conf/machine: Drop older machines with no recent updates

These are all moving to meta-extras. Ideally in the future machines
such as these will be maintained to topic specific layers as we move
to a more layer oriented model. If this causes a problem for anyone
please discuss it on the mailing list.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

1 files changed, 0 insertions, 217 deletions

diff --git a/meta/recipes-kernel/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch b/meta/recipes-kernel/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch
deleted file mode 100644
index e1e216c91..000000000
--- a/meta/recipes-kernel/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 51f967864f0e30225c8a8e50e0bbaf92258c0032 Mon Sep 17 00:00:00 2001
-From: Vikram Pandita <vikram.pandita@ti.com>
-Date: Thu, 20 Aug 2009 16:13:20 -0500
-Subject: [PATCH 1/5] OMAP1/2/3/4: DEBUG_LL: cleanup
-
-This patch cleans up the DEBUG_LL infrastructure for omap boards.
-
-The three stages of log printing infrastructure is using their own #defines
-The patch integrates the three stages to use the same variable.
-
-Three stages are:
-Stage 1: Prints - Uncompressing Linux......
-	File getting used: arch/arm/plat-omap/include/mach/uncompress.h
-Stage 2: Prints - <5>Linux version 2.6.31
-	File getting used: arch/arm/plat-omap/include/mach/debug-macro.S
-Stage 3: Kernel ttyS console takes over
-
-On enabling the DEBUG_LL menuconfig item
-[Kernel Hacking -> Kernel low-level debugging functions]
-
-the following entry gets auto selected
-[Systerm Type -> TI OMAP Implementations -> Low-level Debug console UART]
-
-This is the physical address of the UART getting used for the board.
-The physical address of debug uart is provided as a menuconfig option now.
-
-Issue with current system:
-(a) Zoom2 board has a detachable debug board having the TL16CP754 Quad uart chip.
-If the debug board is not attached, _NO_ debug uart is available.
-OMAP internal uarts are not used for traces on zoom2 board.
-Current framework does not account for boards that may not have a debug uart
-at all. The Stage 1 always accesses one of the uarts. Thats fixed now.
-
-(b) this patch does a cleanup of arch/arm/plat-omap/include/mach/debug-macro.S
-
-Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
----
- arch/arm/plat-omap/Kconfig                    |   50 ++++++++++++++++++-------
- arch/arm/plat-omap/include/mach/common.h      |    7 +++
- arch/arm/plat-omap/include/mach/debug-macro.S |   40 ++++----------------
- arch/arm/plat-omap/include/mach/uncompress.h  |   12 +----
- 4 files changed, 54 insertions(+), 55 deletions(-)
-
-diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
-index ab9f9ef..2fefb64 100644
---- a/arch/arm/plat-omap/Kconfig
-+++ b/arch/arm/plat-omap/Kconfig
-@@ -162,21 +162,43 @@ config OMAP_DM_TIMER
- 	help
- 	 Select this option if you want to use OMAP Dual-Mode timers.
- 
--choice
--	prompt "Low-level debug console UART"
--	depends on ARCH_OMAP
--	default OMAP_LL_DEBUG_UART1
--
--config OMAP_LL_DEBUG_UART1
--	bool "UART1"
--
--config OMAP_LL_DEBUG_UART2
--	bool "UART2"
- 
--config OMAP_LL_DEBUG_UART3
--	bool "UART3"
--
--endchoice
-+config OMAP_DEBUG_LL_UART_PHY_ADDR
-+	hex "Low-level debug console UART Physical Address"
-+	depends on ARCH_OMAP && DEBUG_LL
-+
-+	default "0xfffb0800" if ARCH_OMAP1 && (MACH_OMAP_PALMTT || MACH_SX1)
-+	default "0xfffb0000" if ARCH_OMAP1
-+	default "0x4806e000" if ARCH_OMAP2 && MACH_NOKIA_N8X0
-+	default "0x4806a000" if ARCH_OMAP2
-+	default "0x49020000" if ARCH_OMAP3 && (MACH_NOKIA_RX51 || MACH_OMAP_BEAGLE)
-+	default "0x49020000" if ARCH_OMAP3 && (MACH_OMAP3_PANDORA || MACH_OMAP_LDP || MACH_OVERO)
-+	default "0x10000000" if ARCH_OMAP3 && MACH_OMAP_ZOOM2
-+	default "0x4806a000" if ARCH_OMAP3
-+	default "0x4806a000" if ARCH_OMAP4
-+	help
-+	  Specify the Physical address of Low level debug UART
-+	  Specify 0x0 in case you do not want DEBUG_LL functions to iterfere with your board uarts
-+
-+	  OMAP1:
-+	  -------------------
-+	  UART1 -> 0xfffb0000 (default)
-+	  UART2 -> 0xfffb0800
-+	  UART3 -> 0xfffb9800 (sx1, palmtt)
-+
-+	  OMAP2:
-+	  -------------------
-+	  UART1 -> 0x4806a000 (default)
-+	  UART2 -> 0x4806c000
-+	  UART3 -> 0x4806e000 (N8X0)
-+
-+	  OMAP3/4:
-+	  -------------------
-+	  UART1		-> 0x4806a000 (default: except following)
-+	  UART2		-> 0x4806c000
-+	  UART3		-> 0x49020000 (rx51, beagle, pendora, ldp, overo)
-+	  UART4		-> 0x4806e000
-+	  UART_EXT 	-> 0x10000000 (zoom2: Debug uart is on external debug board)
- 
- config OMAP_SERIAL_WAKE
- 	bool "Enable wake-up events for serial ports"
-diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
-index fdeab42..f29d31f 100644
---- a/arch/arm/plat-omap/include/mach/common.h
-+++ b/arch/arm/plat-omap/include/mach/common.h
-@@ -68,4 +68,11 @@ void omap2_set_globals_sdrc(struct omap_globals *);
- void omap2_set_globals_control(struct omap_globals *);
- void omap2_set_globals_prcm(struct omap_globals *);
- 
-+/* In case Low Level debug is not defined
-+ * make the low level uart address as zero
-+ */
-+#if !defined(CONFIG_DEBUG_LL)
-+#define CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR 0
-+#endif
-+
- #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
-diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
-index ac24050..f546d6c 100644
---- a/arch/arm/plat-omap/include/mach/debug-macro.S
-+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
-@@ -10,43 +10,19 @@
-  * published by the Free Software Foundation.
-  *
- */
-+#include "io.h"
- 
- 		.macro	addruart,rx
- 		mrc	p15, 0, \rx, c1, c0
- 		tst	\rx, #1			@ MMU enabled?
- #ifdef CONFIG_ARCH_OMAP1
--		moveq	\rx, #0xff000000	@ physical base address
--		movne	\rx, #0xfe000000	@ virtual base
--		orr	\rx, \rx, #0x00fb0000
--#ifdef CONFIG_OMAP_LL_DEBUG_UART3
--		orr	\rx, \rx, #0x00009000	@ UART 3
--#endif
--#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
--		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
--#endif
--
--#elif  CONFIG_ARCH_OMAP2
--		moveq	\rx, #0x48000000	@ physical base address
--		movne	\rx, #0xd8000000	@ virtual base
--		orr	\rx, \rx, #0x0006a000
--#ifdef CONFIG_OMAP_LL_DEBUG_UART2
--		add	\rx, \rx, #0x00002000	@ UART 2
--#endif
--#ifdef CONFIG_OMAP_LL_DEBUG_UART3
--		add	\rx, \rx, #0x00004000	@ UART 3
--#endif
--
--#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
--		moveq	\rx, #0x48000000	@ physical base address
--		movne	\rx, #0xd8000000	@ virtual base
--		orr	\rx, \rx, #0x0006a000
--#ifdef CONFIG_OMAP_LL_DEBUG_UART2
--		add	\rx, \rx, #0x00002000	@ UART 2
--#endif
--#ifdef CONFIG_OMAP_LL_DEBUG_UART3
--		add	\rx, \rx, #0x00fb0000	@ UART 3
--		add	\rx, \rx, #0x00006000
--#endif
-+					/* omap1 */
-+		ldr	\rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address
-+		subne	\rx, #CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, #OMAP1_IO_OFFSET @ virtual base
-+#else
-+					/* omap2/omap3/omap4 */
-+		ldr	\rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address
-+		orrne	\rx, \rx, #OMAP2_IO_OFFSET	 @ virtual base
- #endif
- 		.endm
- 
-diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
-index 0814c5f..0e21eb3 100644
---- a/arch/arm/plat-omap/include/mach/uncompress.h
-+++ b/arch/arm/plat-omap/include/mach/uncompress.h
-@@ -38,14 +38,8 @@ static void putc(int c)
- 	return;
- #endif
- 
--#ifdef CONFIG_ARCH_OMAP
--#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
--	uart = (volatile u8 *)(OMAP_UART3_BASE);
--#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
--	uart = (volatile u8 *)(OMAP_UART2_BASE);
--#else
--	uart = (volatile u8 *)(OMAP_UART1_BASE);
--#endif
-+#if defined(CONFIG_DEBUG_LL)
-+	uart = (volatile u8 *)(CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR);
- 
- #ifdef CONFIG_ARCH_OMAP1
- 	/* Determine which serial port to use */
-@@ -62,7 +56,6 @@ static void putc(int c)
- 		return;
- 	} while (0);
- #endif /* CONFIG_ARCH_OMAP1 */
--#endif
- 
- 	/*
- 	 * Now, xmit each character
-@@ -70,6 +63,7 @@ static void putc(int c)
- 	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
- 		barrier();
- 	uart[UART_TX << shift] = c;
-+#endif /* CONFIG_DEBUG_LL */
- }
- 
- static inline void flush(void)
--- 
-1.6.3.2
-