diff options
Diffstat (limited to 'openembedded/conf/machine/include')
23 files changed, 415 insertions, 0 deletions
diff --git a/openembedded/conf/machine/include/handheld-common.conf b/openembedded/conf/machine/include/handheld-common.conf new file mode 100644 index 000000000..467d5e59f --- /dev/null +++ b/openembedded/conf/machine/include/handheld-common.conf @@ -0,0 +1,25 @@ +HANDHELD_MODULES = "ipv6 \ +ipsec \ +nvrd \ +mip6-mn \ +tun \ +ide-cs ide-disk ide-probe-mod \ +loop \ +vfat ext2 \ +sunrpc nfs \ +btuart-cs dtl1-cs bt3c-cs rfcomm bnep l2cap sco hci_uart \ +pcnet-cs serial-cs airo-cs \ +af_packet \ +ppp-async ppp-deflate ppp-mppe \ +ip-gre ip-tables ipip \ +irda irlan irnet irport irtty ircomm-tty \ +input uinput \ +" + +PCMCIA_MANAGER ?= "pcmcia-cs" + +# Configuration bits for "generic handheld" +BOOTSTRAP_EXTRA_RDEPENDS += "${PCMCIA_MANAGER} apm apmd network-suspend-scripts" +BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp wireless-tools irda-utils openswan wpa-supplicant-nossl lrzsz ppp-dialin ${@linux_module_packages('${HANDHELD_MODULES}', d)}" + +INHERIT += "linux_modules" diff --git a/openembedded/conf/machine/include/ipaq-common.conf b/openembedded/conf/machine/include/ipaq-common.conf new file mode 100644 index 000000000..eb696cf9f --- /dev/null +++ b/openembedded/conf/machine/include/ipaq-common.conf @@ -0,0 +1,7 @@ +IPAQ_MODULES = "apm h3600_generic_sleeve ipaq-sleeve ipaq-mtd-asset nvrd atmelwlandriver sa1100-rtc ipaq-hal h3600_ts usb-eth wavelan_cs keybdev" + +BOOTSTRAP_EXTRA_RRECOMMENDS += "kbdd bl hostap-modules-cs orinoco-modules-cs atmelwlandriver ${@linux_module_packages('${IPAQ_MODULES}', d)}" +BOOTSTRAP_EXTRA_RRECOMMENDS_append_kernel24 += "mipv6" + +PREFERRED_PROVIDER_virtual/xserver = "xserver-kdrive" + diff --git a/openembedded/conf/machine/include/ixp4xx.conf b/openembedded/conf/machine/include/ixp4xx.conf new file mode 100644 index 000000000..639bf4a74 --- /dev/null +++ b/openembedded/conf/machine/include/ixp4xx.conf @@ -0,0 +1,174 @@ +#@TYPE: Machine configuration +#@NAME: ixp4xx +#@DESCRIPTION: genric machine configuration for ixp4xx platforms + +#------------------------------------------------------------------------------- +# INPUTS +#------------------------------------------------------------------------------- +# conf/${DISTRO}.conf is included after this file and should be used to modify +# variables identified as 'INPUTS' to the required values for the DISTRO, this +# will cause the board specific settings (which depend for the most part on the +# exact CPU used) to be set correctly within this file. The results are the +# variables identifies here as 'OUTPUTS' +# +#variable = "default" +# <possible values> +# description + +ARCH_BYTE_SEX = "be" +# "be" "le" +# The memory byte sex and (on correctly implemented hardware - the IXP4XX is +# correct) the byte sex of the buses within the system. 'be' (big-endian) +# means that the first byte is the most significant byte on a bus, 'le' +# (little-endian) means that the first byte is the least significant byte. + +ARM_INSTRUCTION_SET = "arm" +# "arm" "thumb" +# The instruction set the compiler should use when generating application +# code. The kernel is always compiled with arm code at present. arm code +# is the original 32 bit ARM instruction set, thumb code is the 16 bit +# encoded RISC sub-set. Thumb code is smaller (maybe 70% of the ARM size) +# but requires more instructions (140% for 70% smaller code) so may be +# slower. + +THUMB_INTERWORK = "yes" +# "yes" "no" +# Whether to compile with code to allow interworking between the two +# instruction sets. This allows thumb code to be executed on a primarily +# arm system and vice versa. It is strongly recommended that DISTROs not +# turn this off - the actual cost is very small. + +DISTRO_BASE = "" +# "" ":<base>" +# If given this must be the name of a 'distro' to add to the bitbake OVERRIDES +# after ${DISTRO}, this allows different distros to share a common base of +# overrides. The value given must include a leading ':' or chaos will result. + +IXP4XX_SUFFIX = "${MACHINE_ARCH}" +# <string> +# Kernel suffix - 'ixp4xxbe' or 'ixp4xxle' for a truely generic image, controls +# the suffix on the name of the generated zImage, override in the DISTRO +# configuration if patches or defconfig are changed for the DISTRO. + +#------------------------------------------------------------------------------- +# OUTPUTS +#------------------------------------------------------------------------------- + +#OVERRIDES +# The standard ':' separated list of overrides used by bitbake - see the +# basic setting in bitbake.conf. This list is based on that used for the +# standard setting however :<base>, :thumb and :thumb-interwork will be +# inserted at appropriate points if a base distro, default use of thumb or +# arm/thumb interworking are enabled in the inputs. +OVERRIDE_THUMB = "${@['', ':thumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +OVERRIDE_INTERWORK = "${@['', ':thumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}" +OVERRIDES = "local:${MACHINE}:ixp4xx:${DISTRO}${DISTRO_BASE}:${TARGET_OS}:${TARGET_ARCH}${OVERRIDE_THUMB}${OVERRIDE_INTERWORK}:build-${BUILD_OS}" + +# TARGET_CC_ARCH +# TARGET_CC_KERNEL_ARCH +# TARGET_LD_ARCH +# TARGET_LD_KERNEL_ARCH +# Compiler and linker options for application code and kernel code. These +# options ensure that the compiler has the correct settings for the selected +# instruction set and interworking. +ARM_INTERWORK_M_OPT = "${@['-mno-thumb-interwork', '-mthumb-interwork'][bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes']}" +ARM_THUMB_M_OPT = "${@['-mno-thumb', '-mthumb'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +# +TARGET_CC_ARCH = "-march=armv5te -mtune=xscale ${ARM_INTERWORK_M_OPT} ${ARM_THUMB_M_OPT}" +TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale -mno-thumb-interwork -mno-thumb" +TARGET_LD_ARCH = "" +TARGET_LD_KERNEL_ARCH = "" + +# FULL_OPTIMIZATION +# Optimization settings. Os works fine and is significantly better than O2. +# The other settings are somewhat arbitrary. The optimisations chosen here +# include the ones which 'break' symbolic debugging (because the compiler does +# not include enough information to allow the debugger to know where given +# values are.) The -fno options are an attempt to cancel explicit use of space +# consuming options found in some packages (this isn't a complete list, this is +# just the ones which package writers seem to know about and abuse). +FULL_OPTIMIZATION = "-Os -fomit-frame-pointer -frename-registers \ + -fno-unroll-loops -fno-inline-functions \ + -fweb -funit-at-a-time" + +# TARGET_ARCH +# The correct setting for the system endianness (ARCH_BYTE_SEX). This will +# be arm (le) or armeb (be) - it is difficult to be more precise in the +# setting because of the large number of ways it is used within OpenEmbedded. +TARGET_ARCH = "${@['armeb', 'arm'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}" + +# TARGET_PACKAGE_ARCH [not used] +# The correct setting for the generated packages. This corresponds to the +# -march flag passed to the compiler because that limits the architectures +# on which the generated code will run. +BYTE_SEX_CHAR = "${@['b', 'l'][bb.data.getVar('ARCH_BYTE_SEX', d, 1) == 'le']}" +TARGET_PACKAGE_ARCH_BASE = "${@['armv5te', 'thumbv5t'][bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) == 'thumb']}" +TARGET_PACKAGE_ARCH = "${TARGET_PACKAGE_ARCH_BASE}${BYTE_SEX_CHAR}" + +# MACHINE_ARCH +# The correct setting for packages which are specific to the machine, this +# defaults to ${MACHINE} in bitbake.conf, however it is set to ixp4xx here +# because everything built here is no more specific than that. +MACHINE_ARCH = "ixp4xx${ARCH_BYTE_SEX}" + +# IPKG_ARCHS +# The full list of package architectures which should run on the system. +# This takes into account both the board level issues and the INPUTS set +# by the distro. The arm list is derived from the architecture settings +# known to gcc, the thumb list is then derived from that (only the 't' +# architectures of course). +#[not used]: TARGET_ARCH is handled below because it is also currently +# used for thumb packages. +#ARM_ARCHITECTURES = "${TARGET_ARCH} armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}" +ARM_ARCHITECTURES = "armv2${BYTE_SEX_CHAR} armv2a${BYTE_SEX_CHAR} armv3${BYTE_SEX_CHAR} armv3m${BYTE_SEX_CHAR} armv4${BYTE_SEX_CHAR} armv4t${BYTE_SEX_CHAR} armv5${BYTE_SEX_CHAR} armv5t${BYTE_SEX_CHAR} armv5e${BYTE_SEX_CHAR} armv5te${BYTE_SEX_CHAR} xscale${BYTE_SEX_CHAR}" +THUMB_ARCHITECTURES = "thumbe${BYTE_SEX_CHAR} thumbv4t${BYTE_SEX_CHAR} thumbv5t${BYTE_SEX_CHAR}" + +# NOTE: this list contains just the things which rootfs_ipk.bbclass does +# not add, rootfs_ipk.bbclass evaluates: +# +# ipkgarchs="all any noarch ${TARGET_ARCH} ${IPKG_ARCHS} ${MACHINE}" +# +# This is a priority ordered list - most desireable architecture at the end, +# so put <ARM_INSTRUCTION_SET>_ARCHITECTURES at the end and, if +# THUMB_INTERWORK precede this with the other architectures. +IPKG_ARCHS = "ixp4xx ${MACHINE} \ + ${@(lambda arch_thumb, arch_arm, is_arm, interwork: \ + (interwork and (is_arm and arch_thumb or arch_arm) + ' ' or '') \ + + '${TARGET_ARCH} ' + (is_arm and arch_arm or arch_thumb)) \ + (bb.data.getVar('THUMB_ARCHITECTURES', d, 1), \ + bb.data.getVar('ARM_ARCHITECTURES', d, 1), \ + bb.data.getVar('ARM_INSTRUCTION_SET', d, 1) != 'thumb', \ + bb.data.getVar('THUMB_INTERWORK', d, 1) == 'yes')} \ + ${MACHINE_ARCH} ${MACHINE}${ARCH_BYTE_SEX}" + +# IPKG_ARCH_LIST [not used] +# This is used to override the ipkgarchs settings in rootfs_ipk.bbclass, allowing +# the removal of the raw "${MACHINE}" from the end of the list. ${MACHINE} and +# ixp4xx are included at the start (lower priority) as the non-byte-sex specific +# versions. +IPKG_ARCH_LIST = "all any noarch ixp4xx ${MACHINE} ${IPKG_ARCHS}" + +#------------------------------------------------------------------------------- +# Package versions +#------------------------------------------------------------------------------- +# Warning: these are shared across the different machine and distro +# configurations but can be overridden therein if required. +SRCDATE_ipkg-utils ?= "20060106" +SRCDATE_ipkg-utils-native ?= "20060106" +SRCDATE_ipkg-link ?= "20060106" +SRCDATE_irssi ?= "20050930" + +CVS_TARBALL_STASH = "http://sources.nslu2-linux.org/sources/" +INHERIT += "nslu2-mirrors" + +PREFERRED_VERSION_ipkg ?= "0.99.154" +PREFERRED_VERSION_ipkg-native ?= "0.99.154" + +#------------------------------------------------------------------------------- +# Board defaults +#------------------------------------------------------------------------------- +# These values are board specific but they seem to be common to a large number +# of boards so are reasonable defaults. +SERIAL_CONSOLE = "115200 ttyS0" +KERNEL_CONSOLE = "ttyS0,115200n8" +USE_VT = "0" diff --git a/openembedded/conf/machine/include/poodle-2.4.conf b/openembedded/conf/machine/include/poodle-2.4.conf new file mode 100644 index 000000000..5453fda60 --- /dev/null +++ b/openembedded/conf/machine/include/poodle-2.4.conf @@ -0,0 +1,10 @@ +PREFERRED_PROVIDER_virtual/kernel = "openzaurus-pxa" + +# Later versions are broken on kernel 2.4 +PREFERRED_VERSION_orinoco-modules = "0.13e" + +BOOTSTRAP_EXTRA_RDEPENDS = "kernel hostap-modules-cs orinoco-modules orinoco-modules-cs sharp-sdmmc-support \ +kernel-module-net-fd kernel-module-registers kernel-module-pxa-bi \ +kernel-module-usbdcore kernel-module-usbdmonitor \ +hostap-utils prism3-firmware prism3-support" + diff --git a/openembedded/conf/machine/include/poodle-2.6.conf b/openembedded/conf/machine/include/poodle-2.6.conf new file mode 100644 index 000000000..885bf40b4 --- /dev/null +++ b/openembedded/conf/machine/include/poodle-2.6.conf @@ -0,0 +1,4 @@ +PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" + +BOOTSTRAP_EXTRA_RDEPENDS = "kernel udev sysfsutils hostap-modules-cs orinoco-modules-cs udev-utils" + diff --git a/openembedded/conf/machine/include/thinclient-common.conf b/openembedded/conf/machine/include/thinclient-common.conf new file mode 100644 index 000000000..4a96b4252 --- /dev/null +++ b/openembedded/conf/machine/include/thinclient-common.conf @@ -0,0 +1,19 @@ +THINCLIENT_MODULES = "ipv6 \ +mip6-mn \ +tun \ +loop \ +vfat \ +sunrpc nfs \ +rfcomm bnep l2cap sco \ +af_packet \ +ppp-async ppp-deflate ppp-mppe \ +ip-gre ip-tables ipip \ +irda irlan irnet irport irtty \ +input uinput \ +" + +# Configuration bits for "generic thinclient" +BOOTSTRAP_EXTRA_RDEPENDS += "apm" +BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp bluez-utils wireless-tools ${@linux_module_packages('${THINCLIENT_MODULES}', d)}" + +INHERIT += "linux_modules" diff --git a/openembedded/conf/machine/include/tosa-2.4.conf b/openembedded/conf/machine/include/tosa-2.4.conf new file mode 100644 index 000000000..88df07cdd --- /dev/null +++ b/openembedded/conf/machine/include/tosa-2.4.conf @@ -0,0 +1,20 @@ +PREFERRED_PROVIDER_xserver = "xserver-kdrive" +PREFERRED_PROVIDER_virtual/kernel = "openzaurus-pxa" + +# Later versions are broken on kernel 2.4 +PREFERRED_VERSION_orinoco-modules = "0.13e" + +BOOTSTRAP_EXTRA_RDEPENDS += "wlan-ng-modules wlan-ng-utils console-tools \ + kernel-module-acm \ + kernel-module-evdev kernel-module-net-fd \ + kernel-module-pxa-bi kernel-module-registers \ + kernel-module-storage-fd kernel-module-usb-ohci-tc6393 \ + kernel hostap-modules-cs orinoco-modules-cs \ + sharp-sdmmc-support kernel-module-pxa-bi \ + kernel-module-ip-gre kernel-module-irnet kernel-module-ipip \ + kernel-module-usbcore kernel-module-usbdcore kernel-module-usbdmonitor kernel-module-usb-storage" + +RRECOMMENDS += "kernel-module-usbdserial kernel-module-usbkbd \ + kernel-module-usbmouse kernel-module-hid usbutils \ + kernel-module-evdev" + diff --git a/openembedded/conf/machine/include/tosa-2.6.conf b/openembedded/conf/machine/include/tosa-2.6.conf new file mode 100644 index 000000000..fdd706d09 --- /dev/null +++ b/openembedded/conf/machine/include/tosa-2.6.conf @@ -0,0 +1,14 @@ +include conf/machine/include/zaurus-clamshell-2.6.conf +# SOUND Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-snd kernel-module-snd-ac97-bus kernel-module-snd-ac97-codec kernel-module-snd-mixer-oss kernel-module-snd-page-alloc kernel-module-snd-pcm kernel-module-snd-pcm-oss kernel-module-snd-pxa2xx-ac97 kernel-module-snd-pxa2xx-pcm kernel-module-snd-timer kernel-module-soundcore" + +module_autoload_snd-pxa2xx-ac97 = "snd-pxa2xx-ac97" +module_autoload_snd-pcm-oss ="snd-pcm-oss" + +# WM97xx Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-wm97xx-core kernel-module-wm9705 kernel-module-pxa-wm97xx" +module_autoload_wm9705 = "wm9705" +#module_autoload_pxa-wm97xx = "pen_int=0" + +#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-wm97xx" +#module_autoload_wm97xx = "wm97xx" diff --git a/openembedded/conf/machine/include/tune-arm920t.conf b/openembedded/conf/machine/include/tune-arm920t.conf new file mode 100644 index 000000000..936b13751 --- /dev/null +++ b/openembedded/conf/machine/include/tune-arm920t.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-march=armv4t -mtune=arm920t" + diff --git a/openembedded/conf/machine/include/tune-arm926ejs.conf b/openembedded/conf/machine/include/tune-arm926ejs.conf new file mode 100644 index 000000000..5e2f6b7c6 --- /dev/null +++ b/openembedded/conf/machine/include/tune-arm926ejs.conf @@ -0,0 +1,3 @@ +#if gcc breaks change arm926ejs to arm926ej-s +TARGET_CC_ARCH = "-march=armv5te -mtune=arm926ejs" +PACKAGE_ARCH = "armv5te" diff --git a/openembedded/conf/machine/include/tune-arm9tdmi.conf b/openembedded/conf/machine/include/tune-arm9tdmi.conf new file mode 100644 index 000000000..cfc3bad1c --- /dev/null +++ b/openembedded/conf/machine/include/tune-arm9tdmi.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-mcpu=arm9tdmi -mtune=arm9tdmi" diff --git a/openembedded/conf/machine/include/tune-c3.conf b/openembedded/conf/machine/include/tune-c3.conf new file mode 100644 index 000000000..e6a522af1 --- /dev/null +++ b/openembedded/conf/machine/include/tune-c3.conf @@ -0,0 +1,3 @@ +TARGET_CC_ARCH = "-march=c3 -mtune=c3" +PACKAGE_ARCH = "i586" + diff --git a/openembedded/conf/machine/include/tune-ep9312.conf b/openembedded/conf/machine/include/tune-ep9312.conf new file mode 100644 index 000000000..f7a6fb845 --- /dev/null +++ b/openembedded/conf/machine/include/tune-ep9312.conf @@ -0,0 +1,6 @@ +TARGET_CC_ARCH = "-march=ep9312 -mtune=ep9312" +# add "-mfp=maverick" for newer gcc versions > 4.0 + +#set arch to ep9312 for all generated packages +PACKAGE_ARCH = "ep9312" + diff --git a/openembedded/conf/machine/include/tune-ppc603e.conf b/openembedded/conf/machine/include/tune-ppc603e.conf new file mode 100644 index 000000000..7c8714cfc --- /dev/null +++ b/openembedded/conf/machine/include/tune-ppc603e.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=603e" +PACKAGE_ARCH = "ppc603e" diff --git a/openembedded/conf/machine/include/tune-ppce500.conf b/openembedded/conf/machine/include/tune-ppce500.conf new file mode 100644 index 000000000..11717eba7 --- /dev/null +++ b/openembedded/conf/machine/include/tune-ppce500.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=8540" +PACKAGE_ARCH = "ppce500" diff --git a/openembedded/conf/machine/include/tune-sh3.conf b/openembedded/conf/machine/include/tune-sh3.conf new file mode 100644 index 000000000..192dd8fd2 --- /dev/null +++ b/openembedded/conf/machine/include/tune-sh3.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-ml -m3" diff --git a/openembedded/conf/machine/include/tune-sh4.conf b/openembedded/conf/machine/include/tune-sh4.conf new file mode 100644 index 000000000..866f7f89d --- /dev/null +++ b/openembedded/conf/machine/include/tune-sh4.conf @@ -0,0 +1 @@ +TARGET_CC_ARCH = "-ml -m4" diff --git a/openembedded/conf/machine/include/tune-strongarm.conf b/openembedded/conf/machine/include/tune-strongarm.conf new file mode 100644 index 000000000..8654c996e --- /dev/null +++ b/openembedded/conf/machine/include/tune-strongarm.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-march=armv4 -mtune=xscale" + diff --git a/openembedded/conf/machine/include/tune-supersparc.conf b/openembedded/conf/machine/include/tune-supersparc.conf new file mode 100644 index 000000000..1b1ec1207 --- /dev/null +++ b/openembedded/conf/machine/include/tune-supersparc.conf @@ -0,0 +1,2 @@ +TARGET_CC_ARCH = "-mcpu=supersparc" +PACKAGE_ARCH = "supersparc" diff --git a/openembedded/conf/machine/include/tune-xscale.conf b/openembedded/conf/machine/include/tune-xscale.conf new file mode 100644 index 000000000..0b98f09fc --- /dev/null +++ b/openembedded/conf/machine/include/tune-xscale.conf @@ -0,0 +1,3 @@ +TARGET_CC_ARCH = "-march=armv5te -mtune=xscale" +PACKAGE_ARCH = "armv5te" + diff --git a/openembedded/conf/machine/include/zaurus-clamshell-2.4.conf b/openembedded/conf/machine/include/zaurus-clamshell-2.4.conf new file mode 100644 index 000000000..184258c8b --- /dev/null +++ b/openembedded/conf/machine/include/zaurus-clamshell-2.4.conf @@ -0,0 +1,44 @@ +# Zaurus Clamshell specific configuration for kernel 2.4 +# Don't forget to include zaurus-clamshell.conf as well + +PREFERRED_PROVIDERS_append_c7x0 = " virtual/kernel:c7x0-kernels-2.4-embedix" +PREFERRED_PROVIDERS_append_akita = " virtual/kernel:openzaurus-pxa27x" +PREFERRED_PROVIDERS_append_spitz = " virtual/kernel:openzaurus-pxa27x" +PREFERRED_PROVIDERS_append_borzoi = " virtual/kernel:openzaurus-pxa27x" + +# Later versions are broken on kernel 2.4 +PREFERRED_VERSION_orinoco-modules = "0.13e" + +BOOTSTRAP_EXTRA_RDEPENDS += "kernel hostap-modules-cs orinoco-modules-cs sharp-sdmmc-support \ +pcmcia-cs apmd apm wireless-tools console-tools irda-utils hostap-utils prism3-firmware prism3-support \ +wpa-supplicant-nossl ppp ppp-dialin openswan" + +# Misc Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-net-fd kernel-module-registers" + +# USB Client Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-usbdcore kernel-module-usbdmonitor" + +# Bluetooth Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluez kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ + kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco \ + kernel-module-bluecard-cs kernel-module-btuart-cs kernel-module-dtl1-cs \ + kernel-module-firmware-class kernel-module-bt3c-cs" + +# BI Module +BOOTSTRAP_EXTRA_RDEPENDS_append_c7x0 = " kernel-module-pxa-bi" +BOOTSTRAP_EXTRA_RDEPENDS_append_spitz = " kernel-module-pxa27x-bi" +BOOTSTRAP_EXTRA_RDEPENDS_append_akita = " kernel-module-pxa27x-bi" +BOOTSTRAP_EXTRA_RDEPENDS_append_borzoi = " kernel-module-pxa27x-bi" + +# USB Host Modules +BOOTSTRAP_EXTRA_RDEPENDS_append_spitz = " kernel-module-usbcore kernel-module-usbmouse kernel-module-usb-monitor \ + kernel-module-usbkbd kernel-module-usb-storage kernel-module-hci-usb \ + kernel-module-usb-ohci-pxa27x kernel-module-bfusb" +BOOTSTRAP_EXTRA_RDEPENDS_append_akita = " kernel-module-usbcore kernel-module-usbmouse kernel-module-usb-monitor \ + kernel-module-usbkbd kernel-module-usb-storage kernel-module-hci-usb \ + kernel-module-usb-ohci-pxa27x kernel-module-bfusb" +BOOTSTRAP_EXTRA_RDEPENDS_append_borzoi = " kernel-module-usbcore kernel-module-usbmouse kernel-module-usb-monitor \ + kernel-module-usbkbd kernel-module-usb-storage kernel-module-hci-usb \ + kernel-module-usb-ohci-pxa27x kernel-module-bfusb" + diff --git a/openembedded/conf/machine/include/zaurus-clamshell-2.6.conf b/openembedded/conf/machine/include/zaurus-clamshell-2.6.conf new file mode 100644 index 000000000..007750a39 --- /dev/null +++ b/openembedded/conf/machine/include/zaurus-clamshell-2.6.conf @@ -0,0 +1,48 @@ +# Zaurus Clamshell specific configuration for kernel 2.6 +# Don't forget to include zaurus-clamshell.conf as well + +PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus" + +BOOTSTRAP_EXTRA_DEPENDS += "virtual/kernel udev sysfsutils spectrum-fw orinoco-conf \ +pcmciautils apmd wireless-tools console-tools irda-utils lrzsz hostap-utils prism3-firmware prism3-support \ +ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils module-init-tools alsa-lib" + +BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \ +pcmciautils apm wireless-tools irda-utils udev-utils console-tools hostap-utils prism3-firmware prism3-support \ +ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf" + +# Ethernet modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs" +# NFS Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nfs kernel-module-lockd kernel-module-sunrpc" +# Crypto Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-des kernel-module-md5" +# SMB and CRAMFS +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-smbfs kernel-module-cramfs" +# Serial Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-8250 kernel-module-serial-cs" +# Bluetooth Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-bluetooth kernel-module-l2cap kernel-module-rfcomm kernel-module-hci-vhci \ + kernel-module-bnep kernel-module-hidp kernel-module-hci-uart kernel-module-sco \ + kernel-module-bt3c-cs kernel-module-bluecard-cs kernel-module-btuart-cs kernel-module-dtl1-cs" +# Infrared Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pxaficp-ir kernel-module-irda kernel-module-ircomm \ + kernel-module-ircomm-tty kernel-module-irlan kernel-module-irnet kernel-module-ir-usb" + +# USB Gadget Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-gadgetfs kernel-module-g-file-storage \ + kernel-module-g-serial kernel-module-g-ether" + +# Wireless Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-hostap kernel-module-hostap-cs \ + kernel-module-hermes kernel-module-orinoco \ + kernel-module-orinoco-cs kernel-module-spectrum-cs" + +# Sound Modules +BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-soundcore kernel-module-snd kernel-module-snd-page-alloc kernel-module-snd-timer \ + kernel-module-snd-pcm kernel-module-snd-mixer-oss kernel-module-snd-pcm-oss \ + kernel-module-snd-soc-core kernel-module-snd-soc-pxa2xx kernel-module-snd-soc-pxa2xx-i2s" +BOOTSTRAP_EXTRA_RDEPENDS_append_c7x0 += " kernel-module-snd-soc-corgi kernel-module-snd-soc-wm8731 " +BOOTSTRAP_EXTRA_RDEPENDS_append_akita += " kernel-module-snd-soc-spitz kernel-module-snd-soc-wm8750 " +BOOTSTRAP_EXTRA_RDEPENDS_append_borzoi += " kernel-module-snd-soc-spitz kernel-module-snd-soc-wm8750 " +BOOTSTRAP_EXTRA_RDEPENDS_append_spitz += " kernel-module-snd-soc-spitz kernel-module-snd-soc-wm8750 " diff --git a/openembedded/conf/machine/include/zaurus-clamshell.conf b/openembedded/conf/machine/include/zaurus-clamshell.conf new file mode 100644 index 000000000..ec10cd5e4 --- /dev/null +++ b/openembedded/conf/machine/include/zaurus-clamshell.conf @@ -0,0 +1,22 @@ +TARGET_ARCH = "arm" +IPKG_ARCHS = "all arm armv4 armv5te c7x0" + +PREFERRED_PROVIDER_xserver = "xserver-kdrive" + +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x4000 -n" +EXTRA_IMAGEDEPENDS += "sharp-flash-header-c700 zaurus-updater" + +IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime \ + --output=${T}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}; \ + cat ${STAGING_LIBDIR}/sharp-flash-header/header-c700.bin \ + ${T}/${IMAGE_NAME}.rootfs.jffs2 > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.img" + +GUI_MACHINE_CLASS = "bigscreen" +GPE_EXTRA_INSTALL += "gaim sylpheed chkhinge" + +include conf/machine/include/handheld-common.conf + +# Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm. +include conf/machine/include/tune-xscale.conf + +SERIAL_CONSOLE = "115200 ttyS0" |