diff options
Diffstat (limited to 'openembedded/packages')
44 files changed, 3446 insertions, 1 deletions
diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch new file mode 100644 index 000000000..4461bedd4 --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch @@ -0,0 +1,31 @@ +# strip (and objcopy) fail to set the error code if there is no +# output file name and the rename of the stripped (or copied) file +# fails, yet the command fails to do anything. This fixes both +# objcopy and strip. +# +# modification by bero: Ported to 2.16.91.0.6 +# +#Signed-off-by: John Bowler <jbowler@acm.org> +#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> +--- binutils-2.16.91.0.6/binutils/objcopy.c.ark 2006-03-11 15:59:07.000000000 +0100 ++++ binutils-2.16.91.0.6/binutils/objcopy.c 2006-03-11 15:59:45.000000000 +0100 +@@ -2593,7 +2593,8 @@ + if (preserve_dates) + set_times (tmpname, &statbuf); + if (output_file == NULL) +- smart_rename (tmpname, argv[i], preserve_dates); ++ if(smart_rename (tmpname, argv[i], preserve_dates)) ++ hold_status = 1; + status = hold_status; + } + else +@@ -3184,7 +3185,8 @@ + { + if (preserve_dates) + set_times (tmpname, &statbuf); +- smart_rename (tmpname, input_filename, preserve_dates); ++ if (smart_rename (tmpname, input_filename, preserve_dates)) ++ status = 1; + } + else + unlink (tmpname); diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch new file mode 100644 index 000000000..25222e5df --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch @@ -0,0 +1,139 @@ +--- binutils-2.16.91.0.7/bfd/configure ++++ binutils-2.16.91.0.7/bfd/configure +@@ -3576,7 +3576,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +--- binutils-2.16.91.0.7/binutils/configure ++++ binutils-2.16.91.0.7/binutils/configure +@@ -3411,7 +3411,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +--- binutils-2.16.91.0.7/configure ++++ binutils-2.16.91.0.7/configure +@@ -1270,7 +1270,7 @@ + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; +- sh-*-linux*) ++ sh*-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; + sh*-*-pe|mips*-*-pe|*arm-wince-pe) +@@ -1578,7 +1578,7 @@ + romp-*-*) + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${host}" in + i[3456789]86-*-vsta) ;; # don't add gprof back in + i[3456789]86-*-go32*) ;; # don't add gprof back in +--- binutils-2.16.91.0.7/configure.in ++++ binutils-2.16.91.0.7/configure.in +@@ -468,7 +468,7 @@ + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; +- sh-*-linux*) ++ sh*-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; + sh*-*-pe|mips*-*-pe|*arm-wince-pe) +@@ -776,7 +776,7 @@ + romp-*-*) + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${host}" in + i[[3456789]]86-*-vsta) ;; # don't add gprof back in + i[[3456789]]86-*-go32*) ;; # don't add gprof back in +--- binutils-2.16.91.0.7/gas/configure ++++ binutils-2.16.91.0.7/gas/configure +@@ -3411,7 +3411,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +--- binutils-2.16.91.0.7/gprof/configure ++++ binutils-2.16.91.0.7/gprof/configure +@@ -3419,6 +3419,11 @@ + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + ++linux-uclibc*) ++ lt_cv_deplibs_check_method=pass_all ++ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so` ++ ;; ++ + netbsd* | knetbsd*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' +--- binutils-2.16.91.0.7/ld/configure ++++ binutils-2.16.91.0.7/ld/configure +@@ -3413,7 +3413,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +--- binutils-2.16.91.0.7/libtool.m4 ++++ binutils-2.16.91.0.7/libtool.m4 +@@ -739,7 +739,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + +--- binutils-2.16.91.0.7/ltconfig ++++ binutils-2.16.91.0.7/ltconfig +@@ -602,6 +602,7 @@ + + # Transform linux* to *-*-linux-gnu*, to support old configure scripts. + case $host_os in ++linux-uclibc*) ;; + linux-gnu*) ;; + linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` + esac +@@ -1247,7 +1248,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + version_type=linux + need_lib_prefix=no + need_version=no +--- binutils-2.16.91.0.7/opcodes/configure ++++ binutils-2.16.91.0.7/opcodes/configure +@@ -3579,7 +3579,7 @@ + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux-gnu*|linux-uclibc*) + lt_cv_deplibs_check_method=pass_all + ;; + diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch new file mode 100644 index 000000000..04a7e61e2 --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch @@ -0,0 +1,50 @@ +#!/bin/sh -e +## 001_ld_makefile_patch.dpatch +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Description: correct where ld scripts are installed +## DP: Author: Chris Chimelis <chris@debian.org> +## DP: Upstream status: N/A +## DP: Date: ?? + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +--- binutils-2.16.91.0.1/ld/Makefile.am ++++ binutils-2.16.91.0.1/ld/Makefile.am +@@ -20,7 +20,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + + EMUL = @EMUL@ + EMULATION_OFILES = @EMULATION_OFILES@ +--- binutils-2.16.91.0.1/ld/Makefile.in ++++ binutils-2.16.91.0.1/ld/Makefile.in +@@ -268,7 +268,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + BASEDIR = $(srcdir)/.. + BFDDIR = $(BASEDIR)/bfd + INCDIR = $(BASEDIR)/include diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch new file mode 100644 index 000000000..f337611ed --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch @@ -0,0 +1,43 @@ +#!/bin/sh -e +## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com> +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Specify which filename is causing an error if the filename is a +## DP: directory. (#45832) + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c +--- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100 ++++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100 +@@ -150,6 +150,13 @@ + { + bfd *nbfd; + const bfd_target *target_vec; ++ struct stat s; ++ ++ if (stat (filename, &s) == 0) ++ if (S_ISDIR(s.st_mode)) { ++ bfd_set_error (bfd_error_file_not_recognized); ++ return NULL; ++ } + + nbfd = _bfd_new_bfd (); + if (nbfd == NULL) diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch new file mode 100644 index 000000000..498651a90 --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch @@ -0,0 +1,47 @@ +#!/bin/sh -e +## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org> +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for +## DP: cases where -rpath isn't specified. (#151024) + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em +--- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100 ++++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100 +@@ -692,6 +692,8 @@ + && command_line.rpath == NULL) + { + lib_path = (const char *) getenv ("LD_RUN_PATH"); ++ if ((lib_path) && (strlen (lib_path) == 0)) ++ lib_path = NULL; + if (gld${EMULATION_NAME}_search_needed (lib_path, &n, + force)) + break; +@@ -871,6 +873,8 @@ + rpath = command_line.rpath; + if (rpath == NULL) + rpath = (const char *) getenv ("LD_RUN_PATH"); ++ if ((rpath) && (strlen (rpath) == 0)) ++ rpath = NULL; + if (! (bfd_elf_size_dynamic_sections + (output_bfd, command_line.soname, rpath, + command_line.filter_shlib, diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch new file mode 100644 index 000000000..5959c718d --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch @@ -0,0 +1,26 @@ +--- binutils/bfd/elf32-mips.c~ ++++ binutils/bfd/elf32-mips.c +@@ -1613,7 +1613,9 @@ + + /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses + page sizes of up to that limit, so we need to respect it. */ +-#define ELF_MAXPAGESIZE 0x10000 ++/*#define ELF_MAXPAGESIZE 0x10000*/ ++/* Use 4K to shrink the elf header. NOT for general use! */ ++#define ELF_MAXPAGESIZE 0x1000 + #define elf32_bed elf32_tradbed + + /* Include the target file again for this target. */ +--- binutils/bfd/elfn32-mips.c~ ++++ binutils/bfd/elfn32-mips.c +@@ -2399,7 +2399,9 @@ + + /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses + page sizes of up to that limit, so we need to respect it. */ +-#define ELF_MAXPAGESIZE 0x10000 ++/*#define ELF_MAXPAGESIZE 0x10000*/ ++/* Use 4K to shrink the elf header. NOT for general use! */ ++#define ELF_MAXPAGESIZE 0x1000 + #define elf32_bed elf32_tradbed + + /* Include the target file again for this target. */ diff --git a/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch new file mode 100644 index 000000000..9ef7a7c9e --- /dev/null +++ b/openembedded/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch @@ -0,0 +1,93 @@ +Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html +Fixes +localealias.s:544: Error: junk at end of line, first unrecognized character is `,' +when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3 + +Paths adjusted to match crosstool's patcher. + +Message-Id: m3n052qw2g.fsf@whitebox.m5r.de +From: Andreas Schwab <schwab at suse dot de> +To: Nathan Sidwell <nathan at codesourcery dot com> +Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com +Date: Fri, 23 Apr 2004 22:27:19 +0200 +Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line + +Nathan Sidwell <nathan@codesourcery.com> writes: + +> Index: read.c +> =================================================================== +> RCS file: /cvs/src/src/gas/read.c,v +> retrieving revision 1.76 +> diff -c -3 -p -r1.76 read.c +> *** read.c 12 Mar 2004 17:48:12 -0000 1.76 +> --- read.c 18 Mar 2004 09:56:05 -0000 +> *************** read_a_source_file (char *name) +> *** 1053,1059 **** +> #endif +> input_line_pointer--; +> /* Report unknown char as ignored. */ +> ! ignore_rest_of_line (); +> } +> +> #ifdef md_after_pass_hook +> --- 1053,1059 ---- +> #endif +> input_line_pointer--; +> /* Report unknown char as ignored. */ +> ! demand_empty_rest_of_line (); +> } +> +> #ifdef md_after_pass_hook + +This means that the unknown character is no longer ignored, despite the +comment. As a side effect a line starting with a line comment character +not followed by APP in NO_APP mode now triggers an error instead of just a +warning, breaking builds of glibc on m68k-linux. Earlier in +read_a_source_file where #APP is handled there is another comment that +claims that unknown comments are ignored, when in fact they aren't (only +the initial line comment character is skipped). + +Note that the presence of #APP will mess up the line counters, but +that appears to be difficult to fix. + +Andreas. + +2004-04-23 Andreas Schwab <schwab@suse.de> + + * read.c (read_a_source_file): Ignore unknown text after line + comment character. Fix misleading comment. + +--- binutils/gas/read.c.~1.78.~ 2004-04-23 08:58:23.000000000 +0200 ++++ binutils/gas/read.c 2004-04-23 21:49:01.000000000 +0200 +@@ -950,10 +950,14 @@ read_a_source_file (char *name) + unsigned int new_length; + char *tmp_buf = 0; + +- bump_line_counters (); + s = input_line_pointer; + if (strncmp (s, "APP\n", 4)) +- continue; /* We ignore it */ ++ { ++ /* We ignore it */ ++ ignore_rest_of_line (); ++ continue; ++ } ++ bump_line_counters (); + s += 4; + + sb_new (&sbuf); +@@ -1052,7 +1056,7 @@ read_a_source_file (char *name) + continue; + #endif + input_line_pointer--; +- /* Report unknown char as ignored. */ ++ /* Report unknown char as error. */ + demand_empty_rest_of_line (); + } + + +-- +Andreas Schwab, SuSE Labs, schwab@suse.de +SuSE Linux AG, MaxfeldstraÃe 5, 90409 NÃrnberg, Germany +Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 +"And now for something completely different." diff --git a/openembedded/packages/binutils/binutils-cross_2.16.91.0.7.bb b/openembedded/packages/binutils/binutils-cross_2.16.91.0.7.bb new file mode 100644 index 000000000..7e165271d --- /dev/null +++ b/openembedded/packages/binutils/binutils-cross_2.16.91.0.7.bb @@ -0,0 +1,32 @@ +SECTION = "devel" +include binutils_${PV}.bb +inherit cross +DEPENDS += "flex-native bison-native" +PROVIDES = "virtual/${TARGET_PREFIX}binutils" +FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}" +PACKAGES = "" +EXTRA_OECONF = "--with-sysroot=${CROSS_DIR}/${TARGET_SYS} \ + --program-prefix=${TARGET_PREFIX}" + +do_stage () { + oe_runmake install + + # We don't really need these, so we'll remove them... + rm -rf ${CROSS_DIR}/lib/ldscripts + rm -rf ${CROSS_DIR}/share/info + rm -rf ${CROSS_DIR}/share/locale + rm -rf ${CROSS_DIR}/share/man + rmdir ${CROSS_DIR}/share || : + rmdir ${CROSS_DIR}/${libdir}/gcc-lib || : + rmdir ${CROSS_DIR}/${libdir} || : + rmdir ${CROSS_DIR}/${prefix} || : + + # We want to move this into the target specific location + mkdir -p ${CROSS_DIR}/${TARGET_SYS}/lib + mv -f ${CROSS_DIR}/lib/libiberty.a ${CROSS_DIR}/${TARGET_SYS}/lib + rmdir ${CROSS_DIR}/lib || : +} + +do_install () { + : +} diff --git a/openembedded/packages/binutils/binutils_2.15.94.0.1.bb b/openembedded/packages/binutils/binutils_2.15.94.0.1.bb index 5edf4548a..2b2996abe 100644 --- a/openembedded/packages/binutils/binutils_2.15.94.0.1.bb +++ b/openembedded/packages/binutils/binutils_2.15.94.0.1.bb @@ -3,7 +3,7 @@ HOMEPAGE = "http://www.gnu.org/software/binutils/" SECTION = "devel" LICENSE = "GPL" MAINTAINER = "Gerald Britton <gbritton@doomcom.org>" -PR = "r1" +PR = "r2" inherit autotools gettext @@ -42,6 +42,7 @@ SRC_URI = \ file://ld_makefile.patch;patch=1 \ file://better_file_error.patch;patch=1 \ file://signed_char_fix.patch;patch=1 \ + file://objdump_fix.patch;patch=1 \ file://binutils-100_cflags_for_build.patch;patch=1 \ file://binutils-2.15.91.0.1-uclibc-100-conf.patch;patch=1 \ file://binutils-2.15.90.0.3-uclibc-200-build_modules.patch;patch=1" diff --git a/openembedded/packages/binutils/binutils_2.16.91.0.7.bb b/openembedded/packages/binutils/binutils_2.16.91.0.7.bb new file mode 100644 index 000000000..664fce8cb --- /dev/null +++ b/openembedded/packages/binutils/binutils_2.16.91.0.7.bb @@ -0,0 +1,123 @@ +DESCRIPTION = "A GNU collection of binary utilities" +HOMEPAGE = "http://www.gnu.org/software/binutils/" +SECTION = "devel" +LICENSE = "GPL" +DEFAULT_PREFERENCE = "-1" + +inherit autotools gettext + +PACKAGES = "${PN} ${PN}-dev ${PN}-doc ${PN}-symlinks" + +FILES_${PN} = " \ + ${bindir}/${TARGET_PREFIX}* \ + ${libdir}/lib*-*.so \ + ${prefix}/${TARGET_SYS}/bin/*" + +FILES_${PN}-dev = " \ + ${includedir} \ + ${libdir}/*.a \ + ${libdir}/*.la \ + ${libdir}/libbfd.so \ + ${libdir}/libopcodes.so" + +FILES_${PN}-symlinks = " \ + ${bindir}/addr2line \ + ${bindir}/ar \ + ${bindir}/as \ + ${bindir}/c++filt \ + ${bindir}/gprof \ + ${bindir}/ld \ + ${bindir}/nm \ + ${bindir}/objcopy \ + ${bindir}/objdump \ + ${bindir}/ranlib \ + ${bindir}/readelf \ + ${bindir}/size \ + ${bindir}/strings \ + ${bindir}/strip" + +SRC_URI = \ + "http://ftp.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \ + file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \ + file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \ + file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \ + file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \ + file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \ + file://binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch;patch=1 \ + file://binutils-uclibc-702-binutils-skip-comments.patch;patch=1" + +S = "${WORKDIR}/binutils-${PV}" +B = "${S}/build.${HOST_SYS}.${TARGET_SYS}" + +EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \ + --enable-shared" + +# This is necessary due to a bug in the binutils Makefiles +EXTRA_OEMAKE = "configure-build-libiberty all" + +export AR = "${HOST_PREFIX}ar" +export AS = "${HOST_PREFIX}as" +export LD = "${HOST_PREFIX}ld" +export NM = "${HOST_PREFIX}nm" +export RANLIB = "${HOST_PREFIX}ranlib" +export OBJCOPY = "${HOST_PREFIX}objcopy" +export OBJDUMP = "${HOST_PREFIX}objdump" + +export AR_FOR_TARGET = "${TARGET_PREFIX}ar" +export AS_FOR_TARGET = "${TARGET_PREFIX}as" +export LD_FOR_TARGET = "${TARGET_PREFIX}ld" +export NM_FOR_TARGET = "${TARGET_PREFIX}nm" +export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib" + +export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}" +export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}" + +export CC_FOR_BUILD = "${BUILD_CC}" +export CPP_FOR_BUILD = "${BUILD_CPP}" +export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}" + +export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}" + +do_configure () { + (cd ${S}; gnu-configize) || die "Failed to run gnu-configize" + oe_runconf +} + +do_stage () { + oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/ + oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/ + oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/ + install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/ + install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/ + install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/ + install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/ + install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/ + install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/ +} + +do_install () { + autotools_do_install + + # We don't really need these, so we'll remove them... + rm -rf ${D}${libdir}/ldscripts + + # Fix the /usr/${TARGET_SYS}/bin/* links + for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do + rm -f $l + ln -sf `echo ${prefix}/${TARGET_SYS}/bin \ + | tr -s / \ + | sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l + done + + # Install the libiberty header + install -d ${D}${includedir} + install -m 644 ${S}/include/ansidecl.h ${D}${includedir} + install -m 644 ${S}/include/libiberty.h ${D}${includedir} + + cd ${D}${bindir} + + # Symlinks for ease of running these on the native target + for p in ${TARGET_SYS}-* ; do + ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,` + done +} diff --git a/openembedded/packages/binutils/files/objdump_fix.patch b/openembedded/packages/binutils/files/objdump_fix.patch new file mode 100644 index 000000000..90ad732c0 --- /dev/null +++ b/openembedded/packages/binutils/files/objdump_fix.patch @@ -0,0 +1,134 @@ +From binutils-return-38148-listarch-binutils=sources dot redhat dot com at sources dot redhat dot com Tue Feb 22 19:24:15 2005 +Return-Path: <binutils-return-38148-listarch-binutils=sources dot redhat dot com at sources dot redhat dot com> +Delivered-To: listarch-binutils at sources dot redhat dot com +Received: (qmail 4446 invoked by alias); 22 Feb 2005 19:24:15 -0000 +Mailing-List: contact binutils-help at sources dot redhat dot com; run by ezmlm +Precedence: bulk +List-Subscribe: <mailto:binutils-subscribe at sources dot redhat dot com> +List-Archive: <http://sources.redhat.com/ml/binutils/> +List-Post: <mailto:binutils at sources dot redhat dot com> +List-Help: <mailto:binutils-help at sources dot redhat dot com>, <http://sources dot redhat dot com/ml/#faqs> +Sender: binutils-owner at sources dot redhat dot com +Delivered-To: mailing list binutils at sources dot redhat dot com +Received: (qmail 4401 invoked from network); 22 Feb 2005 19:24:08 -0000 +Received: from unknown (HELO bgo1smout1.broadpark.no) (217.13.4.94) + by sourceware dot org with SMTP; 22 Feb 2005 19:24:08 -0000 +Received: from bgo1sminn1.broadpark.no ([217.13.4.93]) + by bgo1smout1 dot broadpark dot no + (Sun Java System Messaging Server 6 dot 1 HotFix 0 dot 05 (built Oct 21 2004)) + with ESMTP id <0ICB007QZUZCC0C0 at bgo1smout1 dot broadpark dot no> for + binutils at sources dot redhat dot com; Tue, 22 Feb 2005 20:18:48 +0100 (CET) +Received: from [127.0.0.1] ([80.202.165.9]) by bgo1sminn1.broadpark.no + (Sun Java System Messaging Server 6 dot 1 HotFix 0 dot 05 (built Oct 21 2004)) + with ESMTP id <0ICB006NCVBVHE21 at bgo1sminn1 dot broadpark dot no> for + binutils at sources dot redhat dot com; Tue, 22 Feb 2005 20:26:20 +0100 (CET) +Date: Tue, 22 Feb 2005 20:24:08 +0100 +From: =?ISO-8859-1?Q?Stig_Petter_Olsr=F8d?= <stigpo at users dot sourceforge dot net> +Subject: [PATCH] objdump relocation fixes for ARM disassembly +To: binutils at sources dot redhat dot com +Message-id: <421B86D8.8080604@users.sourceforge.net> +MIME-version: 1.0 +Content-type: text/plain; charset=ISO-8859-1; format=flowed +Content-transfer-encoding: 7BIT +User-Agent: Mozilla Thunderbird 1.0 (Windows/20041206) + +Hello, + +objdump disassembly did not relocate correctly for the ARM processor. It seems +that the test for triggering the INSN_HAS_RELOC flag was void (one test killed the other, +since octets would always be zero) and all relocations would thus fail. I changed the test +so the flag is set when we are about to disassemble an insn that the current relocation +entry points to. I also changed objdump_print_addr to use the current relocation entry if +the insn has such an entry. This causes the symbol printed to be correct for both external +symbols (from the undefined section) and local symbols. + +This has only been tested for the ARM processor, but I don't think it should break other +DISASSEMBLER_NEEDS_RELOCS processors either. + + +binutils/ + +2005-02-22 Stig Petter Olsroed <stigpo@users.sourceforge.net> + + * objdump.c (disassemble_bytes): Fixed relocation check for + DISASSEMBLER_NEEDS_RELOCS platforms to properly trigger the + INSN_HAS_RELOC flag. Set the current relocation entry in + objdump_disasm_info to allow printing the proper symbol. + (objdump_print_addr): Use the relocation entry in + objdump_disasm_info to lookup the correct symbol for + DISASSEMBLER_NEEDS_RELOCS platforms. + +--- 1/binutils/objdump.c 2005-02-22 01:50:06.000000000 +0100 ++++ 2/binutils/objdump.c 2005-02-22 14:27:33.066960900 +0100 +@@ -128,6 +128,7 @@ + arelent ** dynrelbuf; + long dynrelcount; + disassembler_ftype disassemble_fn; ++ arelent * reloc; + }; + + /* Architecture to disassemble for, or default if NULL. */ +@@ -852,6 +853,8 @@ + { + struct objdump_disasm_info *aux; + asymbol *sym; ++ arelent *q; ++ int skip_find = 0; + + if (sorted_symcount < 1) + { +@@ -861,6 +864,22 @@ + } + + aux = (struct objdump_disasm_info *) info->application_data; ++ ++ q = aux->reloc; ++ if (q != NULL) ++ { ++ if (q->sym_ptr_ptr != NULL && *q->sym_ptr_ptr != NULL) ++ { ++ /* Adjust the vma to the reloc */ ++ vma += bfd_asymbol_value (*q->sym_ptr_ptr); ++ if (bfd_is_und_section (bfd_get_section (*q->sym_ptr_ptr))) ++ { ++ skip_find = 1; ++ sym = *q->sym_ptr_ptr; ++ } ++ } ++ } ++ if (!skip_find) + sym = find_symbol_for_address (vma, info, NULL); + objdump_print_addr_with_sym (aux->abfd, aux->sec, sym, vma, info, + skip_zeroes); +@@ -1350,16 +1369,22 @@ + info->bytes_per_chunk = 0; + + #ifdef DISASSEMBLER_NEEDS_RELOCS +- /* FIXME: This is wrong. It tests the number of octets +- in the last instruction, not the current one. */ +- if (*relppp < relppend +- && (**relppp)->address >= rel_offset + addr_offset +- && ((**relppp)->address +- < rel_offset + addr_offset + octets / opb)) ++ /* Check if the current relocation entry applies to the ++ instruction we are about to disassemble. ++ This works for ARM at least. ++ */ ++ if ((*relppp) < relppend ++ && ((**relppp)->address == rel_offset + addr_offset)) ++ { + info->flags = INSN_HAS_RELOC; ++ aux->reloc = **relppp; ++ } + else + #endif ++ { + info->flags = 0; ++ aux->reloc = NULL; ++ } + + octets = (*disassemble_fn) (section->vma + addr_offset, info); + info->fprintf_func = (fprintf_ftype) fprintf; + + + diff --git a/openembedded/packages/gcc/gcc-cross-initial_csl-arm-2005q3.bb b/openembedded/packages/gcc/gcc-cross-initial_csl-arm-2005q3.bb new file mode 100644 index 000000000..48c80864e --- /dev/null +++ b/openembedded/packages/gcc/gcc-cross-initial_csl-arm-2005q3.bb @@ -0,0 +1,28 @@ +include gcc-cross_${PV}.bb + +DEPENDS = "virtual/${TARGET_PREFIX}binutils" +DEPENDS += "${@['virtual/${TARGET_PREFIX}libc-initial',''][bb.data.getVar('TARGET_ARCH', d, 1) in ['arm', 'armeb', 'mips', 'mipsel']]}" +PROVIDES = "virtual/${TARGET_PREFIX}gcc-initial" +PACKAGES = "" + +# This is intended to be a -very- basic config +EXTRA_OECONF = "--with-local-prefix=${CROSS_DIR}/${TARGET_SYS} \ + --with-newlib \ + --disable-shared \ + --disable-threads \ + --disable-multilib \ + --disable-__cxa_atexit \ + --enable-languages=c \ + --enable-target-optspace \ + --program-prefix=${TARGET_PREFIX} \ + ${@get_gcc_fpu_setting(bb, d)}" + +do_stage_prepend () { + mkdir -p ${CROSS_DIR}/lib/gcc/${TARGET_SYS}/${BINV} + ln -sf libgcc.a ${CROSS_DIR}/lib/gcc/${TARGET_SYS}/${BINV}/libgcc_eh.a +} + +# Override the method from gcc-cross so we don't try to install libgcc +do_install () { + oe_runmake 'DESTDIR=${D}' install +} diff --git a/openembedded/packages/gcc/gcc-cross_csl-arm-2005q3.bb b/openembedded/packages/gcc/gcc-cross_csl-arm-2005q3.bb new file mode 100644 index 000000000..93c58aca5 --- /dev/null +++ b/openembedded/packages/gcc/gcc-cross_csl-arm-2005q3.bb @@ -0,0 +1,15 @@ +include gcc_csl-arm-2005q3.bb +# path mangling, needed by the cross packaging +include gcc-paths-cross.inc +inherit cross +# NOTE: split PR. If the main .oe changes something that affects its *build* +# remember to increment this one too. +PR = "r0" + +DEPENDS = "virtual/${TARGET_PREFIX}binutils virtual/${TARGET_PREFIX}libc-for-gcc" +PROVIDES = "virtual/${TARGET_PREFIX}gcc virtual/${TARGET_PREFIX}g++" + +# cross build +include gcc3-cross-build.inc +# cross packaging +include gcc-package-cross.inc diff --git a/openembedded/packages/gcc/gcc-csl-arm/15342.patch b/openembedded/packages/gcc/gcc-csl-arm/15342.patch new file mode 100644 index 000000000..d0f3e72d4 --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/15342.patch @@ -0,0 +1,22 @@ +--- gcc/gcc/regrename.c~ 2004-01-14 17:55:20.000000000 +0000 ++++ gcc/gcc/regrename.c 2005-02-28 07:24:25.893015200 +0000 +@@ -671,7 +671,8 @@ + + case SET: + scan_rtx (insn, &SET_SRC (x), class, action, OP_IN, 0); +- scan_rtx (insn, &SET_DEST (x), class, action, OP_OUT, 0); ++ scan_rtx (insn, &SET_DEST (x), class, action, ++ GET_CODE (PATTERN (insn)) == COND_EXEC ? OP_INOUT : OP_OUT, 0); + return; + + case STRICT_LOW_PART: +@@ -696,7 +697,8 @@ + abort (); + + case CLOBBER: +- scan_rtx (insn, &SET_DEST (x), class, action, OP_OUT, 1); ++ scan_rtx (insn, &SET_DEST (x), class, action, ++ GET_CODE (PATTERN (insn)) == COND_EXEC ? OP_INOUT : OP_OUT, 0); + return; + + case EXPR_LIST: diff --git a/openembedded/packages/gcc/gcc-csl-arm/gcc-3.4.0-arm-lib1asm.patch b/openembedded/packages/gcc/gcc-csl-arm/gcc-3.4.0-arm-lib1asm.patch new file mode 100644 index 000000000..cf17da6a0 --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/gcc-3.4.0-arm-lib1asm.patch @@ -0,0 +1,24 @@ +# Fixes errors like the following when building glibc (or any other executable +# or shared library) when using gcc 3.4.0 for ARM with softfloat: +# +# .../libc_pic.os(.text+0x15834): In function `__modf': undefined reference to `__subdf3' +# .../libc_pic.os(.text+0x158b8): In function `__modf': undefined reference to `__subdf3' +# .../libc_pic.os(.text+0x1590c): In function `scalbn': undefined reference to `__muldf3' +# .../libc_pic.os(.text+0x15e94): In function `__ldexpf': undefined reference to `__eqsf2' +# .../libc_pic.os(.text+0xcee4c): In function `monstartup': undefined reference to `__fixsfsi' + +diff -urNd gcc-3.4.0-orig/gcc/config/arm/t-linux gcc-3.4.0/gcc/config/arm/t-linux +--- gcc-3.4.0-orig/gcc/config/arm/t-linux 2003-09-20 23:09:07.000000000 +0200 ++++ gcc-3.4.0/gcc/config/arm/t-linux 2004-05-01 20:31:59.102846400 +0200 +@@ -4,7 +4,10 @@ + LIBGCC2_DEBUG_CFLAGS = -g0 + + LIB1ASMSRC = arm/lib1funcs.asm +-LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx ++LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \ ++ _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \ ++ _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \ ++ _fixsfsi _fixunssfsi _floatdidf _floatdisf + + # MULTILIB_OPTIONS = mhard-float/msoft-float + # MULTILIB_DIRNAMES = hard-float soft-float diff --git a/openembedded/packages/gcc/gcc-csl-arm/gcc34-arm-tune.patch b/openembedded/packages/gcc/gcc-csl-arm/gcc34-arm-tune.patch new file mode 100644 index 000000000..cdb20bef9 --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/gcc34-arm-tune.patch @@ -0,0 +1,9 @@ +--- gcc-3.4.0/gcc/config/arm/linux-elf.h.arm-tune 2004-01-31 01:18:11.000000000 -0500 ++++ gcc-3.4.0/gcc/config/arm/linux-elf.h 2004-04-24 18:19:10.000000000 -0400 +@@ -126,3 +126,6 @@ + + #define LINK_GCC_C_SEQUENCE_SPEC \ + "%{static:--start-group} %G %L %{static:--end-group}%{!static:%G}" ++ ++/* Tune for XScale. */ ++#define TARGET_TUNE_DEFAULT TARGET_CPU_xscale diff --git a/openembedded/packages/gcc/gcc-csl-arm/gcc_optab_arm.patch b/openembedded/packages/gcc/gcc-csl-arm/gcc_optab_arm.patch new file mode 100644 index 000000000..fa21b2655 --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/gcc_optab_arm.patch @@ -0,0 +1,95 @@ +ARM is the only architecture that has a helper function that returns +an unbiased result. This fix is trivial enough that we can show it +doesn't effect any of the other arches. Can we consider this a +regression fix since it used to work until the helper was added :} + +Tested with no regressions on x86_64-pc-linux-gnu and arm-none-eabi. + +Cheers, +Carlos. +-- +Carlos O'Donell +CodeSourcery +carlos@codesourcery.com +(650) 331-3385 x716 + +gcc/ + +2006-01-27 Carlos O'Donell <carlos@codesourcery.com> + + * optabs.c (prepare_cmp_insn): If unbaised and unsigned then bias + the comparison routine return. + +gcc/testsuite/ + +2006-01-27 Carlos O'Donell <carlos@codesourcery.com> + + * gcc.dg/unsigned-long-compare.c: New test. + +Index: gcc/optabs.c +=================================================================== +--- 1/gcc/optabs.c (revision 110300) ++++ 2/gcc/optabs.c (working copy) +@@ -3711,18 +3711,24 @@ + result = emit_library_call_value (libfunc, NULL_RTX, LCT_CONST_MAKE_BLOCK, + word_mode, 2, x, mode, y, mode); + ++ /* There are two kinds of comparison routines. Biased routines ++ return 0/1/2, and unbiased routines return -1/0/1. Other parts ++ of gcc expect that the comparison operation is equivalent ++ to the modified comparison. For signed comparisons compare the ++ result against 1 in the unbiased case, and zero in the biased ++ case. For unsigned comparisons always compare against 1 after ++ biasing the unbased result by adding 1. This gives us a way to ++ represent LTU. */ + *px = result; + *pmode = word_mode; +- if (TARGET_LIB_INT_CMP_BIASED) +- /* Integer comparison returns a result that must be compared +- against 1, so that even if we do an unsigned compare +- afterward, there is still a value that can represent the +- result "less than". */ +- *py = const1_rtx; +- else ++ *py = const1_rtx; ++ ++ if (!TARGET_LIB_INT_CMP_BIASED) + { +- *py = const0_rtx; +- *punsignedp = 1; ++ if (*punsignedp) ++ *px = plus_constant (result, 1); ++ else ++ *py = const0_rtx; + } + return; + } +Index: gcc/testsuite/gcc.dg/unsigned-long-compare.c +=================================================================== +--- 1/gcc/testsuite/gcc.dg/unsigned-long-compare.c (revision 0) ++++ 2/gcc/testsuite/gcc.dg/unsigned-long-compare.c (revision 0) +@@ -0,0 +1,24 @@ ++/* Copyright (C) 2006 Free Software Foundation, Inc. */ ++/* Contributed by Carlos O'Donell on 2006-01-27 */ ++ ++/* Test a division corner case where the expression simplifies ++ to a comparison, and the optab expansion is wrong. The optab ++ expansion emits a function whose return is unbiased and needs ++ adjustment. */ ++/* Origin: Carlos O'Donell <carlos@codesourcery.com> */ ++/* { dg-do run { target arm-*-*eabi* } } */ ++/* { dg-options "" } */ ++#include <stdlib.h> ++ ++#define BIG_CONSTANT 0xFFFFFFFF80000000ULL ++ ++int main (void) ++{ ++ unsigned long long OneULL = 1ULL; ++ unsigned long long result; ++ ++ result = OneULL / BIG_CONSTANT; ++ if (result) ++ abort (); ++ exit (0); ++} diff --git a/openembedded/packages/gcc/gcc-csl-arm/no-libfloat.patch b/openembedded/packages/gcc/gcc-csl-arm/no-libfloat.patch new file mode 100644 index 000000000..e5d12cfb4 --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/no-libfloat.patch @@ -0,0 +1,11 @@ +--- gcc/gcc/config/arm/linux-elf.h.old 2005-04-20 00:46:28.923375320 +0100 ++++ gcc/gcc/config/arm/linux-elf.h 2005-04-20 00:46:34.181575952 +0100 +@@ -56,7 +56,7 @@ + %{shared:-lc} \ + %{!shared:%{profile:-lc_p}%{!profile:-lc}}" + +-#define LIBGCC_SPEC "%{msoft-float:-lfloat} %{mfloat-abi=soft*:-lfloat} -lgcc" ++#define LIBGCC_SPEC "-lgcc" + + /* Provide a STARTFILE_SPEC appropriate for GNU/Linux. Here we add + the GNU/Linux magical crtbegin.o file (see crtstuff.c) which diff --git a/openembedded/packages/gcc/gcc-csl-arm/pic-without-sl.patch b/openembedded/packages/gcc/gcc-csl-arm/pic-without-sl.patch new file mode 100644 index 000000000..9a49794da --- /dev/null +++ b/openembedded/packages/gcc/gcc-csl-arm/pic-without-sl.patch @@ -0,0 +1,303 @@ +Index: gcc/config/arm/arm-protos.h +=================================================================== +RCS file: /cvsroot/gcc/gcc/gcc/config/arm/arm-protos.h,v +retrieving revision 1.60.4.20 +diff -u -r1.60.4.20 arm-protos.h +--- gcc/config/arm/arm-protos.h 29 Mar 2005 03:00:11 -0000 1.60.4.20 ++++ gcc/config/arm/arm-protos.h 23 Apr 2005 04:41:06 -0000 +@@ -64,6 +64,7 @@ + extern enum reg_class vfp_secondary_reload_class (enum machine_mode, rtx); + extern int tls_symbolic_operand (rtx, enum machine_mode); + extern bool arm_tls_operand_p (rtx x); ++extern bool arm_pc_pic_operand_p (rtx x); + + /* Predicates. */ + extern int s_register_operand (rtx, enum machine_mode); +Index: gcc/config/arm/arm.c +=================================================================== +RCS file: /cvsroot/gcc/gcc/gcc/config/arm/arm.c,v +retrieving revision 1.303.2.79 +diff -u -r1.303.2.79 arm.c +--- gcc/config/arm/arm.c 12 Apr 2005 06:17:07 -0000 1.303.2.79 ++++ gcc/config/arm/arm.c 23 Apr 2005 04:41:09 -0000 +@@ -1003,7 +1003,7 @@ + + /* If stack checking is disabled, we can use r10 as the PIC register, + which keeps r9 available. */ +- if (flag_pic) ++ if (0 && flag_pic) + arm_pic_register = TARGET_APCS_STACK ? 9 : 10; + + if (TARGET_APCS_FLOAT) +@@ -3120,6 +3120,10 @@ + rtx + legitimize_pic_address (rtx orig, enum machine_mode mode, rtx reg) + { ++ if (GET_CODE (orig) == UNSPEC ++ && XINT (orig, 1) == UNSPEC_GOTSLOTPC) ++ abort (); ++ + if (GET_CODE (orig) == SYMBOL_REF + || GET_CODE (orig) == LABEL_REF) + { +@@ -3149,27 +3153,80 @@ + else + address = reg; + +- if (TARGET_ARM) +- emit_insn (gen_pic_load_addr_arm (address, orig)); +- else +- emit_insn (gen_pic_load_addr_thumb (address, orig)); ++ if (arm_pic_register != INVALID_REGNUM) ++ { ++ /* Using GP-based PIC addressing. */ ++ if (TARGET_ARM) ++ emit_insn (gen_pic_load_addr_arm (address, orig)); ++ else ++ emit_insn (gen_pic_load_addr_thumb (address, orig)); ++ ++ if ((GET_CODE (orig) == LABEL_REF ++ || (GET_CODE (orig) == SYMBOL_REF && ++ SYMBOL_REF_LOCAL_P (orig))) ++ && NEED_GOT_RELOC) ++ pic_ref = gen_rtx_PLUS (Pmode, pic_offset_table_rtx, address); ++ else ++ { ++ pic_ref = gen_rtx_MEM (Pmode, ++ gen_rtx_PLUS (Pmode, pic_offset_table_rtx, ++ address)); ++ RTX_UNCHANGING_P (pic_ref) = 1; ++ } + +- if ((GET_CODE (orig) == LABEL_REF +- || (GET_CODE (orig) == SYMBOL_REF && +- SYMBOL_REF_LOCAL_P (orig))) +- && NEED_GOT_RELOC) +- pic_ref = gen_rtx_PLUS (Pmode, pic_offset_table_rtx, address); ++ current_function_uses_pic_offset_table = 1; ++ } + else + { +- pic_ref = gen_rtx_MEM (Pmode, +- gen_rtx_PLUS (Pmode, pic_offset_table_rtx, +- address)); +- RTX_UNCHANGING_P (pic_ref) = 1; ++ /* Using PC-based PIC addressing. */ ++ rtx label, tmp; ++ int offset; ++ ++ label = gen_label_rtx (); ++ offset = TARGET_ARM ? 8 : 4; ++ ++ if (GET_CODE (orig) == LABEL_REF ++ || (GET_CODE (orig) == SYMBOL_REF && SYMBOL_REF_LOCAL_P (orig))) ++ { ++ /* This symbol is defined locally. We don't need a GOT entry. */ ++ tmp = gen_rtx_MINUS (Pmode, gen_rtx_UNSPEC (Pmode, gen_rtvec (1, orig), UNSPEC_PIC_SYM), gen_rtx_PLUS (Pmode, ++ gen_rtx_LABEL_REF (Pmode, label), ++ GEN_INT (offset))); ++ ++ load_tls_operand (tmp, address); ++ ++ if (TARGET_ARM) ++ emit_insn (gen_pic_add_dot_plus_eight (address, label)); ++ else ++ emit_insn (gen_pic_add_dot_plus_four (address, label)); ++ } ++ else ++ { ++ rtx x = gen_rtx_UNSPEC (Pmode, gen_rtvec (1, orig), UNSPEC_GOTSLOTPC); ++ rtx dummy_label; ++ ++ dummy_label = gen_label_rtx (); ++ LABEL_PRESERVE_P (dummy_label) = 1; ++ LABEL_NUSES (dummy_label) = 1; ++ ++ tmp = gen_rtx_MINUS (Pmode, x, gen_rtx_PLUS (Pmode, ++ gen_rtx_LABEL_REF (Pmode, label), ++ GEN_INT (offset))); ++ ++ load_tls_operand (tmp, address); ++ ++ if (TARGET_ARM) ++ emit_insn (gen_tls_load_dot_plus_eight (address, address, label, dummy_label)); ++ else ++ emit_insn (gen_tls_load_dot_plus_four (address, address, label, dummy_label)); ++ } ++ ++ pic_ref = address; + } + + insn = emit_move_insn (reg, pic_ref); + #endif +- current_function_uses_pic_offset_table = 1; ++ + /* Put a REG_EQUAL note on this insn, so that it can be optimized + by loop. */ + REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_EQUAL, orig, +@@ -3179,11 +3236,17 @@ + else if (GET_CODE (orig) == CONST) + { + rtx base, offset; ++ bool minus = FALSE; + + if (GET_CODE (XEXP (orig, 0)) == PLUS + && XEXP (XEXP (orig, 0), 0) == pic_offset_table_rtx) + return orig; + ++ if (GET_CODE (XEXP (orig, 0)) == MINUS ++ && GET_CODE (XEXP (XEXP (orig, 0), 0)) == UNSPEC ++ && XINT (XEXP (XEXP (orig, 0), 0), 1) == UNSPEC_GOTSLOTPC) ++ return orig; ++ + if (GET_CODE (XEXP (orig, 0)) == UNSPEC) + return orig; + +@@ -3201,6 +3264,13 @@ + offset = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode, + base == reg ? 0 : reg); + } ++ else if (GET_CODE (XEXP (orig, 0)) == MINUS) ++ { ++ minus = TRUE; ++ base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg); ++ offset = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode, ++ base == reg ? 0 : reg); ++ } + else + abort (); + +@@ -3228,7 +3298,7 @@ + return reg; + } + +- return gen_rtx_PLUS (Pmode, base, offset); ++ return minus ? gen_rtx_MINUS (Pmode, base, offset) : gen_rtx_PLUS (Pmode, base, offset); + } + + return orig; +@@ -3267,7 +3337,7 @@ + rtx l1, pic_tmp, pic_tmp2, pic_rtx; + rtx global_offset_table; + +- if (current_function_uses_pic_offset_table == 0 || TARGET_SINGLE_PIC_BASE) ++ if (current_function_uses_pic_offset_table == 0 || TARGET_SINGLE_PIC_BASE || arm_pic_register == INVALID_REGNUM) + return; + + if (!flag_pic) +@@ -3341,8 +3411,11 @@ + static int + pcrel_constant_p (rtx x) + { ++ if (GET_CODE (x) == CONST) ++ return pcrel_constant_p (XEXP (x, 0)); ++ + if (GET_CODE (x) == MINUS) +- return symbol_mentioned_p (XEXP (x, 0)) && label_mentioned_p (XEXP (x, 1)); ++ return (((GET_CODE (XEXP (x, 0)) == UNSPEC && XINT (XEXP (x, 0), 1) == UNSPEC_PIC_SYM)) || symbol_mentioned_p (XEXP (x, 0))) && label_mentioned_p (XEXP (x, 1)); + + if (GET_CODE (x) == UNSPEC + && XINT (x, 1) == UNSPEC_TLS +@@ -3946,12 +4019,32 @@ + return SYMBOL_REF_TLS_MODEL (op); + } + ++bool ++arm_pc_pic_operand_p (rtx op) ++{ ++ if (GET_CODE (op) == CONST ++ && GET_CODE (XEXP (op, 0)) == MINUS ++ && GET_CODE (XEXP (XEXP (op, 0), 0)) == UNSPEC ++ && XINT (XEXP (XEXP (op, 0), 0), 1) == UNSPEC_GOTSLOTPC) ++ return 1; ++ ++ if (GET_CODE (op) == CONST ++ && GET_CODE (XEXP (op, 0)) == MINUS ++ && GET_CODE (XEXP (XEXP (op, 0), 0)) == UNSPEC ++ && XINT (XEXP (XEXP (op, 0), 0), 1) == UNSPEC_PIC_SYM) ++ return 1; ++ ++ return 0; ++} ++ + /* Valid input to a move instruction. */ + int + move_input_operand (rtx op, enum machine_mode mode) + { + if (tls_symbolic_operand (op, mode)) + return 0; ++ if (pcrel_constant_p (op)) ++ return 1; + return general_operand (op, mode); + } + +@@ -15634,11 +15727,34 @@ + return TRUE; + } + ++static bool ++arm_emit_got_decoration (FILE *fp, rtx x) ++{ ++ rtx val; ++ ++ val = XVECEXP (x, 0, 0); ++ ++ fputs ("_gotslotpc_(", fp); ++ ++ output_addr_const (fp, val); ++ ++ fputc (')', fp); ++ ++ return TRUE; ++} ++ + bool + arm_output_addr_const_extra (FILE *fp, rtx x) + { + if (GET_CODE (x) == UNSPEC && XINT (x, 1) == UNSPEC_TLS) + return arm_emit_tls_decoration (fp, x); ++ else if (GET_CODE (x) == UNSPEC && XINT (x, 1) == UNSPEC_GOTSLOTPC) ++ return arm_emit_got_decoration (fp, x); ++ else if (GET_CODE (x) == UNSPEC && XINT (x, 1) == UNSPEC_PIC_SYM) ++ { ++ output_addr_const (fp, XVECEXP (x, 0, 0)); ++ return TRUE; ++ } + else if (GET_CODE (x) == CONST_VECTOR) + return arm_emit_vector_const (fp, x); + +Index: gcc/config/arm/arm.md +=================================================================== +RCS file: /cvsroot/gcc/gcc/gcc/config/arm/arm.md,v +retrieving revision 1.145.2.31 +diff -u -r1.145.2.31 arm.md +--- gcc/config/arm/arm.md 28 Mar 2005 19:04:37 -0000 1.145.2.31 ++++ gcc/config/arm/arm.md 23 Apr 2005 04:41:11 -0000 +@@ -88,6 +88,7 @@ + (UNSPEC_WMADDS 18) ; Used by the intrinsic form of the iWMMXt WMADDS instruction. + (UNSPEC_WMADDU 19) ; Used by the intrinsic form of the iWMMXt WMADDU instruction. + (UNSPEC_TLS 20) ; A symbol that has been treated properly for TLS usage. ++ (UNSPEC_GOTSLOTPC 21) + ] + ) + +@@ -4179,7 +4180,8 @@ + && (CONSTANT_P (operands[1]) + || symbol_mentioned_p (operands[1]) + || label_mentioned_p (operands[1])) +- && ! tls_mentioned_p (operands[1])) ++ && ! tls_mentioned_p (operands[1]) ++ && ! arm_pc_pic_operand_p (operands[1])) + operands[1] = legitimize_pic_address (operands[1], SImode, + (no_new_pseudos ? operands[0] : 0)); + } +@@ -4412,7 +4414,8 @@ + (mem:SI (unspec:SI [(plus:SI (match_dup 0) + (const (plus:SI (pc) (const_int 8))))] + UNSPEC_PIC_BASE))) +- (use (label_ref (match_operand 1 "" "")))])] ++ (use (label_ref (match_operand 1 "" ""))) ++ (use (label_ref (match_operand 1 "" "")))])] + "" + ) + diff --git a/openembedded/packages/gcc/gcc_csl-arm-2005q3.bb b/openembedded/packages/gcc/gcc_csl-arm-2005q3.bb new file mode 100644 index 000000000..62bacda14 --- /dev/null +++ b/openembedded/packages/gcc/gcc_csl-arm-2005q3.bb @@ -0,0 +1,27 @@ +DESCRIPTION = "The GNU cc and gcc C compilers." +HOMEPAGE = "http://www.gnu.org/software/gcc/" +SECTION = "devel" +LICENSE = "GPL" +BINV = "3.4.4" +PV = "3.4.4+csl-arm-2005q3" +PR = "r1" + +FILESDIR = "${FILE_DIRNAME}/gcc-csl-arm" + +inherit autotools gettext + +include gcc-package.inc + +SRC_URI = "http://www.codesourcery.com/public/gnu_toolchain/arm/2005q3-2/arm-2005q3-2-arm-none-linux-gnueabi.src.tar.bz2 \ + file://gcc_optab_arm.patch;patch=1" + +do_unpack2() { + cd ${WORKDIR} + tar -xvjf ./arm-2005q3-2-arm-none-linux-gnueabi/gcc-2005q3-2.tar.bz2 +} + +addtask unpack2 after do_unpack before do_patch + +include gcc3-build.inc + +S = "${WORKDIR}/gcc-2005q3" diff --git a/openembedded/packages/glibc/glibc-2.4/arm-longlong.patch b/openembedded/packages/glibc/glibc-2.4/arm-longlong.patch new file mode 100644 index 000000000..320a55524 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/arm-longlong.patch @@ -0,0 +1,58 @@ +--- glibc-2.4/stdlib/longlong.h.ark 2006-03-11 22:49:27.000000000 +0100 ++++ glibc-2.4/stdlib/longlong.h 2006-03-11 22:55:12.000000000 +0100 +@@ -206,6 +206,14 @@ + "rI" ((USItype) (bh)), \ + "r" ((USItype) (al)), \ + "rI" ((USItype) (bl)) __CLOBBER_CC) ++/* v3m and all higher arches have long multiply support. */ ++#if !defined(__ARM_ARCH_2__) && !defined(__ARM_ARCH_3__) ++#define umul_ppmm(xh, xl, a, b) \ ++ __asm__ ("umull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b)) ++#define UMUL_TIME 5 ++#define smul_ppmm(xh, xl, a, b) \ ++ __asm__ ("smull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b)) ++#else + #define umul_ppmm(xh, xl, a, b) \ + {register USItype __t0, __t1, __t2; \ + __asm__ ("%@ Inlined umul_ppmm\n" \ +@@ -227,7 +235,13 @@ + : "r" ((USItype) (a)), \ + "r" ((USItype) (b)) __CLOBBER_CC );} + #define UMUL_TIME 20 ++#endif + #define UDIV_TIME 100 ++#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) || defined(__ARM_ARCH_5TE__) ++#define count_leading_zeros(COUNT,X) ((COUNT) = __builtin_clz (X)) ++#define COUNT_LEADING_ZEROS_0 32 ++#endif ++ + #endif /* __arm__ */ + + #if defined (__hppa) && W_TYPE_SIZE == 32 +--- glibc-2.4/ports/sysdeps/arm/mp_clz_tab.c.ark 2006-03-11 22:56:43.000000000 +0100 ++++ glibc-2.4/ports/sysdeps/arm/mp_clz_tab.c 2006-03-11 22:58:19.000000000 +0100 +@@ -0,0 +1,24 @@ ++/* __clz_tab -- support for longlong.h ++ Copyright (C) 2004 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, write to the Free ++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ 02111-1307 USA. */ ++ ++#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) || defined(__ARM_ARCH_5TE__) ++/* Nothing required. */ ++#else ++#include <sysdeps/generic/mp_clz_tab.c> ++#endif diff --git a/openembedded/packages/glibc/glibc-2.4/arm-memcpy.patch b/openembedded/packages/glibc/glibc-2.4/arm-memcpy.patch new file mode 100644 index 000000000..bc2b3dab8 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/arm-memcpy.patch @@ -0,0 +1,758 @@ +--- /dev/null 2004-02-02 20:32:13.000000000 +0000 ++++ sysdeps/arm/memmove.S 2004-03-20 18:37:23.000000000 +0000 +@@ -0,0 +1,251 @@ ++/* ++ * Optimized memmove implementation for ARM processors ++ * ++ * Author: Nicolas Pitre ++ * Created: Dec 23, 2003 ++ * Copyright: (C) MontaVista Software, Inc. ++ * ++ * This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2.1 of the License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ */ ++ ++#include <sysdep.h> ++ ++ ++/* ++ * Endian independent macros for shifting bytes within registers. ++ */ ++#ifndef __ARMEB__ ++#define pull lsr ++#define push lsl ++#else ++#define pull lsl ++#define push lsr ++#endif ++ ++/* ++ * Enable data preload for architectures that support it (ARMv5 and above) ++ */ ++#if defined(__ARM_ARCH_5__) || \ ++ defined(__ARM_ARCH_5T__) || \ ++ defined(__ARM_ARCH_5TE__) ++#define PLD(code...) code ++#else ++#define PLD(code...) ++#endif ++ ++ ++/* char * memmove (char *dst, const char *src) */ ++ENTRY(memmove) ++ subs ip, r0, r1 ++ cmphi r2, ip ++ bls memcpy(PLT) ++ ++ stmfd sp!, {r0, r4, lr} ++ add r1, r1, r2 ++ add r0, r0, r2 ++ subs r2, r2, #4 ++ blt 25f ++ ands ip, r0, #3 ++ PLD( pld [r1, #-4] ) ++ bne 26f ++ ands ip, r1, #3 ++ bne 27f ++ ++19: subs r2, r2, #4 ++ blt 24f ++ subs r2, r2, #8 ++ blt 23f ++ subs r2, r2, #16 ++ blt 22f ++ ++ PLD( pld [r1, #-32] ) ++ PLD( subs r2, r2, #96 ) ++ stmfd sp!, {r5 - r8} ++ PLD( blt 21f ) ++ ++ PLD( @ cache alignment ) ++ PLD( ands ip, r1, #31 ) ++ PLD( pld [r1, #-64] ) ++ PLD( beq 20f ) ++ PLD( cmp r2, ip ) ++ PLD( pld [r1, #-96] ) ++ PLD( blt 20f ) ++ PLD( cmp ip, #16 ) ++ PLD( sub r2, r2, ip ) ++ PLD( ldmgedb r1!, {r3 - r6} ) ++ PLD( stmgedb r0!, {r3 - r6} ) ++ PLD( beq 20f ) ++ PLD( and ip, ip, #15 ) ++ PLD( cmp ip, #8 ) ++ PLD( ldr r3, [r1, #-4]! ) ++ PLD( ldrge r4, [r1, #-4]! ) ++ PLD( ldrgt r5, [r1, #-4]! ) ++ PLD( str r3, [r0, #-4]! ) ++ PLD( strge r4, [r0, #-4]! ) ++ PLD( strgt r5, [r0, #-4]! ) ++ ++20: PLD( pld [r1, #-96] ) ++ PLD( pld [r1, #-128] ) ++21: ldmdb r1!, {r3, r4, ip, lr} ++ subs r2, r2, #32 ++ stmdb r0!, {r3, r4, ip, lr} ++ ldmdb r1!, {r3, r4, ip, lr} ++ stmgedb r0!, {r3, r4, ip, lr} ++ ldmgedb r1!, {r3, r4, ip, lr} ++ stmgedb r0!, {r3, r4, ip, lr} ++ ldmgedb r1!, {r3, r4, ip, lr} ++ subges r2, r2, #32 ++ stmdb r0!, {r3, r4, ip, lr} ++ bge 20b ++ PLD( cmn r2, #96 ) ++ PLD( bge 21b ) ++ PLD( add r2, r2, #96 ) ++ tst r2, #31 ++ ldmfd sp!, {r5 - r8} ++ ldmeqfd sp!, {r0, r4, pc} ++ ++ tst r2, #16 ++22: ldmnedb r1!, {r3, r4, ip, lr} ++ stmnedb r0!, {r3, r4, ip, lr} ++ ++ tst r2, #8 ++23: ldmnedb r1!, {r3, r4} ++ stmnedb r0!, {r3, r4} ++ ++ tst r2, #4 ++24: ldrne r3, [r1, #-4]! ++ strne r3, [r0, #-4]! ++ ++25: ands r2, r2, #3 ++ ldmeqfd sp!, {r0, r4, pc} ++ ++ cmp r2, #2 ++ ldrb r3, [r1, #-1] ++ ldrgeb r4, [r1, #-2] ++ ldrgtb ip, [r1, #-3] ++ strb r3, [r0, #-1] ++ strgeb r4, [r0, #-2] ++ strgtb ip, [r0, #-3] ++ ldmfd sp!, {r0, r4, pc} ++ ++26: cmp ip, #2 ++ ldrb r3, [r1, #-1]! ++ ldrgeb r4, [r1, #-1]! ++ ldrgtb lr, [r1, #-1]! ++ strb r3, [r0, #-1]! ++ strgeb r4, [r0, #-1]! ++ strgtb lr, [r0, #-1]! ++ subs r2, r2, ip ++ blt 25b ++ ands ip, r1, #3 ++ beq 19b ++ ++27: bic r1, r1, #3 ++ cmp ip, #2 ++ ldr r3, [r1] ++ beq 35f ++ blt 36f ++ ++ ++ .macro backward_copy_shift push pull ++ ++ cmp r2, #12 ++ PLD( pld [r1, #-4] ) ++ blt 33f ++ subs r2, r2, #28 ++ stmfd sp!, {r5 - r9} ++ blt 31f ++ ++ PLD( subs r2, r2, #96 ) ++ PLD( pld [r1, #-32] ) ++ PLD( blt 30f ) ++ PLD( pld [r1, #-64] ) ++ ++ PLD( @ cache alignment ) ++ PLD( ands ip, r1, #31 ) ++ PLD( pld [r1, #-96] ) ++ PLD( beq 29f ) ++ PLD( cmp r2, ip ) ++ PLD( pld [r1, #-128] ) ++ PLD( blt 29f ) ++ PLD( sub r2, r2, ip ) ++28: PLD( mov r4, r3, push #\push ) ++ PLD( ldr r3, [r1, #-4]! ) ++ PLD( subs ip, ip, #4 ) ++ PLD( orr r4, r4, r3, pull #\pull ) ++ PLD( str r4, [r0, #-4]! ) ++ PLD( bgt 28b ) ++ ++29: PLD( pld [r1, #-128] ) ++30: mov lr, r3, push #\push ++ ldmdb r1!, {r3 - r9, ip} ++ subs r2, r2, #32 ++ orr lr, lr, ip, pull #\pull ++ mov ip, ip, push #\push ++ orr ip, ip, r9, pull #\pull ++ mov r9, r9, push #\push ++ orr r9, r9, r8, pull #\pull ++ mov r8, r8, push #\push ++ orr r8, r8, r7, pull #\pull ++ mov r7, r7, push #\push ++ orr r7, r7, r6, pull #\pull ++ mov r6, r6, push #\push ++ orr r6, r6, r5, pull #\pull ++ mov r5, r5, push #\push ++ orr r5, r5, r4, pull #\pull ++ mov r4, r4, push #\push ++ orr r4, r4, r3, pull #\pull ++ stmdb r0!, {r4 - r9, ip, lr} ++ bge 29b ++ PLD( cmn r2, #96 ) ++ PLD( bge 30b ) ++ PLD( add r2, r2, #96 ) ++ cmn r2, #16 ++ blt 32f ++31: mov r7, r3, push #\push ++ ldmdb r1!, {r3 - r6} ++ sub r2, r2, #16 ++ orr r7, r7, r6, pull #\pull ++ mov r6, r6, push #\push ++ orr r6, r6, r5, pull #\pull ++ mov r5, r5, push #\push ++ orr r5, r5, r4, pull #\pull ++ mov r4, r4, push #\push ++ orr r4, r4, r3, pull #\pull ++ stmdb r0!, {r4 - r7} ++32: adds r2, r2, #28 ++ ldmfd sp!, {r5 - r9} ++ blt 34f ++33: mov r4, r3, push #\push ++ ldr r3, [r1, #-4]! ++ subs r2, r2, #4 ++ orr r4, r4, r3, pull #\pull ++ str r4, [r0, #-4]! ++ bge 33b ++34: ++ .endm ++ ++ ++ backward_copy_shift push=8 pull=24 ++ add r1, r1, #3 ++ b 25b ++ ++35: backward_copy_shift push=16 pull=16 ++ add r1, r1, #2 ++ b 25b ++ ++36: backward_copy_shift push=24 pull=8 ++ add r1, r1, #1 ++ b 25b ++ ++ .size memmove, . - memmove ++END(memmove) ++libc_hidden_builtin_def (memmove) +--- /dev/null 2004-02-02 20:32:13.000000000 +0000 ++++ sysdeps/arm/bcopy.S 2004-03-20 18:37:48.000000000 +0000 +@@ -0,0 +1,255 @@ ++/* ++ * Optimized memmove implementation for ARM processors ++ * ++ * Author: Nicolas Pitre ++ * Created: Dec 23, 2003 ++ * Copyright: (C) MontaVista Software, Inc. ++ * ++ * This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2.1 of the License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ */ ++ ++#include <sysdep.h> ++ ++ ++/* ++ * Endian independent macros for shifting bytes within registers. ++ */ ++#ifndef __ARMEB__ ++#define pull lsr ++#define push lsl ++#else ++#define pull lsl ++#define push lsr ++#endif ++ ++/* ++ * Enable data preload for architectures that support it (ARMv5 and above) ++ */ ++#if defined(__ARM_ARCH_5__) || \ ++ defined(__ARM_ARCH_5T__) || \ ++ defined(__ARM_ARCH_5TE__) ++#define PLD(code...) code ++#else ++#define PLD(code...) ++#endif ++ ++dst .req r1 ++src .req r0 ++ ++/* void *bcopy (const char *src, char *dst, size_t size) */ ++ENTRY(bcopy) ++ subs ip, dst, src ++ cmphi r2, ip ++ movls r3, r0 ++ movls r0, r1 ++ movls r1, r3 ++ bls memcpy(PLT) ++ ++ stmfd sp!, {r4, lr} ++ add src, src, r2 ++ add dst, dst, r2 ++ subs r2, r2, #4 ++ blt 25f ++ ands ip, dst, #3 ++ PLD( pld [src, #-4] ) ++ bne 26f ++ ands ip, src, #3 ++ bne 27f ++ ++19: subs r2, r2, #4 ++ blt 24f ++ subs r2, r2, #8 ++ blt 23f ++ subs r2, r2, #16 ++ blt 22f ++ ++ PLD( pld [src, #-32] ) ++ PLD( subs r2, r2, #96 ) ++ stmfd sp!, {r5 - r8} ++ PLD( blt 21f ) ++ ++ PLD( @ cache alignment ) ++ PLD( ands ip, src, #31 ) ++ PLD( pld [src, #-64] ) ++ PLD( beq 20f ) ++ PLD( cmp r2, ip ) ++ PLD( pld [src, #-96] ) ++ PLD( blt 20f ) ++ PLD( cmp ip, #16 ) ++ PLD( sub r2, r2, ip ) ++ PLD( ldmgedb src!, {r3 - r6} ) ++ PLD( stmgedb dst!, {r3 - r6} ) ++ PLD( beq 20f ) ++ PLD( and ip, ip, #15 ) ++ PLD( cmp ip, #8 ) ++ PLD( ldr r3, [src, #-4]! ) ++ PLD( ldrge r4, [src, #-4]! ) ++ PLD( ldrgt r5, [src, #-4]! ) ++ PLD( str r3, [dst, #-4]! ) ++ PLD( strge r4, [dst, #-4]! ) ++ PLD( strgt r5, [dst, #-4]! ) ++ ++20: PLD( pld [src, #-96] ) ++ PLD( pld [src, #-128] ) ++21: ldmdb src!, {r3, r4, ip, lr} ++ subs r2, r2, #32 ++ stmdb dst!, {r3, r4, ip, lr} ++ ldmdb src!, {r3, r4, ip, lr} ++ stmgedb dst!, {r3, r4, ip, lr} ++ ldmgedb src!, {r3, r4, ip, lr} ++ stmgedb dst!, {r3, r4, ip, lr} ++ ldmgedb src!, {r3, r4, ip, lr} ++ subges r2, r2, #32 ++ stmdb dst!, {r3, r4, ip, lr} ++ bge 20b ++ PLD( cmn r2, #96 ) ++ PLD( bge 21b ) ++ PLD( add r2, r2, #96 ) ++ tst r2, #31 ++ ldmfd sp!, {r5 - r8} ++ ldmeqfd sp!, {r4, pc} ++ ++ tst r2, #16 ++22: ldmnedb src!, {r3, r4, ip, lr} ++ stmnedb dst!, {r3, r4, ip, lr} ++ ++ tst r2, #8 ++23: ldmnedb src!, {r3, r4} ++ stmnedb dst!, {r3, r4} ++ ++ tst r2, #4 ++24: ldrne r3, [src, #-4]! ++ strne r3, [dst, #-4]! ++ ++25: ands r2, r2, #3 ++ ldmeqfd sp!, {dst, r4, pc} ++ ++ cmp r2, #2 ++ ldrb r3, [src, #-1] ++ ldrgeb r4, [src, #-2] ++ ldrgtb ip, [src, #-3] ++ strb r3, [dst, #-1] ++ strgeb r4, [dst, #-2] ++ strgtb ip, [dst, #-3] ++ ldmfd sp!, {dst, r4, pc} ++ ++26: cmp ip, #2 ++ ldrb r3, [src, #-1]! ++ ldrgeb r4, [src, #-1]! ++ ldrgtb lr, [src, #-1]! ++ strb r3, [dst, #-1]! ++ strgeb r4, [dst, #-1]! ++ strgtb lr, [dst, #-1]! ++ subs r2, r2, ip ++ blt 25b ++ ands ip, src, #3 ++ beq 19b ++ ++27: bic src, src, #3 ++ cmp ip, #2 ++ ldr r3, [src] ++ beq 35f ++ blt 36f ++ ++ ++ .macro backward_copy_shift push pull ++ ++ cmp r2, #12 ++ PLD( pld [src, #-4] ) ++ blt 33f ++ subs r2, r2, #28 ++ stmfd sp!, {r5 - r9} ++ blt 31f ++ ++ PLD( subs r2, r2, #96 ) ++ PLD( pld [src, #-32] ) ++ PLD( blt 30f ) ++ PLD( pld [src, #-64] ) ++ ++ PLD( @ cache alignment ) ++ PLD( ands ip, src, #31 ) ++ PLD( pld [src, #-96] ) ++ PLD( beq 29f ) ++ PLD( cmp r2, ip ) ++ PLD( pld [src, #-128] ) ++ PLD( blt 29f ) ++ PLD( sub r2, r2, ip ) ++28: PLD( mov r4, r3, push #\push ) ++ PLD( ldr r3, [src, #-4]! ) ++ PLD( subs ip, ip, #4 ) ++ PLD( orr r4, r4, r3, pull #\pull ) ++ PLD( str r4, [dst, #-4]! ) ++ PLD( bgt 28b ) ++ ++29: PLD( pld [src, #-128] ) ++30: mov lr, r3, push #\push ++ ldmdb src!, {r3 - r9, ip} ++ subs r2, r2, #32 ++ orr lr, lr, ip, pull #\pull ++ mov ip, ip, push #\push ++ orr ip, ip, r9, pull #\pull ++ mov r9, r9, push #\push ++ orr r9, r9, r8, pull #\pull ++ mov r8, r8, push #\push ++ orr r8, r8, r7, pull #\pull ++ mov r7, r7, push #\push ++ orr r7, r7, r6, pull #\pull ++ mov r6, r6, push #\push ++ orr r6, r6, r5, pull #\pull ++ mov r5, r5, push #\push ++ orr r5, r5, r4, pull #\pull ++ mov r4, r4, push #\push ++ orr r4, r4, r3, pull #\pull ++ stmdb dst!, {r4 - r9, ip, lr} ++ bge 29b ++ PLD( cmn r2, #96 ) ++ PLD( bge 30b ) ++ PLD( add r2, r2, #96 ) ++ cmn r2, #16 ++ blt 32f ++31: mov r7, r3, push #\push ++ ldmdb src!, {r3 - r6} ++ sub r2, r2, #16 ++ orr r7, r7, r6, pull #\pull ++ mov r6, r6, push #\push ++ orr r6, r6, r5, pull #\pull ++ mov r5, r5, push #\push ++ orr r5, r5, r4, pull #\pull ++ mov r4, r4, push #\push ++ orr r4, r4, r3, pull #\pull ++ stmdb dst!, {r4 - r7} ++32: adds r2, r2, #28 ++ ldmfd sp!, {r5 - r9} ++ blt 34f ++33: mov r4, r3, push #\push ++ ldr r3, [src, #-4]! ++ subs r2, r2, #4 ++ orr r4, r4, r3, pull #\pull ++ str r4, [dst, #-4]! ++ bge 33b ++34: ++ .endm ++ ++ ++ backward_copy_shift push=8 pull=24 ++ add src, src, #3 ++ b 25b ++ ++35: backward_copy_shift push=16 pull=16 ++ add src, src, #2 ++ b 25b ++ ++36: backward_copy_shift push=24 pull=8 ++ add src, src, #1 ++ b 25b ++ ++ .size bcopy, . - bcopy ++END(bcopy) + +--- /dev/null 2004-02-02 20:32:13.000000000 +0000 ++++ sysdeps/arm/memcpy.S 2004-05-02 14:33:22.000000000 +0100 +@@ -0,0 +1,242 @@ ++/* ++ * Optimized memcpy implementation for ARM processors ++ * ++ * Author: Nicolas Pitre ++ * Created: Dec 23, 2003 ++ * Copyright: (C) MontaVista Software, Inc. ++ * ++ * This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU Lesser General Public ++ * License as published by the Free Software Foundation; either ++ * version 2.1 of the License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * Lesser General Public License for more details. ++ */ ++ ++#include <sysdep.h> ++ ++ ++/* ++ * Endian independent macros for shifting bytes within registers. ++ */ ++#ifndef __ARMEB__ ++#define pull lsr ++#define push lsl ++#else ++#define pull lsl ++#define push lsr ++#endif ++ ++/* ++ * Enable data preload for architectures that support it (ARMv5 and above) ++ */ ++#if defined(__ARM_ARCH_5__) || \ ++ defined(__ARM_ARCH_5T__) || \ ++ defined(__ARM_ARCH_5TE__) ++#define PLD(code...) code ++#else ++#define PLD(code...) ++#endif ++ ++ ++/* char * memcpy (char *dst, const char *src) */ ++ ++ENTRY(memcpy) ++ subs r2, r2, #4 ++ stmfd sp!, {r0, r4, lr} ++ blt 7f ++ ands ip, r0, #3 ++ PLD( pld [r1, #0] ) ++ bne 8f ++ ands ip, r1, #3 ++ bne 9f ++ ++1: subs r2, r2, #4 ++ blt 6f ++ subs r2, r2, #8 ++ blt 5f ++ subs r2, r2, #16 ++ blt 4f ++ ++ PLD( subs r2, r2, #65 ) ++ stmfd sp!, {r5 - r8} ++ PLD( blt 3f ) ++ PLD( pld [r1, #32] ) ++ ++ PLD( @ cache alignment ) ++ PLD( ands ip, r1, #31 ) ++ PLD( pld [r1, #64] ) ++ PLD( beq 2f ) ++ PLD( rsb ip, ip, #32 ) ++ PLD( cmp r2, ip ) ++ PLD( pld [r1, #96] ) ++ PLD( blt 2f ) ++ PLD( cmp ip, #16 ) ++ PLD( sub r2, r2, ip ) ++ PLD( ldmgeia r1!, {r3 - r6} ) ++ PLD( stmgeia r0!, {r3 - r6} ) ++ PLD( beq 2f ) ++ PLD( and ip, ip, #15 ) ++ PLD( cmp ip, #8 ) ++ PLD( ldr r3, [r1], #4 ) ++ PLD( ldrge r4, [r1], #4 ) ++ PLD( ldrgt r5, [r1], #4 ) ++ PLD( str r3, [r0], #4 ) ++ PLD( strge r4, [r0], #4 ) ++ PLD( strgt r5, [r0], #4 ) ++ ++2: PLD( pld [r1, #96] ) ++3: ldmia r1!, {r3 - r8, ip, lr} ++ subs r2, r2, #32 ++ stmia r0!, {r3 - r8, ip, lr} ++ bge 2b ++ PLD( cmn r2, #65 ) ++ PLD( bge 3b ) ++ PLD( add r2, r2, #65 ) ++ tst r2, #31 ++ ldmfd sp!, {r5 - r8} ++ ldmeqfd sp!, {r0, r4, pc} ++ ++ tst r2, #16 ++4: ldmneia r1!, {r3, r4, ip, lr} ++ stmneia r0!, {r3, r4, ip, lr} ++ ++ tst r2, #8 ++5: ldmneia r1!, {r3, r4} ++ stmneia r0!, {r3, r4} ++ ++ tst r2, #4 ++6: ldrne r3, [r1], #4 ++ strne r3, [r0], #4 ++ ++7: ands r2, r2, #3 ++ ldmeqfd sp!, {r0, r4, pc} ++ ++ cmp r2, #2 ++ ldrb r3, [r1], #1 ++ ldrgeb r4, [r1], #1 ++ ldrgtb ip, [r1] ++ strb r3, [r0], #1 ++ strgeb r4, [r0], #1 ++ strgtb ip, [r0] ++ ldmfd sp!, {r0, r4, pc} ++ ++8: rsb ip, ip, #4 ++ cmp ip, #2 ++ ldrb r3, [r1], #1 ++ ldrgeb r4, [r1], #1 ++ ldrgtb lr, [r1], #1 ++ strb r3, [r0], #1 ++ strgeb r4, [r0], #1 ++ strgtb lr, [r0], #1 ++ subs r2, r2, ip ++ blt 7b ++ ands ip, r1, #3 ++ beq 1b ++ ++9: bic r1, r1, #3 ++ cmp ip, #2 ++ ldr lr, [r1], #4 ++ beq 17f ++ bgt 18f ++ ++ ++ .macro forward_copy_shift pull push ++ ++ cmp r2, #12 ++ PLD( pld [r1, #0] ) ++ blt 15f ++ subs r2, r2, #28 ++ stmfd sp!, {r5 - r9} ++ blt 13f ++ ++ PLD( subs r2, r2, #97 ) ++ PLD( blt 12f ) ++ PLD( pld [r1, #32] ) ++ ++ PLD( @ cache alignment ) ++ PLD( rsb ip, r1, #36 ) ++ PLD( pld [r1, #64] ) ++ PLD( ands ip, ip, #31 ) ++ PLD( pld [r1, #96] ) ++ PLD( beq 11f ) ++ PLD( cmp r2, ip ) ++ PLD( pld [r1, #128] ) ++ PLD( blt 11f ) ++ PLD( sub r2, r2, ip ) ++10: PLD( mov r3, lr, pull #\pull ) ++ PLD( ldr lr, [r1], #4 ) ++ PLD( subs ip, ip, #4 ) ++ PLD( orr r3, r3, lr, push #\push ) ++ PLD( str r3, [r0], #4 ) ++ PLD( bgt 10b ) ++ ++11: PLD( pld [r1, #128] ) ++12: mov r3, lr, pull #\pull ++ ldmia r1!, {r4 - r9, ip, lr} ++ subs r2, r2, #32 ++ orr r3, r3, r4, push #\push ++ mov r4, r4, pull #\pull ++ orr r4, r4, r5, push #\push ++ mov r5, r5, pull #\pull ++ orr r5, r5, r6, push #\push ++ mov r6, r6, pull #\pull ++ orr r6, r6, r7, push #\push ++ mov r7, r7, pull #\pull ++ orr r7, r7, r8, push #\push ++ mov r8, r8, pull #\pull ++ orr r8, r8, r9, push #\push ++ mov r9, r9, pull #\pull ++ orr r9, r9, ip, push #\push ++ mov ip, ip, pull #\pull ++ orr ip, ip, lr, push #\push ++ stmia r0!, {r3 - r9, ip} ++ bge 11b ++ PLD( cmn r2, #97 ) ++ PLD( bge 12b ) ++ PLD( add r2, r2, #97 ) ++ cmn r2, #16 ++ blt 14f ++13: mov r3, lr, pull #\pull ++ ldmia r1!, {r4 - r6, lr} ++ sub r2, r2, #16 ++ orr r3, r3, r4, push #\push ++ mov r4, r4, pull #\pull ++ orr r4, r4, r5, push #\push ++ mov r5, r5, pull #\pull ++ orr r5, r5, r6, push #\push ++ mov r6, r6, pull #\pull ++ orr r6, r6, lr, push #\push ++ stmia r0!, {r3 - r6} ++14: adds r2, r2, #28 ++ ldmfd sp!, {r5 - r9} ++ blt 16f ++15: mov r3, lr, pull #\pull ++ ldr lr, [r1], #4 ++ subs r2, r2, #4 ++ orr r3, r3, lr, push #\push ++ str r3, [r0], #4 ++ bge 15b ++16: ++ .endm ++ ++ ++ forward_copy_shift pull=8 push=24 ++ sub r1, r1, #3 ++ b 7b ++ ++17: forward_copy_shift pull=16 push=16 ++ sub r1, r1, #2 ++ b 7b ++ ++18: forward_copy_shift pull=24 push=8 ++ sub r1, r1, #1 ++ b 7b ++ ++ .size memcpy, . - memcpy ++END(memcpy) ++libc_hidden_builtin_def (memcpy) ++ diff --git a/openembedded/packages/glibc/glibc-2.4/dl-cache-libcmp.patch b/openembedded/packages/glibc/glibc-2.4/dl-cache-libcmp.patch new file mode 100644 index 000000000..2fedfa6db --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/dl-cache-libcmp.patch @@ -0,0 +1,10 @@ +--- glibc-2.4/elf/Versions.ark 2006-03-11 23:30:09.000000000 +0100 ++++ glibc-2.4/elf/Versions 2006-03-11 23:31:44.000000000 +0100 +@@ -63,5 +63,7 @@ + _dl_debug_state; + # Pointer protection. + __pointer_chk_guard; ++ # for ldconfig ++ _dl_cache_libcmp; + } + } diff --git a/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig-20041128.patch b/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig-20041128.patch new file mode 100644 index 000000000..451b6d4af --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig-20041128.patch @@ -0,0 +1,22 @@ + +# +# Patch managed by http://www.holgerschurig.de/patcher.html +# + +--- libc/elf/Makefile~dyn-ldconfig-20041128 ++++ libc/elf/Makefile +@@ -118,12 +118,13 @@ + + ifeq (yes,$(use-ldconfig)) + ifeq (yes,$(build-shared)) +-others-static += ldconfig ++#others-static += ldconfig + others += ldconfig + install-rootsbin += ldconfig + + ldconfig-modules := cache readlib xmalloc xstrdup chroot_canon + extra-objs += $(ldconfig-modules:=.o) ++CPPFLAGS-readlib.c = -DNOT_IN_libc=1 + + # To find xmalloc.c and xstrdup.c + vpath %.c ../locale/programs diff --git a/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig.patch b/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig.patch new file mode 100644 index 000000000..1041965d0 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/dyn-ldconfig.patch @@ -0,0 +1,62 @@ +--- elf/Makefile 13 Mar 2003 21:50:57 -0000 1.258 ++++ elf/Makefile 27 Mar 2003 20:36:07 -0000 +@@ -109,12 +109,13 @@ + + ifeq (yes,$(use-ldconfig)) + ifeq (yes,$(build-shared)) +-others-static += ldconfig ++#others-static += ldconfig + others += ldconfig + install-rootsbin += ldconfig + + ldconfig-modules := cache readlib xmalloc xstrdup chroot_canon + extra-objs += $(ldconfig-modules:=.o) ++CPPFLAGS-readlib.c = -DNOT_IN_libc=1 + + # To find xmalloc.c and xstrdup.c + vpath %.c ../locale/programs +--- elf/ldconfig.c 13 Jan 2003 08:53:14 -0000 1.31 ++++ elf/ldconfig.c 27 Mar 2003 20:36:09 -0000 +@@ -149,6 +149,9 @@ + static int + is_hwcap_platform (const char *name) + { ++#if 1 ++ return 0; ++#else + int hwcap_idx = _dl_string_hwcap (name); + + if (hwcap_idx != -1 && ((1 << hwcap_idx) & hwcap_mask)) +@@ -164,6 +167,7 @@ + #endif + + return 0; ++#endif + } + + /* Get hwcap (including platform) encoding of path. */ +@@ -175,6 +179,7 @@ + uint64_t hwcap = 0; + uint64_t h; + ++#if 0 + size_t len; + + len = strlen (str); +@@ -210,6 +215,7 @@ + *ptr = '\0'; + } + ++#endif + free (str); + return hwcap; + } +--- elf/Versions.old 2004-06-26 13:18:35.000000000 +0100 ++++ elf/Versions 2004-06-26 14:41:09.000000000 +0100 +@@ -54,5 +54,6 @@ + _dl_get_tls_static_info; _dl_allocate_tls_init; + _dl_tls_setup; _dl_rtld_di_serinfo; + _dl_make_stack_executable; ++ _dl_cache_libcmp; + } + } diff --git a/openembedded/packages/glibc/glibc-2.4/etc/ld.so.conf b/openembedded/packages/glibc/glibc-2.4/etc/ld.so.conf new file mode 100644 index 000000000..3f9b41aab --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/etc/ld.so.conf @@ -0,0 +1,3 @@ +/usr/local/lib +/opt/QtPalmtop/lib + diff --git a/openembedded/packages/glibc/glibc-2.4/fixup-aeabi-syscalls.patch b/openembedded/packages/glibc/glibc-2.4/fixup-aeabi-syscalls.patch new file mode 100644 index 000000000..fb733b919 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/fixup-aeabi-syscalls.patch @@ -0,0 +1,329 @@ +Fix up ARM EABI for removed syscalls +http://sourceware.org/ml/libc-ports/2006-03/msg00029.html + +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/socket.S +=================================================================== +--- glibc.orig/ports/sysdeps/unix/sysv/linux/arm/eabi/socket.S 2006-03-21 15:58:10.000000000 -0500 ++++ /dev/null 1970-01-01 00:00:00.000000000 +0000 +@@ -1,131 +0,0 @@ +-/* Copyright (C) 1995, 1996, 1997, 1998, 2003, 2005 +- Free Software Foundation, Inc. +- This file is part of the GNU C Library. +- +- The GNU C Library is free software; you can redistribute it and/or +- modify it under the terms of the GNU Lesser General Public +- License as published by the Free Software Foundation; either +- version 2.1 of the License, or (at your option) any later version. +- +- The GNU C Library is distributed in the hope that it will be useful, +- but WITHOUT ANY WARRANTY; without even the implied warranty of +- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- Lesser General Public License for more details. +- +- You should have received a copy of the GNU Lesser General Public +- License along with the GNU C Library; if not, write to the Free +- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA +- 02111-1307 USA. */ +- +-#include <sysdep-cancel.h> +-#include <socketcall.h> +- +-#define P(a, b) P2(a, b) +-#define P2(a, b) a##b +- +- .text +-/* The socket-oriented system calls are handled unusally in Linux. +- They are all gated through the single `socketcall' system call number. +- `socketcall' takes two arguments: the first is the subcode, specifying +- which socket function is being called; and the second is a pointer to +- the arguments to the specific function. +- +- The .S files for the other calls just #define socket and #include this. */ +- +-#ifndef __socket +-# ifndef NO_WEAK_ALIAS +-# define __socket P(__,socket) +-# else +-# define __socket socket +-# endif +-#endif +- +-#define PUSHARGS_1 str a1, [sp, $-8]!; .pad #8 +-#define PUSHARGS_2 stmfd sp!, {a1, a2}; .pad #8 +-#define PUSHARGS_3 stmfd sp!, {a1, a2, a3, a4}; .pad #16 /* a4 pushed for padding */ +-#define PUSHARGS_4 stmfd sp!, {a1, a2, a3, a4}; .pad #16 +-#define PUSHARGS_5 stmfd sp!, {a1, a2, a3, a4}; .pad #16 /* Caller has already pushed arg 5 */ +-#define PUSHARGS_6 stmfd sp!, {a1, a2, a3, a4}; .pad #16 +- +-#define POPARGS_1 add sp, sp, #8 +-#define POPARGS_2 add sp, sp, #8 +-#define POPARGS_3 add sp, sp, #16 +-#define POPARGS_4 add sp, sp, #16 +-#define POPARGS_5 add sp, sp, #16 +-#define POPARGS_6 add sp, sp, #16 +- +-#ifndef NARGS +-#define NARGS 3 /* If we were called with no wrapper, this is really socket() */ +-#endif +- +-#if defined NEED_CANCELLATION && defined CENABLE +- PSEUDO_PROLOGUE +-#endif +- +-.globl __socket +-ENTRY (__socket) +- .fnstart +- +- /* This code previously moved sp into ip and stored the args using +- stmdb ip!, {a1-a4}. It did not modify sp, so the stack never had +- to be restored after the syscall completed. It saved an +- instruction and meant no stack cleanup work was required. +- +- This will not work in the case of a socket call being interrupted +- by a signal. If the signal handler uses any stack the arguments +- to socket will be trashed. The results of a restart of any +- socket call are then unpredictable. */ +- +- /* Push args onto the stack. */ +- P(PUSHARGS_,NARGS) +- +-#if defined NEED_CANCELLATION && defined CENABLE +- SINGLE_THREAD_P +- bne 1f +-#endif +- +- /* Do the system call trap. */ +- mov a1, $P(SOCKOP_,socket) +- mov a2, sp +- DO_CALL (socketcall, 0) +- +- /* Pop args off the stack */ +- P(POPARGS_,NARGS) +- +- /* r0 is < 0 if there was an error. */ +- cmn r0, $124 +- RETINSTR(cc, r14) +- b PLTJMP(SYSCALL_ERROR) +- +-#if defined NEED_CANCELLATION && defined CENABLE +-1: +- stmfd sp!, {r7, lr} +- .save {r7, lr} +- CENABLE +- mov ip, r0 +- +- mov r0, #P(SOCKOP_,socket) +- add r1, sp, #8 +- mov r7, #SYS_ify(socketcall) +- swi 0x0 +- +- mov r7, r0 +- mov r0, ip +- CDISABLE +- mov r0, r7 +- ldmfd sp!, {r7, lr} +- +- P(POPARGS_,NARGS) +- +- /* r0 is < 0 if there was an error. */ +- cmn r0, $124 +- RETINSTR(cc, r14) +- b PLTJMP(SYSCALL_ERROR) +-#endif +- +- .fnend +-PSEUDO_END (__socket) +- +-#ifndef NO_WEAK_ALIAS +-weak_alias (__socket, socket) +-#endif +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/syscalls.list +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/syscalls.list 2006-03-21 15:58:46.000000000 -0500 +@@ -0,0 +1,34 @@ ++# File name Caller Syscall name # args Strong name Weak names ++ ++# semaphore and shm system calls ++msgctl - msgctl i:iip __msgctl msgctl ++msgget - msgget i:ii __msgget msgget ++msgrcv - msgrcv Ci:ibnii __msgrcv msgrcv ++msgsnd - msgsnd Ci:ibni __msgsnd msgsnd ++shmat - shmat i:ipi __shmat shmat ++shmctl - shmctl i:iip __shmctl shmctl ++shmdt - shmdt i:s __shmdt shmdt ++shmget - shmget i:iii __shmget shmget ++semop - semop i:ipi __semop semop ++semtimedop - semtimedop i:ipip semtimedop ++semget - semget i:iii __semget semget ++semctl - semctl i:iiii __semctl semctl ++ ++# proper socket implementations: ++accept - accept Ci:iBN __libc_accept __accept accept ++bind - bind i:ipi __bind bind ++connect - connect Ci:ipi __libc_connect __connect_internal __connect connect ++getpeername - getpeername i:ipp __getpeername getpeername ++getsockname - getsockname i:ipp __getsockname getsockname ++getsockopt - getsockopt i:iiiBN __getsockopt getsockopt ++listen - listen i:ii __listen listen ++recv - recv Ci:ibni __libc_recv __recv recv ++recvfrom - recvfrom Ci:ibniBN __libc_recvfrom __recvfrom recvfrom ++recvmsg - recvmsg Ci:ipi __libc_recvmsg __recvmsg recvmsg ++send - send Ci:ibni __libc_send __send send ++sendmsg - sendmsg Ci:ipi __libc_sendmsg __sendmsg sendmsg ++sendto - sendto Ci:ibnibn __libc_sendto __sendto sendto ++setsockopt - setsockopt i:iiibn __setsockopt setsockopt ++shutdown - shutdown i:ii __shutdown shutdown ++socket - socket i:iii __socket socket ++socketpair - socketpair i:iiif __socketpair socketpair +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/linuxthreads/sysdep-cancel.h +=================================================================== +--- glibc.orig/ports/sysdeps/unix/sysv/linux/arm/eabi/linuxthreads/sysdep-cancel.h 2006-03-21 15:58:10.000000000 -0500 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/linuxthreads/sysdep-cancel.h 2006-03-21 15:58:46.000000000 -0500 +@@ -53,9 +53,9 @@ + UNDOARGS_##args; \ + cmn r0, $4096; + +-/* DOARGS pushes four bytes on the stack for five arguments, and nothing +- otherwise. In order to preserve doubleword alignment, sometimes we must +- save an extra register. */ ++/* DOARGS pushes four bytes on the stack for five arguments, eight bytes for ++ six arguments, and nothing for fewer. In order to preserve doubleword ++ alignment, sometimes we must save an extra register. */ + + # define DOCARGS_0 stmfd sp!, {r7, lr} + # define UNDOCARGS_0 +@@ -81,6 +81,10 @@ + # define UNDOCARGS_5 ldmfd sp!, {r0, r1, r2, r3} + # define RESTORE_LR_5 ldmfd sp!, {r4, r7, lr} + ++# define DOCARGS_6 stmfd sp!, {r0, r1, r2, r3, r7, lr} ++# define UNDOCARGS_6 ldmfd sp!, {r0, r1, r2, r3} ++# define RESTORE_LR_6 RESTORE_LR_0 ++ + # ifdef IS_IN_libpthread + # define CENABLE bl PLTJMP(__pthread_enable_asynccancel) + # define CDISABLE bl PLTJMP(__pthread_disable_asynccancel) +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/nptl/sysdep-cancel.h +=================================================================== +--- glibc.orig/ports/sysdeps/unix/sysv/linux/arm/eabi/nptl/sysdep-cancel.h 2006-03-21 15:58:10.000000000 -0500 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/nptl/sysdep-cancel.h 2006-03-21 15:58:46.000000000 -0500 +@@ -64,9 +64,9 @@ + UNDOARGS_##args; \ + cmn r0, $4096; + +-/* DOARGS pushes four bytes on the stack for five arguments, and nothing +- otherwise. In order to preserve doubleword alignment, sometimes we must +- save an extra register. */ ++/* DOARGS pushes four bytes on the stack for five arguments, eight bytes for ++ six arguments, and nothing for fewer. In order to preserve doubleword ++ alignment, sometimes we must save an extra register. */ + + # define RESTART_UNWIND .fnend; .fnstart; .save {r7, lr} + +@@ -94,6 +94,10 @@ + # define UNDOCARGS_5 ldmfd sp!, {r0, r1, r2, r3}; .fnend; .fnstart; .save {r4}; .save {r7, lr}; .pad #4 + # define RESTORE_LR_5 ldmfd sp!, {r4, r7, lr} + ++# define DOCARGS_6 .save {r4, r5}; stmfd sp!, {r0, r1, r2, r3, r7, lr}; .save {r7, lr}; .pad #20 ++# define UNDOCARGS_6 ldmfd sp!, {r0, r1, r2, r3}; .fnend; .fnstart; .save {r4, r5}; .save {r7, lr} ++# define RESTORE_LR_6 RESTORE_LR_0 ++ + # ifdef IS_IN_libpthread + # define CENABLE bl PLTJMP(__pthread_enable_asynccancel) + # define CDISABLE bl PLTJMP(__pthread_disable_asynccancel) +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h +=================================================================== +--- glibc.orig/ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h 2006-03-21 15:58:10.000000000 -0500 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h 2006-03-21 15:58:46.000000000 -0500 +@@ -1,4 +1,4 @@ +-/* Copyright (C) 2005 ++/* Copyright (C) 2005, 2006 + Free Software Foundation, Inc. + + This file is part of the GNU C Library. +@@ -29,6 +29,12 @@ + # error Kernel headers are too old + #endif + ++/* Don't use stime, even if the kernel headers define it. We have ++ settimeofday, and some EABI kernels have removed stime. Similarly ++ use setitimer to implement alarm. */ ++#undef __NR_stime ++#undef __NR_alarm ++ + /* The ARM EABI user interface passes the syscall number in r7, instead + of in the swi. This is more efficient, because the kernel does not need + to fetch the swi from memory to find out the number; which can be painful +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/umount.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/eabi/umount.c 2006-03-21 15:58:46.000000000 -0500 +@@ -0,0 +1,31 @@ ++/* Copyright (C) 2000, 2001 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ Contributed by David Huggins-Daines <dhd@debian.org>, 2000. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, write to the Free ++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ 02111-1307 USA. */ ++ ++/* Since we don't have an oldumount system call, do what the kernel ++ does down here. */ ++ ++extern long int __umount2 (const char *name, int flags); ++ ++long int ++__umount (const char *name) ++{ ++ return __umount2 (name, 0); ++} ++ ++weak_alias (__umount, umount); +Index: glibc/ports/sysdeps/unix/sysv/linux/arm/kernel-features.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ glibc/ports/sysdeps/unix/sysv/linux/arm/kernel-features.h 2006-03-20 17:26:58.000000000 -0500 +@@ -0,0 +1,31 @@ ++/* Set flags signalling availability of kernel features based on given ++ kernel version number. ++ Copyright (C) 2006 Free Software Foundation, Inc. ++ This file is part of the GNU C Library. ++ ++ The GNU C Library is free software; you can redistribute it and/or ++ modify it under the terms of the GNU Lesser General Public ++ License as published by the Free Software Foundation; either ++ version 2.1 of the License, or (at your option) any later version. ++ ++ The GNU C Library is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ Lesser General Public License for more details. ++ ++ You should have received a copy of the GNU Lesser General Public ++ License along with the GNU C Library; if not, write to the Free ++ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA ++ 02111-1307 USA. */ ++ ++/* The utimes syscall was added before 2.6.1. */ ++#if __LINUX_KERNEL_VERSION >= 132609 ++# define __ASSUME_UTIMES 1 ++#endif ++ ++/* The new getrlimit syscall was added sometime before 2.4.6. */ ++#if __LINUX_KERNEL_VERSION >= 132102 ++#define __ASSUME_NEW_GETRLIMIT_SYSCALL 1 ++#endif ++ ++#include_next <kernel-features.h> diff --git a/openembedded/packages/glibc/glibc-2.4/generic-bits_select.h b/openembedded/packages/glibc/glibc-2.4/generic-bits_select.h new file mode 100644 index 000000000..47e7dedc3 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/generic-bits_select.h @@ -0,0 +1,35 @@ +/* Copyright (C) 1997, 1998, 2001 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _SYS_SELECT_H +# error "Never use <bits/select.h> directly; include <sys/select.h> instead." +#endif + + +/* We don't use `memset' because this would require a prototype and + the array isn't too big. */ +#define __FD_ZERO(s) \ + do { \ + unsigned int __i; \ + fd_set *__arr = (s); \ + for (__i = 0; __i < sizeof (fd_set) / sizeof (__fd_mask); ++__i) \ + __FDS_BITS (__arr)[__i] = 0; \ + } while (0) +#define __FD_SET(d, s) (__FDS_BITS (s)[__FDELT(d)] |= __FDMASK(d)) +#define __FD_CLR(d, s) (__FDS_BITS (s)[__FDELT(d)] &= ~__FDMASK(d)) +#define __FD_ISSET(d, s) ((__FDS_BITS (s)[__FDELT(d)] & __FDMASK(d)) != 0) diff --git a/openembedded/packages/glibc/glibc-2.4/generic-bits_time.h b/openembedded/packages/glibc/glibc-2.4/generic-bits_time.h new file mode 100644 index 000000000..b3184d1de --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/generic-bits_time.h @@ -0,0 +1,75 @@ +/* System-dependent timing definitions. Generic version. + Copyright (C) 1996,1997,1999-2002,2003 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* + * Never include this file directly; use <time.h> instead. + */ + +#ifndef __need_timeval +# ifndef _BITS_TIME_H +# define _BITS_TIME_H 1 + +/* ISO/IEC 9899:1990 7.12.1: <time.h> + The macro `CLOCKS_PER_SEC' is the number per second of the value + returned by the `clock' function. */ +/* CAE XSH, Issue 4, Version 2: <time.h> + The value of CLOCKS_PER_SEC is required to be 1 million on all + XSI-conformant systems. */ +# define CLOCKS_PER_SEC 1000000l + +# if !defined __STRICT_ANSI__ && !defined __USE_XOPEN2K +/* Even though CLOCKS_PER_SEC has such a strange value CLK_TCK + presents the real value for clock ticks per second for the system. */ +# include <bits/types.h> +extern long int __sysconf (int); +# define CLK_TCK ((__clock_t) __sysconf (2)) /* 2 is _SC_CLK_TCK */ +# endif + +# ifdef __USE_POSIX199309 +/* Identifier for system-wide realtime clock. */ +# define CLOCK_REALTIME 0 +/* Monotonic system-wide clock. */ +# define CLOCK_MONOTONIC 1 +/* High-resolution timer from the CPU. */ +# define CLOCK_PROCESS_CPUTIME_ID 2 +/* Thread-specific CPU-time clock. */ +# define CLOCK_THREAD_CPUTIME_ID 3 + +/* Flag to indicate time is absolute. */ +# define TIMER_ABSTIME 1 +# endif + +# endif /* bits/time.h */ +#endif + +#ifdef __need_timeval +# undef __need_timeval +# ifndef _STRUCT_TIMEVAL +# define _STRUCT_TIMEVAL 1 +# include <bits/types.h> + +/* A time value that is accurate to the nearest + microsecond but also has a range of years. */ +struct timeval + { + __time_t tv_sec; /* Seconds. */ + __suseconds_t tv_usec; /* Microseconds. */ + }; +# endif /* struct timeval */ +#endif /* need timeval */ diff --git a/openembedded/packages/glibc/glibc-2.4/generic-bits_types.h b/openembedded/packages/glibc/glibc-2.4/generic-bits_types.h new file mode 100644 index 000000000..65c8a9fe9 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/generic-bits_types.h @@ -0,0 +1,200 @@ +/* bits/types.h -- definitions of __*_t types underlying *_t types. + Copyright (C) 2002, 2003, 2004, 2005 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +/* + * Never include this file directly; use <sys/types.h> instead. + */ + +#ifndef _BITS_TYPES_H +#define _BITS_TYPES_H 1 + +#include <features.h> +#include <bits/wordsize.h> + +#define __need_size_t +#include <stddef.h> + +/* Convenience types. */ +typedef unsigned char __u_char; +typedef unsigned short int __u_short; +typedef unsigned int __u_int; +typedef unsigned long int __u_long; + +/* Fixed-size types, underlying types depend on word size and compiler. */ +typedef signed char __int8_t; +typedef unsigned char __uint8_t; +typedef signed short int __int16_t; +typedef unsigned short int __uint16_t; +typedef signed int __int32_t; +typedef unsigned int __uint32_t; +#if __WORDSIZE == 64 +typedef signed long int __int64_t; +typedef unsigned long int __uint64_t; +#elif defined __GLIBC_HAVE_LONG_LONG +__extension__ typedef signed long long int __int64_t; +__extension__ typedef unsigned long long int __uint64_t; +#endif + +/* quad_t is also 64 bits. */ +#if __WORDSIZE == 64 +typedef long int __quad_t; +typedef unsigned long int __u_quad_t; +#elif defined __GLIBC_HAVE_LONG_LONG +__extension__ typedef long long int __quad_t; +__extension__ typedef unsigned long long int __u_quad_t; +#else +typedef struct +{ + long __val[2]; +} __quad_t; +typedef struct +{ + __u_long __val[2]; +} __u_quad_t; +#endif + + +/* The machine-dependent file <bits/typesizes.h> defines __*_T_TYPE + macros for each of the OS types we define below. The definitions + of those macros must use the following macros for underlying types. + We define __S<SIZE>_TYPE and __U<SIZE>_TYPE for the signed and unsigned + variants of each of the following integer types on this machine. + + 16 -- "natural" 16-bit type (always short) + 32 -- "natural" 32-bit type (always int) + 64 -- "natural" 64-bit type (long or long long) + LONG32 -- 32-bit type, traditionally long + QUAD -- 64-bit type, always long long + WORD -- natural type of __WORDSIZE bits (int or long) + LONGWORD -- type of __WORDSIZE bits, traditionally long + + We distinguish WORD/LONGWORD, 32/LONG32, and 64/QUAD so that the + conventional uses of `long' or `long long' type modifiers match the + types we define, even when a less-adorned type would be the same size. + This matters for (somewhat) portably writing printf/scanf formats for + these types, where using the appropriate l or ll format modifiers can + make the typedefs and the formats match up across all GNU platforms. If + we used `long' when it's 64 bits where `long long' is expected, then the + compiler would warn about the formats not matching the argument types, + and the programmer changing them to shut up the compiler would break the + program's portability. + + Here we assume what is presently the case in all the GCC configurations + we support: long long is always 64 bits, long is always word/address size, + and int is always 32 bits. */ + +#define __S16_TYPE short int +#define __U16_TYPE unsigned short int +#define __S32_TYPE int +#define __U32_TYPE unsigned int +#define __SLONGWORD_TYPE long int +#define __ULONGWORD_TYPE unsigned long int +#if __WORDSIZE == 32 +# define __SQUAD_TYPE __quad_t +# define __UQUAD_TYPE __u_quad_t +# define __SWORD_TYPE int +# define __UWORD_TYPE unsigned int +# define __SLONG32_TYPE long int +# define __ULONG32_TYPE unsigned long int +# define __S64_TYPE __quad_t +# define __U64_TYPE __u_quad_t +/* We want __extension__ before typedef's that use nonstandard base types + such as `long long' in C89 mode. */ +# define __STD_TYPE __extension__ typedef +#elif __WORDSIZE == 64 +# define __SQUAD_TYPE long int +# define __UQUAD_TYPE unsigned long int +# define __SWORD_TYPE long int +# define __UWORD_TYPE unsigned long int +# define __SLONG32_TYPE int +# define __ULONG32_TYPE unsigned int +# define __S64_TYPE long int +# define __U64_TYPE unsigned long int +/* No need to mark the typedef with __extension__. */ +# define __STD_TYPE typedef +#else +# error +#endif +#include <bits/typesizes.h> /* Defines __*_T_TYPE macros. */ + + +__STD_TYPE __DEV_T_TYPE __dev_t; /* Type of device numbers. */ +__STD_TYPE __UID_T_TYPE __uid_t; /* Type of user identifications. */ +__STD_TYPE __GID_T_TYPE __gid_t; /* Type of group identifications. */ +__STD_TYPE __INO_T_TYPE __ino_t; /* Type of file serial numbers. */ +__STD_TYPE __INO64_T_TYPE __ino64_t; /* Type of file serial numbers (LFS).*/ +__STD_TYPE __MODE_T_TYPE __mode_t; /* Type of file attribute bitmasks. */ +__STD_TYPE __NLINK_T_TYPE __nlink_t; /* Type of file link counts. */ +__STD_TYPE __OFF_T_TYPE __off_t; /* Type of file sizes and offsets. */ +__STD_TYPE __OFF64_T_TYPE __off64_t; /* Type of file sizes and offsets (LFS). */ +__STD_TYPE __PID_T_TYPE __pid_t; /* Type of process identifications. */ +__STD_TYPE __FSID_T_TYPE __fsid_t; /* Type of file system IDs. */ +__STD_TYPE __CLOCK_T_TYPE __clock_t; /* Type of CPU usage counts. */ +__STD_TYPE __RLIM_T_TYPE __rlim_t; /* Type for resource measurement. */ +__STD_TYPE __RLIM64_T_TYPE __rlim64_t; /* Type for resource measurement (LFS). */ +__STD_TYPE __ID_T_TYPE __id_t; /* General type for IDs. */ +__STD_TYPE __TIME_T_TYPE __time_t; /* Seconds since the Epoch. */ +__STD_TYPE __USECONDS_T_TYPE __useconds_t; /* Count of microseconds. */ +__STD_TYPE __SUSECONDS_T_TYPE __suseconds_t; /* Signed count of microseconds. */ + +__STD_TYPE __DADDR_T_TYPE __daddr_t; /* The type of a disk address. */ +__STD_TYPE __SWBLK_T_TYPE __swblk_t; /* Type of a swap block maybe? */ +__STD_TYPE __KEY_T_TYPE __key_t; /* Type of an IPC key. */ + +/* Clock ID used in clock and timer functions. */ +__STD_TYPE __CLOCKID_T_TYPE __clockid_t; + +/* Timer ID returned by `timer_create'. */ +__STD_TYPE __TIMER_T_TYPE __timer_t; + +/* Type to represent block size. */ +__STD_TYPE __BLKSIZE_T_TYPE __blksize_t; + +/* Types from the Large File Support interface. */ + +/* Type to count number of disk blocks. */ +__STD_TYPE __BLKCNT_T_TYPE __blkcnt_t; +__STD_TYPE __BLKCNT64_T_TYPE __blkcnt64_t; + +/* Type to count file system blocks. */ +__STD_TYPE __FSBLKCNT_T_TYPE __fsblkcnt_t; +__STD_TYPE __FSBLKCNT64_T_TYPE __fsblkcnt64_t; + +/* Type to count file system nodes. */ +__STD_TYPE __FSFILCNT_T_TYPE __fsfilcnt_t; +__STD_TYPE __FSFILCNT64_T_TYPE __fsfilcnt64_t; + +__STD_TYPE __SSIZE_T_TYPE __ssize_t; /* Type of a byte count, or error. */ + +/* These few don't really vary by system, they always correspond + to one of the other defined types. */ +typedef __off64_t __loff_t; /* Type of file sizes and offsets (LFS). */ +typedef __quad_t *__qaddr_t; +typedef char *__caddr_t; + +/* Duplicates info from stdint.h but this is used in unistd.h. */ +__STD_TYPE __SWORD_TYPE __intptr_t; + +/* Duplicate info from sys/socket.h. */ +__STD_TYPE __U32_TYPE __socklen_t; + + +#undef __STD_TYPE + +#endif /* bits/types.h */ diff --git a/openembedded/packages/glibc/glibc-2.4/generic-bits_typesizes.h b/openembedded/packages/glibc/glibc-2.4/generic-bits_typesizes.h new file mode 100644 index 000000000..e9226c417 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/generic-bits_typesizes.h @@ -0,0 +1,66 @@ +/* bits/typesizes.h -- underlying types for *_t. Generic version. + Copyright (C) 2002, 2003 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + 02111-1307 USA. */ + +#ifndef _BITS_TYPES_H +# error "Never include <bits/typesizes.h> directly; use <sys/types.h> instead." +#endif + +#ifndef _BITS_TYPESIZES_H +#define _BITS_TYPESIZES_H 1 + +/* See <bits/types.h> for the meaning of these macros. This file exists so + that <bits/types.h> need not vary across different GNU platforms. */ + +#define __DEV_T_TYPE __UQUAD_TYPE +#define __UID_T_TYPE __U32_TYPE +#define __GID_T_TYPE __U32_TYPE +#define __INO_T_TYPE __ULONGWORD_TYPE +#define __INO64_T_TYPE __UQUAD_TYPE +#define __MODE_T_TYPE __U32_TYPE +#define __NLINK_T_TYPE __UWORD_TYPE +#define __OFF_T_TYPE __SLONGWORD_TYPE +#define __OFF64_T_TYPE __SQUAD_TYPE +#define __PID_T_TYPE __S32_TYPE +#define __RLIM_T_TYPE __ULONGWORD_TYPE +#define __RLIM64_T_TYPE __UQUAD_TYPE +#define __BLKCNT_T_TYPE __SLONGWORD_TYPE +#define __BLKCNT64_T_TYPE __SQUAD_TYPE +#define __FSBLKCNT_T_TYPE __ULONGWORD_TYPE +#define __FSBLKCNT64_T_TYPE __UQUAD_TYPE +#define __FSFILCNT_T_TYPE __ULONGWORD_TYPE +#define __FSFILCNT64_T_TYPE __UQUAD_TYPE +#define __ID_T_TYPE __U32_TYPE +#define __CLOCK_T_TYPE __SLONGWORD_TYPE +#define __TIME_T_TYPE __SLONGWORD_TYPE +#define __USECONDS_T_TYPE __U32_TYPE +#define __SUSECONDS_T_TYPE __SLONGWORD_TYPE +#define __DADDR_T_TYPE __S32_TYPE +#define __SWBLK_T_TYPE __SLONGWORD_TYPE +#define __KEY_T_TYPE __S32_TYPE +#define __CLOCKID_T_TYPE __S32_TYPE +#define __TIMER_T_TYPE void * +#define __BLKSIZE_T_TYPE __SLONGWORD_TYPE +#define __FSID_T_TYPE struct { int __val[2]; } +#define __SSIZE_T_TYPE __SWORD_TYPE + +/* Number of descriptors that can fit in an `fd_set'. */ +#define __FD_SETSIZE 1024 + + +#endif /* bits/typesizes.h */ diff --git a/openembedded/packages/glibc/glibc-2.4/glibc-2.4-compile.patch b/openembedded/packages/glibc/glibc-2.4/glibc-2.4-compile.patch new file mode 100644 index 000000000..ea9f55ae7 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/glibc-2.4-compile.patch @@ -0,0 +1,29 @@ +--- glibc-2.4/csu/libc-start.c.ark 2006-03-13 03:07:15.000000000 +0100 ++++ glibc-2.4/csu/libc-start.c 2006-03-13 03:08:51.000000000 +0100 +@@ -59,6 +59,11 @@ + # define LIBC_START_MAIN BP_SYM (__libc_start_main) + #endif + ++#ifdef SHARED ++#include <pthread-functions.h> ++extern struct pthread_functions __libc_pthread_functions; ++#endif ++ + #ifdef MAIN_AUXVEC_ARG + /* main gets passed a pointer to the auxiliary. */ + # define MAIN_AUXVEC_DECL , void * +--- glibc-2.4/nscd/Makefile.ark 2006-03-13 14:05:47.000000000 +0100 ++++ glibc-2.4/nscd/Makefile 2006-03-13 14:06:12.000000000 +0100 +@@ -67,8 +67,10 @@ + # contains only the basic kernel interface headers, not something like + # libselinux. So the simplest thing is to presume that the standard + # system headers will be ok for this file. +-$(objpfx)nscd_stat.o: sysincludes = # nothing +-$(objpfx)selinux.o: sysincludes = # nothing ++# Except, of course, this breaks crosscompiling with kernel headers in ++# a nonstandard location... ++#$(objpfx)nscd_stat.o: sysincludes = # nothing ++#$(objpfx)selinux.o: sysincludes = # nothing + + distribute := nscd.h nscd-client.h dbg_log.h \ + $(addsuffix .c, $(filter-out xmalloc,$(all-nscd-modules))) \ diff --git a/openembedded/packages/glibc/glibc-2.4/ldsocache-varrun.patch b/openembedded/packages/glibc/glibc-2.4/ldsocache-varrun.patch new file mode 100644 index 000000000..9994d4f87 --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/ldsocache-varrun.patch @@ -0,0 +1,18 @@ +This patch moves ld.so.cache from /etc to /var/run. This is for devices +where /etc is JFFS2 or CRAMFS but /var is a ramdisk. + +# +# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher +# + +--- libc/sysdeps/generic/dl-cache.h~ldsocache-varrun ++++ libc/sysdeps/generic/dl-cache.h +@@ -29,7 +29,7 @@ + #endif + + #ifndef LD_SO_CACHE +-# define LD_SO_CACHE SYSCONFDIR "/ld.so.cache" ++# define LD_SO_CACHE "/var/run/ld.so.cache" + #endif + + #ifndef add_system_dir diff --git a/openembedded/packages/glibc/glibc-2.4/nptl-crosscompile.patch b/openembedded/packages/glibc/glibc-2.4/nptl-crosscompile.patch new file mode 100644 index 000000000..18a46ad4f --- /dev/null +++ b/openembedded/packages/glibc/glibc-2.4/nptl-crosscompile.patch @@ -0,0 +1,26 @@ +--- glibc-2.4/nptl/sysdeps/pthread/configure.in.ark 2006-03-12 00:41:40.000000000 +0100 ++++ glibc-2.4/nptl/sysdeps/pthread/configure.in 2006-03-12 00:44:08.000000000 +0100 +@@ -45,5 +45,6 @@ + AC_MSG_ERROR([the compiler must support C cleanup handling]) + fi + else +- AC_MSG_ERROR(forced unwind support is required) ++ AC_MSG_WARN([forced unwind support is required, can't be verified while crosscompiling]) ++ AC_DEFINE(HAVE_FORCED_UNWIND) + fi +--- glibc-2.4/nptl/sysdeps/pthread/configure.ark 2006-03-12 00:42:47.000000000 +0100 ++++ glibc-2.4/nptl/sysdeps/pthread/configure 2006-03-12 00:44:08.000000000 +0100 +@@ -153,7 +153,10 @@ + { (exit 1); exit 1; }; } + fi + else +- { { echo "$as_me:$LINENO: error: forced unwind support is required" >&5 +-echo "$as_me: error: forced unwind support is required" >&2;} +- { (exit 1); exit 1; }; } ++ { echo "$as_me:$LINENO: WARNING: forced unwind support is required, can't be verified while crosscompiling" >&5 ++echo "$as_me: WARNING: forced unwind support is required, can't be verified while crosscompiling" >&2;} ++ cat >>confdefs.h <<\_ACEOF ++#define HAVE_FORCED_UNWIND 1 ++_ACEOF ++ + fi diff --git a/openembedded/packages/glibc/glibc-initial_2.4.bb b/openembedded/packages/glibc/glibc-initial_2.4.bb new file mode 100644 index 000000000..422e8b711 --- /dev/null +++ b/openembedded/packages/glibc/glibc-initial_2.4.bb @@ -0,0 +1,46 @@ +SECTION = "libs" +include glibc_${PV}.bb + +DEPENDS = "linux-libc-headers" +PROVIDES = "virtual/${TARGET_PREFIX}libc-initial" +FILESPATH = "${@base_set_filespath([ '${FILE_DIRNAME}/glibc-cvs', '${FILE_DIRNAME}/glibc', '${FILE_DIRNAME}/files', '${FILE_DIRNAME}' ], d)}" + +PACKAGES = "" + +do_configure () { + sed -ie 's,{ (exit 1); exit 1; }; },{ (exit 0); }; },g' ${S}/configure + chmod +x ${S}/configure + CC="${BUILD_CC}" CPP="${BUILD_CPP}" LD="${BUILD_LD}" ${S}/configure --host=${TARGET_SYS} --build=${BUILD_SYS} \ + --without-cvs --disable-sanity-checks \ + --with-headers=${CROSS_DIR}/${TARGET_SYS}/include \ + --enable-hacker-mode + if grep -q GLIBC_2.3 ${S}/ChangeLog; then + # glibc-2.3.x passes cross options to $(CC) when generating errlist-compat.c, which fails without a real cross-compiler. + # Fortunately, we don't need errlist-compat.c, since we just need .h files, + # so work around this by creating a fake errlist-compat.c and satisfying its dependencies. + # Another workaround might be to tell configure to not use any cross options to $(CC). + # The real fix would be to get install-headers to not generate errlist-compat.c. + make sysdeps/gnu/errlist.c + mkdir -p stdio-common + touch stdio-common/errlist-compat.c + fi +} + +do_compile () { + : +} + +do_stage () { + oe_runmake cross-compiling=yes install_root=${CROSS_DIR}/${TARGET_SYS} prefix="" install-headers + + # Two headers -- stubs.h and features.h -- aren't installed by install-headers, + # so do them by hand. We can tolerate an empty stubs.h for the moment. + # See e.g. http://gcc.gnu.org/ml/gcc/2002-01/msg00900.html + mkdir -p ${CROSS_DIR}/${TARGET_SYS}/include/gnu + touch ${CROSS_DIR}/${TARGET_SYS}/include/gnu/stubs.h + cp ${S}/include/features.h ${CROSS_DIR}/${TARGET_SYS}/include/features.h +} + +do_install () { + : +} diff --git a/openembedded/packages/glibc/glibc-intermediate_2.4.bb b/openembedded/packages/glibc/glibc-intermediate_2.4.bb new file mode 100644 index 000000000..819cd0950 --- /dev/null +++ b/openembedded/packages/glibc/glibc-intermediate_2.4.bb @@ -0,0 +1,14 @@ +SECTION = "libs" +include glibc_${PV}.bb + +DEFAULT_PREFERENCE = "-1" + +do_install () { + : +} + +PACKAGES = "" +PROVIDES = "virtual/${TARGET_PREFIX}libc-for-gcc" +DEPENDS = "virtual/${TARGET_PREFIX}gcc-initial linux-libc-headers" +GLIBC_ADDONS = "nptl,ports" +GLIBC_EXTRA_OECONF = "" diff --git a/openembedded/packages/glibc/glibc_2.4.bb b/openembedded/packages/glibc/glibc_2.4.bb new file mode 100644 index 000000000..faaf27ced --- /dev/null +++ b/openembedded/packages/glibc/glibc_2.4.bb @@ -0,0 +1,201 @@ +DESCRIPTION = "GNU C Library" +HOMEPAGE = "http://www.gnu.org/software/libc/libc.html" +LICENSE = "LGPL" +SECTION = "libs" +PRIORITY = "required" +DEFAULT_PREFERENCE = "-1" +PR = "r4" + +FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/glibc-2.4" + +GLIBC_ADDONS ?= "ports,nptl,libidn" +GLIBC_EXTRA_OECONF ?= "" + +GLIBC_BROKEN_LOCALES = "sid_ET tr_TR mn_MN" + +# +# For now, we will skip building of a gcc package if it is a uclibc one +# and our build is not a uclibc one, and we skip a glibc one if our build +# is a uclibc build. +# +# See the note in gcc/gcc_3.4.0.oe +# + +python __anonymous () { + import bb, re + uc_os = (re.match('.*uclibc$', bb.data.getVar('TARGET_OS', d, 1)) != None) + if uc_os: + raise bb.parse.SkipPackage("incompatible with target %s" % + bb.data.getVar('TARGET_OS', d, 1)) +} + +# nptl needs unwind support in gcc, which can't be built without glibc. +PROVIDES = "virtual/libc ${@['virtual/${TARGET_PREFIX}libc-for-gcc', '']['nptl' in '${GLIBC_ADDONS}']}" +PROVIDES += "virtual/libintl virtual/libiconv" +DEPENDS = "${@['virtual/${TARGET_PREFIX}gcc-initial', 'virtual/${TARGET_PREFIX}gcc']['nptl' in '${GLIBC_ADDONS}']} linux-libc-headers" +RDEPENDS_${PN}-dev = "linux-libc-headers-dev" +INHIBIT_DEFAULT_DEPS = "1" + +# file://noinfo.patch;patch=1 +# file://ldconfig.patch;patch=1;pnum=0 +# file://arm-machine-gmon.patch;patch=1;pnum=0 \ +# \ +# file://arm-ioperm.patch;patch=1;pnum=0 \ +# file://ldd.patch;patch=1;pnum=0 \ +SRC_URI = "ftp://ftp.gnu.org/pub/gnu/glibc/glibc-2.4.tar.bz2 \ + ftp://ftp.gnu.org/pub/gnu/glibc/glibc-ports-2.4.tar.bz2 \ + ftp://ftp.gnu.org/pub/gnu/glibc/glibc-libidn-2.4.tar.bz2 \ + file://arm-memcpy.patch;patch=1 \ + file://arm-longlong.patch;patch=1 \ + file://fhs-linux-paths.patch;patch=1 \ + file://dl-cache-libcmp.patch;patch=1 \ + file://ldsocache-varrun.patch;patch=1 \ + file://nptl-crosscompile.patch;patch=1 \ + file://glibc-2.4-compile.patch;patch=1 \ + file://fixup-aeabi-syscalls.patch;patch=1 \ + file://generic-bits_select.h \ + file://generic-bits_types.h \ + file://generic-bits_typesizes.h \ + file://generic-bits_time.h \ + file://etc/ld.so.conf \ + file://generate-supported.mk" + +S = "${WORKDIR}/glibc-2.4" +B = "${WORKDIR}/build-${TARGET_SYS}" + +inherit autotools + +EXTRA_OECONF = "--enable-kernel=${OLDEST_KERNEL} \ + --without-cvs --disable-profile --disable-debug --without-gd \ + --enable-clocale=gnu \ + --enable-add-ons=${GLIBC_ADDONS} \ + --with-headers=${STAGING_INCDIR} \ + --without-selinux \ + ${GLIBC_EXTRA_OECONF}" + +EXTRA_OECONF += "${@get_glibc_fpu_setting(bb, d)}" + +def get_glibc_fpu_setting(bb, d): + if bb.data.getVar('TARGET_FPU', d, 1) in [ 'soft' ]: + return "--without-fp" + return "" + +do_munge() { + # Integrate ports and libidn into tree + mv ${WORKDIR}/glibc-ports-${PV} ${S}/ports + mv ${WORKDIR}/glibc-libidn-${PV} ${S}/libidn + + # Ports isn't really working... Fix it + # Some of this is rather dirty, but it seems to be the only + # quick way to get this cruft to compile + rm -rf ${S}/ports/sysdeps/unix/sysv/linux/arm/linuxthreads + ln -s nptl ${S}/ports/sysdeps/unix/sysv/linux/arm/linuxthreads + cp ${S}/sysdeps/unix/sysv/linux/i386/bits/wchar.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/ + cp ${S}/sysdeps/wordsize-32/bits/wordsize.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/ + cp ${WORKDIR}/generic-bits_select.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/select.h + cp ${WORKDIR}/generic-bits_types.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/types.h + cp ${WORKDIR}/generic-bits_typesizes.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/typesizes.h + cp ${WORKDIR}/generic-bits_time.h ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/time.h + # Copy in generic stuff for not yet implemented headers + for i in ${S}/bits/*.h; do + F=`basename $i` + [ "$F" = "local_lim.h" ] && continue + [ "$F" = "errno.h" ] && continue + test -e ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/$F || test -e ${S}/ports/sysdeps/arm/bits/$F || test -e ${S}/sysdeps/unix/sysv/linux/bits/$F || test -e ${S}/sysdeps/ieee754/bits/$F || cp $i ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/ + done + # This is harmful; we need to get the one from nptl/sysdeps/pthreads + rm -f ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/libc-lock.h + # Obsoleted by sysdeps/arm/{fpu,eabi}/bits/fenv.h + rm -f ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/fenv.h + # Obsoleted by sysdeps/gnu/bits/utmp.h + rm -f ${S}/ports/sysdeps/unix/sysv/linux/arm/bits/utmp.h + + # http://www.handhelds.org/hypermail/oe/51/5135.html + # Some files were moved around between directories on + # 2005-12-21, which means that any attempt to check out + # from CVS using a datestamp older than that will be doomed. + # + # This is a workaround for that problem. + rm -rf ${S}/bits +} + +addtask munge before do_patch after do_unpack + +do_configure () { +# override this function to avoid the autoconf/automake/aclocal/autoheader +# calls for now +# don't pass CPPFLAGS into configure, since it upsets the kernel-headers +# version check and doesn't really help with anything + if [ -z "`which rpcgen`" ]; then + echo "rpcgen not found. Install glibc-devel." + exit 1 + fi + (cd ${S} && gnu-configize) || die "failure in running gnu-configize" + CPPFLAGS="" oe_runconf +} + +rpcsvc = "bootparam_prot.x nlm_prot.x rstat.x \ + yppasswd.x klm_prot.x rex.x sm_inter.x mount.x \ + rusers.x spray.x nfs_prot.x rquota.x key_prot.x" + +do_compile () { + # -Wl,-rpath-link <staging>/lib in LDFLAGS can cause breakage if another glibc is in staging + unset LDFLAGS + base_do_compile + ( + cd ${S}/sunrpc/rpcsvc + for r in ${rpcsvc}; do + h=`echo $r|sed -e's,\.x$,.h,'` + rpcgen -h $r -o $h || oewarn "unable to generate header for $r" + done + ) +} + +do_stage() { + rm -f ${STAGING_LIBDIR}/libc.so.6 + oe_runmake 'install_root=${STAGING_DIR}/${HOST_SYS}' \ + 'includedir=/include' 'libdir=/lib' 'slibdir=/lib' \ + '${STAGING_LIBDIR}/libc.so.6' \ + install-headers install-lib + + install -d ${STAGING_INCDIR}/gnu \ + ${STAGING_INCDIR}/bits \ + ${STAGING_INCDIR}/rpcsvc + install -m 0644 ${S}/include/gnu/stubs.h ${STAGING_INCDIR}/gnu/ + install -m 0644 ${B}/bits/stdio_lim.h ${STAGING_INCDIR}/bits/ + install -m 0644 misc/syscall-list.h ${STAGING_INCDIR}/bits/syscall.h + for r in ${rpcsvc}; do + h=`echo $r|sed -e's,\.x$,.h,'` + install -m 0644 ${S}/sunrpc/rpcsvc/$h ${STAGING_INCDIR}/rpcsvc/ + done + for i in libc.a libc_pic.a libc_nonshared.a; do + install -m 0644 ${B}/$i ${STAGING_LIBDIR}/ || die "failed to install $i" + done + echo 'GROUP ( libpthread.so.0 libpthread_nonshared.a )' > ${STAGING_LIBDIR}/libpthread.so + echo 'GROUP ( libc.so.6 libc_nonshared.a )' > ${STAGING_LIBDIR}/libc.so + + rm -f ${CROSS_DIR}/${TARGET_SYS}/lib/libc.so.6 + oe_runmake 'install_root=${CROSS_DIR}/${TARGET_SYS}' \ + 'includedir=/include' 'libdir=/lib' 'slibdir=/lib' \ + '${CROSS_DIR}/${TARGET_SYS}/lib/libc.so.6' \ + install-headers install-lib + + install -d ${CROSS_DIR}/${TARGET_SYS}/include/gnu \ + ${CROSS_DIR}/${TARGET_SYS}/include/bits \ + ${CROSS_DIR}/${TARGET_SYS}/include/rpcsvc + install -m 0644 ${S}/include/gnu/stubs.h ${CROSS_DIR}/${TARGET_SYS}/include/gnu/ + install -m 0644 ${B}/bits/stdio_lim.h ${CROSS_DIR}/${TARGET_SYS}/include/bits/ + install -m 0644 misc/syscall-list.h ${CROSS_DIR}/${TARGET_SYS}/include/bits/syscall.h + for r in ${rpcsvc}; do + h=`echo $r|sed -e's,\.x$,.h,'` + install -m 0644 ${S}/sunrpc/rpcsvc/$h ${CROSS_DIR}/${TARGET_SYS}/include/rpcsvc/ + done + + for i in libc.a libc_pic.a libc_nonshared.a; do + install -m 0644 ${B}/$i ${CROSS_DIR}/${TARGET_SYS}/lib/ || die "failed to install $i" + done + echo 'GROUP ( libpthread.so.0 libpthread_nonshared.a )' > ${CROSS_DIR}/${TARGET_SYS}/lib/libpthread.so + echo 'GROUP ( libc.so.6 libc_nonshared.a )' > ${CROSS_DIR}/${TARGET_SYS}/lib/libc.so +} + +include glibc-package.bbclass diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/3477-1.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/3477-1.patch new file mode 100644 index 000000000..1b207b3cd --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/3477-1.patch @@ -0,0 +1,43 @@ +From: Nicolas Pitre <nico@cam.org> +Date: Sat, 15 Apr 2006 15:10:43 +0000 (+0100) +Subject: [ARM] 3477/1: ARM EABI: undefine removed syscalls +X-Git-Url: http://git.infradead.org/?p=mtd-2.6.git;a=commitdiff;h=463b158aab247b600e4e93614b7b8f42a66331c9 + +[ARM] 3477/1: ARM EABI: undefine removed syscalls + +Patch from Nicolas Pitre + +Avoid confusion for libraries assuming that a given syscall is available +when corresponding symbol is defined. + +Signed-off-by: Nicolas Pitre <nico@cam.org> +Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> +--- + +--- a/include/asm-arm/unistd.h ++++ b/include/asm-arm/unistd.h +@@ -360,6 +360,24 @@ + #define __ARM_NR_usr32 (__ARM_NR_BASE+4) + #define __ARM_NR_set_tls (__ARM_NR_BASE+5) + ++/* ++ * The following syscalls are obsolete and no longer available for EABI. ++ */ ++#if defined(__ARM_EABI__) ++#undef __NR_time ++#undef __NR_umount ++#undef __NR_stime ++#undef __NR_alarm ++#undef __NR_utime ++#undef __NR_getrlimit ++#undef __NR_select ++#undef __NR_readdir ++#undef __NR_mmap ++#undef __NR_socketcall ++#undef __NR_syscall ++#undef __NR_ipc ++#endif ++ + #define __sys2(x) #x + #define __sys1(x) __sys2(x) + diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/asm-arch-irqs.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/asm-arch-irqs.patch new file mode 100644 index 000000000..4785275db --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/asm-arch-irqs.patch @@ -0,0 +1,19 @@ +--- linux-libc-headers-2.6.15.99/include/asm-arm/arch-ebsa285/irqs.h.orig 2006-03-19 17:01:59.000000000 +0100 ++++ linux-libc-headers-2.6.15.99/include/asm-arm/arch-ebsa285/irqs.h 2006-03-19 17:02:50.000000000 +0100 +@@ -8,7 +8,6 @@ + * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder + * 01-Feb-1999 PJB ISA IRQs start at 0 not 16 + */ +-#include <asm/mach-types.h> + + #define NR_IRQS 36 + #define NR_DC21285_IRQS 16 +@@ -92,7 +91,7 @@ + #undef RTC_IRQ + #define RTC_IRQ IRQ_ISA_RTC_ALARM + #define I8042_KBD_IRQ IRQ_ISA_KEYBOARD +-#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) ++#define I8042_AUX_IRQ IRQ_ISA_PS2MOUSE + #define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY + + #define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i) diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netdevice.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netdevice.patch new file mode 100644 index 000000000..588aea4ba --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netdevice.patch @@ -0,0 +1,11 @@ +--- linux-libc-headers-2.6.15.99/include/linux/netdevice.h.orig 2006-04-29 14:10:39.245687500 +0200 ++++ linux-libc-headers-2.6.15.99/include/linux/netdevice.h 2006-04-29 14:11:08.819535750 +0200 +@@ -100,8 +100,6 @@ + unsigned long tx_compressed; + }; + +-extern int __init netdev_boot_setup(char *str); +- + /* Media selection options. */ + enum { + IF_PORT_UNKNOWN = 0, diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netfilter_ipv4.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netfilter_ipv4.patch new file mode 100644 index 000000000..f7f77af0d --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-netfilter_ipv4.patch @@ -0,0 +1,31 @@ +iptables 1.3.3 assumes that ipt_scpt.h defines ELEMCOUNT, but ipt_scpt.h +moved to ARRAY_SIZE (which would be defined in linux/kernel.h). +The ip_conntrack_dir definition now resides in linux/netfilter/ip_conntrack_common.h + +--- linux-libc-headers-2.6.15.99/include/linux/netfilter_ipv4/ipt_sctp.h.orig 2006-03-20 22:03:04.000000000 +0100 ++++ linux-libc-headers-2.6.15.99/include/linux/netfilter_ipv4/ipt_sctp.h 2006-03-20 22:07:09.000000000 +0100 +@@ -7,6 +7,8 @@ + + #define IPT_SCTP_VALID_FLAGS 0x07 + ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++#define ELEMCOUNT(x) (sizeof(x) / sizeof((x)[0])) + + struct ipt_sctp_flag_info { + u_int8_t chunktype; +--- linux-libc-headers-2.6.15.99/include/linux/netfilter_ipv4/ip_conntrack_tuple.h.orig 2006-03-20 21:51:10.000000000 +0100 ++++ linux-libc-headers-2.6.15.99/include/linux/netfilter_ipv4/ip_conntrack_tuple.h 2006-03-20 21:51:12.000000000 +0100 +@@ -89,13 +89,6 @@ + (tuple)->dst.u.all = 0; \ + } while (0) + +-enum ip_conntrack_dir +-{ +- IP_CT_DIR_ORIGINAL, +- IP_CT_DIR_REPLY, +- IP_CT_DIR_MAX +-}; +- + static inline int ip_ct_tuple_src_equal(const struct ip_conntrack_tuple *t1, + const struct ip_conntrack_tuple *t2) + { diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-rtc.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-rtc.patch new file mode 100644 index 000000000..36b80fb9d --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-rtc.patch @@ -0,0 +1,11 @@ +--- linux-libc-headers-2.6.15.99/include/linux/rtc.h.orig 2006-03-19 12:31:07.000000000 +0100 ++++ linux-libc-headers-2.6.15.99/include/linux/rtc.h 2006-03-19 12:31:14.000000000 +0100 +@@ -11,8 +11,6 @@ + #ifndef _LINUX_RTC_H_ + #define _LINUX_RTC_H_ + +-#include <linux/interrupt.h> +- + /* + * The struct used to pass data via the following ioctl. Similar to the + * struct tm in <time.h>, but it needs to be here so that the kernel diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-videodev2.patch b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-videodev2.patch new file mode 100644 index 000000000..95335c99b --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers-2.6.15.99/linux-videodev2.patch @@ -0,0 +1,45 @@ +--- linux-libc-headers-2.6.15.99/include/linux/videodev2.h.orig 2006-03-20 11:14:35.000000000 +0100 ++++ linux-libc-headers-2.6.15.99/include/linux/videodev2.h 2006-03-20 11:14:37.000000000 +0100 +@@ -15,7 +15,32 @@ + */ + #include <sys/time.h> /* need struct timeval */ + #include <asm/types.h> /* needed __u64 */ +- ++ ++#define OBSOLETE_OWNER 1 /* It will be removed for 2.6.15 */ ++#define HAVE_V4L2 1 ++ ++/* ++ * Common stuff for both V4L1 and V4L2 ++ * Moved from videodev.h ++ */ ++ ++#define VIDEO_MAX_FRAME 32 ++ ++#define VID_TYPE_CAPTURE 1 /* Can capture */ ++#define VID_TYPE_TUNER 2 /* Can tune */ ++#define VID_TYPE_TELETEXT 4 /* Does teletext */ ++#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ ++#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ ++#define VID_TYPE_CLIPPING 32 /* Can clip */ ++#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ ++#define VID_TYPE_SCALES 128 /* Scalable */ ++#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ ++#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ ++#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ ++#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ ++#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ ++#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ ++ + /* + * M I S C E L L A N E O U S + */ +@@ -464,7 +489,7 @@ + struct v4l2_clip + { + struct v4l2_rect c; +- struct v4l2_clip __user *next; ++ struct v4l2_clip *next; + }; + + struct v4l2_window diff --git a/openembedded/packages/linux-libc-headers/linux-libc-headers_2.6.15.99.bb b/openembedded/packages/linux-libc-headers/linux-libc-headers_2.6.15.99.bb new file mode 100644 index 000000000..28926f026 --- /dev/null +++ b/openembedded/packages/linux-libc-headers/linux-libc-headers_2.6.15.99.bb @@ -0,0 +1,80 @@ +SECTION = "devel" +DESCRIPTION = "Sanitized set of 2.6 kernel headers for the C library's use." +# This package is derived from the original linux-libc-headers at +# http://ep09.pld-linux.org/~mmazur/linux-libc-headers/ +# More specifically, llh-2.6.12.0 was patched up to 2.6.16-rc6 with +# the official linux patches (where applicable) and then fixed up just +# enough to build glibc-2.4. BEWARE! +# +# license note from the linux-libc-headers package: +# Linux-libc-headers are derived from linux kernel headers. For license of a +# particular header, check it's content, and if copyright notice isn't present, +# standard linux kernel license applies. +# since we assume GPL for linux i think we can also assume it here +LICENSE = "GPL" +DEFAULT_PREFERENCE = "-1" +INHIBIT_DEFAULT_DEPS = "1" +PR = "r4" + +SRC_URI = "http://ewi546.ewi.utwente.nl/OE/eabi/linux-libc-headers-${PV}.tar.bz2 \ + file://keyboard.patch;patch=1 \ + file://asm-arch-irqs.patch;patch=1 \ + file://linux-netdevice.patch;patch=1 \ + file://linux-netfilter_ipv4.patch;patch=1 \ + file://linux-rtc.patch;patch=1 \ + file://linux-videodev2.patch;patch=1 \ + file://3477-1.patch;patch=1" + +S = "${WORKDIR}/linux-libc-headers-${PV}" + +do_configure () { + case ${TARGET_ARCH} in + alpha*) ARCH=alpha ;; + arm*) ARCH=arm ;; + cris*) ARCH=cris ;; + hppa*) ARCH=parisc ;; + i*86*) ARCH=i386 ;; + ia64*) ARCH=ia64 ;; + mips*) ARCH=mips ;; + m68k*) ARCH=m68k ;; + powerpc*) ARCH=ppc ;; + s390*) ARCH=s390 ;; + sh*) ARCH=sh ;; + sparc64*) ARCH=sparc64 ;; + sparc*) ARCH=sparc ;; + x86_64*) ARCH=x86_64 ;; + esac + if test ! -e include/asm-$ARCH; then + oefatal unable to create asm symlink in kernel headers + fi + rm "include/asm" + cp -pPR "include/asm-$ARCH" "include/asm" + if test "$ARCH" = "arm"; then + cp -pPR include/asm/arch-ebsa285 include/asm/arch + elif test "$ARCH" = "sh"; then + cp -pPR include/asm/cpu-${TARGET_ARCH} include/asm/cpu || die "unable to create include/asm/cpu" + fi +} + +do_stage () { + install -d ${STAGING_INCDIR} + rm -rf ${STAGING_INCDIR}/linux ${STAGING_INCDIR}/asm ${STAGING_INCDIR}/asm-generic + cp -pfLR include/linux ${STAGING_INCDIR}/ + cp -pfLR include/asm ${STAGING_INCDIR}/ + cp -pfLR include/asm-generic ${STAGING_INCDIR}/ + rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/linux + rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/asm + rm -rf ${CROSS_DIR}/${TARGET_SYS}/include/asm-generic + install -d ${CROSS_DIR}/${TARGET_SYS}/include + cp -pfLR include/linux ${CROSS_DIR}/${TARGET_SYS}/include/ + cp -pfLR include/asm ${CROSS_DIR}/${TARGET_SYS}/include/ + cp -pfLR include/asm-generic ${CROSS_DIR}/${TARGET_SYS}/include/ +} + +do_install() { + install -d ${D}${includedir} + cp -pfLR include/linux ${D}${includedir}/ + cp -pfLR include/asm ${D}${includedir}/ + cp -pfLR include/asm-generic ${D}${includedir}/ +} + |