packages: Separate out most of the remaining packages into recipes

Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>

6 files changed, 0 insertions, 134 deletions

diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-account b/meta/packages/pam/libpam-1.1.1/pam.d/common-account
deleted file mode 100644
index 316b17337..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/common-account
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# /etc/pam.d/common-account - authorization settings common to all services
-#
-# This file is included from other service-specific PAM config files,
-# and should contain a list of the authorization modules that define
-# the central access policy for use on the system.  The default is to
-# only deny service to users whose accounts are expired in /etc/shadow.
-#
-# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
-# To take advantage of this, it is recommended that you configure any
-# local modules either before or after the default block, and use
-# pam-auth-update to manage selection of other modules.  See
-# pam-auth-update(8) for details.
-#
-
-# here are the per-package modules (the "Primary" block)
-account	[success=1 new_authtok_reqd=done default=ignore]	pam_unix.so 
-# here's the fallback if no module succeeds
-account	requisite			pam_deny.so
-# prime the stack with a positive return value if there isn't one already;
-# this avoids us returning an error just because nothing sets a success code
-# since the modules above will each just jump around
-account	required			pam_permit.so
-# and here are more per-package modules (the "Additional" block)
-# end of pam-auth-update config
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-auth b/meta/packages/pam/libpam-1.1.1/pam.d/common-auth
deleted file mode 100644
index 460b69f19..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/common-auth
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# /etc/pam.d/common-auth - authentication settings common to all services
-#
-# This file is included from other service-specific PAM config files,
-# and should contain a list of the authentication modules that define
-# the central authentication scheme for use on the system
-# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
-# traditional Unix authentication mechanisms.
-
-# here are the per-package modules (the "Primary" block)
-auth	[success=1 default=ignore]	pam_unix.so nullok_secure
-# here's the fallback if no module succeeds
-auth	requisite			pam_deny.so
-# prime the stack with a positive return value if there isn't one already;
-# this avoids us returning an error just because nothing sets a success code
-# since the modules above will each just jump around
-auth	required			pam_permit.so
-# and here are more per-package modules (the "Additional" block)
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-password b/meta/packages/pam/libpam-1.1.1/pam.d/common-password
deleted file mode 100644
index 389605732..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/common-password
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# /etc/pam.d/common-password - password-related modules common to all services
-#
-# This file is included from other service-specific PAM config files,
-# and should contain a list of modules that define the services to be
-# used to change user passwords.  The default is pam_unix.
-
-# Explanation of pam_unix options:
-#
-# The "sha512" option enables salted SHA512 passwords.  Without this option,
-# the default is Unix crypt.  Prior releases used the option "md5".
-#
-# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
-# login.defs.
-#
-# See the pam_unix manpage for other options.
-
-# here are the per-package modules (the "Primary" block)
-password	[success=1 default=ignore]	pam_unix.so obscure sha512
-# here's the fallback if no module succeeds
-password	requisite			pam_deny.so
-# prime the stack with a positive return value if there isn't one already;
-# this avoids us returning an error just because nothing sets a success code
-# since the modules above will each just jump around
-password	required			pam_permit.so
-# and here are more per-package modules (the "Additional" block)
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-session b/meta/packages/pam/libpam-1.1.1/pam.d/common-session
deleted file mode 100644
index a594dd9d9..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/common-session
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# /etc/pam.d/common-session - session-related modules common to all services
-#
-# This file is included from other service-specific PAM config files,
-# and should contain a list of modules that define tasks to be performed
-# at the start and end of sessions of *any* kind (both interactive and
-# non-interactive).
-#
-
-# here are the per-package modules (the "Primary" block)
-session	[default=1]			pam_permit.so
-# here's the fallback if no module succeeds
-session	requisite			pam_deny.so
-# prime the stack with a positive return value if there isn't one already;
-# this avoids us returning an error just because nothing sets a success code
-# since the modules above will each just jump around
-session	required			pam_permit.so
-# and here are more per-package modules (the "Additional" block)
-session	required	pam_unix.so 
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive b/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive
deleted file mode 100644
index b110bb2b4..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/common-session-noninteractive
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# /etc/pam.d/common-session-noninteractive - session-related modules
-# common to all non-interactive services
-#
-# This file is included from other service-specific PAM config files,
-# and should contain a list of modules that define tasks to be performed
-# at the start and end of all non-interactive sessions.
-#
-
-# here are the per-package modules (the "Primary" block)
-session	[default=1]			pam_permit.so
-# here's the fallback if no module succeeds
-session	requisite			pam_deny.so
-# prime the stack with a positive return value if there isn't one already;
-# this avoids us returning an error just because nothing sets a success code
-# since the modules above will each just jump around
-session	required			pam_permit.so
-# and here are more per-package modules (the "Additional" block)
-session	required	pam_unix.so 
diff --git a/meta/packages/pam/libpam-1.1.1/pam.d/other b/meta/packages/pam/libpam-1.1.1/pam.d/other
deleted file mode 100644
index 6e40cd0c0..000000000
--- a/meta/packages/pam/libpam-1.1.1/pam.d/other
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# /etc/pam.d/other - specify the PAM fallback behaviour
-#
-# Note that this file is used for any unspecified service; for example
-#if /etc/pam.d/cron  specifies no session modules but cron calls
-#pam_open_session, the session module out of /etc/pam.d/other is
-#used.  
-
-#If you really want nothing to happen then use pam_permit.so or
-#pam_deny.so as appropriate.
-
-# We use pam_warn.so to generate syslog notes that the 'other'
-#fallback rules are being used (as a hint to suggest you should setup
-#specific PAM rules for the service and aid to debugging). We then 
-#fall back to the system default in /etc/pam.d/common-*
-
-auth       required     pam_warn.so
-auth       include      common-auth
-
-account    required     pam_warn.so
-account    include      common-account
-
-password   required     pam_warn.so
-password   include      common-password
-
-session    required     pam_warn.so
-session    include      common-session