diff options
| -rw-r--r-- | README.hardware | 29 |
1 files changed, 3 insertions, 26 deletions
diff --git a/README.hardware b/README.hardware index 79607f7d3..025c6783f 100644 --- a/README.hardware +++ b/README.hardware @@ -234,32 +234,7 @@ You will need the following: * nfs root setup on your workstation * tftp server installed on your workstation -The original U-Boot image on board can't boot kernel versions 2.6.34 or later -successfully, so the U-Boot image should be upgraded to the latest U-Boot. - - 1. First build a new U-Boot image for mpc8315e-rdb, u-boot.bin.mpc8315erdb, - then make it available on your tftp server. To compile the new u-boot: - - $ git clone git://git.denx.de/u-boot.git - $ cd u-boot - $ git checkout -b v2010.09-mpc8315erdb v2010.09 - $ make ARCH=powerpc CROSS_COMPILE=<powerpc cross compiler path> MPC8315ERDB_config - $ make ARCH=powerpc CROSS_COMPILE=<powerpc cross compiler path> all - $ cp u-boot.bin u-boot.bin.mpc8315erdb - - 2. Set up the environment in U-Boot: - - =>setenv ipaddr <board ip> - =>setenv serverip <tftp server ip> - - 3. Flash the new U-Boot image: - - =>tftp 200000 u-boot.bin.mpc8315erdb - =>protect off all - =>erase fe000000 +60000 - =>cp.b 200000 fe000000 60000 - -Then the kernel can be booted successfully: +Load the kernel and boot it as follows: 1. Get the kernel (uImage.mpc8315erdb) and dtb (mpc8315erdb.dtb) files from the Poky build tmp/deploy directory, and make them available on your tftp @@ -267,6 +242,8 @@ Then the kernel can be booted successfully: 2. Set up the environment in U-Boot: + =>setenv ipaddr <board ip> + =>setenv serverip <tftp server ip> =>setenv bootargs root=/dev/nfs rw nfsroot=<nfsroot ip>:<rootfs path> ip=<board ip>:<server ip>:<gateway ip>:255.255.255.0:mpc8315e:eth0:off console=ttyS0,115200 3. Download kernel and dtb to boot kernel. |