP2 */ -+#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) -+#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) -+#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) -+#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) -+#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) -+#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) -+#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) -+#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) -+#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) -+#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) -+#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) -+#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) -+#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) -+#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) -+#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) -+#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) -+#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) -+#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) -+#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) -+#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) -+#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) -+#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) -+#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) -+#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) -+ -+/* SSP3 */ -+#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) -+#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) -+#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) -+#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) -+#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) -+#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) -+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) -+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) -+#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) -+#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) -+#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) -+#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) -+ -+/* SSP4 */ -+#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -+#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -+#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) -+#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) -+#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) -+#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) -+ -+/* UART1 */ -+#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) -+#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) -+#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) -+#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) -+#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) -+#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) -+ -+#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) -+#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) -+#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) -+#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) -+#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) -+#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -+ -+#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) -+#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) -+#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) -+#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) -+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -+#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) -+ -+#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) -+#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) -+#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) -+#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) -+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -+#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) -+ -+#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) -+#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) -+#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) -+ -+#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) -+#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) -+#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) -+ -+#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -+#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) -+#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) -+#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) -+#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) -+#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) -+#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) -+#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) -+ -+#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) -+#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -+#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) -+#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) -+#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) -+#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -+#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) -+ -+/* UART2 */ -+#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) -+#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) -+#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) -+#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) -+ -+#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) -+#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) -+#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) -+#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) -+ -+#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) -+#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) -+#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) -+#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) -+ -+#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) -+#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) -+#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) -+#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) -+ -+/* UART3 */ -+#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) -+#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) -+#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) -+#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) -+ -+#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) -+#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) -+#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) -+#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) -+ -+#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) -+#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) -+#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) -+#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) -+#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) -+#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -+ -+#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) -+#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) -+#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) -+#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) -+#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) -+#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -+ -+/* USB Host */ -+#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) -+#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) -+ -+/* USB P3 */ -+#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) -+#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) -+#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) -+#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) -+#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) -+#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) -+ -+/* PWM */ -+#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) -+#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) -+#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) -+#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) -+ -+/* CIR */ -+#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) -+#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) -+ -+#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) -+#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) -+ -+#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) -+#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) -+#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) -+#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) -+#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) -+#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) -+#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) -+#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) -+#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) -+#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) -+ -+#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) -+ -+#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) -+#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) -+#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) -+#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) -+ -+#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) -+#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) -+#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) -+ -+/* -+ * PXA300 specific MFP configurations -+ */ -+#ifdef CONFIG_CPU_PXA300 -+#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) -+#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) -+#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) -+#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) -+#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) -+#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) -+#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) -+#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) -+#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) -+#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) -+#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) -+#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) -+ -+/* U2D UTMI */ -+#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) -+#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) -+#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) -+#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) -+#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) -+#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) -+#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) -+#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) -+#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) -+#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) -+#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) -+#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) -+#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) -+#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) -+#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) -+#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) -+#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) -+#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) -+#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) -+#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) -+#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) -+#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) -+#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) -+#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) -+#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) -+#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) -+#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) -+#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) -+#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) -+#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) -+#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) -+#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) -+#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) -+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) -+#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) -+#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) -+#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) -+#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) -+#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) -+#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) -+#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) -+#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) -+#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) -+#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) -+#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) -+#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) -+#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) -+#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) -+#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) -+#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) -+#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) -+#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) -+#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) -+#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) -+#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) -+#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) -+#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) -+#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) -+#endif /* CONFIG_CPU_PXA300 */ -+ -+/* -+ * PXA310 specific MFP configurations -+ */ -+#ifdef CONFIG_CPU_PXA310 -+/* USB P2 */ -+#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) -+#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) -+#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) -+#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) -+#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) -+#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) -+ -+/* MMC1 */ -+#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) -+#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) -+ -+/* MMC3 */ -+#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) -+#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) -+#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) -+#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) -+#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) -+#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) -+#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) -+#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) -+ -+/* ULPI */ -+#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) -+#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) -+#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) -+#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) -+#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) -+#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) -+#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) -+#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) -+#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) -+#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) -+ -+#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -+#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -+#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) -+#endif /* CONFIG_CPU_PXA310 */ -+ -+#endif /* __ASM_ARCH_MFP_PXA300_H */ -Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa320.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/mfp-pxa320.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,446 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp-pxa320.h -+ * -+ * PXA320 specific MFP configuration definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * 2007-08-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_PXA320_H -+#define __ASM_ARCH_MFP_PXA320_H -+ -+#include <asm/arch/mfp.h> -+ -+/* GPIO */ -+#define GPIO46_GPIO MFP_CFG(GPIO6, AF0) -+#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -+#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -+#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -+#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) -+ -+#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -+#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -+#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -+#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -+#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -+#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -+#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) -+#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) -+#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) -+#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) -+#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) -+ -+/* Chip Select */ -+#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) -+ -+/* AC97 */ -+#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) -+#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) -+#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) -+#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) -+#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) -+#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) -+#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) -+#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) -+#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) -+#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) -+#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) -+ -+/* I2C */ -+#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) -+#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) -+ -+/* QCI */ -+#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) -+#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) -+#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) -+#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) -+#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) -+#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) -+#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) -+#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) -+#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) -+#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) -+#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) -+#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) -+#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) -+#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) -+ -+#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) -+ -+#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) -+#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) -+#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) -+#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) -+#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) -+#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) -+#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) -+#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) -+ -+#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) -+#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) -+#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -+#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -+ -+#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) -+#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) -+#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -+#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -+#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -+#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -+#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -+#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -+ -+#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -+#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -+#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -+#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -+#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -+#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -+#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -+#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -+ -+#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) -+#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) -+ -+#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -+#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -+#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -+#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -+#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -+#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -+#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -+#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -+ -+#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) -+#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) -+#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -+#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -+#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -+#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -+#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -+#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -+ -+#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) -+#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) -+#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -+#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -+#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -+#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) -+ -+#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -+#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -+#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -+#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -+#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -+#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) -+#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) -+#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -+ -+/* LCD */ -+#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) -+#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) -+#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) -+#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) -+#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) -+#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) -+#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) -+#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) -+#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) -+#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) -+#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) -+#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) -+#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) -+#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) -+#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) -+#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) -+#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) -+#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) -+#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) -+#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) -+#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) -+#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) -+#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) -+#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) -+#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) -+#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) -+ -+#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) -+#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) -+#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) -+#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) -+#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) -+#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) -+#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) -+#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) -+#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) -+#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) -+#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) -+#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) -+#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) -+#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) -+#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) -+#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) -+#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) -+#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) -+#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) -+#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) -+#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) -+#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) -+#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) -+#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) -+ -+/* MMC1 */ -+#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) -+#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) -+#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) -+#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) -+#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) -+#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -+#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -+#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -+#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -+#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) -+#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) -+#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) -+#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) -+ -+#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) -+#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) -+#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) -+#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) -+#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -+#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -+ -+#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) -+#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) -+#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) -+#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) -+#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) -+#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) -+#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) -+#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) -+#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) -+#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -+#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) -+#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -+ -+/* 1-Wire */ -+#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) -+#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -+ -+/* SSP1 */ -+#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) -+#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) -+#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) -+#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) -+#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) -+#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) -+#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) -+#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) -+ -+/* SSP2 */ -+#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) -+#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) -+#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) -+#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) -+#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) -+#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) -+#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) -+#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) -+#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) -+ -+#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) -+#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) -+#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) -+#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) -+#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) -+#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) -+#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) -+#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) -+#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) -+#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) -+#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) -+#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) -+ -+#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) -+#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) -+#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) -+#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) -+#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -+#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -+#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) -+ -+/* UART1 */ -+#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) -+#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) -+#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) -+#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) -+#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) -+#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) -+#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) -+#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) -+#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) -+#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) -+#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) -+#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) -+#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) -+#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) -+#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) -+#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) -+#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) -+#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) -+#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) -+#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) -+#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) -+#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) -+#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -+#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -+#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) -+#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -+#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) -+#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) -+ -+/* UART2 */ -+#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) -+#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) -+#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) -+#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) -+#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -+#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -+#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) -+#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) -+ -+/* UART3 */ -+#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) -+#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) -+#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) -+#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) -+#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) -+#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) -+#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) -+#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -+#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -+#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) -+#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) -+#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -+#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) -+#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) -+#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) -+#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) -+#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) -+#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) -+#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) -+#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) -+ -+ -+/* USB 2.0 UTMI */ -+#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) -+#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) -+#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) -+#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) -+#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) -+#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) -+#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) -+#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) -+#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) -+#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) -+#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) -+#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) -+#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) -+#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) -+#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) -+#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) -+#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) -+#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) -+ -+#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) -+#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) -+#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) -+#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) -+#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) -+#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) -+#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) -+#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) -+ -+#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) -+#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) -+#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) -+#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) -+#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) -+#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) -+#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) -+#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) -+ -+#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) -+#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) -+#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) -+ -+#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) -+#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) -+#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) -+#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) -+ -+#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) -+#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) -+#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) -+ -+#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) -+#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) -+#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) -+ -+#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) -+#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) -+#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) -+#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) -+ -+#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) -+#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) -+#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) -+ -+#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) -+#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) -+#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) -+ -+/* USB Host 1.1 */ -+#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) -+#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) -+ -+/* USB P2 */ -+#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) -+#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) -+#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) -+#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) -+#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) -+#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) -+#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) -+#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) -+#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) -+#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) -+ -+/* USB P3 */ -+#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) -+#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) -+#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) -+#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) -+#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) -+#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) -+ -+#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) -+#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) -+ -+#define GPIO2_RDY MFP_CFG(GPIO2, AF1) -+#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) -+ -+#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) -+#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) -+#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) -+#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) -+ -+#endif /* __ASM_ARCH_MFP_PXA320_H */ -Index: linux-2.6.22/include/asm-arm/arch-pxa/mfp.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/mfp.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,576 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/mfp.h -+ * -+ * Multi-Function Pin Definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * -+ * 2007-8-21: eric miao <eric.y.miao@gmail.com> -+ * initial version -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_MFP_H -+#define __ASM_ARCH_MFP_H -+ -+#define MFPR_BASE (0x40e10000) -+#define MFPR_SIZE (PAGE_SIZE) -+ -+#define mfp_to_gpio(m) ((m) % 128) -+ -+/* list of all the configurable MFP pins */ -+enum { -+ MFP_PIN_INVALID = -1, -+ -+ MFP_PIN_GPIO0 = 0, -+ MFP_PIN_GPIO1, -+ MFP_PIN_GPIO2, -+ MFP_PIN_GPIO3, -+ MFP_PIN_GPIO4, -+ MFP_PIN_GPIO5, -+ MFP_PIN_GPIO6, -+ MFP_PIN_GPIO7, -+ MFP_PIN_GPIO8, -+ MFP_PIN_GPIO9, -+ MFP_PIN_GPIO10, -+ MFP_PIN_GPIO11, -+ MFP_PIN_GPIO12, -+ MFP_PIN_GPIO13, -+ MFP_PIN_GPIO14, -+ MFP_PIN_GPIO15, -+ MFP_PIN_GPIO16, -+ MFP_PIN_GPIO17, -+ MFP_PIN_GPIO18, -+ MFP_PIN_GPIO19, -+ MFP_PIN_GPIO20, -+ MFP_PIN_GPIO21, -+ MFP_PIN_GPIO22, -+ MFP_PIN_GPIO23, -+ MFP_PIN_GPIO24, -+ MFP_PIN_GPIO25, -+ MFP_PIN_GPIO26, -+ MFP_PIN_GPIO27, -+ MFP_PIN_GPIO28, -+ MFP_PIN_GPIO29, -+ MFP_PIN_GPIO30, -+ MFP_PIN_GPIO31, -+ MFP_PIN_GPIO32, -+ MFP_PIN_GPIO33, -+ MFP_PIN_GPIO34, -+ MFP_PIN_GPIO35, -+ MFP_PIN_GPIO36, -+ MFP_PIN_GPIO37, -+ MFP_PIN_GPIO38, -+ MFP_PIN_GPIO39, -+ MFP_PIN_GPIO40, -+ MFP_PIN_GPIO41, -+ MFP_PIN_GPIO42, -+ MFP_PIN_GPIO43, -+ MFP_PIN_GPIO44, -+ MFP_PIN_GPIO45, -+ MFP_PIN_GPIO46, -+ MFP_PIN_GPIO47, -+ MFP_PIN_GPIO48, -+ MFP_PIN_GPIO49, -+ MFP_PIN_GPIO50, -+ MFP_PIN_GPIO51, -+ MFP_PIN_GPIO52, -+ MFP_PIN_GPIO53, -+ MFP_PIN_GPIO54, -+ MFP_PIN_GPIO55, -+ MFP_PIN_GPIO56, -+ MFP_PIN_GPIO57, -+ MFP_PIN_GPIO58, -+ MFP_PIN_GPIO59, -+ MFP_PIN_GPIO60, -+ MFP_PIN_GPIO61, -+ MFP_PIN_GPIO62, -+ MFP_PIN_GPIO63, -+ MFP_PIN_GPIO64, -+ MFP_PIN_GPIO65, -+ MFP_PIN_GPIO66, -+ MFP_PIN_GPIO67, -+ MFP_PIN_GPIO68, -+ MFP_PIN_GPIO69, -+ MFP_PIN_GPIO70, -+ MFP_PIN_GPIO71, -+ MFP_PIN_GPIO72, -+ MFP_PIN_GPIO73, -+ MFP_PIN_GPIO74, -+ MFP_PIN_GPIO75, -+ MFP_PIN_GPIO76, -+ MFP_PIN_GPIO77, -+ MFP_PIN_GPIO78, -+ MFP_PIN_GPIO79, -+ MFP_PIN_GPIO80, -+ MFP_PIN_GPIO81, -+ MFP_PIN_GPIO82, -+ MFP_PIN_GPIO83, -+ MFP_PIN_GPIO84, -+ MFP_PIN_GPIO85, -+ MFP_PIN_GPIO86, -+ MFP_PIN_GPIO87, -+ MFP_PIN_GPIO88, -+ MFP_PIN_GPIO89, -+ MFP_PIN_GPIO90, -+ MFP_PIN_GPIO91, -+ MFP_PIN_GPIO92, -+ MFP_PIN_GPIO93, -+ MFP_PIN_GPIO94, -+ MFP_PIN_GPIO95, -+ MFP_PIN_GPIO96, -+ MFP_PIN_GPIO97, -+ MFP_PIN_GPIO98, -+ MFP_PIN_GPIO99, -+ MFP_PIN_GPIO100, -+ MFP_PIN_GPIO101, -+ MFP_PIN_GPIO102, -+ MFP_PIN_GPIO103, -+ MFP_PIN_GPIO104, -+ MFP_PIN_GPIO105, -+ MFP_PIN_GPIO106, -+ MFP_PIN_GPIO107, -+ MFP_PIN_GPIO108, -+ MFP_PIN_GPIO109, -+ MFP_PIN_GPIO110, -+ MFP_PIN_GPIO111, -+ MFP_PIN_GPIO112, -+ MFP_PIN_GPIO113, -+ MFP_PIN_GPIO114, -+ MFP_PIN_GPIO115, -+ MFP_PIN_GPIO116, -+ MFP_PIN_GPIO117, -+ MFP_PIN_GPIO118, -+ MFP_PIN_GPIO119, -+ MFP_PIN_GPIO120, -+ MFP_PIN_GPIO121, -+ MFP_PIN_GPIO122, -+ MFP_PIN_GPIO123, -+ MFP_PIN_GPIO124, -+ MFP_PIN_GPIO125, -+ MFP_PIN_GPIO126, -+ MFP_PIN_GPIO127, -+ MFP_PIN_GPIO0_2, -+ MFP_PIN_GPIO1_2, -+ MFP_PIN_GPIO2_2, -+ MFP_PIN_GPIO3_2, -+ MFP_PIN_GPIO4_2, -+ MFP_PIN_GPIO5_2, -+ MFP_PIN_GPIO6_2, -+ MFP_PIN_GPIO7_2, -+ MFP_PIN_GPIO8_2, -+ MFP_PIN_GPIO9_2, -+ MFP_PIN_GPIO10_2, -+ MFP_PIN_GPIO11_2, -+ MFP_PIN_GPIO12_2, -+ MFP_PIN_GPIO13_2, -+ MFP_PIN_GPIO14_2, -+ MFP_PIN_GPIO15_2, -+ MFP_PIN_GPIO16_2, -+ MFP_PIN_GPIO17_2, -+ -+ MFP_PIN_ULPI_STP, -+ MFP_PIN_ULPI_NXT, -+ MFP_PIN_ULPI_DIR, -+ -+ MFP_PIN_nXCVREN, -+ MFP_PIN_DF_CLE_nOE, -+ MFP_PIN_DF_nADV1_ALE, -+ MFP_PIN_DF_SCLK_E, -+ MFP_PIN_DF_SCLK_S, -+ MFP_PIN_nBE0, -+ MFP_PIN_nBE1, -+ MFP_PIN_DF_nADV2_ALE, -+ MFP_PIN_DF_INT_RnB, -+ MFP_PIN_DF_nCS0, -+ MFP_PIN_DF_nCS1, -+ MFP_PIN_nLUA, -+ MFP_PIN_nLLA, -+ MFP_PIN_DF_nWE, -+ MFP_PIN_DF_ALE_nWE, -+ MFP_PIN_DF_nRE_nOE, -+ MFP_PIN_DF_ADDR0, -+ MFP_PIN_DF_ADDR1, -+ MFP_PIN_DF_ADDR2, -+ MFP_PIN_DF_ADDR3, -+ MFP_PIN_DF_IO0, -+ MFP_PIN_DF_IO1, -+ MFP_PIN_DF_IO2, -+ MFP_PIN_DF_IO3, -+ MFP_PIN_DF_IO4, -+ MFP_PIN_DF_IO5, -+ MFP_PIN_DF_IO6, -+ MFP_PIN_DF_IO7, -+ MFP_PIN_DF_IO8, -+ MFP_PIN_DF_IO9, -+ MFP_PIN_DF_IO10, -+ MFP_PIN_DF_IO11, -+ MFP_PIN_DF_IO12, -+ MFP_PIN_DF_IO13, -+ MFP_PIN_DF_IO14, -+ MFP_PIN_DF_IO15, -+ -+ MFP_PIN_MAX, -+}; -+ -+/* -+ * Table that determines the low power modes outputs, with actual settings -+ * used in parentheses for don't-care values. Except for the float output, -+ * the configured driven and pulled levels match, so if there is a need for -+ * non-LPM pulled output, the same configuration could probably be used. -+ * -+ * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel -+ * (bit 7) (bit 8) (bit 14d) (bit 13d) -+ * -+ * Drive 0 0 0 0 X (1) 0 -+ * Drive 1 0 1 X (1) 0 0 -+ * Pull hi (1) 1 X(1) 1 0 0 -+ * Pull lo (0) 1 X(0) 0 1 0 -+ * Z (float) 1 X(0) 0 0 0 -+ */ -+#define MFP_LPM_DRIVE_LOW 0x8 -+#define MFP_LPM_DRIVE_HIGH 0x6 -+#define MFP_LPM_PULL_HIGH 0x7 -+#define MFP_LPM_PULL_LOW 0x9 -+#define MFP_LPM_FLOAT 0x1 -+#define MFP_LPM_PULL_NEITHER 0x0 -+ -+/* -+ * The pullup and pulldown state of the MFP pin is by default determined by -+ * selected alternate function. In case some buggy devices need to override -+ * this default behavior, pxa3xx_mfp_set_pull() can be invoked with one of -+ * the following definition as the parameter. -+ * -+ * Definition pull_sel pullup_en pulldown_en -+ * MFP_PULL_HIGH 1 1 0 -+ * MFP_PULL_LOW 1 0 1 -+ * MFP_PULL_BOTH 1 1 1 -+ * MFP_PULL_NONE 1 0 0 -+ * MFP_PULL_DEFAULT 0 X X -+ * -+ * NOTE: pxa3xx_mfp_set_pull() will modify the PULLUP_EN and PULLDOWN_EN -+ * bits, which will cause potential conflicts with the low power mode -+ * setting, device drivers should take care of this -+ */ -+#define MFP_PULL_BOTH (0x7u) -+#define MFP_PULL_HIGH (0x6u) -+#define MFP_PULL_LOW (0x5u) -+#define MFP_PULL_NONE (0x4u) -+#define MFP_PULL_DEFAULT (0x0u) -+ -+#define MFP_AF0 (0) -+#define MFP_AF1 (1) -+#define MFP_AF2 (2) -+#define MFP_AF3 (3) -+#define MFP_AF4 (4) -+#define MFP_AF5 (5) -+#define MFP_AF6 (6) -+#define MFP_AF7 (7) -+ -+#define MFP_DS01X (0) -+#define MFP_DS02X (1) -+#define MFP_DS03X (2) -+#define MFP_DS04X (3) -+#define MFP_DS06X (4) -+#define MFP_DS08X (5) -+#define MFP_DS10X (6) -+#define MFP_DS12X (7) -+ -+#define MFP_EDGE_BOTH 0x3 -+#define MFP_EDGE_RISE 0x2 -+#define MFP_EDGE_FALL 0x1 -+#define MFP_EDGE_NONE 0x0 -+ -+#define MFPR_AF_MASK 0x0007 -+#define MFPR_DRV_MASK 0x1c00 -+#define MFPR_RDH_MASK 0x0200 -+#define MFPR_LPM_MASK 0xe180 -+#define MFPR_PULL_MASK 0xe000 -+#define MFPR_EDGE_MASK 0x0070 -+ -+#define MFPR_ALT_OFFSET 0 -+#define MFPR_ERE_OFFSET 4 -+#define MFPR_EFE_OFFSET 5 -+#define MFPR_EC_OFFSET 6 -+#define MFPR_SON_OFFSET 7 -+#define MFPR_SD_OFFSET 8 -+#define MFPR_SS_OFFSET 9 -+#define MFPR_DRV_OFFSET 10 -+#define MFPR_PD_OFFSET 13 -+#define MFPR_PU_OFFSET 14 -+#define MFPR_PS_OFFSET 15 -+ -+#define MFPR(af, drv, rdh, lpm, edge) \ -+ (((af) & 0x7) | (((drv) & 0x7) << 10) |\ -+ (((rdh) & 0x1) << 9) |\ -+ (((lpm) & 0x3) << 7) |\ -+ (((lpm) & 0x4) << 12)|\ -+ (((lpm) & 0x8) << 10)|\ -+ ((!(edge)) << 6) |\ -+ (((edge) & 0x1) << 5) |\ -+ (((edge) & 0x2) << 3)) -+ -+/* -+ * a possible MFP configuration is represented by a 32-bit integer -+ * bit 0..15 - MFPR value (16-bit) -+ * bit 16..31 - mfp pin index (used to obtain the MFPR offset) -+ * -+ * to facilitate the definition, the following macros are provided -+ * -+ * MFPR_DEFAULT - default MFPR value, with -+ * alternate function = 0, -+ * drive strength = fast 1mA (MFP_DS01X) -+ * low power mode = default -+ * release dalay hold = false (RDH bit) -+ * edge detection = none -+ * -+ * MFP_CFG - default MFPR value with alternate function -+ * MFP_CFG_DRV - default MFPR value with alternate function and -+ * pin drive strength -+ * MFP_CFG_LPM - default MFPR value with alternate function and -+ * low power mode -+ * MFP_CFG_X - default MFPR value with alternate function, -+ * pin drive strength and low power mode -+ * -+ * use -+ * -+ * MFP_CFG_PIN - to get the MFP pin index -+ * MFP_CFG_VAL - to get the corresponding MFPR value -+ */ -+ -+typedef uint32_t mfp_cfg_t; -+ -+#define MFP_CFG_PIN(mfp_cfg) (((mfp_cfg) >> 16) & 0xffff) -+#define MFP_CFG_VAL(mfp_cfg) ((mfp_cfg) & 0xffff) -+ -+#define MFPR_DEFAULT (0x0000) -+ -+#define MFP_CFG(pin, af) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af)) -+ -+#define MFP_CFG_DRV(pin, af, drv) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ -+ ((MFP_##drv) << 10) | (MFP_##af)) -+ -+#define MFP_CFG_LPM(pin, af, lpm) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT | (MFP_##af) |\ -+ (((MFP_LPM_##lpm) & 0x3) << 7) |\ -+ (((MFP_LPM_##lpm) & 0x4) << 12) |\ -+ (((MFP_LPM_##lpm) & 0x8) << 10)) -+ -+#define MFP_CFG_X(pin, af, drv, lpm) \ -+ ((MFP_PIN_##pin << 16) | MFPR_DEFAULT |\ -+ ((MFP_##drv) << 10) | (MFP_##af) |\ -+ (((MFP_LPM_##lpm) & 0x3) << 7) |\ -+ (((MFP_LPM_##lpm) & 0x4) << 12) |\ -+ (((MFP_LPM_##lpm) & 0x8) << 10)) -+ -+/* common MFP configurations - processor specific ones defined -+ * in mfp-pxa3xx.h -+ */ -+#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -+#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -+#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -+#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -+#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -+#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -+#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -+#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -+#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -+#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -+#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -+#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -+#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -+#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -+#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -+#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -+#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -+#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -+#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -+#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -+#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -+#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -+#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -+#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -+#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -+#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -+#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -+#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -+#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -+#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -+#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -+#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -+#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -+#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -+#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -+#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -+#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -+#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -+#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -+#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -+#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -+#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -+#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -+#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -+#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -+#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) -+ -+#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -+#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) -+ -+#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -+#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -+#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) -+ -+#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) -+ -+#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -+#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -+#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -+#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -+#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -+#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -+#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -+#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -+#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -+#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -+#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -+#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -+#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -+#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -+#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -+#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -+#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -+#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -+#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -+#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -+#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -+#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -+#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -+#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -+#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -+#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -+#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -+#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -+#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -+#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -+#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -+#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -+#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -+#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -+#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -+#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -+#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -+#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -+#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -+#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -+#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -+#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -+#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -+#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -+#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -+#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -+#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -+#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -+#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -+#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -+#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -+#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -+#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -+#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -+#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -+#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -+#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -+#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -+#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -+#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -+#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -+#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -+#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -+#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -+#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) -+ -+#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -+#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -+#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -+#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -+#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -+#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -+#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) -+ -+/* -+ * each MFP pin will have a MFPR register, since the offset of the -+ * register varies between processors, the processor specific code -+ * should initialize the pin offsets by pxa3xx_mfp_init_addr() -+ * -+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" -+ * structure, which represents a range of MFP pins from "start" to -+ * "end", with the offset begining at "offset", to define a single -+ * pin, let "end" = -1 -+ * -+ * use -+ * -+ * MFP_ADDR_X() to define a range of pins -+ * MFP_ADDR() to define a single pin -+ * MFP_ADDR_END to signal the end of pin offset definitions -+ */ -+struct pxa3xx_mfp_addr_map { -+ unsigned int start; -+ unsigned int end; -+ unsigned long offset; -+}; -+ -+#define MFP_ADDR_X(start, end, offset) \ -+ { MFP_PIN_##start, MFP_PIN_##end, offset } -+ -+#define MFP_ADDR(pin, offset) \ -+ { MFP_PIN_##pin, -1, offset } -+ -+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } -+ -+struct pxa3xx_mfp_pin { -+ unsigned long mfpr_off; /* MFPRxx register offset */ -+ unsigned long mfpr_val; /* MFPRxx register value */ -+}; -+ -+/* -+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access -+ * to the MFPR register -+ */ -+unsigned long pxa3xx_mfp_read(int mfp); -+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); -+ -+/* -+ * pxa3xx_mfp_set_afds - set MFP alternate function and drive strength -+ * pxa3xx_mfp_set_rdh - set MFP release delay hold on/off -+ * pxa3xx_mfp_set_lpm - set MFP low power mode state -+ * pxa3xx_mfp_set_edge - set MFP edge detection in low power mode -+ * -+ * use these functions to override/change the default configuration -+ * done by pxa3xx_mfp_set_config(s) -+ */ -+void pxa3xx_mfp_set_afds(int mfp, int af, int ds); -+void pxa3xx_mfp_set_rdh(int mfp, int rdh); -+void pxa3xx_mfp_set_lpm(int mfp, int lpm); -+void pxa3xx_mfp_set_edge(int mfp, int edge); -+ -+/* -+ * pxa3xx_mfp_config - configure the MFPR registers -+ * -+ * used by board specific initialization code -+ */ -+void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num); -+ -+/* -+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin -+ * index and MFPR register offset -+ * -+ * used by processor specific code -+ */ -+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -+void __init pxa3xx_init_mfp(void); -+ -+#endif /* __ASM_ARCH_MFP_H */ -Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-09-24 20:57:20.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/pxa-regs.h 2007-09-24 20:57:20.000000000 +0200 -@@ -1184,7 +1184,7 @@ - - #define GPIO_bit(x) (1 << ((x) & 0x1f)) - --#ifdef CONFIG_PXA27x -+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - - /* Interrupt Controller */ - -Index: linux-2.6.22/include/asm-arm/arch-pxa/pxa3xx-regs.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/pxa3xx-regs.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,75 @@ -+/* -+ * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h -+ * -+ * PXA3xx specific register definitions -+ * -+ * Copyright (C) 2007 Marvell International Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef __ASM_ARCH_PXA3XX_REGS_H -+#define __ASM_ARCH_PXA3XX_REGS_H -+ -+/* -+ * Application Subsystem Clock -+ */ -+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -+#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ -+ -+/* -+ * Clock Enable Bit -+ */ -+#define CKEN_LCD 1 /* < LCD Clock Enable */ -+#define CKEN_USBH 2 /* < USB host clock enable */ -+#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -+#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -+#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -+#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -+#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -+#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -+#define CKEN_BOOT 11 /* < Boot rom clock enable */ -+#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -+#define CKEN_MMC2 13 /* < MMC2 clock enable */ -+#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -+#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -+#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -+#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -+#define CKEN_TPM 19 /* < TPM clock enable */ -+#define CKEN_UDC 20 /* < UDC clock enable */ -+#define CKEN_BTUART 21 /* < BTUART clock enable */ -+#define CKEN_FFUART 22 /* < FFUART clock enable */ -+#define CKEN_STUART 23 /* < STUART clock enable */ -+#define CKEN_AC97 24 /* < AC97 clock enable */ -+#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -+#define CKEN_SSP1 26 /* < SSP1 clock enable */ -+#define CKEN_SSP2 27 /* < SSP2 clock enable */ -+#define CKEN_SSP3 28 /* < SSP3 clock enable */ -+#define CKEN_SSP4 29 /* < SSP4 clock enable */ -+#define CKEN_MSL0 30 /* < MSL0 clock enable */ -+#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -+#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -+#define CKEN_I2C 36 /* < I2C clock enable */ -+#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -+#define CKEN_GPIO 39 /* < GPIO clock enable */ -+#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -+#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -+#define CKEN_MINI_IM 48 /* < Mini-IM */ -+#define CKEN_MINI_LCD 49 /* < Mini LCD */ -+ -+#if defined(CONFIG_CPU_PXA310) -+#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -+#define CKEN_MVED 43 /* < MVED clock enable */ -+#endif -+ -+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -+#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ -+#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ -+ -+#endif /* __ASM_ARCH_PXA3XX_REGS_H */ -Index: linux-2.6.22/include/asm-arm/arch-pxa/timex.h -=================================================================== ---- linux-2.6.22.orig/include/asm-arm/arch-pxa/timex.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/asm-arm/arch-pxa/timex.h 2007-09-24 20:57:20.000000000 +0200 -@@ -21,4 +21,6 @@ - #else - #define CLOCK_TICK_RATE 3250000 - #endif -+#else -+#define CLOCK_TICK_RATE 3250000 - #endif -Index: linux-2.6.22/include/asm-arm/arch-pxa/zylonite.h -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.22/include/asm-arm/arch-pxa/zylonite.h 2007-09-24 20:57:20.000000000 +0200 -@@ -0,0 +1,35 @@ -+#ifndef __ASM_ARCH_ZYLONITE_H -+#define __ASM_ARCH_ZYLONITE_H -+ -+#define ZYLONITE_ETH_PHYS 0x14000000 -+ -+/* the following variables are processor specific and initialized -+ * by the corresponding zylonite_pxa3xx_init() -+ */ -+extern int gpio_backlight; -+extern int gpio_eth_irq; -+ -+extern int lcd_id; -+extern int lcd_orientation; -+ -+#ifdef CONFIG_CPU_PXA300 -+extern void zylonite_pxa300_init(void); -+#else -+static inline void zylonite_pxa300_init(void) -+{ -+ if (cpu_is_pxa300() || cpu_is_pxa310()) -+ panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); -+} -+#endif -+ -+#ifdef CONFIG_CPU_PXA320 -+extern void zylonite_pxa320_init(void); -+#else -+static inline void zylonite_pxa320_init(void) -+{ -+ if (cpu_is_pxa320()) -+ panic("%s: PXA320 not supported\n", __FUNCTION__); -+} -+#endif -+ -+#endif /* __ASM_ARCH_ZYLONITE_H */ |