Add db 4.3.29

git-svn-id: https://svn.o-hand.com/repos/poky@236 311d38ba-8fff-0310-9ca6-ca027cbcb966

3 files changed, 148 insertions, 0 deletions

diff --git a/openembedded/packages/db/db-native_4.3.29.bb b/openembedded/packages/db/db-native_4.3.29.bb
new file mode 100644
index 000000000..5aaeb4329
--- /dev/null
+++ b/openembedded/packages/db/db-native_4.3.29.bb
@@ -0,0 +1,13 @@
+# This wrapper builds a native version of the SleepyCat
+# Berkeley DB for those packages which need it (e.g.
+# perl).
+SECTION = "libs"
+VIRTUAL_NAME = "virtual/db-native"
+CONFLICTS = "db3-native"
+#PR tracks the non-native package
+
+inherit native
+
+include db_${PV}.bb
+
+PACKAGES = ""
diff --git a/openembedded/packages/db/db_4.3.29.bb b/openembedded/packages/db/db_4.3.29.bb
new file mode 100644
index 000000000..206b7817a
--- /dev/null
+++ b/openembedded/packages/db/db_4.3.29.bb
@@ -0,0 +1,99 @@
+DEFAULT_PREFERENCE = "-1"
+
+# Version 4 of the Berkeley DB from Sleepycat
+#
+# At present this package only installs the DB code
+# itself (shared libraries, .a in the dev package),
+# documentation and headers.
+#
+# The headers have the same names as those as v3
+# of the DB, only one version can be used *for dev*
+# at once - DB3 and DB4 can both be installed on the
+# same system at the same time if really necessary.
+SECTION = "libs"
+DESCRIPTION = "Berkeley DB v4."
+HOMEPAGE = "http://www.sleepycat.com"
+LICENSE = "BSD Sleepycat"
+VIRTUAL_NAME ?= "virtual/db"
+CONFLICTS = "db3"
+PR = "r3"
+
+SRC_URI = "http://downloads.sleepycat.com/db-${PV}.tar.gz"
+#SRC_URI_MD5 = "http://downloads.sleepycat.com/db-${PV}.tar.gz.md5"
+SRC_URI += "file://arm-thumb-mutex.patch;patch=1"
+
+inherit autotools
+
+# Put virtual/db in any appropriate provider of a
+# relational database, use it as a dependency in
+# place of a specific db and use:
+#
+# PREFERRED_PROVIDER_virtual/db
+#
+# to select the correct db in the build (distro) .conf
+PROVIDES += "${VIRTUAL_NAME}"
+
+# bitbake isn't quite clever enough to deal with sleepycat,
+# the distribution sits in the expected directory, but all
+# the builds must occur from a sub-directory.  The following
+# persuades bitbake to go to the right place
+S = "${WORKDIR}/db-${PV}/dist"
+B = "${WORKDIR}/db-${PV}/build_unix"
+
+# The executables go in a separate package - typically there
+# is no need to install these unless doing real database
+# management on the system.
+PACKAGES += " ${PN}-bin"
+
+# Package contents
+FILES_${PN} = "${libdir}/libdb-4*so*"
+FILES_${PN}-bin = "${bindir}"
+# The dev package has the .so link (as in db3) and the .a's -
+# it is therefore incompatible (cannot be installed at the
+# same time) as the db3 package
+FILES_${PN}-dev = "${includedir} ${libdir}"
+
+#configuration - set in local.conf to override
+DB4_CONFIG ?= "--enable-o_direct --enable-smallbuild --enable-compat185"
+EXTRA_OECONF = "${DB4_CONFIG}"
+
+# Override the MUTEX setting here, the POSIX library is
+# the default - "POSIX/pthreads/library".
+# Don't ignore the nice SWP instruction on the ARM:
+# These enable the ARM assembler mutex code, this won't
+# work with thumb compilation...
+ARM_MUTEX = "--with-mutex=ARM/gcc-assembly"
+MUTEX = ""
+MUTEX_arm = "${ARM_MUTEX}"
+MUTEX_armeb = "${ARM_MUTEX}"
+EXTRA_OECONF += "${MUTEX}"
+
+# Cancel the site stuff - it's set for db3 and destroys the
+# configure.
+CONFIG_SITE = ""
+do_configure() {
+	oe_runconf
+}
+
+do_stage() {
+	# The .h files get installed read-only, the autostage
+	# function just uses cp -pPR, so do this by hand
+	rm -rf ${STAGE_TEMP}
+	mkdir -p ${STAGE_TEMP}
+	oe_runmake DESTDIR="${STAGE_TEMP}" install_include
+	cp -pPRf ${STAGE_TEMP}/${includedir}/* ${STAGING_INCDIR}/.
+	rm -rf ${STAGE_TEMP}
+	oe_libinstall -so -C .libs libdb-4.3 ${STAGING_LIBDIR}
+	ln -sf libdb-4.3.so ${STAGING_LIBDIR}/libdb.so
+	ln -sf libdb-4.3.a ${STAGING_LIBDIR}/libdb.a
+}
+
+do_install_append() {
+	# The docs end up in /usr/docs - not right.
+	if test -d "${D}/${prefix}/docs"
+	then
+		mkdir -p "${D}/${datadir}"
+		test ! -d "${D}/${docdir}" || rmdir "${D}/${docdir}"
+		mv "${D}/${prefix}/docs" "${D}/${docdir}"
+	fi
+}
diff --git a/openembedded/packages/db/files/arm-thumb-mutex.patch b/openembedded/packages/db/files/arm-thumb-mutex.patch
new file mode 100644
index 000000000..acd446fcd
--- /dev/null
+++ b/openembedded/packages/db/files/arm-thumb-mutex.patch
@@ -0,0 +1,36 @@
+--- db-4.3.29-dist/../dbinc/mutex.h	2005-11-15 07:33:27.761042518 -0800
++++ db-4.3.29-dist/../dbinc/mutex.h	2005-11-15 07:55:24.823920060 -0800
+@@ -470,6 +470,25 @@
+ #ifdef LOAD_ACTUAL_MUTEX_CODE
+ #define	MUTEX_SET_TEST	1		/* gcc/arm: 0 is clear, 1 is set. */
+ 
++#if defined __thumb__
++#define	MUTEX_SET(tsl) ({						\
++	int __r, __p;							\
++	asm volatile(							\
++		".align	2\n\t"						\
++		"bx	pc\n\t"						\
++		"nop\n\t"						\
++		".arm\n\t"						\
++		"swpb	%0, %2, [%3]\n\t"				\
++		"eor	%0, %0, #1\n\t"					\
++		"orr	%1, pc, #1\n\t"					\
++		"bx	%1\n\t"						\
++		".force_thumb"						\
++	    : "=&r" (__r), "=r" (__p)					\
++	    : "r" (1), "r" (tsl)					\
++	    );								\
++	__r & 1;							\
++})
++#else
+ #define	MUTEX_SET(tsl) ({						\
+ 	int __r;							\
+ 	asm volatile(							\
+@@ -480,6 +499,7 @@
+ 	    );								\
+ 	__r & 1;							\
+ })
++#endif
+ 
+ #define	MUTEX_UNSET(tsl)	(*(volatile tsl_t *)(tsl) = 0)
+ #define	MUTEX_INIT(tsl)		MUTEX_UNSET(tsl)