diff options
Diffstat (limited to 'meta/packages/linux')
7 files changed, 602 insertions, 41 deletions
diff --git a/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch b/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch index 9ece71331..bf20f46a0 100644 --- a/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch +++ b/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch @@ -5,28 +5,38 @@ include/linux/serial_core.h | 1 + 4 files changed, 16 insertions(+), 3 deletions(-) -Index: git/drivers/serial/8250.c +Index: linux-2.6.20/drivers/serial/8250.c =================================================================== ---- git.orig/drivers/serial/8250.c 2006-10-31 16:29:50.000000000 +0000 -+++ git/drivers/serial/8250.c 2006-10-31 16:29:53.000000000 +0000 -@@ -2429,7 +2429,12 @@ static struct uart_driver serial8250_reg +--- linux-2.6.20.orig/drivers/serial/8250.c 2007-04-27 13:37:26.000000000 +0100 ++++ linux-2.6.20/drivers/serial/8250.c 2007-04-27 13:38:16.000000000 +0100 +@@ -2429,7 +2429,12 @@ .driver_name = "serial", .dev_name = "ttyS", .major = TTY_MAJOR, +#ifdef CONFIG_SERIAL_PXA -+ .minor = 64 + 3, -+ .name_base = 3, ++ .minor = 64 + 4, ++ .name_base = 4, +#else .minor = 64, +#endif .nr = UART_NR, .cons = SERIAL8250_CONSOLE, }; -Index: git/drivers/serial/serial_core.c +Index: linux-2.6.20/drivers/serial/serial_core.c =================================================================== ---- git.orig/drivers/serial/serial_core.c 2006-10-31 16:09:17.000000000 +0000 -+++ git/drivers/serial/serial_core.c 2006-10-31 16:29:53.000000000 +0000 -@@ -2183,6 +2183,7 @@ int uart_register_driver(struct uart_dri +--- linux-2.6.20.orig/drivers/serial/serial_core.c 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/drivers/serial/serial_core.c 2007-04-27 13:39:39.000000000 +0100 +@@ -2068,7 +2068,8 @@ + printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", + port->dev ? port->dev->bus_id : "", + port->dev ? ": " : "", +- drv->dev_name, port->line, address, port->irq, uart_type(port)); ++ drv->dev_name, port->line + drv->name_base, address, port->irq, ++ uart_type(port)); + } + + static void +@@ -2183,6 +2184,7 @@ normal->owner = drv->owner; normal->driver_name = drv->driver_name; normal->name = drv->dev_name; @@ -34,11 +44,11 @@ Index: git/drivers/serial/serial_core.c normal->major = drv->major; normal->minor_start = drv->minor; normal->type = TTY_DRIVER_TYPE_SERIAL; -Index: git/include/linux/serial_core.h +Index: linux-2.6.20/include/linux/serial_core.h =================================================================== ---- git.orig/include/linux/serial_core.h 2006-10-31 16:09:45.000000000 +0000 -+++ git/include/linux/serial_core.h 2006-10-31 16:30:36.000000000 +0000 -@@ -339,6 +339,7 @@ struct uart_driver { +--- linux-2.6.20.orig/include/linux/serial_core.h 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/include/linux/serial_core.h 2007-04-27 13:37:27.000000000 +0100 +@@ -341,6 +341,7 @@ struct module *owner; const char *driver_name; const char *dev_name; @@ -46,11 +56,11 @@ Index: git/include/linux/serial_core.h int major; int minor; int nr; -Index: git/drivers/serial/serial_cs.c +Index: linux-2.6.20/drivers/serial/serial_cs.c =================================================================== ---- git.orig/drivers/serial/serial_cs.c 2006-10-31 16:09:17.000000000 +0000 -+++ git/drivers/serial/serial_cs.c 2006-10-31 16:29:53.000000000 +0000 -@@ -390,7 +390,7 @@ static int setup_serial(struct pcmcia_de +--- linux-2.6.20.orig/drivers/serial/serial_cs.c 2007-02-04 18:44:54.000000000 +0000 ++++ linux-2.6.20/drivers/serial/serial_cs.c 2007-04-27 13:40:34.000000000 +0100 +@@ -390,7 +390,7 @@ kio_addr_t iobase, int irq) { struct uart_port port; @@ -59,12 +69,12 @@ Index: git/drivers/serial/serial_cs.c memset(&port, 0, sizeof (struct uart_port)); port.iobase = iobase; -@@ -411,10 +411,16 @@ static int setup_serial(struct pcmcia_de +@@ -411,10 +411,16 @@ return -EINVAL; } +#if CONFIG_SERIAL_PXA -+ linestart = 3; ++ linestart = 4; +#else + linestart = 0; +#endif diff --git a/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch b/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch index 8230d5339..da83fdf5e 100644 --- a/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch +++ b/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch @@ -298,7 +298,7 @@ Index: linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c + pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN); + ret = request_irq(REMOTE_IRQ_INT, + sharpsl_rc_interrupt, -+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SHARED, ++ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED, + "sharpsl_rc", + sharpsl_rc); + if (ret < 0) { diff --git a/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch b/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch new file mode 100644 index 000000000..b5439c62e --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch @@ -0,0 +1,17 @@ +Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c +=================================================================== +--- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:45:39.000000000 +0100 ++++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c 2007-07-07 12:47:30.000000000 +0100 +@@ -2666,6 +2666,12 @@ + iface = netdev_priv(dev); + local = iface->local; + ++ if(dev->base_addr == 0) ++ { ++ printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name); ++ return IRQ_HANDLED; ++ } ++ + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0); + + if (local->func->card_present && !local->func->card_present(local)) { diff --git a/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz b/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz index 3dd84eac4..ce9b90066 100644 --- a/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz +++ b/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz @@ -1778,3 +1778,4 @@ CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_SHARPSL_RC=m
\ No newline at end of file diff --git a/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch b/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch new file mode 100644 index 000000000..da83fdf5e --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch @@ -0,0 +1,519 @@ +Index: linux-2.6.20/arch/arm/mach-pxa/spitz.c +=================================================================== +--- linux-2.6.20.orig/arch/arm/mach-pxa/spitz.c ++++ linux-2.6.20/arch/arm/mach-pxa/spitz.c +@@ -244,6 +244,13 @@ static struct platform_device spitzkbd_d + .id = -1, + }; + ++/* ++ * Spitz Remote Control Device ++ */ ++static struct platform_device sharpsl_rc_device = { ++ .name = "sharpsl-remote-control", ++ .id = -1, ++}; + + /* + * Spitz LEDs +@@ -476,6 +483,7 @@ static struct platform_device *devices[] + &spitzscoop_device, + &spitzssp_device, + &spitzkbd_device, ++ &sharpsl_rc_device, + &spitzts_device, + &spitzbl_device, + &spitzled_device, +Index: linux-2.6.20/drivers/input/keyboard/Kconfig +=================================================================== +--- linux-2.6.20.orig/drivers/input/keyboard/Kconfig ++++ linux-2.6.20/drivers/input/keyboard/Kconfig +@@ -154,6 +154,17 @@ config KEYBOARD_SPITZ + To compile this driver as a module, choose M here: the + module will be called spitzkbd. + ++config SHARPSL_RC ++ tristate "Sharp SL-Cxx00 Remote Control" ++ depends on PXA_SHARPSL ++ default y ++ help ++ Say Y here to enable the remote on the Sharp Zaurus SL-Cxx00, ++ SL-C1000, SL-C3000 and Sl-C3100 series of PDAs. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called sharpsl_rc. ++ + config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA +Index: linux-2.6.20/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.20.orig/drivers/input/keyboard/Makefile ++++ linux-2.6.20/drivers/input/keyboard/Makefile +@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON) += newton + obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o + obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o + obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o ++obj-$(CONFIG_SHARPSL_RC) += sharpsl_rc.o + obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o + obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o + obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +Index: linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c +=================================================================== +--- /dev/null ++++ linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c +@@ -0,0 +1,291 @@ ++/* ++ * Keyboard driver for Sharp Clamshell Models (SL-Cxx00) ++ * ++ * Copyright (c) 2004-2005 Richard Purdie ++ * ++ * Based on corgikbd.c and Sharp's RC driver ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#define DEBUG 1 ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/init.h> ++#include <linux/input.h> ++#include <linux/interrupt.h> ++#include <linux/jiffies.h> ++#include <linux/module.h> ++#include <linux/slab.h> ++ ++#ifdef CONFIG_MACH_SPITZ ++#include <asm/arch/spitz.h> ++#endif ++#ifdef CONFIG_MACH_CORGI ++#include <asm/arch/corgi.h> ++#endif ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/hardware/scoop.h> ++#include <asm/arch/sharpsl.h> ++#include <asm/hardware/sharpsl_pm.h> ++ ++#define DPRINTK(fmt, args...) dev_dbg(data->dev, fmt "\n", ##args) ++ ++struct remote_control_key { ++ unsigned char min; ++ unsigned char max; ++ unsigned char key; ++}; ++ ++#ifdef CONFIG_MACH_SPITZ ++#define REMOTE_AKIN_PULLUP SPITZ_SCP2_AKIN_PULLUP ++#define REMOTE_SCOOP_DEVICE spitzscoop2_device ++#define REMOTE_GPIO_INT SPITZ_GPIO_AK_INT ++#define REMOTE_IRQ_INT SPITZ_IRQ_GPIO_AK_INT ++static struct remote_control_key remote_keys[] = { ++ { 25, 35, KEY_STOPCD}, ++ { 55, 65, KEY_PLAYPAUSE}, ++ { 85, 95, KEY_NEXTSONG}, ++ { 115, 125, KEY_VOLUMEUP}, ++ { 145, 155, KEY_PREVIOUSSONG}, ++ { 180, 190, KEY_MUTE}, ++ { 215, 225, KEY_VOLUMEDOWN}, ++}; ++#endif ++#ifdef CONFIG_MACH_CORGI ++#define REMOTE_AKIN_PULLUP CORGI_SCP_AKIN_PULLUP ++#define REMOTE_SCOOP_DEVICE corgiscoop_device ++#define REMOTE_GPIO_INT CORGI_GPIO_AK_INT ++#define REMOTE_IRQ_INT CORGI_IRQ_GPIO_AK_INT ++static struct remote_control_key remote_keys[] = { ++ //These need to be fixed for the CE-RH1's values ++ { 25, 35, KEY_STOPCD}, ++ { 55, 65, KEY_PLAYPAUSE}, ++ { 85, 95, KEY_NEXTSONG}, ++ { 115, 125, KEY_VOLUMEUP}, ++ { 145, 155, KEY_PREVIOUSSONG}, ++ { 180, 190, KEY_MUTE}, ++ { 215, 225, KEY_VOLUMEDOWN}, ++}; ++#endif ++ ++#define RELEASE_HI 230 ++#define MAX_EARPHONE 6 ++#define RC_POLL_MS 10 ++#define RC_FINISH_MS 500 ++#define WAIT_STATE 3 ++#define NOISE_THRESHOLD 100 ++ ++struct sharpsl_rc { ++ struct input_dev *input; ++ struct device *dev; ++ ++ spinlock_t lock; ++ struct timer_list rctimer; ++ struct timer_list rctimer_finish; ++ ++ unsigned int handling_press; ++ unsigned int noise; ++ unsigned int state; ++ unsigned int last_key; ++}; ++ ++static int get_remocon_raw(void) ++{ ++ int i, val; ++ ++ val = sharpsl_pm_pxa_read_max1111(MAX1111_REMCOM); ++ for (i = 0; i < ARRAY_SIZE(remote_keys); ++i) { ++ if (val >= remote_keys[i].min ++ && val <= remote_keys[i].max) { ++ printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key); ++ return remote_keys[i].key; ++ } ++ } ++ return 0; ++} ++ ++static irqreturn_t sharpsl_rc_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct sharpsl_rc *data = dev_id; ++ DPRINTK("sharpsl_rc_interrupt %d\n", irq); ++ if (!data->handling_press) { ++ DPRINTK("handling interrupt"); ++ data->handling_press = 1; ++ data->noise = 0; ++ data->state = 0; ++ data->last_key = 0; ++ ++ reset_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP); ++ ++ mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS)); ++ } ++ return IRQ_HANDLED; ++} ++ ++static void sharpsl_rc_timer_callback(unsigned long dataPtr) ++{ ++ struct sharpsl_rc *data = (struct sharpsl_rc *) dataPtr; ++ int timer = 1; ++ int key = get_remocon_raw(); ++ DPRINTK("timer callback, key: %d", key); ++ ++ //wait for value to stabilize ++ if (data->state < WAIT_STATE) { ++ if (data->last_key != key) { ++ ++data->noise; ++ if (data->noise > NOISE_THRESHOLD) { ++ DPRINTK("too much noise, bailing"); ++ timer = 0; ++ } ++ data->state = 0; ++ } else { ++ ++data->state; ++ } ++ data->last_key = key; ++ ++ //stable value, send event ++ } else if (data->state == WAIT_STATE) { ++ data->noise = 0; ++ //non-key returned, skip the rest of the states and bail now ++ if (data->last_key == 0) { ++ DPRINTK("non-key detected %d, noise: %d", data->last_key, data->noise); ++ timer = 0; ++ //send button press ++ } else { ++ DPRINTK("key press detected %d, noise %d", data->last_key, data->noise); ++ input_report_key(data->input, data->last_key, 1); ++ } ++ ++data->state; ++ ++ //wait until key is released ++ } else if (data->state < WAIT_STATE * 2) { ++ if (key == data->last_key ++ && data->noise < NOISE_THRESHOLD) { ++ data->state = WAIT_STATE + 1; ++ ++data->noise; ++ } else { ++ ++data->state; ++ } ++ //key is released, send event ++ } else { ++ //send button release ++ DPRINTK("release key %d", data->last_key); ++ input_report_key(data->input, data->last_key, 0); ++ timer = 0; ++ } ++ if (timer) { ++ mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS)); ++ } else { ++ set_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP); ++ data->handling_press = 0; ++ } ++} ++ ++static int __init sharpsl_rc_probe(struct platform_device *pdev) ++{ ++ struct sharpsl_rc *sharpsl_rc; ++ struct input_dev *input_dev; ++ int i, ret; ++ ++ dev_dbg(&pdev->dev, "sharpsl_rc_probe\n"); ++ ++ sharpsl_rc = kzalloc(sizeof(struct sharpsl_rc), GFP_KERNEL); ++ input_dev = input_allocate_device(); ++ if (!sharpsl_rc || !input_dev) { ++ kfree(sharpsl_rc); ++ input_free_device(input_dev); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, sharpsl_rc); ++ ++ sharpsl_rc->dev = &pdev->dev; ++ sharpsl_rc->input = input_dev; ++ spin_lock_init(&sharpsl_rc->lock); ++ ++ /* Init Remote Control Timer */ ++ init_timer(&sharpsl_rc->rctimer); ++ sharpsl_rc->rctimer.function = sharpsl_rc_timer_callback; ++ sharpsl_rc->rctimer.data = (unsigned long) sharpsl_rc; ++ ++ input_dev->name = "Sharp Remote Control CE-RHX"; ++ input_dev->phys = "sharpsl_rc/input0"; ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->id.vendor = 0x0001; ++ input_dev->id.product = 0x0001; ++ input_dev->id.version = 0x0100; ++ input_dev->cdev.dev = &pdev->dev; ++ input_dev->private = sharpsl_rc; ++ ++ input_dev->evbit[0] = BIT(EV_KEY); ++ ++ for (i = 0; i <= ARRAY_SIZE(remote_keys); i++) ++ set_bit(remote_keys[i].key, input_dev->keybit); ++ ++ input_register_device(sharpsl_rc->input); ++ ++ pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN); ++ ret = request_irq(REMOTE_IRQ_INT, ++ sharpsl_rc_interrupt, ++ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED, ++ "sharpsl_rc", ++ sharpsl_rc); ++ if (ret < 0) { ++ dev_dbg(&pdev->dev, "Can't get IRQ: %d!\n", i); ++ kfree(sharpsl_rc); ++ input_free_device(input_dev); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int sharpsl_rc_remove(struct platform_device *pdev) ++{ ++ struct sharpsl_rc *sharpsl_rc = platform_get_drvdata(pdev); ++ ++ dev_dbg(&pdev->dev, "sharpsl_rc_remove\n"); ++ ++ free_irq(REMOTE_IRQ_INT, sharpsl_rc); ++ del_timer_sync(&sharpsl_rc->rctimer); ++ input_unregister_device(sharpsl_rc->input); ++ kfree(sharpsl_rc); ++ ++ return 0; ++} ++ ++static struct platform_driver sharpsl_rc_driver = { ++ .probe = sharpsl_rc_probe, ++ .remove = sharpsl_rc_remove, ++ .suspend = NULL, ++ .resume = NULL, ++ .driver = { ++ .name = "sharpsl-remote-control", ++ }, ++}; ++ ++static int __devinit sharpsl_rc_init(void) ++{ ++ printk("sharpsl_rc_init\n"); ++ return platform_driver_register(&sharpsl_rc_driver); ++} ++ ++static void __exit sharpsl_rc_exit(void) ++{ ++ printk("sharpsl_rc_exit\n"); ++ platform_driver_unregister(&sharpsl_rc_driver); ++} ++ ++module_init(sharpsl_rc_init); ++module_exit(sharpsl_rc_exit); ++ ++MODULE_AUTHOR("Justin Patrin <papercrane@reversefold.com>"); ++MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>"); ++MODULE_DESCRIPTION("SharpSL Remote Control Driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.20/drivers/input/keyboard/spitzkbd.c +=================================================================== +--- linux-2.6.20.orig/drivers/input/keyboard/spitzkbd.c ++++ linux-2.6.20/drivers/input/keyboard/spitzkbd.c +@@ -19,6 +19,7 @@ + #include <linux/jiffies.h> + #include <linux/module.h> + #include <linux/slab.h> ++#include <linux/kmod.h> + + #include <asm/arch/spitz.h> + #include <asm/arch/hardware.h> +@@ -279,13 +280,21 @@ static irqreturn_t spitzkbd_hinge_isr(in + static int sharpsl_hinge_state; + static int hinge_count; + ++void spitzkbd_handle_sharpsl_rc(void *arg) { ++ request_module("sharpsl_rc"); ++} ++ ++DECLARE_WORK(spitzkbd_work, spitzkbd_handle_sharpsl_rc); ++ + static void spitzkbd_hinge_timer(unsigned long data) + { + struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data; + unsigned long state; + unsigned long flags; ++ unsigned int headphone, remote; + + state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB)); ++ state |= (GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN)); + state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)); + if (state != sharpsl_hinge_state) { + hinge_count = 0; +@@ -299,9 +308,18 @@ static void spitzkbd_hinge_timer(unsigne + + input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0)); + input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0)); +- input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0)); ++ ++ headphone = ((GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN)) != 0); ++ input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, headphone); ++ ++ remote = headphone && ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) == 0); ++ input_report_switch(spitzkbd_data->input, SW_REMOTE_INSERT, remote); + input_sync(spitzkbd_data->input); + ++ if (remote) { ++ schedule_work(&spitzkbd_work); ++ } ++ + spin_unlock_irqrestore(&spitzkbd_data->lock, flags); + } else { + mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL)); +@@ -394,6 +412,7 @@ static int __init spitzkbd_probe(struct + set_bit(SW_LID, input_dev->swbit); + set_bit(SW_TABLET_MODE, input_dev->swbit); + set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); ++ set_bit(SW_REMOTE_INSERT, input_dev->swbit); + + err = input_register_device(input_dev); + if (err) +@@ -431,9 +450,12 @@ static int __init spitzkbd_probe(struct + request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "Spitzkbd SWB", spitzkbd); +- request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr, ++ request_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd_hinge_isr, + IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "Spitzkbd HP", spitzkbd); ++ request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr, ++ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED, ++ "Spitzkbd HP Type", spitzkbd); + + return 0; + +@@ -454,6 +476,7 @@ static int spitzkbd_remove(struct platfo + free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd); + free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd); + free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd); ++ free_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd); + free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd); + + del_timer_sync(&spitzkbd->htimer); +Index: linux-2.6.20/arch/arm/mach-pxa/sharpsl.h +=================================================================== +--- linux-2.6.20.orig/arch/arm/mach-pxa/sharpsl.h ++++ linux-2.6.20/arch/arm/mach-pxa/sharpsl.h +@@ -50,15 +50,10 @@ void spitz_wait_hsync(void); + + #define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x)) + +-/* MAX1111 Channel Definitions */ +-#define MAX1111_BATT_VOLT 4u +-#define MAX1111_BATT_TEMP 2u +-#define MAX1111_ACIN_VOLT 6u +- + extern struct battery_thresh spitz_battery_levels_acin[]; + extern struct battery_thresh spitz_battery_levels_noac[]; + void sharpsl_pm_pxa_init(void); + void sharpsl_pm_pxa_remove(void); +-int sharpsl_pm_pxa_read_max1111(int channel); ++ + + +Index: linux-2.6.20/arch/arm/mach-pxa/sharpsl_pm.c +=================================================================== +--- linux-2.6.20.orig/arch/arm/mach-pxa/sharpsl_pm.c ++++ linux-2.6.20/arch/arm/mach-pxa/sharpsl_pm.c +@@ -135,6 +135,8 @@ int sharpsl_pm_pxa_read_max1111(int chan + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); + } + ++EXPORT_SYMBOL(sharpsl_pm_pxa_read_max1111); ++ + void sharpsl_pm_pxa_init(void) + { + pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN); +Index: linux-2.6.20/include/asm-arm/hardware/sharpsl_pm.h +=================================================================== +--- linux-2.6.20.orig/include/asm-arm/hardware/sharpsl_pm.h ++++ linux-2.6.20/include/asm-arm/hardware/sharpsl_pm.h +@@ -104,3 +104,10 @@ irqreturn_t sharpsl_ac_isr(int irq, void + irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id); + irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id); + ++/* MAX1111 Channel Definitions */ ++#define MAX1111_REMCOM 0u ++#define MAX1111_BATT_VOLT 4u ++#define MAX1111_BATT_TEMP 2u ++#define MAX1111_ACIN_VOLT 6u ++ ++int sharpsl_pm_pxa_read_max1111(int channel); +Index: linux-2.6.20/include/linux/input.h +=================================================================== +--- linux-2.6.20.orig/include/linux/input.h ++++ linux-2.6.20/include/linux/input.h +@@ -602,6 +602,7 @@ struct input_absinfo { + #define SW_LID 0x00 /* set = lid shut */ + #define SW_TABLET_MODE 0x01 /* set = tablet mode */ + #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ ++#define SW_REMOTE_INSERT 0x04 /* set = remote */ + #define SW_MAX 0x0f + + /* +Index: linux-2.6.20/arch/arm/mach-pxa/spitz_pm.c +=================================================================== +--- linux-2.6.20.orig/arch/arm/mach-pxa/spitz_pm.c ++++ linux-2.6.20/arch/arm/mach-pxa/spitz_pm.c +@@ -161,6 +161,13 @@ static int spitz_should_wakeup(unsigned + if (resume_on_alarm && (PEDR & PWER_RTC)) + is_resume |= PWER_RTC; + ++ printk("wakeup: PEDR: %x, PKSR: %x, HP_IN: %x, AK_INT: %x\n", PEDR, PKSR, GPIO_bit(SPITZ_GPIO_HP_IN), GPIO_bit(SPITZ_GPIO_AK_INT)); ++ ++ //remote/headphone interrupt, wakeup ++ if (PEDR == 0 && (PKSR & 0xc0d01) != 0) { ++ is_resume |= PWER_RTC; ++ } ++ + dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume); + return is_resume; + } diff --git a/meta/packages/linux/linux-rp.inc b/meta/packages/linux/linux-rp.inc index 10a484745..aa40ee304 100644 --- a/meta/packages/linux/linux-rp.inc +++ b/meta/packages/linux/linux-rp.inc @@ -17,10 +17,16 @@ EXTRA_OEMAKE = "OPENZAURUS_RELEASE=-${DISTRO_VERSION}" COMPATIBLE_HOST = "(arm|i.86).*-linux" COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal)' +KERNEL_CUSTOM_NAME ?= "" +KERNEL_DEPLOY_NAME ?= "${KERNEL_IMAGETYPE}-${PV}-${KERNEL_CUSTOM_NAME}${MACHINE}-${DATETIME}.bin" +KERNEL_SYMLINK_NAME ?= "${KERNEL_IMAGETYPE}-${KERNEL_CUSTOM_NAME}${MACHINE}.bin" +KERNEL_DEFCONFIG ?= "defconfig-${MACHINE}" + CMDLINE_CON = "console=ttyS0,115200n8 console=tty1 noinitrd" +CMDLINE_CON_collie = "console=ttySA0,115200n8 console=tty1 noinitrd" CMDLINE_CON_qemuarm = "console=ttyAMA0,115200n8 console=tty1 noinitrd" -CMDLINE_ROOT = "root=/dev/mtdblock2 rootfstype=jffs2" -CMDLINE_ROOT_spitz = "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw" +CMDLINE_ROOT ?= "root=/dev/mtdblock2 rootfstype=jffs2" +CMDLINE_ROOT_spitz ?= "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw" #CMDLINE_ROOT_spitz = "root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 rw" CMDLINE_OTHER = "dyntick=enable" CMDLINE_DEBUG = '${@base_contains("IMAGE_FEATURES", "debug-tweaks", "debug", "quiet", d)}' @@ -53,6 +59,8 @@ module_autoload_snd-soc-corgi_c7x0 = "snd-soc-corgi" module_autoload_snd-soc-spitz_akita = "snd-soc-spitz" module_autoload_snd-soc-spitz_spitz = "snd-soc-spitz" module_autoload_snd-soc-poodle_poodle = "snd-soc-poodle" +module_autoload_locomo-spi_collie = "locomo-spi" +module_autoload_mmc_block_collie = "mmc_block" do_configure() { rm -f ${S}/.config @@ -64,7 +72,7 @@ do_configure() { fi fi - if [ ! -e ${WORKDIR}/defconfig-${MACHINE} ]; then + if [ ! -e ${WORKDIR}/${KERNEL_DEFCONFIG} ]; then die "No default configuration for ${MACHINE} available." fi @@ -105,7 +113,7 @@ do_configure() { echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config fi - if [ "${DISTRO}" = "openzaurus" ]; then + if [ "${DISTRO}" = "openzaurus" -a "${MACHINE}" != "collie" ]; then case ${MACHINE} in c7x0 | akita | spitz ) echo "CONFIG_LOGO_OZ640_CLUT224=y" >> ${S}/.config @@ -126,7 +134,7 @@ do_configure() { echo "CONFIG_LOGO=y" >> ${S}/.config echo "# CONFIG_LOGO_LINUX_CLUT224 is not set" >> ${S}/.config echo "# CONFIG_LOGO_OHAND_CLUT224 is not set" >> ${S}/.config - elif [ "${DISTRO}" = "poky" ]; then + elif [ "${DISTRO}" = "poky" -a "${MACHINE}" != "collie" ]; then echo "CONFIG_LOGO=y" >> ${S}/.config echo "CONFIG_LOGO_OHAND_CLUT224=y" >> ${S}/.config echo "# CONFIG_LOGO_OZ240_CLUT224 is not set" >> ${S}/.config @@ -155,7 +163,7 @@ do_configure() { -e '/CONFIG_LOGO_OZ240_CLUT224=/d' \ -e '/CONFIG_LOGO_OZ480_CLUT224=/d' \ -e '/CONFIG_LOGO_OZ640_CLUT224=/d' \ - '${WORKDIR}/defconfig-${MACHINE}' >>'${S}/.config' + '${WORKDIR}/${KERNEL_DEFCONFIG}' >>'${S}/.config' yes '' | oe_runmake oldconfig } @@ -186,11 +194,11 @@ do_compile_append() { do_deploy() { install -d ${DEPLOY_DIR_IMAGE} - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin - rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin + install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_DEPLOY_NAME} cd ${DEPLOY_DIR_IMAGE} - ln -s ${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin ${KERNEL_IMAGETYPE}-${MACHINE}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib + rm -f ${KERNEL_SYMLINK_NAME} + ln -s ${KERNEL_DEPLOY_NAME} ${KERNEL_SYMLINK_NAME} + tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib } do_deploy[dirs] = "${S}" diff --git a/meta/packages/linux/linux-rp_2.6.21.bb b/meta/packages/linux/linux-rp_2.6.21.bb index 682ab308e..3f155942e 100644 --- a/meta/packages/linux/linux-rp_2.6.21.bb +++ b/meta/packages/linux/linux-rp_2.6.21.bb @@ -1,6 +1,6 @@ require linux-rp.inc -PR = "r7" +PR = "r10" # Handy URLs # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 @@ -49,8 +49,10 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \ ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \ file://pxa-serial-hack.patch;patch=1;status=hack \ file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \ + file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \ file://squashfs3.0-2.6.15.patch;patch=1;status=external \ file://vesafb-tng-1.0-rc2-2.6.20-rc2.patch;patch=1;status=external \ + file://sharpsl-rc-r1.patch;patch=1 \ file://defconfig-c7x0 \ file://defconfig-hx2000 \ file://defconfig-collie \ @@ -72,16 +74,20 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \ # (Pavel Machek's git tree has updated versions of this?) # ${JLSRC}/zaurus-lcd-2.6.11.diff.gz;patch=1 -# These patches are extracted from Pavel Machek's git tree -# (diff against vanilla kernel) SRC_URI_append_collie = "\ - ${DOSRC}/collie/mtd-sharp-flash-hack-r0.patch;patch=1 \ - ${DOSRC}/collie/collie-r0.patch;patch=1 \ - ${DOSRC}/collie/locomolcd-backlight-r0.patch;patch=1 \ - ${DOSRC}/collie/ucb1x00-touch-audio-r0.patch;patch=1 \ - file://collie-mcp-r1.patch;patch=1 \ - ${DOSRC}/collie/sa1100-udc-r0.patch;patch=1 \ -# ${DOSRC}/collie/collie-pm-r1.patch;patch=1 \ + ${TKSRC}/mtd-sharp-flash-hack-r2.patch;patch=1 \ + ${TKSRC}/ucb1x00-touch-audio-r1.patch;patch=1 \ + ${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \ + ${TKSRC}/sa1100-udc-r2.patch;patch=1 \ + ${TKSRC}/mmc_spi-r4.patch;patch=1 \ + ${TKSRC}/locomo-r0.patch;patch=1 \ + ${TKSRC}/collie-kexec.patch;patch=1 \ + ${TKSRC}/locomo_spi-r4.patch;patch=1 \ + ${TKSRC}/sharpsl_pm-r2.patch;patch=1 \ + ${TKSRC}/collie_pm-r2.patch;patch=1 \ + ${TKSRC}/locomokeyb_suspendkey-2.patch;patch=1 \ + ${TKSRC}/pcmcia_suspend.patch;patch=1 \ + ${TKSRC}/ucb1x00_suspend.patch;patch=1 \ " SRC_URI_append_tosa = "\ |