summaryrefslogtreecommitdiff
path: root/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch')
-rw-r--r--meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch2248
1 files changed, 0 insertions, 2248 deletions
diff --git a/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch b/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
deleted file mode 100644
index 7c70244b3..000000000
--- a/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-20061030-neo1973.patch
+++ /dev/null
@@ -1,2248 +0,0 @@
-This patch adds neo1973 'board' (FIC Neo1973 phone) support to u-boot.
-Specifically, it adds support for the GTA01v3, GTA01v4, GTA01Bv2 and
-GTA01Bv3 hardware revisions.
-
-Signed-off-by: Harald Welte <laforge@openmoko.org>
-
-Index: u-boot/Makefile
-===================================================================
---- u-boot.orig/Makefile
-+++ u-boot/Makefile
-@@ -2009,6 +2009,14 @@
- sbc2410x_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-+gta01_config \
-+gta01v3_config \
-+gta01bv2_config \
-+gta01bv3_config \
-+gta01bv4_config \
-+gta01v4_config : unconfig
-+ @sh board/neo1973/gta01/split_by_variant.sh $@
-+
- qt2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-
-Index: u-boot/common/main.c
-===================================================================
---- u-boot.orig/common/main.c
-+++ u-boot/common/main.c
-@@ -61,6 +61,7 @@
- #undef DEBUG_PARSER
-
- char console_buffer[CFG_CBSIZE]; /* console I/O buffer */
-+int nobootdelay;
-
- #ifndef CONFIG_CMDLINE_EDITING
- static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
-@@ -376,7 +377,7 @@
-
- debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
-
-- if (bootdelay >= 0 && s && !abortboot (bootdelay)) {
-+ if (!nobootdelay && bootdelay >= 0 && s && !abortboot (bootdelay)) {
- # ifdef CONFIG_AUTOBOOT_KEYED
- int prev = disable_ctrlc(1); /* disable Control C checking */
- # endif
-Index: u-boot/drivers/Makefile
-===================================================================
---- u-boot.orig/drivers/Makefile
-+++ u-boot/drivers/Makefile
-@@ -50,6 +50,7 @@
- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
- videomodes.o w83c553f.o \
- ks8695eth.o \
-+ pcf50606.o \
- pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
- rpx_pcmcia.o \
- fsl_i2c.o s3c2410_fb.o
-Index: u-boot/drivers/pcf50606.c
-===================================================================
---- /dev/null
-+++ u-boot/drivers/pcf50606.c
-@@ -0,0 +1,112 @@
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_DRIVER_PCF50606
-+
-+#include <i2c.h>
-+#include <pcf50606.h>
-+#include <asm/atomic.h>
-+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-+
-+#define PCF50606_I2C_ADDR 0x08
-+
-+void __pcf50606_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+ i2c_write(PCF50606_I2C_ADDR, reg, 1, &val, 1);
-+}
-+
-+u_int8_t __pcf50606_reg_read(u_int8_t reg)
-+{
-+ u_int8_t tmp;
-+ i2c_read(PCF50606_I2C_ADDR, reg, 1, &tmp, 1);
-+ return tmp;
-+}
-+
-+void pcf50606_reg_write(u_int8_t reg, u_int8_t val)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+ __pcf50606_reg_write(reg, val);
-+ local_irq_restore(flags);
-+}
-+
-+u_int8_t pcf50606_reg_read(u_int8_t reg)
-+{
-+ unsigned long flags;
-+ u_int8_t tmp;
-+
-+ local_irq_save(flags);
-+ tmp = __pcf50606_reg_read(reg);
-+ local_irq_restore(flags);
-+
-+ return tmp;
-+}
-+
-+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val)
-+{
-+ unsigned long flags;
-+ u_int8_t tmp;
-+
-+ local_irq_save(flags);
-+ tmp = __pcf50606_reg_read(reg);
-+ __pcf50606_reg_write(reg, (val & mask) | (tmp & ~mask));
-+ local_irq_restore(flags);
-+}
-+
-+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits)
-+{
-+ unsigned long flags;
-+ u_int8_t tmp;
-+
-+ local_irq_save(flags);
-+ tmp = pcf50606_reg_read(reg);
-+ pcf50606_reg_write(reg, (tmp & ~bits));
-+ local_irq_restore(flags);
-+}
-+
-+static const u_int8_t regs_valid[] = {
-+ PCF50606_REG_OOCS, PCF50606_REG_INT1M, PCF50606_REG_INT2M,
-+ PCF50606_REG_INT3M, PCF50606_REG_OOCC1, PCF50606_REG_OOCC2,
-+ PCF50606_REG_PSSC, PCF50606_REG_PWROKM, PCF50606_REG_DCDC1,
-+ PCF50606_REG_DCDC2, PCF50606_REG_DCDC3, PCF50606_REG_DCDC4,
-+ PCF50606_REG_DCDEC1, PCF50606_REG_DCDEC2, PCF50606_REG_DCUDC1,
-+ PCF50606_REG_DCUDC2, PCF50606_REG_IOREGC, PCF50606_REG_D1REGC1,
-+ PCF50606_REG_D2REGC1, PCF50606_REG_D3REGC1, PCF50606_REG_LPREGC1,
-+ PCF50606_REG_LPREGC2, PCF50606_REG_MBCC1, PCF50606_REG_MBCC2,
-+ PCF50606_REG_MBCC3, PCF50606_REG_BBCC, PCF50606_REG_ADCC1,
-+ PCF50606_REG_ADCC2, PCF50606_REG_ACDC1, PCF50606_REG_BVMC,
-+ PCF50606_REG_PWMC1, PCF50606_REG_LEDC1, PCF50606_REG_LEDC2,
-+ PCF50606_REG_GPOC1, PCF50606_REG_GPOC2, PCF50606_REG_GPOC3,
-+ PCF50606_REG_GPOC4, PCF50606_REG_GPOC5,
-+};
-+
-+
-+/* initialize PCF50606 register set */
-+void pcf50606_init(void)
-+{
-+ unsigned long flags;
-+ int i;
-+
-+ local_irq_save(flags);
-+ for (i = 0; i < ARRAY_SIZE(regs_valid); i++) {
-+ __pcf50606_reg_write(regs_valid[i],
-+ pcf50606_initial_regs[regs_valid[i]]);
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+void pcf50606_charge_autofast(int on)
-+{
-+ if (on) {
-+ printf("Enabling automatic fast charge\n");
-+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+ PCF50606_MBCC1_AUTOFST,
-+ PCF50606_MBCC1_AUTOFST);
-+ } else {
-+ printf("Disabling fast charge\n");
-+ pcf50606_reg_write(PCF50606_REG_MBCC1, 0x00);
-+ }
-+}
-+
-+#endif /* CONFIG DRIVER_PCF50606 */
-Index: u-boot/include/pcf50606.h
-===================================================================
---- /dev/null
-+++ u-boot/include/pcf50606.h
-@@ -0,0 +1,273 @@
-+#ifndef _PCF50606_H
-+#define _PCF50606_H
-+
-+/* Philips PCF50606 Power Managemnt Unit (PMU) driver
-+ * (C) 2006-2007 by OpenMoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ */
-+
-+enum pfc50606_regs {
-+ PCF50606_REG_ID = 0x00,
-+ PCF50606_REG_OOCS = 0x01,
-+ PCF50606_REG_INT1 = 0x02, /* Interrupt Status */
-+ PCF50606_REG_INT2 = 0x03, /* Interrupt Status */
-+ PCF50606_REG_INT3 = 0x04, /* Interrupt Status */
-+ PCF50606_REG_INT1M = 0x05, /* Interrupt Mask */
-+ PCF50606_REG_INT2M = 0x06, /* Interrupt Mask */
-+ PCF50606_REG_INT3M = 0x07, /* Interrupt Mask */
-+ PCF50606_REG_OOCC1 = 0x08,
-+ PCF50606_REG_OOCC2 = 0x09,
-+ PCF50606_REG_RTCSC = 0x0a, /* Second */
-+ PCF50606_REG_RTCMN = 0x0b, /* Minute */
-+ PCF50606_REG_RTCHR = 0x0c, /* Hour */
-+ PCF50606_REG_RTCWD = 0x0d, /* Weekday */
-+ PCF50606_REG_RTCDT = 0x0e, /* Day */
-+ PCF50606_REG_RTCMT = 0x0f, /* Month */
-+ PCF50606_REG_RTCYR = 0x10, /* Year */
-+ PCF50606_REG_RTCSCA = 0x11, /* Alarm Second */
-+ PCF50606_REG_RTCMNA = 0x12, /* Alarm Minute */
-+ PCF50606_REG_RTCHRA = 0x13, /* Alarm Hour */
-+ PCF50606_REG_RTCWDA = 0x14, /* Alarm Weekday */
-+ PCF50606_REG_RTCDTA = 0x15, /* Alarm Day */
-+ PCF50606_REG_RTCMTA = 0x16, /* Alarm Month */
-+ PCF50606_REG_RTCYRA = 0x17, /* Alarm Year */
-+ PCF50606_REG_PSSC = 0x18, /* Power sequencing */
-+ PCF50606_REG_PWROKM = 0x19, /* PWROK mask */
-+ PCF50606_REG_PWROKS = 0x1a, /* PWROK status */
-+ PCF50606_REG_DCDC1 = 0x1b,
-+ PCF50606_REG_DCDC2 = 0x1c,
-+ PCF50606_REG_DCDC3 = 0x1d,
-+ PCF50606_REG_DCDC4 = 0x1e,
-+ PCF50606_REG_DCDEC1 = 0x1f,
-+ PCF50606_REG_DCDEC2 = 0x20,
-+ PCF50606_REG_DCUDC1 = 0x21,
-+ PCF50606_REG_DCUDC2 = 0x22,
-+ PCF50606_REG_IOREGC = 0x23,
-+ PCF50606_REG_D1REGC1 = 0x24,
-+ PCF50606_REG_D2REGC1 = 0x25,
-+ PCF50606_REG_D3REGC1 = 0x26,
-+ PCF50606_REG_LPREGC1 = 0x27,
-+ PCF50606_REG_LPREGC2 = 0x28,
-+ PCF50606_REG_MBCC1 = 0x29,
-+ PCF50606_REG_MBCC2 = 0x2a,
-+ PCF50606_REG_MBCC3 = 0x2b,
-+ PCF50606_REG_MBCS1 = 0x2c,
-+ PCF50606_REG_BBCC = 0x2d,
-+ PCF50606_REG_ADCC1 = 0x2e,
-+ PCF50606_REG_ADCC2 = 0x2f,
-+ PCF50606_REG_ADCS1 = 0x30,
-+ PCF50606_REG_ADCS2 = 0x31,
-+ PCF50606_REG_ADCS3 = 0x32,
-+ PCF50606_REG_ACDC1 = 0x33,
-+ PCF50606_REG_BVMC = 0x34,
-+ PCF50606_REG_PWMC1 = 0x35,
-+ PCF50606_REG_LEDC1 = 0x36,
-+ PCF50606_REG_LEDC2 = 0x37,
-+ PCF50606_REG_GPOC1 = 0x38,
-+ PCF50606_REG_GPOC2 = 0x39,
-+ PCF50606_REG_GPOC3 = 0x3a,
-+ PCF50606_REG_GPOC4 = 0x3b,
-+ PCF50606_REG_GPOC5 = 0x3c,
-+ __NUM_PCF50606_REGS
-+};
-+
-+enum pcf50606_reg_oocs {
-+ PFC50606_OOCS_ONKEY = 0x01,
-+ PCF50606_OOCS_EXTON = 0x02,
-+ PCF50606_OOCS_PWROKRST = 0x04,
-+ PCF50606_OOCS_BATOK = 0x08,
-+ PCF50606_OOCS_BACKOK = 0x10,
-+ PCF50606_OOCS_CHGOK = 0x20,
-+ PCF50606_OOCS_TEMPOK = 0x40,
-+ PCF50606_OOCS_WDTEXP = 0x80,
-+};
-+
-+enum pcf50606_reg_oocc1 {
-+ PCF50606_OOCC1_GOSTDBY = 0x01,
-+ PCF50606_OOCC1_TOTRST = 0x02,
-+ PCF50606_OOCC1_CLK32ON = 0x04,
-+ PCF50606_OOCC1_WDTRST = 0x08,
-+ PCF50606_OOCC1_RTCWAK = 0x10,
-+ PCF50606_OOCC1_CHGWAK = 0x20,
-+ PCF50606_OOCC1_EXTONWAK_HIGH = 0x40,
-+ PCF50606_OOCC1_EXTONWAK_LOW = 0x80,
-+ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP = 0x3f,
-+};
-+
-+enum pcf50606_reg_oocc2 {
-+ PCF50606_OOCC2_ONKEYDB_NONE = 0x00,
-+ PCF50606_OOCC2_ONKEYDB_14ms = 0x01,
-+ PCF50606_OOCC2_ONKEYDB_62ms = 0x02,
-+ PCF50606_OOCC2_ONKEYDB_500ms = 0x03,
-+ PCF50606_OOCC2_EXTONDB_NONE = 0x00,
-+ PCF50606_OOCC2_EXTONDB_14ms = 0x04,
-+ PCF50606_OOCC2_EXTONDB_62ms = 0x08,
-+ PCF50606_OOCC2_EXTONDB_500ms = 0x0c,
-+};
-+
-+enum pcf50606_reg_int1 {
-+ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */
-+ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */
-+ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */
-+ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */
-+ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */
-+ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */
-+ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */
-+};
-+
-+enum pcf50606_reg_int2 {
-+ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */
-+ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */
-+ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */
-+ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */
-+ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */
-+ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */
-+ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */
-+ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */
-+};
-+
-+enum pcf50606_reg_int3 {
-+ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */
-+ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */
-+ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */
-+ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */
-+ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */
-+ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */
-+};
-+
-+/* used by PSSC, PWROKM, PWROKS, */
-+enum pcf50606_regu {
-+ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */
-+ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */
-+ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */
-+ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */
-+ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */
-+ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */
-+ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */
-+ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */
-+};
-+
-+enum pcf50606_reg_dcdc4 {
-+ PCF50606_DCDC4_MODE_AUTO = 0x00,
-+ PCF50606_DCDC4_MODE_PWM = 0x01,
-+ PCF50606_DCDC4_MODE_PCF = 0x02,
-+ PCF50606_DCDC4_OFF_FLOAT = 0x00,
-+ PCF50606_DCDC4_OFF_BYPASS = 0x04,
-+ PCF50606_DCDC4_OFF_PULLDOWN = 0x08,
-+ PCF50606_DCDC4_CURLIM_500mA = 0x00,
-+ PCF50606_DCDC4_CURLIM_750mA = 0x10,
-+ PCF50606_DCDC4_CURLIM_1000mA = 0x20,
-+ PCF50606_DCDC4_CURLIM_1250mA = 0x30,
-+ PCF50606_DCDC4_TOGGLE = 0x40,
-+ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80,
-+};
-+
-+enum pcf50606_reg_dcdec2 {
-+ PCF50606_DCDEC2_MODE_AUTO = 0x00,
-+ PCF50606_DCDEC2_MODE_PWM = 0x01,
-+ PCF50606_DCDEC2_MODE_PCF = 0x02,
-+ PCF50606_DCDEC2_OFF_FLOAT = 0x00,
-+ PCF50606_DCDEC2_OFF_BYPASS = 0x04,
-+};
-+
-+enum pcf50606_reg_dcudc2 {
-+ PCF50606_DCUDC2_MODE_AUTO = 0x00,
-+ PCF50606_DCUDC2_MODE_PWM = 0x01,
-+ PCF50606_DCUDC2_MODE_PCF = 0x02,
-+ PCF50606_DCUDC2_OFF_FLOAT = 0x00,
-+ PCF50606_DCUDC2_OFF_BYPASS = 0x04,
-+};
-+
-+enum pcf50606_reg_adcc1 {
-+ PCF50606_ADCC1_TSCMODACT = 0x01,
-+ PCF50606_ADCC1_TSCMODSTB = 0x02,
-+ PCF50606_ADCC1_TRATSET = 0x04,
-+ PCF50606_ADCC1_NTCSWAPE = 0x08,
-+ PCF50606_ADCC1_NTCSWAOFF = 0x10,
-+ PCF50606_ADCC1_EXTSYNCBREAK = 0x20,
-+ /* reserved */
-+ PCF50606_ADCC1_TSCINT = 0x80,
-+};
-+
-+enum pcf50606_reg_adcc2 {
-+ PCF50606_ADCC2_ADCSTART = 0x01,
-+ /* see enum pcf50606_adcc2_adcmux */
-+ PCF50606_ADCC2_SYNC_NONE = 0x00,
-+ PCF50606_ADCC2_SYNC_TXON = 0x20,
-+ PCF50606_ADCC2_SYNC_PWREN1 = 0x40,
-+ PCF50606_ADCC2_SYNC_PWREN2 = 0x60,
-+ PCF50606_ADCC2_RES_10BIT = 0x00,
-+ PCF50606_ADCC2_RES_8BIT = 0x80,
-+};
-+
-+#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1)
-+
-+#define ADCMUX_SHIFT 1
-+enum pcf50606_adcc2_adcmux {
-+ PCF50606_ADCMUX_BATVOLT_RES = 0x0 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_BATVOLT_SUBTR = 0x1 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_ADCIN1_RES = 0x2 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_ADCIN1_SUBTR = 0x3 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_BATTEMP = 0x4 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_ADCIN2 = 0x5 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_ADCIN3 = 0x6 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_ADCIN3_RATIO = 0x7 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_XPOS = 0x8 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_YPOS = 0x9 << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_P1 = 0xa << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_P2 = 0xb << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_BATVOLT_ADCIN1 = 0xc << ADCMUX_SHIFT,
-+ PCF50606_ADCMUX_XY_SEQUENCE = 0xe << ADCMUX_SHIFT,
-+ PCF50606_P1_P2_RESISTANCE = 0xf << ADCMUX_SHIFT,
-+};
-+
-+enum pcf50606_adcs2 {
-+ PCF50606_ADCS2_ADCRDY = 0x80,
-+};
-+
-+enum pcf50606_reg_mbcc1 {
-+ PCF50606_MBCC1_CHGAPE = 0x01,
-+ PCF50606_MBCC1_AUTOFST = 0x02,
-+#define PCF50606_MBCC1_CHGMOD_MASK 0x1c
-+#define PCF50606_MBCC1_CHGMOD_SHIFT 2
-+ PCF50606_MBCC1_CHGMOD_QUAL = 0x00,
-+ PCF50606_MBCC1_CHGMOD_PRE = 0x04,
-+ PCF50606_MBCC1_CHGMOD_TRICKLE = 0x08,
-+ PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c,
-+ PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10,
-+ PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14,
-+ PCF50606_MBCC1_CHGMOD_FAST_SW = 0x18,
-+ PCF50606_MBCC1_CHGMOD_IDLE = 0x1c,
-+ PCF50606_MBCC1_DETMOD_LOWCHG = 0x20,
-+ PCF50606_MBCC1_DETMOD_WDRST = 0x40,
-+};
-+
-+enum pcf50606_reg_bvmc {
-+ PCF50606_BVMC_LOWBAT = 0x01,
-+ PCF50606_BVMC_THRSHLD_NULL = 0x00,
-+ PCF50606_BVMC_THRSHLD_2V8 = 0x02,
-+ PCF50606_BVMC_THRSHLD_2V9 = 0x04,
-+ PCF50606_BVMC_THRSHLD_3V = 0x08,
-+ PCF50606_BVMC_THRSHLD_3V1 = 0x08,
-+ PCF50606_BVMC_THRSHLD_3V2 = 0x0a,
-+ PCF50606_BVMC_THRSHLD_3V3 = 0x0c,
-+ PCF50606_BVMC_THRSHLD_3V4 = 0x0e,
-+ PCF50606_BVMC_DISDB = 0x10,
-+};
-+
-+/* this is to be provided by the board implementation */
-+extern const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS];
-+
-+void pcf50606_reg_write(u_int8_t reg, u_int8_t val);
-+
-+u_int8_t pcf50606_reg_read(u_int8_t reg);
-+
-+void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
-+void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits);
-+
-+void pcf50606_init(void);
-+void pcf50606_charge_autofast(int on);
-+
-+#endif /* _PCF50606_H */
-+
-Index: u-boot/board/neo1973/common/cmd_neo1973.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/cmd_neo1973.c
-@@ -0,0 +1,99 @@
-+/*
-+ * (C) Copyright 2006 by OpenMoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h> /* for print_IPaddr */
-+#include <s3c2410.h>
-+
-+#include "neo1973.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
-+
-+int do_neo1973 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+ int i;
-+
-+ if (!strcmp(argv[1], "info")) {
-+ printf("FIC Neo1973 Hardware Revision 0x%04x\n", get_board_rev());
-+ } else if (!strcmp(argv[1], "power-off")) {
-+ neo1973_poweroff();
-+ } else if (!strcmp(argv[1], "charger") || !strcmp(argv[1], "charge")) {
-+ if (argc < 3)
-+ goto out_help;
-+ if (!strcmp(argv[2], "status") || !strcmp(argv[2], "state")) {
-+ printf("%s\n", neo1973_get_charge_status());
-+ } else if (!strcmp(argv[2], "autofast")) {
-+ neo1973_set_charge_mode(NEO1973_CHGCMD_AUTOFAST);
-+ } else if (!strcmp(argv[2], "!autofast")) {
-+ neo1973_set_charge_mode(NEO1973_CHGCMD_NO_AUTOFAST);
-+ } else if (!strcmp(argv[2], "off")) {
-+ neo1973_set_charge_mode(NEO1973_CHGCMD_OFF);
-+ } else if (!strcmp(argv[2], "fast")) {
-+ neo1973_set_charge_mode(NEO1973_CHGCMD_FAST);
-+ } else
-+ goto out_help;
-+ } else if (!strcmp(argv[1], "backlight")) {
-+ if (argc < 3)
-+ goto out_help;
-+ if (!strcmp(argv[2], "on"))
-+ neo1973_backlight(1);
-+ else
-+ neo1973_backlight(0);
-+ } else if (!strcmp(argv[1], "vibrator")) {
-+ if (argc < 3)
-+ goto out_help;
-+ if (!strcmp(argv[2], "on"))
-+ neo1973_vibrator(1);
-+ else
-+ neo1973_vibrator(0);
-+ } else {
-+out_help:
-+ printf("Usage:\n%s\n", cmdtp->usage);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+U_BOOT_CMD(
-+ neo1973, 4, 1, do_neo1973,
-+ "neo1973 - phone specific commands\n",
-+ "neo1973 info - display phone informantion\n"
-+ "neo1973 power-off - switch off the phone\n"
-+ "neo1973 charger status - display charger status\n"
-+ "neo1973 charger autofast - enable automatic fast (500mA) charging\n"
-+ "neo1973 charger !autofast - disable automatic fast (500mA) charging\n"
-+ "neo1973 charger fast - enable fast (500mA) charging\n"
-+ "neo1973 charger off - disable charging\n"
-+ "neo1973 backlight (on|off) - switch backlight on or off\n"
-+ "neo1973 vibrator (on|off) - switch vibrator on or off\n"
-+);
-+#endif /* CFG_CMD_BDI */
-Index: u-boot/board/neo1973/common/jbt6k74.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/jbt6k74.c
-@@ -0,0 +1,420 @@
-+/* u-boot driver for the tpo JBT6K74-AS LCM ASIC
-+ *
-+ * Copyright (C) 2006-2007 by OpenMoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ * All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <spi.h>
-+#include <video_fb.h>
-+#include <asm/errno.h>
-+#include <s3c2410.h>
-+#include "jbt6k74.h"
-+
-+#if 0
-+#define DEBUGP(x, args...) printf("%s: " x, __FUNCTION__, ## args);
-+#define DEBUGPC(x, args...) printf(x, ## args);
-+#else
-+#define DEBUGP(x, args...) do { } while (0)
-+#define DEBUGPC(x, args...) do { } while (0)
-+#endif
-+
-+
-+enum jbt_register {
-+ JBT_REG_SLEEP_IN = 0x10,
-+ JBT_REG_SLEEP_OUT = 0x11,
-+
-+ JBT_REG_DISPLAY_OFF = 0x28,
-+ JBT_REG_DISPLAY_ON = 0x29,
-+
-+ JBT_REG_RGB_FORMAT = 0x3a,
-+ JBT_REG_QUAD_RATE = 0x3b,
-+
-+ JBT_REG_POWER_ON_OFF = 0xb0,
-+ JBT_REG_BOOSTER_OP = 0xb1,
-+ JBT_REG_BOOSTER_MODE = 0xb2,
-+ JBT_REG_BOOSTER_FREQ = 0xb3,
-+ JBT_REG_OPAMP_SYSCLK = 0xb4,
-+ JBT_REG_VSC_VOLTAGE = 0xb5,
-+ JBT_REG_VCOM_VOLTAGE = 0xb6,
-+ JBT_REG_EXT_DISPL = 0xb7,
-+ JBT_REG_OUTPUT_CONTROL = 0xb8,
-+ JBT_REG_DCCLK_DCEV = 0xb9,
-+ JBT_REG_DISPLAY_MODE1 = 0xba,
-+ JBT_REG_DISPLAY_MODE2 = 0xbb,
-+ JBT_REG_DISPLAY_MODE = 0xbc,
-+ JBT_REG_ASW_SLEW = 0xbd,
-+ JBT_REG_DUMMY_DISPLAY = 0xbe,
-+ JBT_REG_DRIVE_SYSTEM = 0xbf,
-+
-+ JBT_REG_SLEEP_OUT_FR_A = 0xc0,
-+ JBT_REG_SLEEP_OUT_FR_B = 0xc1,
-+ JBT_REG_SLEEP_OUT_FR_C = 0xc2,
-+ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
-+ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
-+ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
-+ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
-+
-+ JBT_REG_GAMMA1_FINE_1 = 0xc7,
-+ JBT_REG_GAMMA1_FINE_2 = 0xc8,
-+ JBT_REG_GAMMA1_INCLINATION = 0xc9,
-+ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
-+
-+ JBT_REG_BLANK_CONTROL = 0xcf,
-+ JBT_REG_BLANK_TH_TV = 0xd0,
-+ JBT_REG_CKV_ON_OFF = 0xd1,
-+ JBT_REG_CKV_1_2 = 0xd2,
-+ JBT_REG_OEV_TIMING = 0xd3,
-+ JBT_REG_ASW_TIMING_1 = 0xd4,
-+ JBT_REG_ASW_TIMING_2 = 0xd5,
-+
-+ JBT_REG_HCLOCK_VGA = 0xec,
-+ JBT_REG_HCLOCK_QVGA = 0xed,
-+
-+};
-+
-+static const char *jbt_state_names[] = {
-+ [JBT_STATE_DEEP_STANDBY] = "deep-standby",
-+ [JBT_STATE_SLEEP] = "sleep",
-+ [JBT_STATE_NORMAL] = "normal",
-+};
-+
-+#define GTA01_SCLK (1 << 7) /* GPG7 */
-+#define GTA01_MOSI (1 << 6) /* GPG6 */
-+#define GTA01_MISO (1 << 5) /* GPG5 */
-+#define GTA01_CS (1 << 3) /* GPG3 */
-+
-+#define SPI_READ ((immr->GPGDAT & GTA01_MISO) != 0)
-+
-+#define SPI_CS(bit) if (bit) gpio->GPGDAT |= GTA01_CS; \
-+ else gpio->GPGDAT &= ~GTA01_CS
-+
-+#define SPI_SDA(bit) if (bit) gpio->GPGDAT |= GTA01_MOSI; \
-+ else gpio->GPGDAT &= ~GTA01_MOSI
-+
-+#define SPI_SCL(bit) if (bit) gpio->GPGDAT |= GTA01_SCLK; \
-+ else gpio->GPGDAT &= ~GTA01_SCLK
-+
-+/* 150uS minimum clock cycle, we have two of this plus our other
-+ * instructions */
-+#define SPI_DELAY udelay(100) /* 200uS */
-+
-+
-+#define JBT_TX_BUF_SIZE
-+struct jbt_info {
-+ enum jbt_state state;
-+ u_int16_t tx_buf[4];
-+ struct spi_device *spi_dev;
-+};
-+
-+static struct jbt_info _jbt, *jbt = &_jbt;
-+
-+static int jbt_spi_xfer(int wordnum, int bitlen, u_int16_t *dout)
-+{
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+ u_int16_t tmpdout = 0;
-+ int i, j;
-+
-+ DEBUGP("spi_xfer: dout %08X wordnum %u bitlen %d\n",
-+ *(uint *)dout, wordnum, bitlen);
-+
-+ SPI_CS(0);
-+
-+ for (i = 0; i < wordnum; i ++) {
-+ tmpdout = dout[i];
-+
-+ for (j = 0; j < bitlen; j++) {
-+ SPI_SCL(0);
-+ if (tmpdout & (1 << bitlen-1)) {
-+ SPI_SDA(1);
-+ DEBUGPC("1");
-+ } else {
-+ SPI_SDA(0);
-+ DEBUGPC("0");
-+ }
-+ SPI_DELAY;
-+ SPI_SCL(1);
-+ SPI_DELAY;
-+ tmpdout <<= 1;
-+ }
-+ DEBUGPC(" ");
-+ }
-+ DEBUGPC("\n");
-+
-+ SPI_CS(1);
-+
-+ return 0;
-+}
-+
-+#define JBT_COMMAND 0x000
-+#define JBT_DATA 0x100
-+
-+static int jbt_reg_write_nodata(struct jbt_info *jbt, u_int8_t reg)
-+{
-+ int rc;
-+
-+ jbt->tx_buf[0] = JBT_COMMAND | reg;
-+
-+ rc = jbt_spi_xfer(1, 9, jbt->tx_buf);
-+
-+ return rc;
-+}
-+
-+
-+static int jbt_reg_write(struct jbt_info *jbt, u_int8_t reg, u_int8_t data)
-+{
-+ int rc;
-+
-+ jbt->tx_buf[0] = JBT_COMMAND | reg;
-+ jbt->tx_buf[1] = JBT_DATA | data;
-+
-+ rc = jbt_spi_xfer(2, 9, jbt->tx_buf);
-+
-+ return rc;
-+}
-+
-+static int jbt_reg_write16(struct jbt_info *jbt, u_int8_t reg, u_int16_t data)
-+{
-+ int rc;
-+
-+ jbt->tx_buf[0] = JBT_COMMAND | reg;
-+ jbt->tx_buf[1] = JBT_DATA | (data >> 8);
-+ jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
-+
-+ rc = jbt_spi_xfer(3, 9, jbt->tx_buf);
-+
-+ return rc;
-+}
-+
-+static int jbt_init_regs(struct jbt_info *jbt)
-+{
-+ int rc;
-+
-+ DEBUGP("entering\n");
-+
-+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
-+ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
-+ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
-+ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
-+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
-+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
-+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
-+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
-+ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
-+ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
-+ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
-+ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
-+ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
-+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x02);
-+ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
-+
-+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
-+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
-+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-+
-+ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
-+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
-+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
-+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-+
-+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
-+ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
-+
-+ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
-+
-+ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
-+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
-+
-+#if 0
-+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
-+#endif
-+
-+ return rc;
-+}
-+
-+static int standby_to_sleep(struct jbt_info *jbt)
-+{
-+ int rc;
-+
-+ DEBUGP("entering\n");
-+
-+ /* three times command zero */
-+ rc = jbt_reg_write_nodata(jbt, 0x00);
-+ udelay(1000);
-+ rc = jbt_reg_write_nodata(jbt, 0x00);
-+ udelay(1000);
-+ rc = jbt_reg_write_nodata(jbt, 0x00);
-+ udelay(1000);
-+
-+ /* deep standby out */
-+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17);
-+
-+ return rc;
-+}
-+
-+static int sleep_to_normal(struct jbt_info *jbt)
-+{
-+ int rc;
-+ DEBUGP("entering\n");
-+
-+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
-+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
-+
-+ /* Quad mode off */
-+ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
-+
-+ /* AVDD on, XVDD on */
-+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
-+
-+ /* Output control */
-+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-+
-+ /* Sleep mode off */
-+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
-+
-+ /* initialize register set */
-+ rc |= jbt_init_regs(jbt);
-+ return rc;
-+}
-+
-+static int normal_to_sleep(struct jbt_info *jbt)
-+{
-+ int rc;
-+ DEBUGP("entering\n");
-+
-+ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
-+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002);
-+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
-+
-+ return rc;
-+}
-+
-+static int sleep_to_standby(struct jbt_info *jbt)
-+{
-+ DEBUGP("entering\n");
-+ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
-+}
-+
-+/* frontend function */
-+int jbt6k74_enter_state(enum jbt_state new_state)
-+{
-+ int rc = -EINVAL;
-+
-+ DEBUGP("entering(old_state=%u, new_state=%u)\n", jbt->state, new_state);
-+
-+ switch (jbt->state) {
-+ case JBT_STATE_DEEP_STANDBY:
-+ switch (new_state) {
-+ case JBT_STATE_DEEP_STANDBY:
-+ rc = 0;
-+ break;
-+ case JBT_STATE_SLEEP:
-+ rc = standby_to_sleep(jbt);
-+ break;
-+ case JBT_STATE_NORMAL:
-+ /* first transition into sleep */
-+ rc = standby_to_sleep(jbt);
-+ /* then transition into normal */
-+ rc |= sleep_to_normal(jbt);
-+ break;
-+ }
-+ break;
-+ case JBT_STATE_SLEEP:
-+ switch (new_state) {
-+ case JBT_STATE_SLEEP:
-+ rc = 0;
-+ break;
-+ case JBT_STATE_DEEP_STANDBY:
-+ rc = sleep_to_standby(jbt);
-+ break;
-+ case JBT_STATE_NORMAL:
-+ rc = sleep_to_normal(jbt);
-+ break;
-+ }
-+ break;
-+ case JBT_STATE_NORMAL:
-+ switch (new_state) {
-+ case JBT_STATE_NORMAL:
-+ rc = 0;
-+ break;
-+ case JBT_STATE_DEEP_STANDBY:
-+ /* first transition into sleep */
-+ rc = normal_to_sleep(jbt);
-+ /* then transition into deep standby */
-+ rc |= sleep_to_standby(jbt);
-+ break;
-+ case JBT_STATE_SLEEP:
-+ rc = normal_to_sleep(jbt);
-+ break;
-+ }
-+ break;
-+ }
-+
-+ return rc;
-+}
-+
-+int jbt6k74_display_onoff(int on)
-+{
-+ DEBUGP("entering\n");
-+ if (on)
-+ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
-+ else
-+ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
-+}
-+
-+int jbt6k74_init(void)
-+{
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* initialize SPI for GPIO bitbang */
-+ gpio->GPGCON &= 0xffff033f;
-+ gpio->GPGCON |= 0x00005440;
-+
-+ /* get LCM out of reset */
-+ gpio->GPCDAT |= (1 << 6);
-+
-+ /* according to data sheet: wait 50ms (Tpos of LCM). However, 50ms
-+ * seems unreliable with later LCM batches, increasing to 90ms */
-+ udelay(90000);
-+
-+ return 0;
-+}
-+
-+void board_video_init(GraphicDevice *pGD)
-+{
-+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+
-+ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */
-+
-+ lcd->LCDCON2 = 0x019fc3c1;
-+ lcd->LCDCON3 = 0x0039df67;
-+ lcd->LCDCON4 = 0x00000007;
-+ lcd->LCDCON5 = 0x0001cf09;
-+ lcd->LPCSEL = 0x00000000;
-+}
-Index: u-boot/board/neo1973/common/jbt6k74.h
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/jbt6k74.h
-@@ -0,0 +1,14 @@
-+#ifndef _JBT6K74_H
-+#define _JBT6K74_H
-+
-+enum jbt_state {
-+ JBT_STATE_DEEP_STANDBY,
-+ JBT_STATE_SLEEP,
-+ JBT_STATE_NORMAL,
-+};
-+
-+int jbt6k74_init(void);
-+int jbt6k74_display_onoff(int on);
-+int jbt6k74_enter_state(enum jbt_state new_state);
-+
-+#endif
-Index: u-boot/board/neo1973/common/lowlevel_init.S
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/lowlevel_init.S
-@@ -0,0 +1,187 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
-+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
-+ *
-+ * Modified for the FIC Neo1973 GTA01 by Harald Welte <laforge@openmoko.org>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON 0x48000000
-+
-+/* BWSCON */
-+#define DW8 (0x0)
-+#define DW16 (0x1)
-+#define DW32 (0x2)
-+#define WAIT (0x1<<2)
-+#define UBLB (0x1<<3)
-+
-+#define B1_BWSCON (DW32)
-+#define B2_BWSCON (DW16)
-+#define B3_BWSCON (DW16 + WAIT + UBLB)
-+#define B4_BWSCON (DW16)
-+#define B5_BWSCON (DW16)
-+#define B6_BWSCON (DW32)
-+#define B7_BWSCON (DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs 0x0 /* 0clk */
-+#define B0_Tcos 0x0 /* 0clk */
-+#define B0_Tacc 0x7 /* 14clk */
-+#define B0_Tcoh 0x0 /* 0clk */
-+#define B0_Tah 0x0 /* 0clk */
-+#define B0_Tacp 0x0
-+#define B0_PMC 0x0 /* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs 0x0 /* 0clk */
-+#define B1_Tcos 0x0 /* 0clk */
-+#define B1_Tacc 0x7 /* 14clk */
-+#define B1_Tcoh 0x0 /* 0clk */
-+#define B1_Tah 0x0 /* 0clk */
-+#define B1_Tacp 0x0
-+#define B1_PMC 0x0
-+
-+#define B2_Tacs 0x0
-+#define B2_Tcos 0x0
-+#define B2_Tacc 0x7
-+#define B2_Tcoh 0x0
-+#define B2_Tah 0x0
-+#define B2_Tacp 0x0
-+#define B2_PMC 0x0
-+
-+#define B3_Tacs 0x0 /* 0clk */
-+#define B3_Tcos 0x3 /* 4clk */
-+#define B3_Tacc 0x7 /* 14clk */
-+#define B3_Tcoh 0x1 /* 1clk */
-+#define B3_Tah 0x0 /* 0clk */
-+#define B3_Tacp 0x3 /* 6clk */
-+#define B3_PMC 0x0 /* normal */
-+
-+#define B4_Tacs 0x0 /* 0clk */
-+#define B4_Tcos 0x0 /* 0clk */
-+#define B4_Tacc 0x7 /* 14clk */
-+#define B4_Tcoh 0x0 /* 0clk */
-+#define B4_Tah 0x0 /* 0clk */
-+#define B4_Tacp 0x0
-+#define B4_PMC 0x0 /* normal */
-+
-+#define B5_Tacs 0x0 /* 0clk */
-+#define B5_Tcos 0x0 /* 0clk */
-+#define B5_Tacc 0x7 /* 14clk */
-+#define B5_Tcoh 0x0 /* 0clk */
-+#define B5_Tah 0x0 /* 0clk */
-+#define B5_Tacp 0x0
-+#define B5_PMC 0x0 /* normal */
-+
-+#define B6_MT 0x3 /* SDRAM */
-+#define B6_Trcd 0x1 /* 3clk */
-+#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+#define B6_SCAN 0x1 /* 9bit */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+ defined(CONFIG_ARCH_GTA01B_v4)
-+#define B6_SCAN 0x2 /* 10bit */
-+#endif
-+
-+#define B7_MT 0x3 /* SDRAM */
-+#define B7_Trcd 0x1 /* 3clk */
-+#define B7_SCAN 0x2 /* 10bit */
-+
-+/* REFRESH parameter */
-+#define REFEN 0x1 /* Refresh enable */
-+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-+#define Trp 0x1 /* 3clk */
-+#define Trc 0x3 /* 7clk */
-+#define Tchr 0x2 /* 3clk */
-+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+ .word TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+ /* memory control configuration */
-+ /* make r0 relative the current location so that it */
-+ /* reads SMRDATA out of FLASH rather than memory ! */
-+ adr r0, SMRDATA
-+ ldr r1, =BWSCON /* Bus Width Status Controller */
-+ add r2, r0, #13*4
-+0:
-+ ldr r3, [r0], #4
-+ str r3, [r1], #4
-+ cmp r2, r0
-+ bne 0b
-+
-+ /* setup asynchronous bus mode */
-+ mrc p15, 0, r1 ,c1 ,c0, 0
-+ orr r1, r1, #0xc0000000
-+ mcr p15, 0, r1, c1, c0, 0
-+
-+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ /* switch on power for NAND */
-+ ldr r0, =0x56000010 /* GPBCON */
-+ ldr r1, [r0]
-+ orr r1, r1, #0x10
-+ str r1, [r0]
-+
-+ ldr r0, =0x56000014 /* GPBDAT */
-+ ldr r1, [r0]
-+ orr r1, r1, #(1 <<2)
-+ str r1, [r0]
-+#endif
-+
-+ /* everything is fine now */
-+ mov pc, lr
-+
-+ .ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+ .word 0xb2
-+ .word 0x30
-+ .word 0x30
-Index: u-boot/board/neo1973/gta01/Makefile
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/Makefile
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = lib$(BOARD).a
-+
-+OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o
-+SOBJS := ../common/lowlevel_init.o
-+
-+$(LIB): $(OBJS) $(SOBJS)
-+ $(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: u-boot/board/neo1973/gta01/config.mk
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/config.mk
-@@ -0,0 +1,34 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+#
-+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+# GTA01v3 has 1 bank of 64 MB SDRAM
-+# GTA01v4 has 1 bank of 64 MB SDRAM
-+#
-+# 3000'0000 to 3400'0000
-+# we load ourself to 33F8'0000
-+#
-+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
-+#
-+# 3000'0000 to 3800'0000
-+# we load ourself to 37F8'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# download area is 3200'0000 or 3300'0000
-+
-+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-+
-+ifeq ($(GTA01_BIG_RAM),y)
-+# FIXME: TEXT_BASE = 0x37F80000
-+TEXT_BASE = 0x33F80000
-+else
-+TEXT_BASE = 0x33F80000
-+endif
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -0,0 +1,422 @@
-+/*
-+ * (C) 2006 by OpenMoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger@sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+#include <i2c.h>
-+
-+#include "pcf50606.h"
-+
-+#include "../common/neo1973.h"
-+#include "../common/jbt6k74.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* That many seconds the power key needs to be pressed to power up */
-+#define POWER_KEY_SECONDS 2
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
-+//#define M_PDIV 0x3
-+//#define M_SDIV 0x1
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
-+#define M_SDIV 0x0
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+/* In case the debug board is attached, we cannot go beyond 200 MHz */
-+#if 0
-+#define M_MDIV 0x7d /* Fout = 266MHz */
-+#define M_PDIV 0x1
-+#define M_SDIV 0x1
-+#else
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
-+#define M_SDIV 0x0
-+#endif
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+/* This board doesn't have bus lines at teh debug port, and we can go to 266 */
-+#define M_MDIV 0x7d /* Fout = 266MHz */
-+#define M_PDIV 0x1
-+#define M_SDIV 0x1
-+#else
-+#error Please define GTA01 revision
-+#endif
-+
-+#define U_M_MDIV 0x78
-+#define U_M_PDIV 0x2
-+#define U_M_SDIV 0x3
-+
-+unsigned int neo1973_wakeup_cause;
-+extern int nobootdelay;
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+ gpio->GPACON = 0x007FFFFF;
-+
-+ gpio->GPBCON = 0x00005055;
-+ gpio->GPBUP = 0x000007FF;
-+
-+ gpio->GPCCON = 0xAAAA12A8;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x00002AA9;
-+ gpio->GPFUP = 0x000000FF;
-+
-+ gpio->GPGCON = 0xA846F0C0;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0008FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+ gpio->GPACON = 0x005E47FF;
-+
-+ gpio->GPBCON = 0x00045015;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */
-+
-+ gpio->GPCCON = 0xAAAA12A9;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xA02AAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x0000aa09;
-+ gpio->GPFUP = 0x000000FF;
-+
-+ gpio->GPGCON = 0xFF40F0C1;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0000FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ gpio->GPACON = 0x005E4FFF;
-+
-+ gpio->GPBCON = 0x00145415;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */
-+
-+ gpio->GPCCON = 0xAAAA12A9;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xA02AAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x0000aa19;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */
-+
-+ gpio->GPGCON = 0xFF40F0C1;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0000FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ gpio->GPACON = 0x0005E0FFF;
-+ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */
-+
-+ gpio->GPBCON = 0x00045455;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (SD power down) */
-+
-+ gpio->GPCCON = 0xAAAA12A9;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x0000aa99;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */
-+
-+ gpio->GPGCON = 0xFF14F0F8;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0000FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+#else
-+#error Please define GTA01 version
-+#endif
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+ unsigned char tmp;
-+ char buf[32];
-+
-+ /* Initialize the Power Management Unit with a safe register set */
-+ pcf50606_init();
-+
-+ /* obtain wake-up reason, save INT1 in environment */
-+ tmp = pcf50606_reg_read(PCF50606_REG_INT1);
-+ sprintf(buf, "0x%02x", tmp);
-+ setenv("pcf50606_int1", buf);
-+
-+ if (tmp & PCF50606_INT1_ALARM) {
-+ /* we've been woken up by RTC alarm or charger insert, boot */
-+ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
-+ goto continue_boot;
-+ }
-+ if (tmp & PCF50606_INT1_EXTONR) {
-+ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
-+ }
-+
-+ if (tmp & PCF50606_INT1_ONKEYF) {
-+ int seconds = 0;
-+ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
-+ /* we've been woken up by a falling edge of the onkey */
-+
-+ /* we can't just setenv(bootdelay,-1) because that would
-+ * accidentially become permanent if the user does saveenv */
-+ if (neo1973_911_key_pressed())
-+ nobootdelay = 1;
-+
-+ while (1) {
-+ u_int8_t int1, oocs;
-+
-+ oocs = pcf50606_reg_read(PCF50606_REG_OOCS);
-+ if (oocs & PFC50606_OOCS_ONKEY)
-+ break;
-+
-+ int1 = pcf50606_reg_read(PCF50606_REG_INT1);
-+ if (int1 & PCF50606_INT1_SECOND)
-+ seconds++;
-+
-+ if (seconds >= POWER_KEY_SECONDS)
-+ goto continue_boot;
-+ }
-+ /* Power off if minimum number of seconds not reached */
-+ neo1973_poweroff();
-+ }
-+
-+ /* if there's no other reason, must be regular reset */
-+ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
-+
-+continue_boot:
-+ jbt6k74_init();
-+ jbt6k74_enter_state(JBT_STATE_NORMAL);
-+ jbt6k74_display_onoff(1);
-+
-+ /* issue a short pulse with the vibrator */
-+ neo1973_vibrator(1);
-+ udelay(50000);
-+ neo1973_vibrator(0);
-+
-+ /* switch on the backlight */
-+ neo1973_backlight(1);
-+
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+ {
-+ /* check if sd card is inserted, and power-up if it is */
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+ if (!(gpio->GPFDAT & (1 << 5)))
-+ gpio->GPBDAT &= ~(1 << 2);
-+ }
-+#endif
-+
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-+
-+u_int32_t get_board_rev(void)
-+{
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+ return 0x00000130;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+ return 0x00000140;
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+ return 0x00000220;
-+#elif defined(CONFIG_ARCH_GTA01B_v3)
-+ return 0x00000230;
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ return 0x00000240;
-+#endif
-+}
-+
-+void neo1973_poweroff(void)
-+{
-+ serial_printf("poweroff\n");
-+ udc_disconnect();
-+ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY);
-+ /* don't return to caller */
-+ while (1) ;
-+}
-+
-+void neo1973_backlight(int on)
-+{
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+ if (on)
-+ gpio->GPBDAT |= 0x01;
-+ else
-+ gpio->GPBDAT &= ~0x01;
-+}
-+
-+void neo1973_vibrator(int on)
-+{
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+ if (on)
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+ gpio->GPGDAT |= (1 << 11); /* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ gpio->GPBDAT |= (1 << 10); /* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ gpio->GPBDAT |= (1 << 3); /* GPB3 */
-+#endif
-+ else
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */
-+#endif
-+}
-+
-+int neo1973_911_key_pressed(void)
-+{
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+ if (gpio->GPFDAT & (1 << 6))
-+ return 0;
-+ return 1;
-+}
-+
-+static const char *chgstate_names[] = {
-+ [PCF50606_MBCC1_CHGMOD_QUAL] = "qualification",
-+ [PCF50606_MBCC1_CHGMOD_PRE] = "pre",
-+ [PCF50606_MBCC1_CHGMOD_TRICKLE] = "trickle",
-+ [PCF50606_MBCC1_CHGMOD_FAST_CCCV] = "fast_cccv",
-+ [PCF50606_MBCC1_CHGMOD_FAST_NOCC] = "fast_nocc",
-+ [PCF50606_MBCC1_CHGMOD_FAST_NOCV] = "fast_nocv",
-+ [PCF50606_MBCC1_CHGMOD_FAST_SW] = "fast_switch",
-+ [PCF50606_MBCC1_CHGMOD_IDLE] = "idle",
-+};
-+
-+const char *neo1973_get_charge_status(void)
-+{
-+ u_int8_t mbcc1 = pcf50606_reg_read(PCF50606_REG_MBCC1);
-+ u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK);
-+ return chgstate_names[chgmod];
-+}
-+
-+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd)
-+{
-+ switch (cmd) {
-+ case NEO1973_CHGCMD_NONE:
-+ break;
-+ case NEO1973_CHGCMD_AUTOFAST:
-+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+ PCF50606_MBCC1_AUTOFST,
-+ PCF50606_MBCC1_AUTOFST);
-+ break;
-+ case NEO1973_CHGCMD_NO_AUTOFAST:
-+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+ PCF50606_MBCC1_AUTOFST, 0);
-+ break;
-+ case NEO1973_CHGCMD_OFF:
-+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+ PCF50606_MBCC1_CHGMOD_MASK,
-+ PCF50606_MBCC1_CHGMOD_IDLE);
-+ break;
-+
-+ case NEO1973_CHGCMD_FAST:
-+ case NEO1973_CHGCMD_FASTER:
-+ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1,
-+ PCF50606_MBCC1_CHGMOD_MASK,
-+ PCF50606_MBCC1_CHGMOD_FAST_CCCV);
-+ break;
-+ }
-+ return 0;
-+}
-+
-Index: u-boot/board/neo1973/gta01/pcf50606.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/pcf50606.c
-@@ -0,0 +1,100 @@
-+
-+#include <common.h>
-+#include <pcf50606.h>
-+
-+/* initial register set for PCF50606 in Neo1973 devices */
-+const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = {
-+ [PCF50606_REG_OOCS] = 0x00,
-+ /* gap */
-+ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND,
-+ [PCF50606_REG_INT2M] = 0x00,
-+ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES,
-+ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK |
-+ PCF50606_OOCC1_CHGWAK |
-+ PCF50606_OOCC1_EXTONWAK_HIGH,
-+ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms |
-+ PCF50606_OOCC2_EXTONDB_14ms,
-+ /* gap */
-+ [PCF50606_REG_PSSC] = 0x00,
-+ [PCF50606_REG_PWROKM] = 0x00,
-+ /* gap */
-+#if defined(CONFIG_ARCH_GTA01B_v2)
-+ [PCF50606_REG_DCDC1] = 0x1e, /* GL_3V3: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_DCDC1] = 0x18, /* GL_1V5: off */
-+#endif
-+ [PCF50606_REG_DCDC2] = 0x00,
-+ [PCF50606_REG_DCDC3] = 0x00,
-+ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */
-+
-+ [PCF50606_REG_DCDEC1] = 0xe8, /* IO_3V3: on */
-+ [PCF50606_REG_DCDEC2] = 0x00,
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+ [PCF50606_REG_DCUDC1] = 0xe3, /* CORE_1V8: 1.8V */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ [PCF50606_REG_DCUDC1] = 0xe4, /* CORE_1V8: 2.1V */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_DCUDC1] = 0xc4, /* CORE_1V8: 2.1V if PWREN2 = HIGH */
-+#endif
-+ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+ [PCF50606_REG_IOREGC] = 0x13, /* VTCXO_2V8: off */
-+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
-+ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+ //see internal bug 94 [PCF50606_REG_IOREGC] = 0x18, /* CODEC_3V3: off */
-+ [PCF50606_REG_IOREGC] = 0xf8, /* CODEC_3V3: on */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+ [PCF50606_REG_D1REGC1] = 0x15, /* VRF_3V: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+ defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_D1REGC1] = 0x16, /* BT_3V15: off */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+ [PCF50606_REG_D2REGC1] = 0xf8, /* SD_3V3: on */
-+#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
-+ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_D2REGC1] = 0x10, /* GL_2V5: off */
-+#endif
-+
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+ [PCF50606_REG_D3REGC1] = 0x18, /* CODEC_3V3: off */
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+ [PCF50606_REG_D3REGC1] = 0x13, /* VTXCO_2V8: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
-+ [PCF50606_REG_D3REGC1] = 0x00, /* USER1: off */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_D3REGC1] = 0xec, /* STBY_1V8: 2.1V */
-+#endif
-+
-+ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */
-+ [PCF50606_REG_LPREGC2] = 0x00,
-+
-+ [PCF50606_REG_MBCC1] = 0x01, /* CHGAPE */
-+ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */
-+ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */
-+ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */
-+ [PCF50606_REG_ADCC1] = 0x00,
-+ [PCF50606_REG_ADCC2] = 0x00,
-+ /* gap */
-+#if defined(CONFIG_ARCH_GTA01B_v4)
-+ [PCF50606_REG_ACDC1] = 0x86, /* ACD thresh 1.6V, enabled */
-+#else
-+ [PCF50606_REG_ACDC1] = 0x00,
-+#endif
-+ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3,
-+ [PCF50606_REG_PWMC1] = 0x00,
-+ [PCF50606_REG_LEDC1] = 0x00,
-+ [PCF50606_REG_LEDC2] = 0x00,
-+ [PCF50606_REG_GPOC1] = 0x00,
-+ [PCF50606_REG_GPOC2] = 0x00,
-+ [PCF50606_REG_GPOC3] = 0x00,
-+ [PCF50606_REG_GPOC4] = 0x00,
-+ [PCF50606_REG_GPOC5] = 0x00,
-+};
-+
-+
-Index: u-boot/board/neo1973/gta01/split_by_variant.sh
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/split_by_variant.sh
-@@ -0,0 +1,57 @@
-+#!/bin/sh
-+# ---------------------------------------------------------
-+# Set the core module defines according to Core Module
-+# ---------------------------------------------------------
-+# ---------------------------------------------------------
-+# Set up the GTA01 type define
-+# ---------------------------------------------------------
-+
-+CFGINC=${obj}include/config.h
-+CFGTMP=${obj}board/neo1973/gta01/config.tmp
-+
-+mkdir -p ${obj}include
-+if [ "$1" == "" ]
-+then
-+ echo "$0:: No parameters - using GTA01Bv3 config"
-+ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
-+ echo "GTA01_BIG_RAM=y" > $CFGTMP
-+else
-+ case "$1" in
-+ gta01v4_config)
-+ echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC
-+ echo "GTA01_BIG_RAM=n" > $CFGTMP
-+ ;;
-+
-+ gta01v3_config)
-+ echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC
-+ echo "GTA01_BIG_RAM=n" > $CFGTMP
-+ ;;
-+
-+ gta01bv2_config)
-+ echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC
-+ echo "GTA01_BIG_RAM=y" > $CFGTMP
-+ ;;
-+
-+ gta01bv3_config)
-+ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC
-+ echo "GTA01_BIG_RAM=y" > $CFGTMP
-+ ;;
-+
-+ gta01bv4_config)
-+ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
-+ echo "GTA01_BIG_RAM=y" > $CFGTMP
-+ ;;
-+
-+ *)
-+ echo "$0:: Unrecognised config - using GTA01Bv4 config"
-+ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC
-+ echo "GTA01_BIG_RAM=y" > $CFGTMP
-+ ;;
-+
-+ esac
-+
-+fi
-+# ---------------------------------------------------------
-+# Complete the configuration
-+# ---------------------------------------------------------
-+$MKCONFIG -a neo1973_gta01 arm arm920t gta01 neo1973 s3c24x0
-Index: u-boot/board/neo1973/gta01/u-boot.lds
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/gta01/u-boot.lds
-@@ -0,0 +1,58 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm920t/start.o (.text)
-+ cpu/arm920t/s3c24x0/nand_read.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- /dev/null
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -0,0 +1,265 @@
-+/*
-+ * (C) Copyright 2006 OpenMoko, Inc.
-+ * Author: Harald Welte <laforge@openmoko.org>
-+ *
-+ * Configuation settings for the FIC Neo1973 GTA01 Linux GSM phone
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if defined(BUILD_FOR_RAM)
-+/* If we want to start u-boot from inside RAM */
-+#define CONFIG_SKIP_RELOCATE_UBOOT 1
-+#define CONFIG_SKIP_LOWLEVEL_INIT 1
-+#else
-+/* we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT 1
-+#define CONFIG_S3C2410_NAND_SKIP_BAD 1
-+#endif
-+
-+#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU 1
-+#define CONFIG_USE_IRQ 1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define CONFIG_RTC_S3C24X0 1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+ CFG_CMD_BDI | \
-+ CFG_CMD_LOADS | \
-+ CFG_CMD_LAODB | \
-+ CFG_CMD_IMI | \
-+ CFG_CMD_CACHE | \
-+ CFG_CMD_MEMORY | \
-+ CFG_CMD_ENV | \
-+ /* CFG_CMD_IRQ | */ \
-+ CFG_CMD_BOOTD | \
-+ CFG_CMD_CONSOLE | \
-+ CFG_CMD_ASKENV | \
-+ CFG_CMD_RUN | \
-+ CFG_CMD_ECHO | \
-+ CFG_CMD_I2C | \
-+ CFG_CMD_REGINFO | \
-+ CFG_CMD_IMMAP | \
-+ CFG_CMD_DATE | \
-+ CFG_CMD_AUTOSCRIPT | \
-+ CFG_CMD_BSP | \
-+ CFG_CMD_ELF | \
-+ CFG_CMD_MISC | \
-+ /* CFG_CMD_USB | */ \
-+ /* CFG_CMD_JFFS2 | */ \
-+ CFG_CMD_DIAG | \
-+ /* CFG_CMD_HWFLOW | */ \
-+ CFG_CMD_SAVES | \
-+ CFG_CMD_NAND | \
-+ CFG_CMD_PORTIO | \
-+ CFG_CMD_MMC | \
-+ CFG_CMD_FAT | \
-+ CFG_CMD_EXT2 | \
-+ 0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_LONGHELP /* undef to save memory */
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01B_v3)
-+#define CFG_PROMPT "GTA01Bv3 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01B_v4)
-+#define CFG_PROMPT "GTA01Bv4 # " /* Monitor Command Prompt */
-+#endif
-+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS 16 /* max number of command args */
-+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-+
-+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-+
-+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define CFG_HZ 1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-+#endif
-+
-+#if 0
-+#define CONFIG_USB_OHCI 1
-+#endif
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
-+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-+ defined(CONFIG_ARCH_GTA01B_v4)
-+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-+#else
-+#error Please define GTA01 variant
-+#endif
-+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+/* No NOR flash in this device */
-+#define CFG_NO_FLASH 1
-+
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */
-+
-+#define NAND_MAX_CHIPS 1
-+#define CFG_NAND_BASE 0x4e000000
-+#define CFG_MAX_NAND_DEVICE 1
-+
-+#define CONFIG_MMC 1
-+#define CFG_MMC_BASE 0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2 1
-+
-+#define CONFIG_FAT 1
-+#define CONFIG_SUPPORT_VFAT
-+
-+#if 0
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE 1
-+#define CONFIG_JFFS2_NAND 1
-+#define CONFIG_JFFS2_NAND_DEV 0
-+#define CONFIG_JFFS2_NAND_OFF 0x634000
-+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
-+#endif
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG 1
-+#define CONFIG_REVISION_TAG 1
-+#if 0
-+#define CONFIG_SERIAL_TAG 1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C 1
-+#define CONFIG_HARD_I2C 1
-+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */
-+#define CFG_I2C_SLAVE 0x7f
-+
-+/* we have a board_late_init() function */
-+#define BOARD_LATE_INIT 1
-+
-+#if 1
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT 0
-+#define VIDEO_TSTC_FCT serial_tstc
-+#define VIDEO_GETC_FCT serial_getc
-+
-+#define LCD_VIDEO_ADDR 0x33d00000
-+#endif
-+
-+#define CONFIG_S3C2410_NAND_BBT 1
-+#define CONFIG_S3C2410_NAND_HWECC 1
-+
-+#define CONFIG_DRIVER_PCF50606 1
-+
-+#endif /* __CONFIG_H */
-Index: u-boot/board/neo1973/common/neo1973.h
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/neo1973.h
-@@ -0,0 +1,32 @@
-+#ifndef _NEO1973_H
-+#define _NEO1973_H
-+
-+enum wakeup_reason {
-+ NEO1973_WAKEUP_NONE,
-+ NEO1973_WAKEUP_RESET,
-+ NEO1973_WAKEUP_POWER_KEY,
-+ NEO1973_WAKEUP_CHARGER,
-+ NEO1973_WAKEUP_ALARM,
-+};
-+
-+enum neo1973_charger_cmd {
-+ NEO1973_CHGCMD_NONE,
-+ NEO1973_CHGCMD_AUTOFAST,
-+ NEO1973_CHGCMD_NO_AUTOFAST,
-+ NEO1973_CHGCMD_OFF,
-+ NEO1973_CHGCMD_FAST,
-+ NEO1973_CHGCMD_FASTER,
-+};
-+
-+extern unsigned int neo1973_wakeup_cause;
-+
-+void neo1973_poweroff(void);
-+void neo1973_backlight(int on);
-+void neo1973_vibrator(int on);
-+
-+int neo1973_911_key_pressed(void);
-+
-+const char *neo1973_get_charge_status(void);
-+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd);
-+
-+#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 11:00:17 +0000