diff options
Diffstat (limited to 'meta/conf/local.conf.sample.extended')
| -rw-r--r-- | meta/conf/local.conf.sample.extended | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/meta/conf/local.conf.sample.extended b/meta/conf/local.conf.sample.extended new file mode 100644 index 000000000..1f84ac7c4 --- /dev/null +++ b/meta/conf/local.conf.sample.extended @@ -0,0 +1,166 @@ +# BBMASK is a regular expression that can be used to tell BitBake to ignore +# certain recipes. +#BBMASK = "" + +# eglibc configurability is used to reduce minimal image's size. +# the all supported eglibc options are listed in DISTRO_FEATURES_LIBC +# and disabled by default. Uncomment and copy the DISTRO_FEATURES_LIBC +# and DISTRO_FEATURES definitions to local.conf to enable the options. +#DISTRO_FEATURES_LIBC = "ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt \ +# libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse \ +# libc-getlogin libc-idn libc-inet libc-inet-anl libc-libm libc-libm-big libc-locales libc-locale-code \ +# libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc \ +# libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc \ +# libc-posix-wchar-io" + +#DISTRO_FEATURES = "alsa bluetooth ext2 irda pcmcia usbgadget usbhost wifi nfs zeroconf pci ${DISTRO_FEATURES_LIBC}" + +# If you want to get an image based on gtk+directfb without x11, Please copy this variable to build/conf/local.conf +#DISTRO_FEATURES = "alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g directfb ${DISTRO_FEATURES_LIBC}" + +# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale +# packages at build time using qemu-native. Disabling it (by setting it to 0) +# will save some build time at the expense of breaking i18n on devices with +# less than 128MB RAM. +#ENABLE_BINARY_LOCALE_GENERATION = "1" + +# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not +# wish to perform the time-consuming step of generating all LIBC locales. +# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set +# appropriate values for IMAGE_LINGUAS and LIMIT_BUILT_LOCALES +# WARNING: this may break localisation! +#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8" +# See message above as to whether setting these is required +#IMAGE_LINGUAS ?= "en-gb" +#LIMIT_BUILT_LOCALES ?= "POSIX en_GB" + +# The following are used to control options related to debugging. +# +# Uncomment this to change the optimization to make debugging easer, at the +# possible cost of performance. +# DEBUG_BUILD = "1" +# +# Uncomment this to disable the stripping of the installed binaries +# INHIBIT_PACKAGE_STRIP = "1" +# +# Uncomment this to disable the split of the debug information into -dbg files +# INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +# +# When splitting debug information, the following controls the results of the +# file splitting. +# +# .debug (default): +# When splitting the debug information will be placed into +# a .debug directory in the same dirname of the binary produced: +# /bin/foo -> /bin/.debug/foo +# +# debug-file-directory: +# When splitting the debug information will be placed into +# a central debug-file-directory, /usr/lib/debug: +# /bin/foo -> /usr/lib/debug/bin/foo.debug +# +# Any source code referenced in the debug symbols will be copied +# and made available within the /usr/src/debug directory +# +#PACKAGE_DEBUG_SPLIT_STYLE = '.debug' +# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory' + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# TCMODE controls the characteristics of the generated packages/images by +# telling poky which toolchain 'profile' to use. +# +# The default is "default" +# Use "external-MODE" to use the precompiled external toolchains where MODE +# is the type of external toolchain to use e.g. eabi. You need to ensure +# the toolchain you want to use is included in an appropriate layer +# TCMODE = "external-eabi" + +# mklibs library size optimization is more useful to smaller images, +# and less useful for bigger images. Also mklibs library optimization +# can break the ABI compatibility, so should not be applied to the +# images which are to be extended or upgraded later. +#This enabled mklibs library size optimization just for the specified image. +#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal" +#This enable mklibs library size optimization will be for all the images. +#MKLIBS_OPTIMIZED_IMAGES ?= "all" + +# Uncomment this if your host distribution provides the help2man tool. +#ASSUME_PROVIDED += "help2man-native" + +# This value is currently used by pseudo to determine if the recipe should +# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system. +# +# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but +# it doesn't always guess properly. If you have 32-bit executables on +# your 64-bit build system, you likely want to set this to "0", +# otherwise you could end up with incorrect file attributes on the +# target filesystem. +# +# Default is to not build 32 bit libs on 64 bit systems, uncomment this +# if you need the 32 bits libs +#NO32LIBS = "0" + +# Uncomment the following lines to enable multilib builds +#require conf/multilib.conf +#MULTILIBS = "multilib:lib32" +#DEFAULTTUNE_virtclass-multilib-lib32 = "x86" + +# The network based PR service host and port +#PRSERV_HOST = "localhost" +#PRSERV_PORT = "8585" + +# Additional image generation features +# +# The following is a list of classes to import to use in the generation of images +# currently an example class is image_types_uboot +# IMAGE_CLASSES = " image_types_uboot" + +# Incremental rpm image generation, the rootfs would be totally removed +# and re-created in the second generation by default, but with +# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will +# do update(remove/add some pkgs) on it. NOTE: This is not suggested +# when you want to create a productive rootfs +#INC_RPM_IMAGE_GEN = "1" + +# This is a list of packages that require a commercial license to ship +# product. If shipped as part of an image these packages may have +# implications so they are disabled by default. To enable them, +# un-comment the below as appropriate. +#LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \ +# commercial_gst-openmax \ +# commercial_gst-plugins-ugly \ +# commercial_lame \ +# commercial_libmad \ +# commercial_libomxil \ +# commercial_mpeg2dec \ +# commercial_qmmp" + + +# Archiving source code configuration +# +# The following variables control which files to archive and the type to archive to generate. +# There are three basic class defintions of common operations that might be desired and these +# can be enabled by uncommenting one of the following lines: +# +# INHERIT += "archive-original-source" +# INHERIT += "archive-patched-source" +#INHERIT =+ "archive-configured-source" +# +# Type of archive: +# SOURCE_ARCHIVE_PACKAGE_TYPE = 'srpm' +#SOURCE_ARCHIVE_PACKAGE_TYPE ?= 'tar' +# +# Whether to include WORKDIR/temp, .bb and .inc files: +# 'logs_with_scripts' include WORKDIR/temp directory and .bb and .inc files +# 'logs' only include WORKDIR/temp +# SOURCE_ARCHIVE_LOG_WITH_SCRIPTS ?= 'logs' +#SOURCE_ARCHIVE_LOG_WITH_SCRIPTS ?= 'logs_with_scripts' |