wpa-supplicant: Upgraded to version 0.7.2

Removed local patches since the changes have accpeted in latest version
Rename wpa-supplicant-0.5.inc to wpa-supplicant-0.7.inc
Modify ${S} since the new code structure is changed
Also fixed recipe metadata

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>

11 files changed, 0 insertions, 1388 deletions

diff --git a/meta/packages/wpa-supplicant/files/99_wpa_supplicant b/meta/packages/wpa-supplicant/files/99_wpa_supplicant
deleted file mode 100644
index 6ff4dd882..000000000
--- a/meta/packages/wpa-supplicant/files/99_wpa_supplicant
+++ /dev/null
@@ -1 +0,0 @@
-d root root 0700 /var/run/wpa_supplicant none
diff --git a/meta/packages/wpa-supplicant/files/defaults-sane b/meta/packages/wpa-supplicant/files/defaults-sane
deleted file mode 100644
index 67c4cbddf..000000000
--- a/meta/packages/wpa-supplicant/files/defaults-sane
+++ /dev/null
@@ -1,8 +0,0 @@
-# Useful flags:
-#  -i <ifname>          Interface (required, unless specified in config)
-#  -D <driver>          Wireless Driver
-#  -d                   Debugging (-dd for more)
-#  -q                   Quiet (-qq for more)
-
-CONFIG="/etc/wpa_supplicant.conf"
-OPTIONS="-i eth1 -D wext"
diff --git a/meta/packages/wpa-supplicant/files/defconfig b/meta/packages/wpa-supplicant/files/defconfig
deleted file mode 100644
index c16534339..000000000
--- a/meta/packages/wpa-supplicant/files/defconfig
+++ /dev/null
@@ -1,157 +0,0 @@
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
-
-# for wpa_supplicant, wpa_cli
-LIBS = $(TARGET_LDFLAGS)
-
-# for wpa_passphrase:
-LIBS_p = $(TARGET_LDFLAGS)
-
-
-# Uncomment following two lines and fix the paths if you have installed openssl
-# in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-CONFIG_DRIVER_HERMES=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../madwifi/wpa
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for Broadcom driver
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100 driver
-#CONFIG_DRIVER_IPW2100=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5 (automatically included if EAP-TTLS is enabled)
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Replace native Linux implementation of packet sockets with libdnet/libpcap.
-# This will be automatically set for non-Linux OS.
-#CONFIG_DNET_PCAP=y
-
-# Include control interface for external programs, e.g, wpa_cli
-CONFIG_CTRL_IFACE=y
-
-# Include interface for using external supplicant (Xsupplicant) for EAP
-# authentication
-#CONFIG_XSUPPLICANT_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
diff --git a/meta/packages/wpa-supplicant/files/defconfig-gnutls b/meta/packages/wpa-supplicant/files/defconfig-gnutls
deleted file mode 100644
index 5b4ff0d03..000000000
--- a/meta/packages/wpa-supplicant/files/defconfig-gnutls
+++ /dev/null
@@ -1,178 +0,0 @@
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD
-LIBS = $(TARGET_LDFLAGS)
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=n
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for Broadcom driver
-#CONFIG_DRIVER_BROADCOM=y
-
-# Driver interface for Intel ipw2100 driver
-#CONFIG_DRIVER_IPW2100=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5 (automatically included if EAP-TTLS is enabled)
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled)
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Replace native Linux implementation of packet sockets with libdnet/libpcap.
-# This will be automatically set for non-Linux OS.
-#CONFIG_DNET_PCAP=y
-
-# Include control interface for external programs, e.g, wpa_cli
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-#CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
-#CONFIG_STAKEY=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# none = Empty template
-CONFIG_TLS=gnutls
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-CONFIG_GNUTLS_EXTRA=y
-
-# Add support for DBus control interface
-CONFIG_CTRL_IFACE_DBUS=y
diff --git a/meta/packages/wpa-supplicant/files/init.sh b/meta/packages/wpa-supplicant/files/init.sh
deleted file mode 100755
index bc7ee9184..000000000
--- a/meta/packages/wpa-supplicant/files/init.sh
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-DAEMON=/usr/sbin/wpa_supplicant
-CONFIG="/etc/wpa_supplicant.conf"
-PNAME="wpa_supplicant"
-
-# insane defaults
-OPTIONS=""
-
-test -f /etc/default/wpa && . /etc/default/wpa
-
-if [ ! -f $CONFIG ]; then
-	echo "No configuration file found, not starting."
-	exit 1
-fi
-
-test -f $DAEMON || exit 0
-
-case "$1" in
-	start)
-		echo -n "Starting wpa_supplicant: "
-		start-stop-daemon -S -b -x $DAEMON -- -Bw -c $CONFIG $OPTIONS >/dev/null
-		echo "done."
-		;;
-	stop)
-		echo -n "Stopping wpa_supplicant: "
-		start-stop-daemon -K -n $PNAME >/dev/null
-		echo "done."
-		;;
-	reload|force-reload)
-		echo -n "Reloading wpa_supplicant: "
-		killall -HUP $PNAME
-		echo "done."
-		;;
-	restart)
-		echo -n "Restarting wpa_supplicant: "
-		start-stop-daemon -K -n $PNAME >/dev/null
-		sleep 1
-		start-stop-daemon -S -b -x $DAEMON -- -Bw -c $CONFIG $OPTIONS >/dev/null
-		echo "done."
-		;;
-	*)
-		echo "Usage: $0 {start|stop|restart|reload|force-reload}" >&2
-		exit 1
-		;;
-esac
-
-exit 0
diff --git a/meta/packages/wpa-supplicant/files/wpa-supplicant.sh b/meta/packages/wpa-supplicant/files/wpa-supplicant.sh
deleted file mode 100644
index 5c9e5d33a..000000000
--- a/meta/packages/wpa-supplicant/files/wpa-supplicant.sh
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/sh
-
-
-WPA_SUP_BIN="/usr/sbin/wpa_supplicant"
-WPA_SUP_PNAME="wpa_supplicant"
-WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid"
-WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE"
-
-VERBOSITY=0
-
-
-if [ -s "$IF_WPA_CONF" ]; then
-	WPA_SUP_CONF="-c $IF_WPA_CONF"
-else
-	exit 0
-fi
-
-if [ ! -x "$WPA_SUP_BIN" ]; then
-	
-	if [ "$VERBOSITY" = "1" ]; then
-		echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN"
-	fi
-	
-	exit 1
-fi
-
-if [ "$MODE" = "start" ] ; then
-	# driver type of interface, defaults to wext when undefined
-	if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then
-		IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE")
-	elif [ -z "$IF_WPA_DRIVER" ]; then
-		
-		if [ "$VERBOSITY" = "1" ]; then
-			echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\""
-		fi
-		
-		IF_WPA_DRIVER="wext"
-	fi
-	
-	# if we have passed the criteria, start wpa_supplicant
-	if [ -n "$WPA_SUP_CONF" ]; then
-		
-		if [ "$VERBOSITY" = "1" ]; then
-			echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER"
-		fi
-		
-		start-stop-daemon --start --quiet \
-			--name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \
-			--  $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER
-	fi
-
-	# if the interface socket exists, then wpa_supplicant was invoked successfully
-	if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
-	
-		if [ "$VERBOSITY" = "1" ]; then
-			echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE"
-		fi
-
-		exit 0
-		
-	fi
-	
-elif [ "$MODE" = "stop" ]; then
-
-	if [ -f "$WPA_SUP_PIDFILE" ]; then
-		
-		if [ "$VERBOSITY" = "1" ]; then
-			echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon"
-		fi
-		
-		start-stop-daemon --stop --quiet \
-			--name $WPA_SUP_PNAME --pidfile	$WPA_SUP_PIDFILE
-			
-		if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
-			rm -f $WPA_COMMON_CTRL_IFACE/$IFACE
-		fi
-			
-		if [ -f "$WPA_SUP_PIDFILE" ]; then
-			rm -f $WPA_SUP_PIDFILE
-		fi
-	fi
-
-fi
-
-exit 0
diff --git a/meta/packages/wpa-supplicant/files/wpa_supplicant-0.5.7-always-scan.patch b/meta/packages/wpa-supplicant/files/wpa_supplicant-0.5.7-always-scan.patch
deleted file mode 100644
index 25afd07a1..000000000
--- a/meta/packages/wpa-supplicant/files/wpa_supplicant-0.5.7-always-scan.patch
+++ /dev/null
@@ -1,12 +0,0 @@
-diff -up wpa_supplicant-0.5.7/wpa_supplicant.c.always-scan wpa_supplicant-0.5.7/wpa_supplicant.c
---- wpa_supplicant-0.5.7/wpa_supplicant.c.always-scan	2007-09-25 15:51:35.000000000 -0400
-+++ wpa_supplicant-0.5.7/wpa_supplicant.c	2007-09-25 16:31:27.000000000 -0400
-@@ -972,7 +972,7 @@ static void wpa_supplicant_scan(void *el
- 	struct wpa_ssid *ssid;
- 	int enabled, scan_req = 0, ret;
- 
--	if (wpa_s->disconnected)
-+	if (wpa_s->disconnected && !wpa_s->scan_req)
- 		return;
- 
- 	enabled = 0;
diff --git a/meta/packages/wpa-supplicant/files/wpa_supplicant-fix-deprecated-dbus-function.patch b/meta/packages/wpa-supplicant/files/wpa_supplicant-fix-deprecated-dbus-function.patch
deleted file mode 100644
index dbd5e4e93..000000000
--- a/meta/packages/wpa-supplicant/files/wpa_supplicant-fix-deprecated-dbus-function.patch
+++ /dev/null
@@ -1,187 +0,0 @@
---- dbus_dict_helpers.c.array-fix	2006-12-18 12:31:11.000000000 -0500
-+++ dbus_dict_helpers.c	2006-12-20 03:17:08.000000000 -0500
-@@ -629,36 +629,55 @@ dbus_bool_t wpa_dbus_dict_open_read(DBus
- }
- 
- 
-+#define BYTE_ARRAY_CHUNK_SIZE 34
-+#define BYTE_ARRAY_ITEM_SIZE (sizeof (char))
-+
- static dbus_bool_t _wpa_dbus_dict_entry_get_byte_array(
--	DBusMessageIter *iter, int array_len, int array_type,
-+	DBusMessageIter *iter, int array_type,
- 	struct wpa_dbus_dict_entry *entry)
- {
--	dbus_uint32_t i = 0;
-+	dbus_uint32_t count = 0;
- 	dbus_bool_t success = FALSE;
--	char byte;
-+	char * buffer;
- 
--	/* Zero-length arrays are valid. */
--	if (array_len == 0) {
--		entry->bytearray_value = NULL;
--		entry->array_type = DBUS_TYPE_BYTE;
--		success = TRUE;
--		goto done;
--	}
-+	entry->bytearray_value = NULL;
-+	entry->array_type = DBUS_TYPE_BYTE;
- 
--	entry->bytearray_value = wpa_zalloc(array_len * sizeof(char));
--	if (!entry->bytearray_value) {
-+	buffer = wpa_zalloc(BYTE_ARRAY_ITEM_SIZE * BYTE_ARRAY_CHUNK_SIZE);
-+	if (!buffer) {
- 		perror("_wpa_dbus_dict_entry_get_byte_array[dbus]: out of "
- 		       "memory");
- 		goto done;
- 	}
- 
--	entry->array_type = DBUS_TYPE_BYTE;
--	entry->array_len = array_len;
-+	entry->bytearray_value = buffer;
-+	entry->array_len = 0;
- 	while (dbus_message_iter_get_arg_type(iter) == DBUS_TYPE_BYTE) {
-+		char byte;
-+
-+		if ((count % BYTE_ARRAY_CHUNK_SIZE) == 0 && count != 0) {
-+			buffer = realloc(buffer, BYTE_ARRAY_ITEM_SIZE * (count + BYTE_ARRAY_CHUNK_SIZE));
-+			if (buffer == NULL) {
-+				perror("_wpa_dbus_dict_entry_get_byte_array["
-+				       "dbus] out of memory trying to "
-+				       "retrieve the string array");
-+				goto done;
-+			}
-+		}
-+		entry->bytearray_value = buffer;
-+
- 		dbus_message_iter_get_basic(iter, &byte);
--		entry->bytearray_value[i++] = byte;
-+		entry->bytearray_value[count] = byte;
-+		entry->array_len = ++count;
- 		dbus_message_iter_next(iter);
- 	}
-+
-+	/* Zero-length arrays are valid. */
-+	if (entry->array_len == 0) {
-+		free(entry->bytearray_value);
-+		entry->strarray_value = NULL;
-+	}
-+
- 	success = TRUE;
- 
- done:
-@@ -666,8 +685,11 @@ done:
- }
- 
- 
-+#define STR_ARRAY_CHUNK_SIZE 8
-+#define STR_ARRAY_ITEM_SIZE (sizeof (char *))
-+
- static dbus_bool_t _wpa_dbus_dict_entry_get_string_array(
--	DBusMessageIter *iter, int array_len, int array_type,
-+	DBusMessageIter *iter, int array_type,
- 	struct wpa_dbus_dict_entry *entry)
- {
- 	dbus_uint32_t count = 0;
-@@ -677,13 +699,7 @@ static dbus_bool_t _wpa_dbus_dict_entry_
- 	entry->strarray_value = NULL;
- 	entry->array_type = DBUS_TYPE_STRING;
- 
--	/* Zero-length arrays are valid. */
--	if (array_len == 0) {
--		success = TRUE;
--		goto done;
--	}
--
--	buffer = wpa_zalloc(sizeof (char *) * 8);
-+	buffer = wpa_zalloc(STR_ARRAY_ITEM_SIZE * STR_ARRAY_CHUNK_SIZE);
- 	if (buffer == NULL) {
- 		perror("_wpa_dbus_dict_entry_get_string_array[dbus] out of "
- 		       "memory trying to retrieve a string array");
-@@ -696,18 +712,14 @@ static dbus_bool_t _wpa_dbus_dict_entry_
- 		const char *value;
- 		char *str;
- 
--		if ((count % 8) == 0 && count != 0) {
--			char **tmp;
--			tmp = realloc(buffer, sizeof(char *) * (count + 8));
--			if (tmp == NULL) {
-+		if ((count % STR_ARRAY_CHUNK_SIZE) == 0 && count != 0) {
-+			buffer = realloc(buffer, STR_ARRAY_ITEM_SIZE * (count + STR_ARRAY_CHUNK_SIZE));
-+			if (buffer == NULL) {
- 				perror("_wpa_dbus_dict_entry_get_string_array["
- 				       "dbus] out of memory trying to "
- 				       "retrieve the string array");
--				free(buffer);
--				buffer = NULL;
- 				goto done;
- 			}
--			buffer = tmp;
- 		}
- 		entry->strarray_value = buffer;
- 
-@@ -723,6 +735,13 @@ static dbus_bool_t _wpa_dbus_dict_entry_
- 		entry->array_len = ++count;
- 		dbus_message_iter_next(iter);
- 	}
-+
-+	/* Zero-length arrays are valid. */
-+	if (entry->array_len == 0) {
-+		free(entry->strarray_value);
-+		entry->strarray_value = NULL;
-+	}
-+
- 	success = TRUE;
- 
- done:
-@@ -734,7 +753,6 @@ static dbus_bool_t _wpa_dbus_dict_entry_
- 	DBusMessageIter *iter_dict_val, struct wpa_dbus_dict_entry *entry)
- {
- 	int array_type = dbus_message_iter_get_element_type(iter_dict_val);
--	int array_len;
- 	dbus_bool_t success = FALSE;
- 	DBusMessageIter iter_array;
- 
-@@ -743,20 +761,14 @@ static dbus_bool_t _wpa_dbus_dict_entry_
- 
- 	dbus_message_iter_recurse(iter_dict_val, &iter_array);
- 
-- 	array_len = dbus_message_iter_get_array_len(&iter_array);
--	if (array_len < 0)
--		return FALSE;
--
-  	switch (array_type) {
- 	case DBUS_TYPE_BYTE:
- 		success = _wpa_dbus_dict_entry_get_byte_array(&iter_array,
--							      array_len,
- 							      array_type,
- 							      entry);
- 		break;
- 	case DBUS_TYPE_STRING:
- 		success = _wpa_dbus_dict_entry_get_string_array(&iter_array,
--								array_len,
- 								array_type,
- 								entry);
- 		break;
-@@ -943,9 +955,17 @@ void wpa_dbus_dict_entry_clear(struct wp
- 		break;
- 	case DBUS_TYPE_ARRAY:
- 		switch (entry->array_type) {
--		case DBUS_TYPE_BYTE:
--			free(entry->bytearray_value);
--			break;
-+		case DBUS_TYPE_BYTE: {
-+				free(entry->bytearray_value);
-+				break;
-+			}
-+		case DBUS_TYPE_STRING: {
-+				int i;
-+				for (i = 0; i < entry->array_len; i++)
-+					free (entry->strarray_value[i]);
-+				free (entry->strarray_value);
-+				break;
-+			}
- 		}
- 		break;
- 	}
diff --git a/meta/packages/wpa-supplicant/files/wpa_supplicant.conf b/meta/packages/wpa-supplicant/files/wpa_supplicant.conf
deleted file mode 100644
index f0c993d19..000000000
--- a/meta/packages/wpa-supplicant/files/wpa_supplicant.conf
+++ /dev/null
@@ -1,690 +0,0 @@
-##### Example wpa_supplicant configuration file ###############################
-#
-# This file describes configuration file format and lists all available option.
-# Please also take a look at simpler configuration examples in 'examples'
-# subdirectory.
-#
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# Note: All file paths in this configuration file should use full (absolute,
-# not relative to working directory) path in order to allow working directory
-# to be changed. This can happen if wpa_supplicant is run in the background.
-
-# Whether to allow wpa_supplicant to update (overwrite) configuration
-#
-# This option can be used to allow wpa_supplicant to overwrite configuration
-# file whenever configuration is changed (e.g., new network block is added with
-# wpa_cli or wpa_gui, or a password is changed). This is required for
-# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
-# Please note that overwriting configuration file will remove the comments from
-# it.
-#update_config=1
-
-# global configuration (shared by all network blocks)
-#
-# Parameters for the control interface. If this is specified, wpa_supplicant
-# will open a control interface that is available for external programs to
-# manage wpa_supplicant. The meaning of this string depends on which control
-# interface mechanism is used. For all cases, the existance of this parameter
-# in configuration is used to determine whether the control interface is
-# enabled.
-#
-# For UNIX domain sockets (default on Linux and BSD): This is a directory that
-# will be created for UNIX domain sockets for listening to requests from
-# external programs (CLI/GUI, etc.) for status information and configuration.
-# The socket file will be named based on the interface name, so multiple
-# wpa_supplicant processes can be run at the same time if more than one
-# interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-#
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# When configuring both the directory and group, use following format:
-# DIR=/var/run/wpa_supplicant GROUP=wheel
-# DIR=/var/run/wpa_supplicant GROUP=0
-# (group can be either group name or gid)
-#
-# For UDP connections (default on Windows): The value will be ignored. This
-# variable is just used to select that the control interface is to be created.
-# The value can be set to, e.g., udp (ctrl_interface=udp)
-#
-# For Windows Named Pipe: This value can be used to set the security descriptor
-# for controlling access to the control interface. Security descriptor can be
-# set using Security Descriptor String Format (see http://msdn.microsoft.com/
-# library/default.asp?url=/library/en-us/secauthz/security/
-# security_descriptor_string_format.asp). The descriptor string needs to be
-# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
-# DACL (which will reject all connections). See README-Windows.txt for more
-# information about SDDL string format.
-#
-ctrl_interface=/var/run/wpa_supplicant
-
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-#    parameters (e.g., WPA IE generation); this mode can also be used with
-#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-#    APs (i.e., external program needs to control association). This mode must
-#    also be used when using wired Ethernet drivers.
-# 2: like 0, but associate with APs using security policy and SSID (but not
-#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
-#    enable operation with hidden SSIDs and optimized roaming; in this mode,
-#    the network blocks in the configuration file are tried one by one until
-#    the driver reports successful association; each network block should have
-#    explicit security policy (i.e., only one option in the lists) for
-#    key_mgmt, pairwise, group, proto variables
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-# OpenSSL Engine support
-# These options can be used to load OpenSSL engines.
-# The two engines that are supported currently are shown below:
-# They are both from the opensc project (http://www.opensc.org/)
-# By default no engines are loaded.
-# make the opensc engine available
-#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
-# make the pkcs11 engine available
-#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
-# configure the path to the pkcs11 module required by the pkcs11 engine
-#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
-
-# Dynamic EAP methods
-# If EAP methods were built dynamically as shared object files, they need to be
-# loaded here before being used in the network blocks. By default, EAP methods
-# are included statically in the build, so these lines are not needed
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
-#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
-
-# Driver interface parameters
-# This field can be used to configure arbitrary driver interace parameters. The
-# format is specific to the selected driver interface. This field is not used
-# in most cases.
-#driver_param="field=value"
-
-# Maximum lifetime for PMKSA in seconds; default 43200
-#dot11RSNAConfigPMKLifetime=43200
-# Threshold for reauthentication (percentage of PMK lifetime); default 70
-#dot11RSNAConfigPMKReauthThreshold=70
-# Timeout for security association negotiation in seconds; default 60
-#dot11RSNAConfigSATimeout=60
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# disabled:
-#	0 = this network can be used (default)
-#	1 = this network block is disabled (can be enabled through ctrl_iface,
-#	    e.g., with wpa_cli or wpa_gui)
-#
-# id_str: Network identifier string for external scripts. This value is passed
-#	to external action script through wpa_cli as WPA_ID_STR environment
-#	variable to make it easier to do network specific configuration.
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-#	as hex string; network name
-#
-# scan_ssid:
-#	0 = do not scan this SSID with specific Probe Request frames (default)
-#	1 = scan with SSID-specific Probe Request frames (this can be used to
-#	    find APs that do not accept broadcast SSID or use multiple SSIDs;
-#	    this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-#	associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
-# using this priority to select the order for scanning. Instead, they try the
-# networks in the order that used in the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
-# to be set to 2 for IBSS. WPA-None requires following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication (this can use an external
-#	program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-#	generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-#	pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key required for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# 	(3 = require both keys; default)
-# Note: When using wired authentication, eapol_flags must be set to 0 for the
-# authentication to be completed successfully.
-#
-# proactive_key_caching:
-# Enable/disable opportunistic PMKSA caching for WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#
-# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
-# hex without quotation, e.g., 0102030405)
-# wep_tx_keyidx: Default WEP key index (TX) (0..3)
-#
-# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
-# allowed. This is only used with RSN/WPA2.
-# 0 = disabled (default)
-# 1 = enabled
-#peerkey=1
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-#	MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-#			cannot be used with WPA; to be used as a Phase 2 method
-#			with EAP-PEAP or EAP-TTLS)
-#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       OTP = EAP-OTP (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#       GTC = EAP-GTC (cannot be used separately with WPA; to be used
-#		as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-#	TLS = EAP-TLS (client and server certificate)
-#	PEAP = EAP-PEAP (with tunnelled EAP authentication)
-#	TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-#			 authentication)
-#	If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-#	unencrypted identity with EAP types that support different tunnelled
-#	identity, e.g., EAP-TTLS)
-# password: Password string for EAP
-# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
-#	or more trusted CA certificates. If ca_cert and ca_path are not
-#	included, server certificate will not be verified. This is insecure and
-#	a trusted CA certificate should always be configured when using
-#	EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
-#	change when wpa_supplicant is run in the background.
-#	On Windows, trusted CA certificates can be loaded from the system
-#	certificate store by setting this to cert_store://<name>, e.g.,
-#	ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
-#	Note that when running wpa_supplicant as an application, the user
-#	certificate store (My user account) is used, whereas computer store
-#	(Computer account) is used when running wpasvc as a service.
-# ca_path: Directory path for CA certificate files (PEM). This path may
-#	contain multiple CA certificates in OpenSSL format. Common use for this
-#	is to point to system trusted CA list which is often installed into
-#	directory like /etc/ssl/certs. If configured, these certificates are
-#	added to the list of trusted CAs. ca_cert may also be included in that
-#	case, but it is not required.
-# client_cert: File path to client certificate file (PEM/DER)
-#	Full path should be used since working directory may change when
-#	wpa_supplicant is run in the background.
-#	Alternatively, a named configuration blob can be used by setting this
-#	to blob://<blob name>.
-# private_key: File path to client private key file (PEM/DER/PFX)
-#	When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-#	commented out. Both the private key and certificate will be read from
-#	the PKCS#12 file in this case. Full path should be used since working
-#	directory may change when wpa_supplicant is run in the background.
-#	Windows certificate store can be used by leaving client_cert out and
-#	configuring private_key in one of the following formats:
-#	cert://substring_to_match
-#	hash://certificate_thumbprint_in_hex
-#	for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
-#	Note that when running wpa_supplicant as an application, the user
-#	certificate store (My user account) is used, whereas computer store
-#	(Computer account) is used when running wpasvc as a service.
-#	Alternatively, a named configuration blob can be used by setting this
-#	to blob://<blob name>.
-# private_key_passwd: Password for private key file (if left out, this will be
-#	asked through control interface)
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-#	This is an optional configuration file for setting parameters for an
-#	ephemeral DH key exchange. In most cases, the default RSA
-#	authentication does not use this configuration. However, it is possible
-#	setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-#	DSA keys always use ephemeral DH keys. This can be used to achieve
-#	forward secrecy. If the file is in DSA parameters format, it will be
-#	automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-#	authentication server certificate. If this string is set, the server
-#	sertificate is only accepted if it contains this string in the subject.
-#	The subject string is in following format:
-#	/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# altsubject_match: Semicolon separated string of entries to be matched against
-#	the alternative subject name of the authentication server certificate.
-#	If this string is set, the server sertificate is only accepted if it
-#	contains one of the entries in an alternative subject name extension.
-#	altSubjectName string is in following format: TYPE:VALUE
-#	Example: EMAIL:server@example.com
-#	Example: DNS:server.example.com;DNS:server2.example.com
-#	Following types are supported: EMAIL, DNS, URI
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "peapver=0" or
-#	"peapver=1 peaplabel=1")
-#	'peapver' can be used to force which PEAP version (0 or 1) is used.
-#	'peaplabel=1' can be used to force new label, "client PEAP encryption",
-#	to be used during key derivation when PEAPv1 or newer. Most existing
-#	PEAPv1 implementation seem to be using the old label, "client EAP
-#	encryption", and wpa_supplicant is now using that as the default value.
-#	Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-#	interoperate with PEAPv1; see eap_testing.txt for more details.
-#	'peap_outer_success=0' can be used to terminate PEAP authentication on
-#	tunneled EAP-Success. This is required with some RADIUS servers that
-#	implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-#	Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-#	include_tls_length=1 can be used to force wpa_supplicant to include
-#	TLS Message Length field in all TLS messages even if they are not
-#	fragmented.
-#	sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-#	challenges (by default, it accepts 2 or 3)
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-#	(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-#	"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-#	trusted CA certificates. If ca_cert2 and ca_path2 are not included,
-#	server certificate will not be verified. This is insecure and a trusted
-#	CA certificate should always be configured.
-# ca_path2: Directory path for CA certificate files (PEM)
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-#	authentication server certificate.
-# altsubject_match2: Substring to be matched against the alternative subject
-#	name of the authentication server certificate.
-#
-# fragment_size: Maximum EAP fragment size in bytes (default 1398).
-#	This value limits the fragment size for EAP methods that support
-#	fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
-#	small enough to make the EAP messages fit in MTU of the network
-#	interface used for EAPOL. The default value is suitable for most
-#	cases.
-#
-# EAP-PSK variables:
-# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
-# nai: user NAI
-#
-# EAP-PAX variables:
-# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
-#
-# EAP-SAKE variables:
-# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format
-#	(this is concatenation of Root-Secret-A and Root-Secret-B)
-# nai: user NAI (PEERID)
-#
-# EAP-GPSK variables:
-# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits)
-# nai: user NAI (ID_Client)
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-#	to create this file and write updates to it when PAC is being
-#	provisioned or refreshed. Full path to the file should be used since
-#	working directory may change when wpa_supplicant is run in the
-#	background. Alternatively, a named configuration blob can be used by
-#	setting this to blob://<blob name>
-# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
-#	credentials (PAC)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-network={
-	ssid="simple"
-	psk="very secret passphrase"
-	priority=5
-}
-
-# Same as previous, but request SSID-specific scanning (for APs that reject
-# broadcast SSID)
-network={
-	ssid="second ssid"
-	scan_ssid=1
-	psk="very secret passphrase"
-	priority=2
-}
-
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
-	ssid="example"
-	proto=WPA
-	key_mgmt=WPA-PSK
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-	priority=2
-}
-
-# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-# or WEP40 as the group cipher will not be accepted.
-network={
-	ssid="example"
-	proto=RSN
-	key_mgmt=WPA-EAP
-	pairwise=CCMP TKIP
-	group=CCMP TKIP
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	priority=1
-}
-
-# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-# (e.g., Radiator)
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=PEAP
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase1="peaplabel=1"
-	phase2="auth=MSCHAPV2"
-	priority=10
-}
-
-# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	priority=2
-}
-
-# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-# use. Real identity is sent only within an encrypted TLS tunnel.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	phase2="auth=MSCHAPV2"
-}
-
-# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-# authentication.
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	# Phase1 / outer authentication
-	anonymous_identity="anonymous@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	# Phase 2 / inner authentication
-	phase2="autheap=TLS"
-	ca_cert2="/etc/cert/ca2.pem"
-	client_cert2="/etc/cer/user.pem"
-	private_key2="/etc/cer/user.prv"
-	private_key2_passwd="password"
-	priority=2
-}
-
-# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-# group cipher.
-network={
-	ssid="example"
-	bssid=00:11:22:33:44:55
-	proto=WPA RSN
-	key_mgmt=WPA-PSK WPA-EAP
-	pairwise=CCMP
-	group=CCMP
-	psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-}
-
-# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-# and all valid ciphers.
-network={
-	ssid=00010203
-	psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-}
-
-
-# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-# EAP-TLS for authentication and key generation; require both unicast and
-# broadcast WEP keys.
-network={
-	ssid="1x-test"
-	key_mgmt=IEEE8021X
-	eap=TLS
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	eapol_flags=3
-}
-
-
-# LEAP with dynamic WEP keys
-network={
-	ssid="leap-example"
-	key_mgmt=IEEE8021X
-	eap=LEAP
-	identity="user"
-	password="foobar"
-}
-
-# Plaintext connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="plaintext-test"
-	key_mgmt=NONE
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
-	ssid="static-wep-test"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-# IEEE 802.11 authentication
-network={
-	ssid="static-wep-test2"
-	key_mgmt=NONE
-	wep_key0="abcde"
-	wep_key1=0102030405
-	wep_key2="1234567890123"
-	wep_tx_keyidx=0
-	priority=5
-	auth_alg=SHARED
-}
-
-
-# IBSS/ad-hoc network with WPA-None/TKIP.
-network={
-	ssid="test adhoc"
-	mode=1
-	proto=WPA
-	key_mgmt=WPA-NONE
-	pairwise=NONE
-	group=TKIP
-	psk="secret passphrase"
-}
-
-
-# Catch all example that allows more or less all configuration modes
-network={
-	ssid="example"
-	scan_ssid=1
-	key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
-	pairwise=CCMP TKIP
-	group=CCMP TKIP WEP104 WEP40
-	psk="very secret passphrase"
-	eap=TTLS PEAP TLS
-	identity="user@example.com"
-	password="foobar"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-	private_key="/etc/cert/user.prv"
-	private_key_passwd="password"
-	phase1="peaplabel=0"
-}
-
-# Example of EAP-TLS with smartcard (openssl engine)
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TLS
-	proto=RSN
-	pairwise=CCMP TKIP
-	group=CCMP TKIP
-	identity="user@example.com"
-	ca_cert="/etc/cert/ca.pem"
-	client_cert="/etc/cert/user.pem"
-
-	engine=1
-
-	# The engine configured here must be available. Look at
-	# OpenSSL engine support in the global section.
-	# The key available through the engine must be the private key
-	# matching the client certificate configured above.
-
-	# use the opensc engine
-	#engine_id="opensc"
-	#key_id="45"
-
-	# use the pkcs11 engine
-	engine_id="pkcs11"
-	key_id="id_45"
-
-	# Optional PIN configuration; this can be left out and PIN will be
-	# asked through the control interface
-	pin="1234"
-}
-
-# Example configuration showing how to use an inlined blob as a CA certificate
-# data instead of using external file
-network={
-	ssid="example"
-	key_mgmt=WPA-EAP
-	eap=TTLS
-	identity="user@example.com"
-	anonymous_identity="anonymous@example.com"
-	password="foobar"
-	ca_cert="blob://exampleblob"
-	priority=20
-}
-
-blob-base64-exampleblob={
-SGVsbG8gV29ybGQhCg==
-}
-
-
-# Wildcard match for SSID (plaintext APs only). This example select any
-# open AP regardless of its SSID.
-network={
-	key_mgmt=NONE
-}
diff --git a/meta/packages/wpa-supplicant/files/wpa_supplicant.conf-sane b/meta/packages/wpa-supplicant/files/wpa_supplicant.conf-sane
deleted file mode 100644
index c91ffe0c8..000000000
--- a/meta/packages/wpa-supplicant/files/wpa_supplicant.conf-sane
+++ /dev/null
@@ -1,7 +0,0 @@
-ctrl_interface=/var/run/wpa_supplicant
-ctrl_interface_group=0
-update_config=1
-
-network={
-        key_mgmt=NONE
-}
diff --git a/meta/packages/wpa-supplicant/files/wpa_supplicant_default.conf b/meta/packages/wpa-supplicant/files/wpa_supplicant_default.conf
deleted file mode 100644
index 8eebdeb5c..000000000
--- a/meta/packages/wpa-supplicant/files/wpa_supplicant_default.conf
+++ /dev/null
@@ -1,13 +0,0 @@
-# This is a basic configuration for WPA with pre-shared keys (WPA-PSK)
-
-ctrl_interface=/var/run/wpa_supplicant
-ctrl_interface_group=0
-eapol_version=1
-ap_scan=1
-network={
-	ssid="YOUR_SSID"
-	psk="YOUR WPA PASSWORD IN HEX OR ASCII"
-	key_mgmt=WPA-PSK
-	pairwise=CCMP
-	priority=5
-}