diff options
Diffstat (limited to 'meta/packages/initscripts')
32 files changed, 0 insertions, 1850 deletions
diff --git a/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh b/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh deleted file mode 100644 index b577b9a03..000000000 --- a/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: alignment -# Required-Start: mountkernfs -# Required-Stop: mountkernfs -# Default-Start: S -# Default-Stop: -### END INIT INFO - -if [ -e /proc/cpu/alignment ]; then - echo "3" > /proc/cpu/alignment -fi - diff --git a/meta/packages/initscripts/initscripts-1.0/banner.sh b/meta/packages/initscripts/initscripts-1.0/banner.sh deleted file mode 100644 index 9e2b09125..000000000 --- a/meta/packages/initscripts/initscripts-1.0/banner.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: banner -# Required-Start: -# Required-Stop: -# Default-Start: S -# Default-Stop: -### END INIT INFO - -if [ ! -e /dev/tty ]; then - /bin/mknod -m 0666 /dev/tty c 5 0 -fi - -if ( > /dev/tty0 ) 2>/dev/null; then - vtmaster=/dev/tty0 -elif ( > /dev/vc/0 ) 2>/dev/null; then - vtmaster=/dev/vc/0 -elif ( > /dev/console ) 2>/dev/null; then - vtmaster=/dev/console -else - vtmaster=/dev/null -fi -echo > $vtmaster -echo "Please wait: booting..." > $vtmaster diff --git a/meta/packages/initscripts/initscripts-1.0/bootmisc.sh b/meta/packages/initscripts/initscripts-1.0/bootmisc.sh deleted file mode 100755 index bd11f9a2f..000000000 --- a/meta/packages/initscripts/initscripts-1.0/bootmisc.sh +++ /dev/null @@ -1,78 +0,0 @@ -### BEGIN INIT INFO -# Provides: bootmisc -# Required-Start: $local_fs mountvirtfs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Misc and other. -### END INIT INFO - -. /etc/default/rcS -# -# Put a nologin file in /etc to prevent people from logging in before -# system startup is complete. -# -if test "$DELAYLOGIN" = yes -then - echo "System bootup in progress - please wait" > /etc/nologin - cp /etc/nologin /etc/nologin.boot -fi - -# -# Set pseudo-terminal access permissions. -# -if test -c /dev/ttyp0 -then - chmod 666 /dev/tty[p-za-e][0-9a-f] - chown root:tty /dev/tty[p-za-e][0-9a-f] -fi - -# -# Apply /proc settings if defined -# -SYSCTL_CONF="/etc/sysctl.conf" -if [ -f "${SYSCTL_CONF}" ] -then - if [ -x "/sbin/sysctl" ] - then - /sbin/sysctl -p "${SYSCTL_CONF}" - else - echo "To have ${SYSCTL_CONF} applied during boot, install package <procps>." - fi -fi - -# -# Update /etc/motd. -# -if test "$EDITMOTD" != no -then - uname -a > /etc/motd.tmp - sed 1d /etc/motd >> /etc/motd.tmp - mv /etc/motd.tmp /etc/motd -fi - -# -# This is as good a place as any for a sanity check -# /tmp should be a symlink to /var/tmp to cut down on the number -# of mounted ramdisks. -if test ! -L /tmp && test -d /var/tmp -then - rm -rf /tmp - ln -sf /var/tmp /tmp -fi - -# Set the system clock from hardware clock -# If the timestamp is 1 day or more recent than the current time, -# use the timestamp instead. -/etc/init.d/hwclock.sh start -if test -e /etc/timestamp2 -then - SYSTEMDATE=`date "+%Y%m%d%2H%2M"` - read TIMESTAMP < /etc/timestamp2 - NEEDUPDATE=`expr \( $TIMESTAMP \> $SYSTEMDATE + 10000 \)` - if [ $NEEDUPDATE -eq 1 ]; then - date $TIMESTAMP - /etc/init.d/hwclock.sh stop - fi -fi -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/checkfs.sh b/meta/packages/initscripts/initscripts-1.0/checkfs.sh deleted file mode 100755 index 91897d4cb..000000000 --- a/meta/packages/initscripts/initscripts-1.0/checkfs.sh +++ /dev/null @@ -1,49 +0,0 @@ -### BEGIN INIT INFO -# Provides: checkfs -# Required-Start: checkroot -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Check all other file systems -### END INIT INFO - -. /etc/default/rcS - -# -# Check the rest of the filesystems. -# -if test ! -f /fastboot -then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test "`uname -m`" = "s390" && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking all filesystems..." - fsck $spinner -R -A $fix $force - if test "$?" -gt 1 - then - echo - echo "fsck failed. Please repair manually." - echo - echo "CONTROL-D will exit from this shell and continue system startup." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - fi -fi -rm -f /fastboot /forcefsck - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/checkroot.sh b/meta/packages/initscripts/initscripts-1.0/checkroot.sh deleted file mode 100755 index 02697ce9b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/checkroot.sh +++ /dev/null @@ -1,137 +0,0 @@ -### BEGIN INIT INFO -# Provides: checkroot -# Required-Start: udev -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Check to root file system. -### END INIT INFO - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Read /etc/fstab. -# -exec 9< /etc/fstab -rootmode=rw -rootopts=rw -rootcheck=no -swap_on_md=no -devfs= -while read fs mnt type opts dump pass junk <&9 -do - case "$fs" in - ""|\#*) - continue; - ;; - /dev/md*) - # Swap on md device. - test "$type" = swap && swap_on_md=yes - ;; - /dev/*) - ;; - *) - # Might be a swapfile. - test "$type" = swap && swap_on_md=yes - ;; - esac - test "$type" = devfs && devfs="$fs" - test "$mnt" != / && continue - rootopts="$opts" - test "$pass" = 0 -o "$pass" = "" && rootcheck=no - case "$opts" in - ro|ro,*|*,ro|*,ro,*) - rootmode=ro - ;; - esac -done -exec 0>&9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -test "$VERBOSE" != no && echo "Activating swap" -swapon -a 2> /dev/null - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - ln -sf /proc/mounts /dev/mtab -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/device_table.txt b/meta/packages/initscripts/initscripts-1.0/device_table.txt deleted file mode 100644 index a302c5aca..000000000 --- a/meta/packages/initscripts/initscripts-1.0/device_table.txt +++ /dev/null @@ -1,197 +0,0 @@ -#/dev/ d 775 0 0 - - - - - -#/dev/msys d 775 0 0 - - - - - -#/dev/pts d 775 0 0 - - - - - -#/var d 775 0 0 - - - - - -/boot/var/empty d 755 0 3 - - - - -/dev/apm_bios c 660 0 46 10 134 - - - -/dev/audio c 660 0 29 14 4 - - - -/dev/audio1 c 660 0 29 14 20 - - - -/dev/audio2 c 660 0 29 14 36 - - - -/dev/audio3 c 660 0 29 14 52 - - - -/dev/bty c 644 0 0 60 0 0 1 5 -/dev/sharp_fl c 640 0 44 254 0 - - - -/dev/console c 660 0 5 5 1 - - -/dev/cusa0 c 640 0 0 205 5 - - - -/dev/cusa1 c 640 0 0 205 6 - - - -/dev/cusa2 c 640 0 0 205 7 - - - -/dev/dsp c 660 0 29 14 3 - - - -/dev/dsp1 c 660 0 29 14 19 - - - -/dev/dsp2 c 660 0 29 14 35 - - - -/dev/dsp3 c 660 0 29 14 51 - - - -/dev/fb c 660 0 44 29 0 0 32 2 -/dev/fb0autodetect c 660 0 44 29 1 - - - -/dev/fb0current c 660 0 44 29 0 - - - -#/dev/fb1 c 660 0 44 29 32 - - - -/dev/fb1autodetect c 660 0 44 29 33 - - - -/dev/fb1current c 660 0 44 29 32 - - - -/dev/full c 666 0 7 - - - -/dev/hda b 660 0 6 3 0 - - - -/dev/hda b 660 0 6 3 1 1 1 20 -/dev/hdb b 660 0 6 3 64 - - - -/dev/hdb b 660 0 6 3 65 1 1 20 -/dev/hdc b 660 0 6 22 0 - - - -/dev/hdc b 660 0 6 22 1 1 1 20 -/dev/initctl p 600 0 0 - - - - -/dev/i2c0 c 660 0 0 89 0 - - - -/dev/inportbm c 660 0 0 10 2 - - - -/dev/input/event c 660 0 0 13 64 0 1 20 -/dev/ircomm0 c 640 0 0 161 0 - - - -/dev/jbm c 660 0 0 10 4 - - - -/dev/kmem c 640 0 15 1 2 - - - -/dev/lirc c 660 0 5 61 0 - - - -/dev/logibm c 660 0 0 10 0 - - - -/dev/loop0 b 660 0 11 7 0 - - - -/dev/loop1 b 660 0 11 7 1 - - - -/dev/mem c 640 0 15 1 1 - - - -/dev/mixer c 666 0 0 14 0 - - - -/dev/mixer1 c 666 0 0 14 16 - - - -/dev/mixer2 c 666 0 0 14 32 - - - -/dev/mixer3 c 666 0 0 14 48 - - - -/dev/mmcda b 640 0 0 60 0 - - - -/dev/mmcda1 b 640 0 0 60 1 - - - -/dev/mmcda2 b 640 0 0 60 2 - - - -/dev/msys/fla b 660 0 11 100 0 - - - -/dev/msys/fla1 b 660 0 11 100 1 - - - -/dev/msys/fla2 b 660 0 11 100 2 - - - -/dev/msys/fla3 b 660 0 11 100 3 - - - -/dev/msys/fla4 b 660 0 11 100 4 - - - -/dev/msys/flb b 660 0 11 100 64 - - - -/dev/msys/flb1 b 660 0 11 100 65 - - - -/dev/msys/flb2 b 660 0 11 100 66 - - - -/dev/msys/flb3 b 660 0 11 100 67 - - - -/dev/msys/flb4 b 660 0 11 100 68 - - - -/dev/mtd c 660 0 6 90 0 0 2 8 -/dev/mtdblock b 640 0 0 31 0 0 1 8 -/dev/nst0 c 664 0 11 9 128 - - - -/dev/nst0a c 664 0 11 9 224 - - - -/dev/nst0l c 664 0 11 9 160 - - - -/dev/nst0m c 664 0 11 9 192 - - - -/dev/nst1 c 664 0 11 9 129 - - - -/dev/nst1a c 664 0 11 9 225 - - - -/dev/nst1l c 664 0 11 9 161 - - - -/dev/nst1m c 664 0 11 9 193 - - - -/dev/null c 666 0 0 1 3 - - - -/dev/par0 c 660 0 7 6 0 - - - -/dev/par1 c 660 0 7 6 1 - - - -/dev/par2 c 660 0 7 6 2 - - - -/dev/port c 640 0 15 1 4 - - - -/dev/ppp c 640 0 0 108 0 - - - -/dev/psaux c 660 0 0 10 1 - - - -/dev/ptmx c 666 0 5 5 2 - - - -/dev/ptya0 c 660 0 5 2 176 - - - -/dev/ptya1 c 660 0 5 2 177 - - - -/dev/ptya2 c 660 0 5 2 178 - - - -/dev/ptya3 c 660 0 5 2 179 - - - -/dev/ptya4 c 660 0 5 2 180 - - - -/dev/ptya5 c 660 0 5 2 181 - - - -/dev/ptya6 c 660 0 5 2 182 - - - -/dev/ptya7 c 660 0 5 2 183 - - - -/dev/ptya8 c 660 0 5 2 184 - - - -/dev/ptya9 c 660 0 5 2 185 - - - -/dev/ptyaa c 660 0 5 2 186 - - - -/dev/ptyab c 660 0 5 2 187 - - - -/dev/ptyac c 660 0 5 2 188 - - - -/dev/ptyad c 660 0 5 2 189 - - - -/dev/ptyae c 660 0 5 2 190 - - - -/dev/ptyaf c 660 0 5 2 191 - - - -/dev/ram b 640 0 0 1 0 0 1 4 -/dev/random c 444 0 0 1 8 - - - -/dev/rfcomm0 c 660 0 0 216 0 - - - -/dev/rfcomm1 c 660 0 0 216 1 - - - -/dev/rfcomm2 c 660 0 0 216 2 - - - -/dev/rfcomm3 c 660 0 0 216 3 - - - -/dev/rfcomm4 c 660 0 0 216 4 - - - -/dev/rfcomm5 c 660 0 0 216 5 - - - -/dev/rfcomm6 c 660 0 0 216 6 - - - -/dev/rfcomm7 c 660 0 0 216 7 - - - -/dev/rfcomm8 c 660 0 0 216 8 - - - -/dev/rfcomm9 c 660 0 0 216 9 - - - -/dev/rfcomm10 c 660 0 0 216 10 - - - -/dev/rfcomm11 c 660 0 0 216 11 - - - -/dev/rfcomm12 c 660 0 0 216 12 - - - -/dev/rfcomm13 c 660 0 0 216 13 - - - -/dev/rfcomm14 c 660 0 0 216 14 - - - -/dev/rfcomm15 c 660 0 0 216 15 - - - -/dev/rmidi0 c 660 0 0 35 64 - - - -/dev/rmidi1 c 660 0 0 35 65 - - - -/dev/rmidi2 c 660 0 0 35 66 - - - -/dev/rmidi3 c 660 0 0 35 67 - - - -/dev/rtc c 660 0 47 10 135 - - - -/dev/scd0 b 660 0 6 11 0 - - - -/dev/scd1 b 660 0 6 11 1 - - - -/dev/sda b 660 0 6 8 0 - - - -/dev/sda1 b 660 0 6 8 1 - - - -/dev/sda2 b 660 0 6 8 2 - - - -/dev/sda3 b 660 0 6 8 3 - - - -/dev/sda4 b 660 0 6 8 4 - - - -/dev/sda5 b 660 0 6 8 5 - - - -/dev/sda6 b 660 0 6 8 6 - - - -/dev/sda7 b 660 0 6 8 7 - - - -/dev/sda8 b 660 0 6 8 8 - - - -/dev/sda9 b 660 0 6 8 9 - - - -/dev/sdb b 660 0 6 8 16 - - - -/dev/sdb1 b 660 0 6 8 17 - - - -/dev/sdb2 b 660 0 6 8 18 - - - -/dev/sdb3 b 660 0 6 8 19 - - - -/dev/sdb4 b 660 0 6 8 20 - - - -/dev/sdb5 b 660 0 6 8 21 - - - -/dev/sdb6 b 660 0 6 8 22 - - - -/dev/sdb7 b 660 0 6 8 23 - - - -/dev/sdb8 b 660 0 6 8 24 - - - -/dev/sdb9 b 660 0 6 8 25 - - - -/dev/sdc b 660 0 6 8 32 - - - -/dev/sdc1 b 660 0 6 8 33 - - - -/dev/sdc2 b 660 0 6 8 34 - - - -/dev/sdc3 b 660 0 6 8 35 - - - -/dev/sdc4 b 660 0 6 8 36 - - - -/dev/sdc5 b 660 0 6 8 37 - - - -/dev/sdc6 b 660 0 6 8 38 - - - -/dev/sdc7 b 660 0 6 8 39 - - - -/dev/sdc8 b 660 0 6 8 40 - - - -/dev/sdc9 b 660 0 6 8 41 - - - -/dev/sd_slotstat c 660 0 6 10 240 - - - -/dev/sharp_audioctl c 660 0 29 10 213 - - - -/dev/sharp_buz c 660 0 29 10 211 - - - -/dev/sharp_kbdctl c 660 0 45 10 214 - - - -/dev/sharp_led c 660 0 48 10 210 - - - -/dev/sharp_ts c 640 0 45 11 0 - - - -/dev/smtpe0 c 640 0 0 35 128 - - - -/dev/smtpe1 c 640 0 0 35 129 - - - -/dev/smtpe2 c 640 0 0 35 130 - - - -/dev/smtpe3 c 640 0 0 35 131 - - - -/dev/sndstat c 660 0 29 14 6 - - - -/dev/snd/seq c 660 0 0 116 1 - - - -/dev/snd/timer c 660 0 0 116 33 - - - -/dev/snd/controlC0 c 660 0 0 116 0 - - - -/dev/snd/controlC1 c 660 0 0 116 32 - - - -/dev/snd/controlC2 c 660 0 0 116 64 - - - -/dev/snd/controlC3 c 660 0 0 116 96 - - - -/dev/snd/hwC0D0 c 660 0 0 116 4 - - - -/dev/snd/hwC0D1 c 660 0 0 116 5 - - - -/dev/snd/hwC0D2 c 660 0 0 116 6 - - - -/dev/snd/hwC0D3 c 660 0 0 116 7 - - - -/dev/snd/pcmC0D0c c 660 0 0 116 24 - - - -/dev/snd/pcmC0D0p c 660 0 0 116 16 - - - -/dev/snd/pcmC0D1c c 660 0 0 116 25 - - - -/dev/snd/pcmC0D1p c 660 0 0 116 17 - - - -/dev/snd/pcmC0D2c c 660 0 0 116 26 - - - -/dev/snd/pcmC0D2p c 660 0 0 116 18 - - - -/dev/snd/pcmC0D3c c 660 0 0 116 27 - - - -/dev/snd/pcmC0D3p c 660 0 0 116 19 - - - -/dev/st0 c 660 0 11 9 0 - - - -/dev/st0a c 660 0 11 9 96 - - - -/dev/st0l c 660 0 11 9 32 - - - -/dev/st0m c 660 0 11 9 64 - - - -/dev/st1 c 660 0 11 9 1 - - - -/dev/st1a c 660 0 11 9 97 - - - -/dev/st1l c 660 0 11 9 33 - - - -/dev/st1m c 660 0 11 9 65 - - - -/dev/tty c 664 0 5 5 0 - - - -/dev/tty c 666 0 5 4 0 0 1 9 -/dev/ttyS c 640 0 5 4 64 0 1 4 -/dev/ttySA c 640 0 5 204 5 0 1 4 -/dev/ttyUSB c 660 0 5 188 0 0 1 2 -/dev/urandom c 644 0 0 1 9 - - - -/dev/usbmouse c 640 0 45 10 32 - - - -/dev/zero c 644 0 0 1 5 - - - -/dev/input/mice c 660 0 0 13 63 - - - diff --git a/meta/packages/initscripts/initscripts-1.0/devpts b/meta/packages/initscripts/initscripts-1.0/devpts deleted file mode 100644 index 4a0978b40..000000000 --- a/meta/packages/initscripts/initscripts-1.0/devpts +++ /dev/null @@ -1,5 +0,0 @@ -# GID of the `tty' group -TTYGRP=5 - -# Set to 600 to have `mesg n' be the default -TTYMODE=620 diff --git a/meta/packages/initscripts/initscripts-1.0/devpts.sh b/meta/packages/initscripts/initscripts-1.0/devpts.sh deleted file mode 100755 index 18202adcc..000000000 --- a/meta/packages/initscripts/initscripts-1.0/devpts.sh +++ /dev/null @@ -1,28 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: devpts -# Required-Start: udev -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount /dev/pts file systems. -### END INIT INFO - -. /etc/default/devpts - -if grep -q devpts /proc/filesystems -then - # - # Create multiplexor device. - # - test -c /dev/ptmx || mknod -m 666 /dev/ptmx c 5 2 - - # - # Mount /dev/pts if needed. - # - if ! grep -q devpts /proc/mounts - then - mkdir -p /dev/pts - mount -t devpts devpts /dev/pts -ogid=${TTYGRP},mode=${TTYMODE} - fi -fi diff --git a/meta/packages/initscripts/initscripts-1.0/finish.sh b/meta/packages/initscripts/initscripts-1.0/finish.sh deleted file mode 100755 index 183a384fa..000000000 --- a/meta/packages/initscripts/initscripts-1.0/finish.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: finish.sh -# Required-Start: $remote_fs rmnologin -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: -# Short-Description: Finish system start -# Description: -### END INIT INFO - -if ! test -e /etc/.configured; then - > /etc/.configured -fi diff --git a/meta/packages/initscripts/initscripts-1.0/functions b/meta/packages/initscripts/initscripts-1.0/functions deleted file mode 100644 index 689fd32b3..000000000 --- a/meta/packages/initscripts/initscripts-1.0/functions +++ /dev/null @@ -1,14 +0,0 @@ -# -*-Shell-script-*- -# -# functions This file contains functions to be used by most or all -# shell scripts in the /etc/init.d directory. -# - -machine_id() { # return the machine ID - awk 'BEGIN { FS=": " } /Hardware/ { gsub(" ", "_", $2); print tolower($2) } ' </proc/cpuinfo -} - -killproc() { # kill the named process(es) - pid=`/bin/pidof $1` - [ "$pid" != "" ] && kill $pid -} diff --git a/meta/packages/initscripts/initscripts-1.0/halt b/meta/packages/initscripts/initscripts-1.0/halt deleted file mode 100755 index 609b793b7..000000000 --- a/meta/packages/initscripts/initscripts-1.0/halt +++ /dev/null @@ -1,29 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: halt -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: 0 -# Short-Description: Execute the halt command. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# See if we need to cut the power. -if test -x /etc/init.d/ups-monitor -then - /etc/init.d/ups-monitor poweroff -fi - -# Don't shut down drives if we're using RAID. -hddown="-h" -if grep -qs '^md.*active' /proc/mdstat -then - hddown="" -fi - -halt -d -f -i -p $hddown - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/hostname.sh b/meta/packages/initscripts/initscripts-1.0/hostname.sh deleted file mode 100755 index 4399ee7b1..000000000 --- a/meta/packages/initscripts/initscripts-1.0/hostname.sh +++ /dev/null @@ -1,13 +0,0 @@ -### BEGIN INIT INFO -# Provides: hostname -# Required-Start: -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Set hostname based on /etc/hostname -### END INIT INFO - -if test -f /etc/hostname -then - hostname -F /etc/hostname -fi diff --git a/meta/packages/initscripts/initscripts-1.0/jornada6xx/checkroot.sh b/meta/packages/initscripts/initscripts-1.0/jornada6xx/checkroot.sh deleted file mode 100755 index 9e2d3cfc8..000000000 --- a/meta/packages/initscripts/initscripts-1.0/jornada6xx/checkroot.sh +++ /dev/null @@ -1,211 +0,0 @@ -# -# checkroot.sh Check to root filesystem. -# -# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl -# - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Ensure that bdflush (update) is running before any major I/O is -# performed (the following fsck is a good example of such activity :). -# -test -x /sbin/update && update - -# -# Read /etc/fstab. -# -exec 9>&0 </etc/fstab -rootmode=rw -rootopts=rw -test "$ENABLE_ROOTFS_FSCK" = yes && rootcheck="yes" || rootcheck="no" -swap_on_md=no -devfs= -while read fs mnt type opts dump pass junk -do - case "$fs" in - ""|\#*) - continue; - ;; - /dev/md*) - # Swap on md device. - test "$type" = swap && swap_on_md=yes - ;; - /dev/*) - ;; - *) - # Might be a swapfile. - test "$type" = swap && swap_on_md=yes - ;; - esac - - test "$type" = devfs && devfs="$fs" - - # Currently we do not care about the other entries - if test "$mnt" = "/" - then - #echo "[$fs] [$mnt] [$type] [$opts] [$dump] [$pass] [$junk]" - - rootopts="$opts" - roottype="$type" - - #The "spinner" is broken on busybox sh - TERM=dumb - - test "$pass" = 0 -o "$pass" = "" && rootcheck=no - - # Enable fsck for ext2 and ext3 rootfs, disable for everything else - case "$type" in - ext3) rootcheck=yes;; - *) rootcheck=no;; - esac - - if test "$rootcheck" = yes - then - if ! test -x "/sbin/fsck.${roottype}" - then - echo -e "\n * * * WARNING: /sbin/fsck.${roottype} is missing! * * *\n" - rootcheck=no - fi - fi - - case "$opts" in - ro|ro,*|*,ro|*,ro,*) - rootmode=ro - ;; - esac - fi -done -exec 0>&9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -doswap=no -test -d /proc/1 || mount -n /proc -case "`uname -r`" in - 2.[0123].*) - if test $swap_on_md = yes && grep -qs resync /proc/mdstat - then - test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" - else - doswap=yes - fi - ;; - *) - doswap=yes - ;; -esac -if test $doswap = yes -then - test "$VERBOSE" != no && echo "Activating swap" - swapon -a 2> /dev/null -fi - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - - # Since this script is run very early in the boot-process, it should be safe to assume that the - # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot - # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal - chvt 1 - - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# This part is only needed if the rootfs was mounted ro. -# -if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - -# Add a second check, which seems to be needed for some kernel versions -if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - - -echo "Remounting root file system..." -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - if test ! -L /etc/mtab - then - rm -f /etc/mtab~ /etc/nologin - : > /etc/mtab - fi - mount -f -o remount / - mount -f /proc - test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh b/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh deleted file mode 100755 index 9e2d3cfc8..000000000 --- a/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh +++ /dev/null @@ -1,211 +0,0 @@ -# -# checkroot.sh Check to root filesystem. -# -# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl -# - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Ensure that bdflush (update) is running before any major I/O is -# performed (the following fsck is a good example of such activity :). -# -test -x /sbin/update && update - -# -# Read /etc/fstab. -# -exec 9>&0 </etc/fstab -rootmode=rw -rootopts=rw -test "$ENABLE_ROOTFS_FSCK" = yes && rootcheck="yes" || rootcheck="no" -swap_on_md=no -devfs= -while read fs mnt type opts dump pass junk -do - case "$fs" in - ""|\#*) - continue; - ;; - /dev/md*) - # Swap on md device. - test "$type" = swap && swap_on_md=yes - ;; - /dev/*) - ;; - *) - # Might be a swapfile. - test "$type" = swap && swap_on_md=yes - ;; - esac - - test "$type" = devfs && devfs="$fs" - - # Currently we do not care about the other entries - if test "$mnt" = "/" - then - #echo "[$fs] [$mnt] [$type] [$opts] [$dump] [$pass] [$junk]" - - rootopts="$opts" - roottype="$type" - - #The "spinner" is broken on busybox sh - TERM=dumb - - test "$pass" = 0 -o "$pass" = "" && rootcheck=no - - # Enable fsck for ext2 and ext3 rootfs, disable for everything else - case "$type" in - ext3) rootcheck=yes;; - *) rootcheck=no;; - esac - - if test "$rootcheck" = yes - then - if ! test -x "/sbin/fsck.${roottype}" - then - echo -e "\n * * * WARNING: /sbin/fsck.${roottype} is missing! * * *\n" - rootcheck=no - fi - fi - - case "$opts" in - ro|ro,*|*,ro|*,ro,*) - rootmode=ro - ;; - esac - fi -done -exec 0>&9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -doswap=no -test -d /proc/1 || mount -n /proc -case "`uname -r`" in - 2.[0123].*) - if test $swap_on_md = yes && grep -qs resync /proc/mdstat - then - test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" - else - doswap=yes - fi - ;; - *) - doswap=yes - ;; -esac -if test $doswap = yes -then - test "$VERBOSE" != no && echo "Activating swap" - swapon -a 2> /dev/null -fi - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - - # Since this script is run very early in the boot-process, it should be safe to assume that the - # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot - # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal - chvt 1 - - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# This part is only needed if the rootfs was mounted ro. -# -if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - -# Add a second check, which seems to be needed for some kernel versions -if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - - -echo "Remounting root file system..." -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - if test ! -L /etc/mtab - then - rm -f /etc/mtab~ /etc/nologin - : > /etc/mtab - fi - mount -f -o remount / - mount -f /proc - test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/mountall.sh b/meta/packages/initscripts/initscripts-1.0/mountall.sh deleted file mode 100755 index 9d4f97b68..000000000 --- a/meta/packages/initscripts/initscripts-1.0/mountall.sh +++ /dev/null @@ -1,38 +0,0 @@ -### BEGIN INIT INFO -# Provides: mountall -# Required-Start: mountvirtfs -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount all filesystems. -# Description: -### END INIT INFO - -. /etc/default/rcS - -# -# Mount local filesystems in /etc/fstab. For some reason, people -# might want to mount "proc" several times, and mount -v complains -# about this. So we mount "proc" filesystems without -v. -# -test "$VERBOSE" != no && echo "Mounting local filesystems..." -mount -at nonfs,nosmbfs,noncpfs 2>/dev/null - -# -# We might have mounted something over /dev, see if /dev/initctl is there. -# -if test ! -p /dev/initctl -then - rm -f /dev/initctl - mknod -m 600 /dev/initctl p -fi -kill -USR1 1 - -# -# Execute swapon command again, in case we want to swap to -# a file on a now mounted filesystem. -# -swapon -a 2> /dev/null - -: exit 0 - diff --git a/meta/packages/initscripts/initscripts-1.0/mountnfs.sh b/meta/packages/initscripts/initscripts-1.0/mountnfs.sh deleted file mode 100755 index 46c58b16a..000000000 --- a/meta/packages/initscripts/initscripts-1.0/mountnfs.sh +++ /dev/null @@ -1,83 +0,0 @@ -### BEGIN INIT INFO -# Provides: mountnfs -# Required-Start: $local_fs $network $portmap -# Required-Stop: -# Default-Start: S -# Default-Stop: -### END INIT INFO - -. /etc/default/rcS - -# -# Run in a subshell because of I/O redirection. -# -test -f /etc/fstab && ( - -# -# Read through fstab line by line. If it is NFS, set the flag -# for mounting NFS filesystems. If any NFS partition is found and it -# not mounted with the nolock option, we start the portmapper. -# -portmap=no -mount_nfs=no -mount_smb=no -mount_ncp=no -while read device mountpt fstype options -do - case "$device" in - ""|\#*) - continue - ;; - esac - - case "$options" in - *noauto*) - continue - ;; - esac - - if test "$fstype" = nfs - then - mount_nfs=yes - case "$options" in - *nolock*) - ;; - *) - portmap=yes - ;; - esac - fi - if test "$fstype" = smbfs - then - mount_smb=yes - fi - if test "$fstype" = ncpfs - then - mount_ncp=yes - fi -done - -exec 0>&1 - -if test "$portmap" = yes -then - if test -x /sbin/portmap - then - echo -n "Starting portmapper... " - start-stop-daemon --start --quiet --exec /sbin/portmap - sleep 2 - fi -fi - -if test "$mount_nfs" = yes || test "$mount_smb" = yes || test "$mount_ncp" = yes -then - echo "Mounting remote filesystems..." - test "$mount_nfs" = yes && mount -a -t nfs - test "$mount_smb" = yes && mount -a -t smbfs - test "$mount_ncp" = yes && mount -a -t ncpfs -fi - -) < /etc/fstab - -: exit 0 - diff --git a/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab b/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab deleted file mode 100644 index 8d313b2a5..000000000 --- a/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab +++ /dev/null @@ -1,48 +0,0 @@ -# /etc/inittab: init(8) configuration. -# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ - -# The default runlevel. -id:5:initdefault: - -# Boot-time system configuration/initialization script. -# This is run first except when booting in emergency (-b) mode. -si::sysinit:/etc/init.d/rcS - -# What to do in single-user mode. -~~:S:wait:/sbin/sulogin - -# Shut down if kernel sends us SIGINT or SIGPWR -ca::ctrlaltdel:/sbin/halt -p -pf::powerfailnow:/sbin/halt -p - -# /etc/init.d executes the S and K scripts upon change -# of runlevel. -# -# Runlevel 0 is halt. -# Runlevel 1 is single-user. -# Runlevels 2-5 are multi-user. -# Runlevel 6 is reboot. - -l0:0:wait:/etc/init.d/rc 0 -l1:1:wait:/etc/init.d/rc 1 -l2:2:wait:/etc/init.d/rc 2 -l3:3:wait:/etc/init.d/rc 3 -l4:4:wait:/etc/init.d/rc 4 -l5:5:wait:/etc/init.d/rc 5 -l6:6:wait:/etc/init.d/rc 6 -# Normally not reached, but fallthrough in case of emergency. -z6:6:respawn:/sbin/sulogin - -# /sbin/getty invocations for the runlevels. -# -# The "id" field MUST be the same as the last -# characters of the device (after "tty"). -# -# Format: -# <id>:<runlevels>:<action>:<process> - -# NOTE: FIC GTA01 has this odd multiplexer on ttySAC0 since -# GSM shares it with the serial output. We only allow -# the getty in runlevel 2 to cope with that. gsmd gets -# started in runlevel 3. -- mickey@openmoko.org -S:2:respawn:/sbin/getty 115200 ttySAC0 diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/extractfs b/meta/packages/initscripts/initscripts-1.0/openmn/extractfs deleted file mode 100755 index 7e57dedd2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/extractfs +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if (grep -q 'tmpfs.*/var.*tmpfs' /proc/mounts) -then - test "$VERBOSE" != no && echo "Copying /var filesystem..." - cp -a /boot/var / -fi diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/packages b/meta/packages/initscripts/initscripts-1.0/openmn/packages deleted file mode 100755 index 2566487d2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/packages +++ /dev/null @@ -1,63 +0,0 @@ -#!/bin/sh -# Original author: ??? -# -# Additions by Steph Meslin-Weber: -# x Percentage display -# x Dot display of dependency installations -# - removed both of above -# - display is now X of Y packages and current package name being installed - -#. /etc/default/rcS - -reconfigure () { - pkg=$1 - path=$2 - isdependent=$3 - test -e "$path/info/$pkg.control" || return 1 - depends="`cat $path/info/$pkg.control|grep Depends|cut -d: -f2`" - - # make sure we haven't already installed this package - isthere=`cat /tmp/.configured.list|grep $pkg` - if test "$isthere" != ""; then - return 1 - fi - - if test "$depends" != ""; then - for dep in $depends; do - (echo $log|grep $dep >/dev/null 2>&1) || ( reconfigure $dep $path "$max" "$pkg" && log="$log $dep"; ) - done - fi - - echo -ne " ${pkg}" - - test -e "$path/info/$pkg.prerm" && $path/info/$pkg.prerm unconfigure >/dev/null 2>&1 - test -e "$path/info/$pkg.postinst" && $path/info/$pkg.postinst configure >/dev/null 2>&1 - - log="$log $pkg" - - # append the installed package name to the list - echo -ne "$pkg\n" >> /tmp/.configured.list - - echo - return 0 -} - -if test ! -e /etc/.configured; then - echo "Reconfiguring all packages installed to root:" - - # create unique packages list file - rm -f /tmp/.configured.list - touch /tmp/.configured.list - - log="" - - for control in /usr/lib/ipkg/info/*.control; do - package=`echo $control|sed -e 's,.*/,,g; s,\.control,,g;'` - (echo $log|grep $package >/dev/null 2>&1) || reconfigure $package /usr/lib/ipkg - done - - # cleanup unique packages list file - rm -f /tmp/.configured.list -fi - -test -f /usr/lib/ipkg/info/task-ramses || ipkg install task-ramses diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/umountfs b/meta/packages/initscripts/initscripts-1.0/openmn/umountfs deleted file mode 100755 index 399194109..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/umountfs +++ /dev/null @@ -1,17 +0,0 @@ -#! /bin/sh -# -# umountfs Turn off swap and unmount all local filesystems. -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo "Deactivating swap..." -swapoff -a - -# We leave /proc mounted. -echo "Unmounting local filesystems..." -umount -f -a -r - -mount -o remount,ro / - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh b/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh deleted file mode 100755 index 1813fd124..000000000 --- a/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh +++ /dev/null @@ -1,197 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: volatile -# Required-Start: $local_fs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: -# Short-Description: Populate the volatile filesystem -### END INIT INFO - -. /etc/default/rcS - -CFGDIR="/etc/default/volatiles" -TMPROOT="/var/tmp" -COREDEF="00_core" - -[ "${VERBOSE}" != "no" ] && echo "Populating volatile Filesystems." - -create_file() { - EXEC=" - touch \"$1\"; - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " - - test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache - - [ -e "$1" ] && { - [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." - } || { - eval $EXEC & - } -} - -mk_dir() { - EXEC=" - mkdir -p \"$1\"; - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " - - test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache - - [ -e "$1" ] && { - [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." - } || { - eval $EXEC & - } -} - -link_file() { - EXEC="test -e \"$2\" -o -L $2 || ln -s \"$1\" \"$2\" >/dev/tty0 2>&1" - - test "$VOLATILE_ENABLE_CACHE" = yes && echo " $EXEC" >> /etc/volatile.cache - - [ -e "$2" ] && { - echo "Cannot create link over existing -${TNAME}-." >&2 - } || { - eval $EXEC & - } -} - -check_requirements() { - - cleanup() { - rm "${TMP_INTERMED}" - rm "${TMP_DEFINED}" - rm "${TMP_COMBINED}" - } - - CFGFILE="$1" - - [ `basename "${CFGFILE}"` = "${COREDEF}" ] && return 0 - - TMP_INTERMED="${TMPROOT}/tmp.$$" - TMP_DEFINED="${TMPROOT}/tmpdefined.$$" - TMP_COMBINED="${TMPROOT}/tmpcombined.$$" - - - cat /etc/passwd | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 2 > "${TMP_INTERMED}" - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" - - NR_DEFINED_USERS="`cat "${TMP_DEFINED}" | wc -l`" - NR_COMBINED_USERS="`cat "${TMP_COMBINED}" | wc -l`" - - [ "${NR_DEFINED_USERS}" -ne "${NR_COMBINED_USERS}" ] && { - echo "Undefined users:" - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" - cleanup - return 1 - } - - - cat /etc/group | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 3 > "${TMP_INTERMED}" - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" - - NR_DEFINED_GROUPS="`cat "${TMP_DEFINED}" | wc -l`" - NR_COMBINED_GROUPS="`cat "${TMP_COMBINED}" | wc -l`" - - [ "${NR_DEFINED_GROUPS}" -ne "${NR_COMBINED_GROUPS}" ] && { - echo "Undefined groups:" - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" - cleanup - return 1 - } - - # Add checks for required directories here - - cleanup - return 0 - } - -apply_cfgfile() { - - CFGFILE="$1" - - check_requirements "${CFGFILE}" || { - echo "Skipping ${CFGFILE}" - return 1 - } - - cat ${CFGFILE} | grep -v "^#" | \ - while read LINE; do - - eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ \(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 TLTARGET=\6/p"` - - [ "${VERBOSE}" != "no" ] && echo "Checking for -${TNAME}-." - - - [ "${TTYPE}" = "l" ] && { - TSOURCE="$TLTARGET" - [ -L "${TNAME}" ] || { - [ "${VERBOSE}" != "no" ] && echo "Creating link -${TNAME}- pointing to -${TSOURCE}-." - link_file "${TSOURCE}" "${TNAME}" & - } - continue - } - - [ -L "${TNAME}" ] && { - [ "${VERBOSE}" != "no" ] && echo "Found link." - NEWNAME=`ls -l "${TNAME}" | sed -e 's/^.*-> \(.*\)$/\1/'` - echo ${NEWNAME} | grep -v "^/" >/dev/null && { - TNAME="`echo ${TNAME} | sed -e 's@\(.*\)/.*@\1@'`/${NEWNAME}" - [ "${VERBOSE}" != "no" ] && echo "Converted relative linktarget to absolute path -${TNAME}-." - } || { - TNAME="${NEWNAME}" - [ "${VERBOSE}" != "no" ] && echo "Using absolute link target -${TNAME}-." - } - } - - case "${TTYPE}" in - "f") [ "${VERBOSE}" != "no" ] && echo "Creating file -${TNAME}-." - create_file "${TNAME}" & - ;; - "d") [ "${VERBOSE}" != "no" ] && echo "Creating directory -${TNAME}-." - mk_dir "${TNAME}" & - # Add check to see if there's an entry in fstab to mount. - ;; - *) [ "${VERBOSE}" != "no" ] && echo "Invalid type -${TTYPE}-." - continue - ;; - esac - - - done - - return 0 - - } - -clearcache=0 -exec 9</proc/cmdline -while read line <&9 -do - case "$line" in - *clearcache*) clearcache=1 - ;; - *) continue - ;; - esac -done -exec 9>&- - -if test -e /etc/volatile.cache -a "$VOLATILE_ENABLE_CACHE" = "yes" -a "x$1" != "xupdate" -a "x$clearcache" = "x0" -then - sh /etc/volatile.cache -else - rm -f /etc/volatile.cache - for file in `ls -1 "${CFGDIR}" | sort`; do - apply_cfgfile "${CFGDIR}/${file}" - done -fi - -if test -f /etc/ld.so.cache -a ! -f /var/run/ld.so.cache -then - ln -s /etc/ld.so.cache /var/run/ld.so.cache -fi diff --git a/meta/packages/initscripts/initscripts-1.0/reboot b/meta/packages/initscripts/initscripts-1.0/reboot deleted file mode 100755 index 4c55885ab..000000000 --- a/meta/packages/initscripts/initscripts-1.0/reboot +++ /dev/null @@ -1,15 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: reboot -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: 6 -# Short-Description: Execute the reboot command. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo -n "Rebooting... " -reboot -d -f -i diff --git a/meta/packages/initscripts/initscripts-1.0/rmnologin.sh b/meta/packages/initscripts/initscripts-1.0/rmnologin.sh deleted file mode 100755 index 417efc245..000000000 --- a/meta/packages/initscripts/initscripts-1.0/rmnologin.sh +++ /dev/null @@ -1,20 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: rmnologin -# Required-Start: $remote_fs $all -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: -# Short-Description: Remove /etc/nologin at boot -# Description: This script removes the /etc/nologin file as the -# last step in the boot process, if DELAYLOGIN=yes. -# If DELAYLOGIN=no, /etc/nologin was not created by -# bootmisc earlier in the boot process. -### END INIT INFO - -if test -f /etc/nologin.boot -then - rm -f /etc/nologin /etc/nologin.boot -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/save-rtc.sh b/meta/packages/initscripts/initscripts-1.0/save-rtc.sh deleted file mode 100644 index 75e43001b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/save-rtc.sh +++ /dev/null @@ -1,13 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: save-rtc -# Required-Start: -# Required-Stop: $local_fs hwclock -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Store system clock into file -# Description: -### END INIT INFO - -# Update the timestamp -date +%Y%m%d%2H%2M > /etc/timestamp2 diff --git a/meta/packages/initscripts/initscripts-1.0/sendsigs b/meta/packages/initscripts/initscripts-1.0/sendsigs deleted file mode 100755 index 2b0f8f363..000000000 --- a/meta/packages/initscripts/initscripts-1.0/sendsigs +++ /dev/null @@ -1,21 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: sendsigs -# Required-Start: -# Required-Stop: umountnfs -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Kill all remaining processes. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# Kill all processes. -echo "Sending all processes the TERM signal..." -killall5 -15 -sleep 5 -echo "Sending all processes the KILL signal..." -killall5 -9 - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/single b/meta/packages/initscripts/initscripts-1.0/single deleted file mode 100755 index 0cad693f2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/single +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: single -# Required-Start: $local_fs $all killprocs -# Required-Stop: -# Default-Start: 1 -# Default-Stop: -# Short-Description: executed by init(8) upon entering runlevel 1 (single). -### END INIT INFO - -PATH="/sbin:/bin:/usr/sbin:/usr/bin" - -# Kill all processes. -echo "Sending all processes the TERM signal..." -killall5 -15 -sleep 5 -echo "Sending all processes the KILL signal..." -killall5 -9 - -# We start update here, since we just killed it. -test -x /sbin/update && update - -echo "Entering single-user mode..." -exec init -t1 S diff --git a/meta/packages/initscripts/initscripts-1.0/sysfs.sh b/meta/packages/initscripts/initscripts-1.0/sysfs.sh deleted file mode 100644 index be28bb35b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/sysfs.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: mountvirtfs -# Required-Start: -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount kernel virtual file systems. -# Description: Mount initial set of virtual filesystems the kernel -# provides and that are required by everything. -### END INIT INFO - -if [ -e /proc ] && ! [ -e /proc/mounts ]; then - mount -t proc proc /proc -fi - -if [ -e /sys ] && grep -q sysfs /proc/filesystems; then - mount sysfs /sys -t sysfs -fi diff --git a/meta/packages/initscripts/initscripts-1.0/umountfs b/meta/packages/initscripts/initscripts-1.0/umountfs deleted file mode 100755 index 5c6793dc9..000000000 --- a/meta/packages/initscripts/initscripts-1.0/umountfs +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: umountfs -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Turn off swap and unmount all local file systems. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo "Deactivating swap..." -swapoff -a - -# We leave /proc mounted. -echo "Unmounting local filesystems..." -mount -o remount,ro /mnt/ram -umount -f -a -r - -mount -o remount,ro / - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/umountnfs.sh b/meta/packages/initscripts/initscripts-1.0/umountnfs.sh deleted file mode 100755 index a4fb821d9..000000000 --- a/meta/packages/initscripts/initscripts-1.0/umountnfs.sh +++ /dev/null @@ -1,32 +0,0 @@ -### BEGIN INIT INFO -# Provides: umountnfs -# Required-Start: -# Required-Stop: umountfs -# Should-Stop: $network $portmap -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Unmount all network filesystems -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# Write a reboot record to /var/log/wtmp before unmounting -halt -w - -echo "Unmounting remote filesystems..." - -test -f /etc/fstab && ( - -# -# Read through fstab line by line and unount network file systems -# -while read device mountpt fstype options -do - if test "$fstype" = nfs || test "$fstype" = smbfs || test "$fstype" = ncpfs - then - umount -f $mountpt - fi -done -) < /etc/fstab - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/urandom b/meta/packages/initscripts/initscripts-1.0/urandom deleted file mode 100755 index b6d807cf3..000000000 --- a/meta/packages/initscripts/initscripts-1.0/urandom +++ /dev/null @@ -1,46 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: urandom -# Required-Start: $local_fs mountvirtfs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Save and restore the random seed -# Description: Save the random seed on shutdown and restore it on boot, -# to ensure that the seed isn't predicable on startup -# (because the boot process is predictable) -### END INIT INFO - -test -c /dev/urandom || exit 0 -. /etc/default/rcS - -case "$1" in - start|"") - test "$VERBOSE" != no && echo "Initializing random number generator..." - # Load and then save 512 bytes, - # which is the size of the entropy pool - if test -f /var/lib/urandom/random-seed - then - cat /var/lib/urandom/random-seed >/dev/urandom - fi - rm -f /var/lib/urandom/random-seed - umask 077 - dd if=/dev/urandom of=/var/lib/urandom/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom start: failed." - umask 022 - ;; - stop) - # Carry a random seed from shut-down to start-up; - # see documentation in linux/drivers/char/random.c - test "$VERBOSE" != no && echo "Saving random seed..." - umask 077 - dd if=/dev/urandom of=/var/lib/urandom/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom stop: failed." - ;; - *) - echo "Usage: urandom {start|stop}" >&2 - exit 1 - ;; -esac - -exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/volatiles b/meta/packages/initscripts/initscripts-1.0/volatiles deleted file mode 100644 index b2ae2794d..000000000 --- a/meta/packages/initscripts/initscripts-1.0/volatiles +++ /dev/null @@ -1,39 +0,0 @@ -# This configuration file lists filesystem objects that should get verified -# during startup and be created if missing. -# -# Every line must either be a comment starting with # -# or a definition of format: -# <type> <owner> <group> <mode> <path> <linksource> -# where the items are separated by whitespace ! -# -# <type> : d|f|l : (d)irectory|(f)ile|(l)ink -# -# A linking example: -# l root root 0777 /var/test /tmp/testfile -# f root root 0644 /var/test none -# -# Understanding links: -# When populate-volatile is to verify/create a directory or file, it will first -# check it's existence. If a link is found to exist in the place of the target, -# the path of the target is replaced with the target the link points to. -# Thus, if a link is in the place to be verified, the object will be created -# in the place the link points to instead. -# This explains the order of "link before object" as in the example above, where -# a link will be created at /var/test pointing to /tmp/testfile and due to this -# link the file defined as /var/test will actually be created as /tmp/testfile. -d root root 0755 /var/volatile/cache none -d root root 1777 /var/volatile/lock none -d root root 0755 /var/volatile/log none -d root root 0755 /var/volatile/run none -d root root 1777 /var/volatile/tmp none -l root root 0755 /var/cache /var/volatile/cache -l root root 1777 /var/lock /var/volatile/lock -l root root 0755 /var/log /var/volatile/log -l root root 0755 /var/run /var/volatile/run -l root root 1777 /var/tmp /var/volatile/tmp -d root root 0755 /var/lock/subsys none -f root root 0664 /var/log/wtmp none -f root root 0664 /var/run/utmp none -l root root 0644 /etc/resolv.conf /var/run/resolv.conf -f root root 0644 /var/run/resolv.conf none - diff --git a/meta/packages/initscripts/initscripts_1.0.bb b/meta/packages/initscripts/initscripts_1.0.bb deleted file mode 100644 index 0d79b53a8..000000000 --- a/meta/packages/initscripts/initscripts_1.0.bb +++ /dev/null @@ -1,121 +0,0 @@ -DESCRIPTION = "SysV init scripts" -SECTION = "base" -PRIORITY = "required" -DEPENDS = "makedevs" -RDEPENDS = "makedevs" -LICENSE = "GPLv2" -PR = "r122" - -SRC_URI = "file://functions \ - file://halt \ - file://umountfs \ - file://devpts.sh \ - file://devpts \ - file://hostname.sh \ - file://mountall.sh \ - file://banner.sh \ - file://finish.sh \ - file://bootmisc.sh \ - file://mountnfs.sh \ - file://reboot \ - file://checkfs.sh \ - file://single \ - file://sendsigs \ - file://urandom \ - file://rmnologin.sh \ - file://checkroot.sh \ - file://umountnfs.sh \ - file://sysfs.sh \ - file://device_table.txt \ - file://populate-volatile.sh \ - file://volatiles \ - file://save-rtc.sh" - -SRC_URI_append_arm = " file://alignment.sh" - -KERNEL_VERSION = "" - -do_install () { -# -# Create directories and install device independent scripts -# - install -d ${D}${sysconfdir}/init.d - install -d ${D}${sysconfdir}/rcS.d - install -d ${D}${sysconfdir}/rc0.d - install -d ${D}${sysconfdir}/rc1.d - install -d ${D}${sysconfdir}/rc2.d - install -d ${D}${sysconfdir}/rc3.d - install -d ${D}${sysconfdir}/rc4.d - install -d ${D}${sysconfdir}/rc5.d - install -d ${D}${sysconfdir}/rc6.d - install -d ${D}${sysconfdir}/default - install -d ${D}${sysconfdir}/default/volatiles - - install -m 0644 ${WORKDIR}/functions ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/bootmisc.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/checkroot.sh ${D}${sysconfdir}/init.d -# install -m 0755 ${WORKDIR}/finish.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/halt ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/hostname.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/mountall.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/mountnfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/reboot ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/rmnologin.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/sendsigs ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/single ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/umountnfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/urandom ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/devpts.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/devpts ${D}${sysconfdir}/default - install -m 0755 ${WORKDIR}/sysfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/populate-volatile.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/save-rtc.sh ${D}${sysconfdir}/init.d - install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core - if [ "${TARGET_ARCH}" = "arm" ]; then - install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d - fi -# -# Install device dependent scripts -# - install -m 0755 ${WORKDIR}/banner.sh ${D}${sysconfdir}/init.d/banner.sh - install -m 0755 ${WORKDIR}/umountfs ${D}${sysconfdir}/init.d/umountfs -# -# Create runlevel links -# - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc2.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc3.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc4.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc5.d/S99rmnologin.sh - ln -sf ../init.d/sendsigs ${D}${sysconfdir}/rc6.d/S20sendsigs -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rc6.d/S30urandom - ln -sf ../init.d/umountnfs.sh ${D}${sysconfdir}/rc6.d/S31umountnfs.sh - ln -sf ../init.d/umountfs ${D}${sysconfdir}/rc6.d/S40umountfs - # udev will run at S55 if installed - ln -sf ../init.d/reboot ${D}${sysconfdir}/rc6.d/S90reboot - ln -sf ../init.d/sendsigs ${D}${sysconfdir}/rc0.d/S20sendsigs -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rc0.d/S30urandom - ln -sf ../init.d/umountnfs.sh ${D}${sysconfdir}/rc0.d/S31umountnfs.sh - ln -sf ../init.d/umountfs ${D}${sysconfdir}/rc0.d/S40umountfs - # udev will run at S55 if installed - ln -sf ../init.d/halt ${D}${sysconfdir}/rc0.d/S90halt - ln -sf ../init.d/save-rtc.sh ${D}${sysconfdir}/rc0.d/S25save-rtc.sh - ln -sf ../init.d/save-rtc.sh ${D}${sysconfdir}/rc6.d/S25save-rtc.sh - ln -sf ../init.d/banner.sh ${D}${sysconfdir}/rcS.d/S02banner.sh - ln -sf ../init.d/checkroot.sh ${D}${sysconfdir}/rcS.d/S10checkroot.sh -# ln -sf ../init.d/checkfs.sh ${D}${sysconfdir}/rcS.d/S30checkfs.sh - ln -sf ../init.d/mountall.sh ${D}${sysconfdir}/rcS.d/S35mountall.sh - ln -sf ../init.d/hostname.sh ${D}${sysconfdir}/rcS.d/S39hostname.sh - ln -sf ../init.d/mountnfs.sh ${D}${sysconfdir}/rcS.d/S45mountnfs.sh - ln -sf ../init.d/bootmisc.sh ${D}${sysconfdir}/rcS.d/S55bootmisc.sh -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rcS.d/S55urandom -# ln -sf ../init.d/finish.sh ${D}${sysconfdir}/rcS.d/S99finish.sh - # udev will run at S04 if installed - ln -sf ../init.d/sysfs.sh ${D}${sysconfdir}/rcS.d/S03sysfs.sh - ln -sf ../init.d/populate-volatile.sh ${D}${sysconfdir}/rcS.d/S37populate-volatile.sh - ln -sf ../init.d/devpts.sh ${D}${sysconfdir}/rcS.d/S38devpts.sh - if [ "${TARGET_ARCH}" = "arm" ]; then - ln -sf ../init.d/alignment.sh ${D}${sysconfdir}/rcS.d/S06alignment.sh - fi - - install -m 0755 ${WORKDIR}/device_table.txt ${D}${sysconfdir}/device_table -} |