o Initial import.

4 files changed, 614 insertions, 0 deletions

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..03e0b0f
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,14 @@
+BOARD_TAG		  = leonardo
+#BOARD_TAG		   = blendmicro16
+#DEVICE_PORT	   = /dev/ttyACM0
+MONITOR_BAUDRATE  = 115200
+MONITOR_PORT	 ?= /dev/ttyACM0
+
+ARDUINO_LIBS = BLE SPI
+
+ARDMK_DIR ?= /usr/share/arduino
+include $(ARDMK_DIR)/Arduino.mk
+
+#/usr/share/arduino/hardware/tools/avr/bin/avr-g++ -x c++ -include Arduino.h -MMD -c -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=105 -D__PROG_TYPES_COMPAT__ -I. -I/usr/share/arduino/hardware/arduino/cores/arduino -I/usr/share/arduino/hardware/arduino/variants/leonardo -I/usr/share/arduino/libraries/SPI -I/home/trygvis/sketchbook/libraries/BLE -Wall -ffunction-sections -fdata-sections -Os -DUSB_VID=0x2341 -DUSB_PID=0x8036 -fno-exceptions   bitraf_door.ino -o build-leonardo/bitraf_door.o
+
+#/home/trygvis/opt/arduino-1.0.5/hardware/tools/avr/bin/avr-g++ -c -g -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections -mmcu=atmega32u4 -DF_CPU=8000000L -MMD -DUSB_VID=0x03EB -DUSB_PID=0x2404 -DARDUINO=105 -I/home/trygvis/opt/arduino-1.0.5/hardware/arduino/cores/arduino -I/home/trygvis/sketchbook/hardware/blend/variants/BlendMicro-8MHz -I/home/trygvis/opt/arduino-1.0.5/libraries/SPI -I/home/trygvis/sketchbook/libraries/BLE /tmp/build8653612679895592527.tmp/bitraf_door.cpp -o /tmp/build8653612679895592527.tmp/bitraf_door.cpp.o 
diff --git a/fiken_status_panel.ino b/fiken_status_panel.ino
new file mode 100644
index 0000000..6283201
--- /dev/null
+++ b/fiken_status_panel.ino
@@ -0,0 +1,330 @@
+#include <SPI.h>
+#include <lib_aci.h>
+#include <aci_setup.h>
+
+#include "services.h"
+
+static services_pipe_type_mapping_t services_pipe_type_mapping[NUMBER_OF_PIPES] = SERVICES_PIPE_TYPE_MAPPING_CONTENT;
+static hal_aci_data_t setup_msgs[NB_SETUP_MESSAGES] PROGMEM = SETUP_MESSAGES_CONTENT;
+
+static struct aci_state_t aci_state;
+static hal_aci_evt_t aci_data;
+static bool timing_change_done  = false;
+
+void __ble_assert(const char *file, uint16_t line)
+{
+  Serial.print("ERROR ");
+  Serial.print(file);
+  Serial.print(": ");
+  Serial.print(line);
+  Serial.print("\n");
+  while(1);
+}
+
+void setup() {
+#if defined(BLEND_MICRO_8MHZ)
+  // As the F_CPU = 8000000UL, the USB core make the PLLCSR = 0x02
+  // But the external xtal is 16000000Hz, so correct it here.
+  PLLCSR |= 0x10;             // Need 16 MHz xtal
+  while (!(PLLCSR & (1<<PLOCK)));     // wait for lock pll
+#elif defined(BLEND_MICRO_16MHZ)
+  // The CPU clock in bootloader is 8MHz, change to 16MHz for sketches to run (i.e. overclock running at 3.3v).
+  CLKPR = 0x80;
+  CLKPR = 0;
+#endif
+
+  Serial.begin((unsigned int)115200);
+
+  //Wait until the serial port is available (useful only for the Leonardo)
+  //As the Leonardo board is not reseted every time you open the Serial Monitor
+  #if defined (__AVR_ATmega32U4__)
+  while(!Serial) {}
+  #elif defined(__PIC32MX__)
+  delay(1000);
+  #endif
+
+  Serial.println(F("setup()"));
+
+  // Point ACI data structures to the the setup data that the nRFgo studio generated for the nRF8001
+  if (NULL != services_pipe_type_mapping) {
+    aci_state.aci_setup_info.services_pipe_type_mapping = &services_pipe_type_mapping[0];
+  }
+  else {
+    aci_state.aci_setup_info.services_pipe_type_mapping = NULL;
+  }
+  aci_state.aci_setup_info.number_of_pipes    = NUMBER_OF_PIPES;
+  aci_state.aci_setup_info.setup_msgs         = (hal_aci_data_t*)setup_msgs;
+  aci_state.aci_setup_info.num_setup_msgs     = NB_SETUP_MESSAGES;
+
+  /*
+  Tell the ACI library, the MCU to nRF8001 pin connections.
+  The Active pin is optional and can be marked UNUSED
+  */
+  aci_state.aci_pins.board_name = REDBEARLAB_SHIELD_V2;
+  aci_state.aci_pins.reqn_pin   = 6;
+  aci_state.aci_pins.rdyn_pin   = 7;
+  aci_state.aci_pins.mosi_pin   = MOSI;
+  aci_state.aci_pins.miso_pin   = MISO;
+  aci_state.aci_pins.sck_pin    = SCK;
+
+  aci_state.aci_pins.spi_clock_divider      = SPI_CLOCK_DIV8;//SPI_CLOCK_DIV8  = 2MHz SPI speed
+                                                             //SPI_CLOCK_DIV16 = 1MHz SPI speed
+  
+  aci_state.aci_pins.reset_pin              = UNUSED; //4 for Nordic board, UNUSED for REDBEARLAB_SHIELD_V1_1
+  aci_state.aci_pins.active_pin             = UNUSED;
+  aci_state.aci_pins.optional_chip_sel_pin  = UNUSED;
+
+  aci_state.aci_pins.interface_is_interrupt = false; //Interrupts still not available in Chipkit
+  aci_state.aci_pins.interrupt_number       = 4;
+
+  //We reset the nRF8001 here by toggling the RESET line connected to the nRF8001
+  //If the RESET line is not available we call the ACI Radio Reset to soft reset the nRF8001
+  //then we initialize the data structures required to setup the nRF8001
+  //The second parameter is for turning debug printing on for the ACI Commands and Events so they be printed on the Serial
+  lib_aci_init(&aci_state, false);
+  Serial.println(F("lib_aci_init done"));
+}
+
+static bool setup_required = false;
+
+static void aci_loop() {
+  // We enter the if statement only when there is a ACI event available to be processed
+  if (lib_aci_event_get(&aci_state, &aci_data)) {
+    aci_evt_t * aci_evt;
+    aci_evt = &aci_data.evt;
+
+    switch(aci_evt->evt_opcode) {
+      /**
+      As soon as you reset the nRF8001 you will get an ACI Device Started Event
+      */
+      case ACI_EVT_DEVICE_STARTED:
+        Serial.println(F("ACI_EVT_DEVICE_STARTED"));
+        aci_state.data_credit_total = aci_evt->params.device_started.credit_available;
+        switch(aci_evt->params.device_started.device_mode) {
+          case ACI_DEVICE_SETUP:
+            Serial.println(F("ACI_DEVICE_SETUP"));
+            setup_required = true;
+            break;
+
+          case ACI_DEVICE_STANDBY:
+            Serial.println(F("ACI_DEVICE_STANDBY"));
+            //Looking for an iPhone by sending radio advertisements
+            //When an iPhone connects to us we will get an ACI_EVT_CONNECTED event from the nRF8001
+            if (aci_evt->params.device_started.hw_error) {
+              delay(20); //Magic number used to make sure the HW error event is handled correctly.
+            }
+            else {
+              lib_aci_connect(180/* in seconds */, 0x0050 /* advertising interval 50ms*/);
+              Serial.println(F("Advertising started"));
+            }
+            break;
+          case ACI_DEVICE_INVALID:
+          case ACI_DEVICE_TEST:
+          case ACI_DEVICE_SLEEP:
+            // ignored
+            break;
+        }
+        break;
+
+      case ACI_EVT_CMD_RSP:
+//        Serial.println(F("ACI_EVT_CMD_RSP"));
+//        Serial.print(F("aci_evt->params.cmd_rsp.cmd_opcode="));
+//        Serial.println(aci_evt->params.cmd_rsp.cmd_opcode, HEX);
+//        Serial.print(F("aci_evt->params.cmd_rsp.cmd_status="));
+//        Serial.println(aci_evt->params.cmd_rsp.cmd_status, HEX);
+
+        //If an ACI command response event comes with an error -> stop
+        if (aci_evt->params.cmd_rsp.cmd_status != ACI_STATUS_SUCCESS) {
+          //ACI ReadDynamicData and ACI WriteDynamicData will have status codes of
+          //TRANSACTION_CONTINUE and TRANSACTION_COMPLETE
+          //all other ACI commands will have status code of ACI_STATUS_SCUCCESS for a successful command//
+//          Serial.print(F("ACI Command "));
+//          Serial.println(aci_evt->params.cmd_rsp.cmd_opcode, HEX);
+//          Serial.print(F("Evt Cmd respone: Status "));
+//          Serial.println(aci_evt->params.cmd_rsp.cmd_status, HEX);
+        }
+        if (aci_evt->params.cmd_rsp.cmd_opcode == ACI_CMD_GET_DEVICE_VERSION) {
+          //Store the version and configuration information of the nRF8001 in the Hardware Revision String Characteristic
+//          lib_aci_set_local_data(&aci_state, PIPE_DEVICE_INFORMATION_HARDWARE_REVISION_STRING_SET,
+//            (uint8_t *)&(aci_evt->params.cmd_rsp.params.get_device_version),
+//            sizeof(aci_evt_cmd_rsp_params_get_device_version_t));
+        }
+        break;
+
+      case ACI_EVT_CONNECTED:
+        Serial.println(F("ACI_EVT_CONNECTED"));
+//        uart_over_ble_init();
+        timing_change_done              = false;
+        aci_state.data_credit_available = aci_state.data_credit_total;
+
+        // Get the device version of the nRF8001 and store it in the Hardware Revision String
+        lib_aci_device_version();
+        break;
+
+      case ACI_EVT_PIPE_STATUS:
+        Serial.println(F("ACI_EVT_PIPE_STATUS"));
+        /*
+        if (lib_aci_is_pipe_available(&aci_state, PIPE_UART_OVER_BTLE_UART_TX_TX) && (false == timing_change_done))
+        {
+          lib_aci_change_timing_GAP_PPCP(); // change the timing on the link as specified in the nRFgo studio -> nRF8001 conf. -> GAP.
+                                            // Used to increase or decrease bandwidth
+          timing_change_done = true;
+        }
+        */
+        break;
+
+      case ACI_EVT_TIMING:
+        Serial.println(F("ACI_EVT_TIMING"));
+//        lib_aci_set_local_data(&aci_state,
+//                                PIPE_UART_OVER_BTLE_UART_LINK_TIMING_CURRENT_SET,
+//                                (uint8_t *)&(aci_evt->params.timing.conn_rf_interval), /* Byte aligned */
+//                                PIPE_UART_OVER_BTLE_UART_LINK_TIMING_CURRENT_SET_MAX_SIZE);
+        break;
+
+      case ACI_EVT_DISCONNECTED:
+        Serial.println(F("ACI_EVT_DISCONNECTED"));
+        lib_aci_connect(180/* in seconds */, 0x0100 /* advertising interval 100ms*/);
+        Serial.println(F("Advertising started"));
+        break;
+
+      case ACI_EVT_DATA_RECEIVED:
+        Serial.print(F("ACI_EVT_DATA_RECEIVED: pipe_number="));
+        Serial.println(aci_evt->params.data_received.rx_data.pipe_number, DEC);
+        if (aci_evt->params.data_received.rx_data.pipe_number == PIPE_FIKEN_STATUS_PANEL_GAUGE_RX_ACK) {
+          if (aci_evt->len != PIPE_FIKEN_STATUS_PANEL_GAUGE_RX_ACK_MAX_SIZE) {
+            break;
+          }
+          set_gauge_req(aci_evt->params.data_received.rx_data.aci_data);
+          lib_aci_send_ack(&aci_state, PIPE_FIKEN_STATUS_PANEL_GAUGE_RX_ACK);
+        }
+        /*
+        if (PIPE_UART_OVER_BTLE_UART_RX_RX == aci_evt->params.data_received.rx_data.pipe_number)
+        {
+          Serial.print(F(" Data(Hex) : "));
+          for(int i=0; i<aci_evt->len - 2; i++)
+          {
+            Serial.print((char)aci_evt->params.data_received.rx_data.aci_data[i]);
+            uart_buffer[i] = aci_evt->params.data_received.rx_data.aci_data[i];
+            Serial.print(F(" "));
+          }
+
+          uart_buffer_len = aci_evt->len - 2;
+          Serial.println(F(""));
+          if (lib_aci_is_pipe_available(&aci_state, PIPE_UART_OVER_BTLE_UART_TX_TX))
+          {
+          }
+        }
+        if (PIPE_UART_OVER_BTLE_UART_CONTROL_POINT_RX == aci_evt->params.data_received.rx_data.pipe_number)
+        {
+            uart_process_control_point_rx(&aci_evt->params.data_received.rx_data.aci_data[0], aci_evt->len - 2); //Subtract for Opcode and Pipe number
+        }
+        */
+        break;
+
+      case ACI_EVT_DATA_CREDIT:
+        Serial.println(F("ACI_EVT_DATA_CREDIT"));
+        aci_state.data_credit_available = aci_state.data_credit_available + aci_evt->params.data_credit.credit;
+        break;
+
+      case ACI_EVT_PIPE_ERROR:
+        Serial.println(F("ACI_EVT_PIPE_ERROR"));
+        //See the appendix in the nRF8001 Product Specication for details on the error codes
+        Serial.print(F("ACI Evt Pipe Error: Pipe #:"));
+        Serial.print(aci_evt->params.pipe_error.pipe_number, DEC);
+        Serial.print(F("  Pipe Error Code: 0x"));
+        Serial.println(aci_evt->params.pipe_error.error_code, HEX);
+
+        //Increment the credit available as the data packet was not sent.
+        //The pipe error also represents the Attribute protocol Error Response sent from the peer and that should not be counted
+        //for the credit.
+        if (ACI_STATUS_ERROR_PEER_ATT_ERROR != aci_evt->params.pipe_error.error_code)
+        {
+          aci_state.data_credit_available++;
+        }
+        break;
+
+      case ACI_EVT_HW_ERROR:
+        Serial.println(F("ACI_EVT_HW_ERROR"));
+        Serial.print(F("HW error: "));
+        Serial.println(aci_evt->params.hw_error.line_num, DEC);
+
+        for(uint8_t counter = 0; counter <= (aci_evt->len - 3); counter++)
+        {
+          Serial.write(aci_evt->params.hw_error.file_name[counter]); //uint8_t file_name[20];
+        }
+        Serial.println();
+        lib_aci_connect(180/* in seconds */, 0x0050 /* advertising interval 50ms*/);
+        Serial.println(F("Advertising started"));
+        break;
+
+      case ACI_EVT_INVALID:
+        Serial.println(F("ACI_EVT_INVALID"));
+        break;
+      case ACI_EVT_ECHO:
+        Serial.println(F("ACI_EVT_ECHO"));
+        break;
+      case ACI_EVT_BOND_STATUS:
+        Serial.println(F("ACI_EVT_BOND_STATUS"));
+        break;
+      case ACI_EVT_DATA_ACK:
+        Serial.println(F("ACI_EVT_DATA_ACK"));
+        break;
+      case ACI_EVT_DISPLAY_PASSKEY:
+        Serial.println(F("ACI_EVT_DISPLAY_PASSKEY"));
+        break;
+      case ACI_EVT_KEY_REQUEST:
+        Serial.println(F("ACI_EVT_KEY_REQUEST"));
+        break;
+    }
+  }
+  else {
+//    Serial.println(F("No ACI Events available"));
+    // No event in the ACI Event queue and if there is no event in the ACI command queue the arduino can go to sleep
+    // Arduino can go to sleep now
+    // Wakeup from sleep from the RDYN line
+  }
+
+  /* setup_required is set to true when the device starts up and enters setup mode.
+   * It indicates that do_aci_setup() should be called. The flag should be cleared if
+   * do_aci_setup() returns ACI_STATUS_TRANSACTION_COMPLETE.
+   */
+  if (setup_required) {
+    int ret = do_aci_setup(&aci_state);
+//    Serial.print(F("ret="));
+//    Serial.println(ret, DEC);
+    if (SETUP_SUCCESS == ret) {
+      setup_required = false;
+    }
+  }
+}
+
+void set_gauge_req(uint8_t *data) {
+    Serial.print(F("set_gauge_req, channel="));
+    Serial.print(data[0], DEC);
+    Serial.print(F(", value="));
+    Serial.println(data[1], DEC);
+}
+
+static uint8_t value = 0;
+void loop() {
+  static unsigned long last = 0, now;
+
+  //Process any ACI commands or events
+  aci_loop();
+
+  if (Serial.available()) {
+    Serial.write(Serial.read());
+  }
+
+  if (!setup_required) {
+    now = millis();
+    if (now - last > 3000) {
+      value++;
+      lib_aci_set_local_data(&aci_state, PIPE_FIKEN_STATUS_PANEL_GAUGE_SET, &value, 1);
+      last = now;
+      Serial.print(F("value="));
+      Serial.println(value, DEC);
+    }
+  }
+}
+
diff --git a/fiken_status_panel.xml b/fiken_status_panel.xml
new file mode 100644
index 0000000..d86c69f
--- /dev/null
+++ b/fiken_status_panel.xml
@@ -0,0 +1,116 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE AttributeServer>
+<Profile Version="1.3">
+    <SetupId>1</SetupId>
+    <Device>nRF8001_Dx</Device>
+    <Service Type="local" PrimaryService="true">
+        <Name>Fiken Status Panel</Name>
+        <Uuid BaseUUID="32D00000035D59C570D3BC8E4A1FD83F" BaseUUIDName="trygvis.io">0001</Uuid>
+        <Characteristic>
+            <Name>Gauge</Name>
+            <Uuid BaseUUID="32D00000035D59C570D3BC8E4A1FD83F" BaseUUIDName="trygvis.io">0002</Uuid>
+            <DefaultValue>1234</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>2</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>true</Write>
+                <Notify>false</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>false</Broadcast>
+            </Properties>
+            <SetPipe>true</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="4" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+        <Characteristic>
+            <Name>Led</Name>
+            <Uuid BaseUUID="32D00000035D59C570D3BC8E4A1FD83F" BaseUUIDName="trygvis.io">0003</Uuid>
+            <DefaultValue>0</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>3</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>true</Write>
+                <Notify>false</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>false</Broadcast>
+            </Properties>
+            <SetPipe>false</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="4" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+    </Service>
+    <Gapsettings>
+        <Name>Fiken Display</Name>
+        <DeviceNameWriteLength>13</DeviceNameWriteLength>
+        <LocalPipeOnDeviceName>true</LocalPipeOnDeviceName>
+        <DeviceNameShortLength>0</DeviceNameShortLength>
+        <Apperance>0000</Apperance>
+        <SecurityLevel>0</SecurityLevel>
+        <AuthenticationReq>0</AuthenticationReq>
+        <IoCapabilities>0</IoCapabilities>
+        <BondTimeout>600</BondTimeout>
+        <SecurityRequestDelay>10</SecurityRequestDelay>
+        <MinimumKeySize>7</MinimumKeySize>
+        <MaximumKeySize>16</MaximumKeySize>
+        <AdvertisingDataBondedBitmap>0</AdvertisingDataBondedBitmap>
+        <AdvertisingDataGeneralBitmap>5a</AdvertisingDataGeneralBitmap>
+        <AdvertisingDataBrodcastBitmap>40</AdvertisingDataBrodcastBitmap>
+        <AdvertisingDataBondedScanResponseBitmap>0</AdvertisingDataBondedScanResponseBitmap>
+        <AdvertisingDataGeneralScanResponseBitmap>5a</AdvertisingDataGeneralScanResponseBitmap>
+        <AdvertisingDataBrodcastScanResponseBitmap>0</AdvertisingDataBrodcastScanResponseBitmap>
+        <AdvertisingDataBondedBitmapCustom>0</AdvertisingDataBondedBitmapCustom>
+        <AdvertisingDataGeneralBitmapCustom>0</AdvertisingDataGeneralBitmapCustom>
+        <AdvertisingDataBrodcastBitmapCustom>0</AdvertisingDataBrodcastBitmapCustom>
+        <AdvertisingDataBondedScanResponseBitmapCustom>0</AdvertisingDataBondedScanResponseBitmapCustom>
+        <AdvertisingDataGeneralScanResponseBitmapCustom>0</AdvertisingDataGeneralScanResponseBitmapCustom>
+        <AdvertisingDataBrodcastScanResponseBitmapCustom>0</AdvertisingDataBrodcastScanResponseBitmapCustom>
+        <TxPowerLevelOffset>0</TxPowerLevelOffset>
+        <MinimumConnectionInterval>65535</MinimumConnectionInterval>
+        <MaximumConnectionInterval>65535</MaximumConnectionInterval>
+        <SlaveLatency>0</SlaveLatency>
+        <TimeoutMultipler>65535</TimeoutMultipler>
+        <AddServiceUpdateCharacteristic>false</AddServiceUpdateCharacteristic>
+        <AddServiceUpdateCharacteristicPipe>false</AddServiceUpdateCharacteristicPipe>
+        <TimingChangeDelay>5</TimingChangeDelay>
+        <CustomAdTypes>
+            <AdType index="1">
+                <Type>19</Type>
+                <Value>0000</Value>
+            </AdType>
+            <AdType index="2">
+                <Type>18</Type>
+                <Value></Value>
+            </AdType>
+        </CustomAdTypes>
+    </Gapsettings>
+    <Hardwaresettings>
+        <Clocksource>0</Clocksource>
+        <ClockAccuracy>1</ClockAccuracy>
+        <InitialTxPower>3</InitialTxPower>
+        <HfClkSource>0</HfClkSource>
+        <DcDcConverter>0</DcDcConverter>
+        <ActiveSignalModeIndex>0</ActiveSignalModeIndex>
+        <ActiveSignalToTickDistance>0</ActiveSignalToTickDistance>
+        <DynamicWindowLimitingEnabled>false</DynamicWindowLimitingEnabled>
+    </Hardwaresettings>
+    <CurrentInput>
+        <BatteryCharge>220</BatteryCharge>
+        <Master32KhzClockAccuracy>10</Master32KhzClockAccuracy>
+        <ConnectionInterval>1000</ConnectionInterval>
+        <PercentOfTimeSleeping>70.12</PercentOfTimeSleeping>
+        <PercentOfTimeAdvertising>6.94</PercentOfTimeAdvertising>
+        <AdvertisingInterval>1280</AdvertisingInterval>
+    </CurrentInput>
+</Profile>
diff --git a/services.h b/services.h
new file mode 100644
index 0000000..fad505a
--- /dev/null
+++ b/services.h
@@ -0,0 +1,154 @@
+/**
+* This file is autogenerated by nRFgo Studio 1.17.1.3252
+*/
+
+#ifndef SETUP_MESSAGES_H__
+#define SETUP_MESSAGES_H__
+
+#include "hal_platform.h"
+#include "aci.h"
+
+
+#define SETUP_ID 1
+#define SETUP_FORMAT 3 /** nRF8001 D */
+#define ACI_DYNAMIC_DATA_SIZE 133
+
+/* Service: Gap - Characteristic: Device name - Pipe: SET */
+#define PIPE_GAP_DEVICE_NAME_SET          1
+#define PIPE_GAP_DEVICE_NAME_SET_MAX_SIZE 13
+
+/* Service: Fiken Status Panel - Characteristic: Gauge - Pipe: RX_ACK */
+#define PIPE_FIKEN_STATUS_PANEL_GAUGE_RX_ACK          2
+#define PIPE_FIKEN_STATUS_PANEL_GAUGE_RX_ACK_MAX_SIZE 2
+
+/* Service: Fiken Status Panel - Characteristic: Gauge - Pipe: SET */
+#define PIPE_FIKEN_STATUS_PANEL_GAUGE_SET          3
+#define PIPE_FIKEN_STATUS_PANEL_GAUGE_SET_MAX_SIZE 2
+
+/* Service: Fiken Status Panel - Characteristic: Led - Pipe: RX_ACK */
+#define PIPE_FIKEN_STATUS_PANEL_LED_RX_ACK          4
+#define PIPE_FIKEN_STATUS_PANEL_LED_RX_ACK_MAX_SIZE 3
+
+
+#define NUMBER_OF_PIPES 4
+
+#define SERVICES_PIPE_TYPE_MAPPING_CONTENT {\
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_RX_ACK},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_RX_ACK},   \
+}
+
+#define GAP_PPCP_MAX_CONN_INT 0xffff /**< Maximum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_MIN_CONN_INT  0xffff /**< Minimum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_SLAVE_LATENCY 0
+#define GAP_PPCP_CONN_TIMEOUT 0xffff /** Connection Supervision timeout multiplier as a multiple of 10msec, 0xFFFF means no specific value requested */
+
+#define NB_SETUP_MESSAGES 18
+#define SETUP_MESSAGES_CONTENT {\
+    {0x00,\
+        {\
+            0x07,0x06,0x00,0x00,0x03,0x02,0x42,0x07,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x04,0x00,0x01,0x00,0x00,0x06,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x50,0x03,0x90,0x01,0xff,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x38,0xff,0xff,0x02,0x58,0x0a,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x50,0x00,0x00,\
+            0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x05,0x06,0x10,0x54,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x00,0x04,0x04,0x02,0x02,0x00,0x01,0x28,0x00,0x01,0x00,0x18,0x04,0x04,0x05,0x05,0x00,\
+            0x02,0x28,0x03,0x01,0x0e,0x03,0x00,0x00,0x2a,0x04,0x14,0x0d,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x1c,0x0d,0x00,0x03,0x2a,0x00,0x01,0x46,0x69,0x6b,0x65,0x6e,0x20,0x44,0x69,0x73,0x70,\
+            0x6c,0x61,0x79,0x04,0x04,0x05,0x05,0x00,0x04,0x28,0x03,0x01,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x38,0x02,0x05,0x00,0x01,0x2a,0x06,0x04,0x03,0x02,0x00,0x05,0x2a,0x01,0x01,0x00,0x00,\
+            0x04,0x04,0x05,0x05,0x00,0x06,0x28,0x03,0x01,0x02,0x07,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x54,0x04,0x2a,0x06,0x04,0x09,0x08,0x00,0x07,0x2a,0x04,0x01,0xff,0xff,0xff,0xff,0x00,\
+            0x00,0xff,0xff,0x04,0x04,0x02,0x02,0x00,0x08,0x28,0x00,0x01,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x70,0x01,0x18,0x04,0x04,0x10,0x10,0x00,0x09,0x28,0x00,0x01,0x3f,0xd8,0x1f,0x4a,0x8e,\
+            0xbc,0xd3,0x70,0xc5,0x59,0x5d,0x03,0x01,0x00,0xd0,0x32,0x04,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x8c,0x04,0x13,0x13,0x00,0x0a,0x28,0x03,0x01,0x0e,0x0b,0x00,0x3f,0xd8,0x1f,0x4a,0x8e,\
+            0xbc,0xd3,0x70,0xc5,0x59,0x5d,0x03,0x02,0x00,0xd0,0x32,0x46,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xa8,0x14,0x03,0x02,0x00,0x0b,0x00,0x02,0x02,0x12,0x34,0x04,0x04,0x13,0x13,0x00,0x0c,\
+            0x28,0x03,0x01,0x0a,0x0d,0x00,0x3f,0xd8,0x1f,0x4a,0x8e,0xbc,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1a,0x06,0x20,0xc4,0xd3,0x70,0xc5,0x59,0x5d,0x03,0x03,0x00,0xd0,0x32,0x46,0x14,0x04,0x03,0x00,0x0d,\
+            0x00,0x03,0x02,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x40,0x00,0x2a,0x00,0x01,0x00,0x80,0x04,0x00,0x03,0x00,0x00,0x00,0x02,0x02,0x00,0x90,0x04,\
+            0x00,0x0b,0x00,0x00,0x00,0x03,0x02,0x00,0x10,0x04,0x00,0x0d,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x05,0x06,0x40,0x1c,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x13,0x06,0x50,0x00,0x3f,0xd8,0x1f,0x4a,0x8e,0xbc,0xd3,0x70,0xc5,0x59,0x5d,0x03,0x00,0x00,0xd0,0x32,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x0c,0x06,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x06,0x06,0xf0,0x00,0x03,0xf7,0x6c,\
+        },\
+    },\
+}
+
+#endif
+