o Initial import of trygvis.io soil moisture device.

8 files changed, 1193 insertions, 0 deletions

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..d52f7b7
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,10 @@
+BOARD_TAG		  = leonardo
+#BOARD_TAG		   = blendmicro16
+#DEVICE_PORT	   = /dev/ttyACM0
+MONITOR_BAUDRATE  = 115200
+MONITOR_PORT	 ?= /dev/ttyACM0
+
+ARDUINO_LIBS = BLE SPI
+
+ARDMK_DIR ?= /usr/share/arduino
+include $(ARDMK_DIR)/Arduino.mk
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..428ce70
--- /dev/null
+++ b/README.md
@@ -0,0 +1,9 @@
+# Endpoints
+
+## Soil Moisture
+
+### Soil Moisture Level
+
+Format: two bytes of data. Byte #1: sensor id, byte #2: sensor level (unsigned int, 0-255).
+
+Sends notices, same data format.
diff --git a/app.cpp b/app.cpp
new file mode 100644
index 0000000..909a097
--- /dev/null
+++ b/app.cpp
@@ -0,0 +1,91 @@
+#include "app.h"
+
+#include <Arduino.h>
+#include <HardwareSerial.h>
+
+// http://bleaklow.com/2010/09/05/progmem_and_gcc_bug_34734.html
+#undef PROGMEM
+#define PROGMEM __attribute__((section(".progmem.data")))
+
+#define SENSOR_COUNT 1
+
+// See http://redbearlab.com/blendmicro/
+struct sm_sensor {
+  uint8_t pin;
+  uint8_t value;
+} gauges[SENSOR_COUNT] = {
+  { 9, 0},
+};
+
+void on_loop() {
+  static unsigned long last = 0, now;
+  
+  static uint8_t x = 10;
+
+  now = millis();
+  if (now - last > 3000) {
+    last = now;
+    sm_res data;
+    data.len = sizeof(struct sm_get_sensor_level_res);
+    data.code = SM_CMD_GET_SENSOR_LEVEL;
+    data.get_sensor_level.level = x;
+    x++;
+    if(x == 0) {
+      x = 10;
+    }
+
+    if(x % 2 == 0) {
+      notify_soil_moisture(&data);
+    } else {
+      notify_battery_level(x);
+    }
+  }
+}
+
+void on_soil_moisture(uint8_t *data, uint8_t len) {
+  Serial.print(F("on_soil_moisture, data[0]="));
+  Serial.print(data[0], HEX);
+  Serial.print(F(", data[1]="));
+  Serial.println(data[1], HEX);
+
+  struct sm_req *cmd = (struct sm_req *) data;
+  struct sm_res res;
+
+  res.code = cmd->code;
+
+  Serial.print("code=");
+  Serial.println(cmd->code, DEC);
+
+  switch(cmd->code) {
+    case SM_CMD_GET_SENSOR_COUNT:
+      res.len = sizeof(struct sm_get_sensor_count_res);
+      res.get_sensor_count.count = SENSOR_COUNT;
+      break;
+    case SM_CMD_SET_SENSOR_THRESHOLD:
+//      res.len = sizeof(struct fsp_set_gauge_res);
+//      if (cmd->set_gauge.gauge < GAUGE_COUNT) {
+//        analogWrite(gauges[cmd->set_gauge.gauge].pin, cmd->set_gauge.value);
+//        gauges[cmd->set_gauge.gauge].value = cmd->set_gauge.value;
+//      }
+
+      break;
+    case SM_CMD_GET_SENSOR_LEVEL:
+//      res.len = sizeof(struct fsp_get_gauge_res);
+//      if (cmd->get_gauge.gauge < GAUGE_COUNT) {
+//        res.get_gauge.gauge = cmd->get_gauge.gauge;
+//        res.get_gauge.value = gauges[cmd->get_gauge.gauge].value;
+//      } else {
+//        res.code = FSP_CMD_FAIL;
+//        res.len = 0;
+//      }
+      break;
+    default:
+      res.code = SM_CMD_FAIL;
+      res.len = 0;
+      break;
+  }
+
+//  tx_soil_moisture(&res);
+}
+
+
diff --git a/app.h b/app.h
new file mode 100644
index 0000000..af3c39a
--- /dev/null
+++ b/app.h
@@ -0,0 +1,66 @@
+#ifndef APP_H
+#define APP_H
+
+#include <stdint.h>
+
+enum sm_cmd_code {
+  SM_CMD_GET_SENSOR_COUNT     = 1,
+  SM_CMD_SET_SENSOR_THRESHOLD = 2,
+  SM_CMD_GET_SENSOR_LEVEL     = 3,
+  SM_CMD_FAIL                 = 255,
+};
+
+struct sm_get_sensor_count_req {
+};
+
+struct sm_get_sensor_count_res {
+  uint8_t count;
+};
+
+struct sm_set_sensor_threshold_req {
+  uint8_t sensor;
+  uint8_t threshold;
+};
+
+struct sm_set_sensor_threshold_res {
+};
+
+struct sm_get_sensor_level_req {
+  uint8_t sensor;
+};
+
+struct sm_get_sensor_level_res {
+  uint8_t sensor;
+  uint8_t level;
+};
+
+struct sm_req {
+  uint8_t code;
+  union {
+    struct sm_get_sensor_count_req get_sensor_count;
+    struct sm_get_sensor_level_req get_sensor_level;
+    struct sm_set_sensor_threshold_req set_sensor_threshold;
+  };
+};
+
+struct sm_res {
+  uint8_t len;
+  uint8_t code;
+  union {
+    struct sm_get_sensor_count_res get_sensor_count;
+    struct sm_get_sensor_level_res get_sensor_level;
+    struct sm_set_sensor_threshold_res set_sensor_threshold;
+  };
+};
+
+void on_loop();
+
+bool tx_soil_moisture(struct sm_res *res);
+void notify_soil_moisture(struct sm_res *res);
+void notify_battery_level(uint8_t value);
+
+void on_soil_moisture(uint8_t *data, uint8_t len);
+
+#endif
+
+
diff --git a/services.h b/services.h
new file mode 100644
index 0000000..0344b5f
--- /dev/null
+++ b/services.h
@@ -0,0 +1,213 @@
+/**
+* This file is autogenerated by nRFgo Studio 1.17.1.3252
+*/
+
+#ifndef SETUP_MESSAGES_H__
+#define SETUP_MESSAGES_H__
+
+#include "hal_platform.h"
+#include "aci.h"
+
+
+#define SETUP_ID 0
+#define SETUP_FORMAT 3 /** nRF8001 D */
+#define ACI_DYNAMIC_DATA_SIZE 165
+
+/* Service: Gap - Characteristic: Device name - Pipe: SET */
+#define PIPE_GAP_DEVICE_NAME_SET          1
+#define PIPE_GAP_DEVICE_NAME_SET_MAX_SIZE 10
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: BROADCAST */
+#define PIPE_BATTERY_BATTERY_LEVEL_BROADCAST          2
+#define PIPE_BATTERY_BATTERY_LEVEL_BROADCAST_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: TX */
+#define PIPE_BATTERY_BATTERY_LEVEL_TX          3
+#define PIPE_BATTERY_BATTERY_LEVEL_TX_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_LEVEL_SET          4
+#define PIPE_BATTERY_BATTERY_LEVEL_SET_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Power State - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_POWER_STATE_SET          5
+#define PIPE_BATTERY_BATTERY_POWER_STATE_SET_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level State - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_LEVEL_STATE_SET          6
+#define PIPE_BATTERY_BATTERY_LEVEL_STATE_SET_MAX_SIZE 2
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: BROADCAST */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST          7
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: TX */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX          8
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: SET */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET          9
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: BROADCAST */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_1          10
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_1_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: TX */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_1          11
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_1_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: SET */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_1          12
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_1_MAX_SIZE 5
+
+
+#define NUMBER_OF_PIPES 12
+
+#define SERVICES_PIPE_TYPE_MAPPING_CONTENT {\
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+}
+
+#define GAP_PPCP_MAX_CONN_INT 0xffff /**< Maximum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_MIN_CONN_INT  0xffff /**< Minimum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_SLAVE_LATENCY 0
+#define GAP_PPCP_CONN_TIMEOUT 0xffff /** Connection Supervision timeout multiplier as a multiple of 10msec, 0xFFFF means no specific value requested */
+
+#define NB_SETUP_MESSAGES 21
+#define SETUP_MESSAGES_CONTENT {\
+    {0x00,\
+        {\
+            0x07,0x06,0x00,0x00,0x03,0x02,0x42,0x07,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x0c,0x01,0x01,0x00,0x00,0x06,0x00,0x01,\
+            0x81,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x90,0x00,0xff,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x38,0xff,0xff,0x02,0x58,0x0a,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x05,0x06,0x10,0x54,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x00,0x04,0x04,0x02,0x02,0x00,0x01,0x28,0x00,0x01,0x00,0x18,0x04,0x04,0x05,0x05,0x00,\
+            0x02,0x28,0x03,0x01,0x0e,0x03,0x00,0x00,0x2a,0x04,0x14,0x0a,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x1c,0x03,0x00,0x03,0x2a,0x00,0x01,0x77,0x61,0x74,0x64,0x69,0x63,0x73,0x65,0x6d,0x69,\
+            0x04,0x04,0x05,0x05,0x00,0x04,0x28,0x03,0x01,0x02,0x05,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x38,0x01,0x2a,0x06,0x04,0x03,0x02,0x00,0x05,0x2a,0x01,0x01,0x00,0x00,0x04,0x04,0x05,\
+            0x05,0x00,0x06,0x28,0x03,0x01,0x02,0x07,0x00,0x04,0x2a,0x06,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x54,0x04,0x09,0x08,0x00,0x07,0x2a,0x04,0x01,0xff,0xff,0xff,0xff,0x00,0x00,0xff,0xff,\
+            0x04,0x04,0x02,0x02,0x00,0x08,0x28,0x00,0x01,0x01,0x18,0x04,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x70,0x04,0x02,0x02,0x00,0x09,0x28,0x00,0x01,0x0f,0x18,0x04,0x04,0x05,0x05,0x00,0x0a,\
+            0x28,0x03,0x01,0x12,0x0b,0x00,0x19,0x2a,0x16,0x04,0x02,0x01,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x8c,0x00,0x0b,0x2a,0x19,0x01,0x10,0x46,0x14,0x03,0x02,0x00,0x0c,0x29,0x02,0x01,0x00,\
+            0x00,0x04,0x04,0x05,0x05,0x00,0x0d,0x28,0x03,0x01,0x02,0x0e,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xa8,0x00,0x1a,0x2a,0x06,0x04,0x02,0x01,0x00,0x0e,0x2a,0x1a,0x01,0x00,0x04,0x04,0x05,\
+            0x05,0x00,0x0f,0x28,0x03,0x01,0x02,0x10,0x00,0x1b,0x2a,0x06,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xc4,0x04,0x03,0x02,0x00,0x10,0x2a,0x1b,0x01,0x00,0x00,0x04,0x04,0x02,0x02,0x00,0x11,\
+            0x28,0x00,0x01,0x10,0x00,0x04,0x04,0x05,0x05,0x00,0x12,0x28,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xe0,0x03,0x01,0x12,0x13,0x00,0x11,0x00,0x16,0x04,0x06,0x05,0x00,0x13,0x00,0x11,0x01,\
+            0xaa,0x55,0xaa,0x55,0xaa,0x46,0x14,0x03,0x02,0x00,0x14,0x29,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xfc,0x02,0x01,0x00,0x00,0x04,0x04,0x02,0x02,0x00,0x15,0x28,0x00,0x01,0x10,0x00,0x04,\
+            0x04,0x05,0x05,0x00,0x16,0x28,0x03,0x01,0x12,0x17,0x00,0x11,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1e,0x06,0x21,0x18,0x00,0x14,0x04,0x05,0x00,0x00,0x17,0x00,0x11,0x01,0x00,0x00,0x00,0x00,0x00,0x46,\
+            0x14,0x03,0x02,0x00,0x18,0x29,0x02,0x01,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x40,0x00,0x2a,0x00,0x01,0x00,0x80,0x04,0x00,0x03,0x00,0x00,0x2a,0x19,0x01,0x00,0x83,0x04,\
+            0x00,0x0b,0x00,0x0c,0x2a,0x1a,0x01,0x00,0x80,0x04,0x00,0x0e,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x40,0x1c,0x00,0x00,0x2a,0x1b,0x01,0x00,0x80,0x04,0x00,0x10,0x00,0x00,0x00,0x11,0x01,0x00,\
+            0x83,0x04,0x00,0x13,0x00,0x14,0x00,0x11,0x01,0x00,0x83,0x04,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x07,0x06,0x40,0x38,0x00,0x17,0x00,0x18,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x15,0x06,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+            0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x06,0x06,0xf0,0x00,0x03,0xda,0x64,\
+        },\
+    },\
+}
+
+#endif
diff --git a/services_lock.h b/services_lock.h
new file mode 100644
index 0000000..fe0057a
--- /dev/null
+++ b/services_lock.h
@@ -0,0 +1,217 @@
+/**
+* This file is autogenerated by nRFgo Studio 1.17.1.3252
+*/
+
+#ifndef SETUP_MESSAGES_H__
+#define SETUP_MESSAGES_H__
+
+#include "hal_platform.h"
+#include "aci.h"
+
+// You have now chosen to upload the configuration to OTP on the device.
+// This will result in a device that you can not modify afterwards. If this is your intention,
+// remove this comment and the #error below
+#error Generating configuration for OTP. Please verify usage by removing this error message from include file.
+
+#define SETUP_ID 0
+#define SETUP_FORMAT 3 /** nRF8001 D */
+#define ACI_DYNAMIC_DATA_SIZE 165
+
+/* Service: Gap - Characteristic: Device name - Pipe: SET */
+#define PIPE_GAP_DEVICE_NAME_SET          1
+#define PIPE_GAP_DEVICE_NAME_SET_MAX_SIZE 10
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: BROADCAST */
+#define PIPE_BATTERY_BATTERY_LEVEL_BROADCAST          2
+#define PIPE_BATTERY_BATTERY_LEVEL_BROADCAST_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: TX */
+#define PIPE_BATTERY_BATTERY_LEVEL_TX          3
+#define PIPE_BATTERY_BATTERY_LEVEL_TX_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_LEVEL_SET          4
+#define PIPE_BATTERY_BATTERY_LEVEL_SET_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Power State - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_POWER_STATE_SET          5
+#define PIPE_BATTERY_BATTERY_POWER_STATE_SET_MAX_SIZE 1
+
+/* Service: Battery - Characteristic: Battery Level State - Pipe: SET */
+#define PIPE_BATTERY_BATTERY_LEVEL_STATE_SET          6
+#define PIPE_BATTERY_BATTERY_LEVEL_STATE_SET_MAX_SIZE 2
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: BROADCAST */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST          7
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: TX */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX          8
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: SET */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET          9
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: BROADCAST */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_1          10
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST_1_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: TX */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_1          11
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX_1_MAX_SIZE 5
+
+/* Service: Soil Moisture - Characteristic: Soil Moisture Level - Pipe: SET */
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_1          12
+#define PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET_1_MAX_SIZE 5
+
+
+#define NUMBER_OF_PIPES 12
+
+#define SERVICES_PIPE_TYPE_MAPPING_CONTENT {\
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+  {ACI_STORE_LOCAL, ACI_TX_BROADCAST},   \
+  {ACI_STORE_LOCAL, ACI_TX},   \
+  {ACI_STORE_LOCAL, ACI_SET},   \
+}
+
+#define GAP_PPCP_MAX_CONN_INT 0xffff /**< Maximum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_MIN_CONN_INT  0xffff /**< Minimum connection interval as a multiple of 1.25 msec , 0xFFFF means no specific value requested */
+#define GAP_PPCP_SLAVE_LATENCY 0
+#define GAP_PPCP_CONN_TIMEOUT 0xffff /** Connection Supervision timeout multiplier as a multiple of 10msec, 0xFFFF means no specific value requested */
+
+#define NB_SETUP_MESSAGES 21
+#define SETUP_MESSAGES_CONTENT {\
+    {0x00,\
+        {\
+            0x07,0x06,0x00,0x00,0x03,0x02,0x42,0x07,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x0c,0x01,0x01,0x00,0x00,0x06,0x00,0x01,\
+            0x81,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x90,0x00,0xff,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x10,0x38,0xff,0xff,0x02,0x58,0x0a,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,\
+            0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x05,0x06,0x10,0x54,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x00,0x04,0x04,0x02,0x02,0x00,0x01,0x28,0x00,0x01,0x00,0x18,0x04,0x04,0x05,0x05,0x00,\
+            0x02,0x28,0x03,0x01,0x0e,0x03,0x00,0x00,0x2a,0x04,0x14,0x0a,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x1c,0x03,0x00,0x03,0x2a,0x00,0x01,0x77,0x61,0x74,0x64,0x69,0x63,0x73,0x65,0x6d,0x69,\
+            0x04,0x04,0x05,0x05,0x00,0x04,0x28,0x03,0x01,0x02,0x05,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x38,0x01,0x2a,0x06,0x04,0x03,0x02,0x00,0x05,0x2a,0x01,0x01,0x00,0x00,0x04,0x04,0x05,\
+            0x05,0x00,0x06,0x28,0x03,0x01,0x02,0x07,0x00,0x04,0x2a,0x06,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x54,0x04,0x09,0x08,0x00,0x07,0x2a,0x04,0x01,0xff,0xff,0xff,0xff,0x00,0x00,0xff,0xff,\
+            0x04,0x04,0x02,0x02,0x00,0x08,0x28,0x00,0x01,0x01,0x18,0x04,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x70,0x04,0x02,0x02,0x00,0x09,0x28,0x00,0x01,0x0f,0x18,0x04,0x04,0x05,0x05,0x00,0x0a,\
+            0x28,0x03,0x01,0x12,0x0b,0x00,0x19,0x2a,0x16,0x04,0x02,0x01,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0x8c,0x00,0x0b,0x2a,0x19,0x01,0x10,0x46,0x14,0x03,0x02,0x00,0x0c,0x29,0x02,0x01,0x00,\
+            0x00,0x04,0x04,0x05,0x05,0x00,0x0d,0x28,0x03,0x01,0x02,0x0e,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xa8,0x00,0x1a,0x2a,0x06,0x04,0x02,0x01,0x00,0x0e,0x2a,0x1a,0x01,0x00,0x04,0x04,0x05,\
+            0x05,0x00,0x0f,0x28,0x03,0x01,0x02,0x10,0x00,0x1b,0x2a,0x06,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xc4,0x04,0x03,0x02,0x00,0x10,0x2a,0x1b,0x01,0x00,0x00,0x04,0x04,0x02,0x02,0x00,0x11,\
+            0x28,0x00,0x01,0x10,0x00,0x04,0x04,0x05,0x05,0x00,0x12,0x28,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xe0,0x03,0x01,0x12,0x13,0x00,0x11,0x00,0x16,0x04,0x06,0x05,0x00,0x13,0x00,0x11,0x01,\
+            0xaa,0x55,0xaa,0x55,0xaa,0x46,0x14,0x03,0x02,0x00,0x14,0x29,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x20,0xfc,0x02,0x01,0x00,0x00,0x04,0x04,0x02,0x02,0x00,0x15,0x28,0x00,0x01,0x10,0x00,0x04,\
+            0x04,0x05,0x05,0x00,0x16,0x28,0x03,0x01,0x12,0x17,0x00,0x11,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1e,0x06,0x21,0x18,0x00,0x14,0x04,0x05,0x00,0x00,0x17,0x00,0x11,0x01,0x00,0x00,0x00,0x00,0x00,0x46,\
+            0x14,0x03,0x02,0x00,0x18,0x29,0x02,0x01,0x00,0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x40,0x00,0x2a,0x00,0x01,0x00,0x80,0x04,0x00,0x03,0x00,0x00,0x2a,0x19,0x01,0x00,0x83,0x04,\
+            0x00,0x0b,0x00,0x0c,0x2a,0x1a,0x01,0x00,0x80,0x04,0x00,0x0e,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x1f,0x06,0x40,0x1c,0x00,0x00,0x2a,0x1b,0x01,0x00,0x80,0x04,0x00,0x10,0x00,0x00,0x00,0x11,0x01,0x00,\
+            0x83,0x04,0x00,0x13,0x00,0x14,0x00,0x11,0x01,0x00,0x83,0x04,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x07,0x06,0x40,0x38,0x00,0x17,0x00,0x18,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x15,0x06,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,\
+            0x00,0x00,\
+        },\
+    },\
+    {0x00,\
+        {\
+            0x06,0x06,0xf0,0x00,0x83,0x4b,0xec,\
+        },\
+    },\
+}
+
+#endif
diff --git a/trygvisio_soil_moisture.ino b/trygvisio_soil_moisture.ino
new file mode 100644
index 0000000..b8b3bfd
--- /dev/null
+++ b/trygvisio_soil_moisture.ino
@@ -0,0 +1,420 @@
+#include <SPI.h>
+#include <lib_aci.h>
+#include <aci_setup.h>
+
+#include "services.h"
+#include "app.h"
+
+static services_pipe_type_mapping_t services_pipe_type_mapping[NUMBER_OF_PIPES] = SERVICES_PIPE_TYPE_MAPPING_CONTENT;
+static hal_aci_data_t setup_msgs[NB_SETUP_MESSAGES] PROGMEM = SETUP_MESSAGES_CONTENT;
+
+static struct aci_state_t aci_state;
+static hal_aci_evt_t aci_data;
+static bool timing_change_done  = false;
+
+void __ble_assert(const char *file, uint16_t line)
+{
+  Serial.print("ERROR ");
+  Serial.print(file);
+  Serial.print(": ");
+  Serial.print(line);
+  Serial.print("\n");
+  while(1);
+}
+
+void setup() {
+#if defined(BLEND_MICRO_8MHZ)
+  // As the F_CPU = 8000000UL, the USB core make the PLLCSR = 0x02
+  // But the external xtal is 16000000Hz, so correct it here.
+  PLLCSR |= 0x10;             // Need 16 MHz xtal
+  while (!(PLLCSR & (1<<PLOCK)));     // wait for lock pll
+#elif defined(BLEND_MICRO_16MHZ)
+  // The CPU clock in bootloader is 8MHz, change to 16MHz for sketches to run (i.e. overclock running at 3.3v).
+  CLKPR = 0x80;
+  CLKPR = 0;
+#endif
+
+  Serial.begin((unsigned int)115200);
+
+  // Wait until the serial port is available (useful only for the Leonardo)
+  // As the Leonardo board is not reseted every time you open the Serial Monitor
+#if defined (__AVR_ATmega32U4__)
+  while(!Serial) {
+  }
+
+  delay(1000);
+#elif defined(__PIC32MX__)
+  delay(1000);
+#endif
+
+  setup_rf();
+}
+
+void setup_rf() {
+  Serial.println(F("setup_rf()"));
+  // Point ACI data structures to the the setup data that the nRFgo studio generated for the nRF8001
+  if (NULL != services_pipe_type_mapping) {
+    aci_state.aci_setup_info.services_pipe_type_mapping = &services_pipe_type_mapping[0];
+  }
+  else {
+    aci_state.aci_setup_info.services_pipe_type_mapping = NULL;
+  }
+  aci_state.aci_setup_info.number_of_pipes    = NUMBER_OF_PIPES;
+  aci_state.aci_setup_info.setup_msgs         = (hal_aci_data_t*)setup_msgs;
+  aci_state.aci_setup_info.num_setup_msgs     = NB_SETUP_MESSAGES;
+
+  // Tell the ACI library, the MCU to nRF8001 pin connections.
+  // The Active pin is optional and can be marked UNUSED
+//  aci_state.aci_pins.board_name = REDBEARLAB_SHIELD_V2;
+  aci_state.aci_pins.board_name = REDBEARLAB_SHIELD_V1_1;
+  aci_state.aci_pins.reqn_pin   = 6;
+  aci_state.aci_pins.rdyn_pin   = 7;
+  aci_state.aci_pins.mosi_pin   = MOSI;
+  aci_state.aci_pins.miso_pin   = MISO;
+  aci_state.aci_pins.sck_pin    = SCK;
+
+  // SPI_CLOCK_DIV8  = 2MHz SPI speed
+  // SPI_CLOCK_DIV16 = 1MHz SPI speed
+  aci_state.aci_pins.spi_clock_divider      = SPI_CLOCK_DIV8;
+  aci_state.aci_pins.reset_pin              = UNUSED; //4 for Nordic board, UNUSED for REDBEARLAB_SHIELD_V1_1
+  aci_state.aci_pins.active_pin             = UNUSED;
+  aci_state.aci_pins.optional_chip_sel_pin  = UNUSED;
+
+  aci_state.aci_pins.interface_is_interrupt = false; //Interrupts still not available in Chipkit
+  aci_state.aci_pins.interrupt_number       = 4;
+
+  // We reset the nRF8001 here by toggling the RESET line connected to the nRF8001
+  // If the RESET line is not available we call the ACI Radio Reset to soft reset the nRF8001
+  // then we initialize the data structures required to setup the nRF8001
+  // The second parameter is for turning debug printing on for the ACI Commands and Events so they be printed on the Serial
+  lib_aci_init(&aci_state, false);
+  Serial.println(F("lib_aci_init done"));
+}
+
+static bool rf_started = false;
+static bool setup_required = false;
+
+static void aci_loop() {
+  uint8_t pipe_number;
+  int ret;
+
+  // We enter the if statement only when there is a ACI event available to be processed
+  if (lib_aci_event_get(&aci_state, &aci_data)) {
+    aci_evt_t * aci_evt;
+    aci_evt = &aci_data.evt;
+
+    switch(aci_evt->evt_opcode) {
+    case ACI_EVT_DEVICE_STARTED:
+      Serial.println(F("ACI_EVT_DEVICE_STARTED"));
+      aci_state.data_credit_total = aci_evt->params.device_started.credit_available;
+
+      Serial.print(F("aci_state.data_credit_total="));
+      Serial.println(aci_state.data_credit_total, DEC);
+
+      switch(aci_evt->params.device_started.device_mode) {
+      case ACI_DEVICE_SETUP:
+        Serial.println(F("ACI_DEVICE_SETUP"));
+        rf_started = true;
+        setup_required = true;
+        break;
+
+      case ACI_DEVICE_STANDBY:
+        Serial.println(F("ACI_DEVICE_STANDBY"));
+        if (aci_evt->params.device_started.hw_error) {
+          delay(20); // Magic number used to make sure the HW error event is handled correctly.
+        }
+        else {
+          lib_aci_connect(180/* in seconds */, 0x0050 /* advertising interval 50ms*/);
+          // lib_aci_broadcast(10/* in seconds */, 0x0100 /* advertising interval 100ms */);
+          ret = lib_aci_open_adv_pipe(PIPE_BATTERY_BATTERY_LEVEL_BROADCAST);
+          ret = lib_aci_open_adv_pipe(PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST);
+          Serial.print(F("Advertising started, ret="));
+          Serial.println(ret, DEC);
+        }
+        break;
+      case ACI_DEVICE_INVALID:
+      case ACI_DEVICE_TEST:
+      case ACI_DEVICE_SLEEP:
+        // Ignored
+        break;
+      }
+      break;
+
+    case ACI_EVT_CMD_RSP:
+      // Serial.println(F("ACI_EVT_CMD_RSP"));
+      // Serial.print(F("aci_evt->params.cmd_rsp.cmd_opcode="));
+      // Serial.println(aci_evt->params.cmd_rsp.cmd_opcode, HEX);
+      // Serial.print(F("aci_evt->params.cmd_rsp.cmd_status="));
+      // Serial.println(aci_evt->params.cmd_rsp.cmd_status, HEX);
+
+      //If an ACI command response event comes with an error -> stop
+      if (aci_evt->params.cmd_rsp.cmd_status != ACI_STATUS_SUCCESS) {
+        //ACI ReadDynamicData and ACI WriteDynamicData will have status codes of
+        //TRANSACTION_CONTINUE and TRANSACTION_COMPLETE
+        //all other ACI commands will have status code of ACI_STATUS_SCUCCESS for a successful command//
+        // Serial.print(F("ACI Command "));
+        // Serial.println(aci_evt->params.cmd_rsp.cmd_opcode, HEX);
+        // Serial.print(F("Evt Cmd respone: Status "));
+        // Serial.println(aci_evt->params.cmd_rsp.cmd_status, HEX);
+      }
+      if (aci_evt->params.cmd_rsp.cmd_opcode == ACI_CMD_GET_DEVICE_VERSION) {
+        //Store the version and configuration information of the nRF8001 in the Hardware Revision String Characteristic
+        // lib_aci_set_local_data(&aci_state, PIPE_DEVICE_INFORMATION_HARDWARE_REVISION_STRING_SET,
+        //   (uint8_t *)&(aci_evt->params.cmd_rsp.params.get_device_version),
+        //   sizeof(aci_evt_cmd_rsp_params_get_device_version_t));
+      }
+      break;
+
+    case ACI_EVT_CONNECTED:
+      Serial.println(F("ACI_EVT_CONNECTED"));
+      timing_change_done              = false;
+      aci_state.data_credit_available = aci_state.data_credit_total;
+      Serial.print(F("aci_state.data_credit_available="));
+      Serial.println(aci_state.data_credit_available, DEC);
+
+      // Get the device version of the nRF8001 and store it in the Hardware Revision String.
+      // This will trigger a ACI_CMD_GET_DEVICE_VERSION.
+      lib_aci_device_version();
+      break;
+
+    case ACI_EVT_PIPE_STATUS:
+      Serial.println(F("ACI_EVT_PIPE_STATUS"));
+      show_pipes();
+      break;
+
+    case ACI_EVT_TIMING:
+      Serial.println(F("ACI_EVT_TIMING"));
+      break;
+
+    case ACI_EVT_DISCONNECTED:
+      Serial.println(F("ACI_EVT_DISCONNECTED"));
+
+      lib_aci_connect(180/* in seconds */, 0x0100 /* advertising interval 100ms*/);
+      ret = lib_aci_open_adv_pipe(PIPE_BATTERY_BATTERY_LEVEL_BROADCAST);
+      ret = lib_aci_open_adv_pipe(PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_BROADCAST);
+      Serial.print(F("Advertising started, ret="));
+      Serial.println(ret, DEC);
+
+//      Serial.print(F("ACI_EVT_DISCONNECTED: "));
+//      Serial.println(ACI_STATUS_ERROR_ADVT_TIMEOUT == aci_evt->params.disconnected.aci_status ?
+//        F("Broadcasting timed out") : F("Link loss"));
+      // lib_aci_broadcast(10/* in seconds */, 0x0100 /* advertising interval 100ms */);
+      // Serial.print(F("Broadcast advertising started, ret="));
+      // Serial.println(ret, DEC);
+      break;
+
+    case ACI_EVT_DATA_RECEIVED:
+      pipe_number = aci_evt->params.data_received.rx_data.pipe_number;
+
+      Serial.print(F("ACI_EVT_DATA_RECEIVED: pipe_number="));
+      Serial.println(pipe_number, DEC);
+      /*
+      if (pipe_number == PIPE_FIKEN_STATUS_PANEL_GAUGE_DATA_RX_ACK) {
+        if (aci_evt->len != PIPE_FIKEN_STATUS_PANEL_GAUGE_DATA_RX_ACK_MAX_SIZE) {
+          break;
+        }
+        on_gauge_data(aci_evt->params.data_received.rx_data.aci_data, aci_evt->len - 2);
+        lib_aci_send_ack(&aci_state, PIPE_FIKEN_STATUS_PANEL_GAUGE_DATA_RX_ACK);
+      }
+
+      if (pipe_number == PIPE_FIKEN_STATUS_PANEL_GAUGE_CONTROL_RX) {
+        uint8_t len = aci_evt->len - 2;
+        // if (aci_evt->len != PIPE_FIKEN_STATUS_PANEL_GAUGE_CONTROL_RX_MAX_SIZE) {
+        //  break;
+        // }
+
+        on_gauge_ctrl(aci_evt->params.data_received.rx_data.aci_data, len);
+      }
+      */
+      break;
+
+    case ACI_EVT_DATA_CREDIT:
+      Serial.println(F("ACI_EVT_DATA_CREDIT"));
+      aci_state.data_credit_available = aci_state.data_credit_available + aci_evt->params.data_credit.credit;
+      Serial.print(F("aci_state.data_credit_available="));
+      Serial.println(aci_state.data_credit_available, DEC);
+      break;
+
+    case ACI_EVT_PIPE_ERROR:
+      Serial.println(F("ACI_EVT_PIPE_ERROR"));
+      //See the appendix in the nRF8001 Product Specication for details on the error codes
+      Serial.print(F("ACI Evt Pipe Error: Pipe #:"));
+      Serial.print(aci_evt->params.pipe_error.pipe_number, DEC);
+      Serial.print(F("  Pipe Error Code: 0x"));
+      Serial.println(aci_evt->params.pipe_error.error_code, HEX);
+
+      // Increment the credit available as the data packet was not sent.
+      // The pipe error also represents the Attribute protocol Error Response sent from the peer and that should not be counted
+      // for the credit.
+      if (ACI_STATUS_ERROR_PEER_ATT_ERROR != aci_evt->params.pipe_error.error_code) {
+        aci_state.data_credit_available++;
+      }
+      break;
+
+    case ACI_EVT_HW_ERROR:
+      Serial.println(F("ACI_EVT_HW_ERROR"));
+      Serial.print(F("HW error: "));
+      Serial.println(aci_evt->params.hw_error.line_num, DEC);
+
+      for(uint8_t counter = 0; counter <= (aci_evt->len - 3); counter++) {
+        Serial.write(aci_evt->params.hw_error.file_name[counter]); //uint8_t file_name[20];
+      }
+      Serial.println();
+      lib_aci_connect(180/* in seconds */, 0x0050 /* advertising interval 50ms*/);
+      Serial.println(F("Advertising started"));
+      break;
+
+    case ACI_EVT_INVALID:
+      Serial.println(F("ACI_EVT_INVALID"));
+      break;
+    case ACI_EVT_ECHO:
+      Serial.println(F("ACI_EVT_ECHO"));
+      break;
+    case ACI_EVT_BOND_STATUS:
+      Serial.println(F("ACI_EVT_BOND_STATUS"));
+      break;
+    case ACI_EVT_DATA_ACK:
+      Serial.println(F("ACI_EVT_DATA_ACK"));
+      break;
+    case ACI_EVT_DISPLAY_PASSKEY:
+      Serial.println(F("ACI_EVT_DISPLAY_PASSKEY"));
+      break;
+    case ACI_EVT_KEY_REQUEST:
+      Serial.println(F("ACI_EVT_KEY_REQUEST"));
+      break;
+    }
+  }
+  else {
+    // Serial.println(F("No ACI Events available"));
+    // No event in the ACI Event queue and if there is no event in the ACI command queue the arduino can go to sleep
+    // Arduino can go to sleep now
+    // Wakeup from sleep from the RDYN line
+  }
+
+  /* setup_required is set to true when the device starts up and enters setup mode.
+   * It indicates that do_aci_setup() should be called. The flag should be cleared if
+   * do_aci_setup() returns ACI_STATUS_TRANSACTION_COMPLETE.
+   */
+  if (setup_required) {
+    int ret = do_aci_setup(&aci_state);
+    Serial.print(F("do_aci_setup ret="));
+    Serial.println(ret, DEC);
+    if (SETUP_SUCCESS == ret) {
+      setup_required = false;
+    }
+  }
+}
+
+static uint8_t value = 0;
+void loop() {
+  static unsigned long last = 0, now;
+
+  aci_loop();
+
+  if (Serial.available()) {
+    Serial.write(Serial.read());
+  }
+
+  now = millis();
+  if (now - last > 3000) {
+    last = now;
+
+    if (!rf_started) {
+      static int count = 0;
+      static boolean reset_attempted = false;
+      count++;
+
+      if (!reset_attempted) {
+        
+        if (count == 3) {
+          reset_attempted = true;
+          Serial.println(F("RF did not start, resetting RF"));
+  
+          // asm volatile ("jmp 0");
+          // lib_aci_pin_reset();
+          setup_rf();
+          count = 0;
+          return;
+        } else {
+          Serial.println(F("waiting for RF to start"));
+        }
+      }
+      /**/
+    }
+    else if (!setup_required) {
+      value++;
+//      lib_aci_set_local_data(&aci_state, PIPE_FIKEN_STATUS_PANEL_GAUGE_DATA_SET, &value, 1);
+//      Serial.print(F("value="));
+//      Serial.println(value, HEX);
+
+      // show_pipes();
+    }
+  }
+
+  on_loop();
+}
+
+void show_pipes() {
+  for (uint8_t i = 1; i <= NUMBER_OF_PIPES; i++) {
+    uint8_t x = lib_aci_is_pipe_available(&aci_state, i);
+    Serial.print(F("pipe #"));
+    Serial.print(i, DEC);
+    Serial.print(F(", available=?"));
+    Serial.println(x, DEC);
+  }
+}
+
+bool tx__moisture(sm_res *res) {
+  static const uint8_t pipe = PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_TX;
+  uint8_t *data = (uint8_t *)res;
+  uint8_t len = 2 + res->len;
+  bool status = false;
+
+  bool available = lib_aci_is_pipe_available(&aci_state, pipe);
+
+  Serial.print(F("tx_soil_moisture, len="));
+  Serial.println(len, DEC);
+  Serial.print(F("aci_state.data_credit_available="));
+  Serial.println(aci_state.data_credit_available, DEC);
+  Serial.print(F("available="));
+  Serial.println(available, DEC);
+
+  if (available && aci_state.data_credit_available > 0) {
+    status = lib_aci_send_data(pipe, data, len);
+    if (status) {
+      aci_state.data_credit_available--;
+    }
+  }
+  return status;
+}
+
+void notify_battery_level(uint8_t value) {
+  static const uint8_t pipe = PIPE_BATTERY_BATTERY_LEVEL_SET;
+
+  Serial.print(F("notify_battery_level, value="));
+  Serial.println(value, DEC);
+  
+  value = value % 101;
+
+  lib_aci_set_local_data(&aci_state, pipe, &value, 1);
+}
+
+void notify_soil_moisture(sm_res *res) {
+  static const uint8_t pipe = PIPE_SOIL_MOISTURE_SOIL_MOISTURE_LEVEL_SET;
+
+  uint8_t *data = (uint8_t *)res;
+  uint8_t len = 2 + res->len;
+  bool status = false;
+
+  Serial.print(F("notify_soil_moisture, len="));
+  Serial.println(len, DEC);
+  Serial.print(F("aci_state.data_credit_available="));
+  Serial.println(aci_state.data_credit_available, DEC);
+
+//  bool available = lib_aci_is_pipe_available(&aci_state, pipe);
+//  Serial.print(F("available="));
+//  Serial.println(available, DEC);
+
+  status = lib_aci_set_local_data(&aci_state, pipe, data, len);
+}
+
diff --git a/trygvisio_soil_moisture.xml b/trygvisio_soil_moisture.xml
new file mode 100644
index 0000000..3041f3a
--- /dev/null
+++ b/trygvisio_soil_moisture.xml
@@ -0,0 +1,167 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE AttributeServer>
+<Profile Version="1.3">
+    <SetupId>0</SetupId>
+    <Device>nRF8001_Dx</Device>
+    <Service Type="local" PrimaryService="true">
+        <Name>Battery</Name>
+        <Uuid>180f</Uuid>
+        <Characteristic>
+            <Name>Battery Level</Name>
+            <Uuid>2a19</Uuid>
+            <DefaultValue>10</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>1</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>false</Write>
+                <Notify>false</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>false</Broadcast>
+            </Properties>
+            <SetPipe>true</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="1" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+        <Characteristic>
+            <Name>Battery Power State</Name>
+            <Uuid>2a1a</Uuid>
+            <DefaultValue>0</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>1</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>false</Write>
+                <Notify>false</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>false</Broadcast>
+            </Properties>
+            <SetPipe>true</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="1" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+        <Characteristic>
+            <Name>Battery Level State</Name>
+            <Uuid>2a1b</Uuid>
+            <DefaultValue>0</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>2</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>false</Write>
+                <Notify>false</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>false</Broadcast>
+            </Properties>
+            <SetPipe>true</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="1" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+    </Service>
+    <Service Type="local" PrimaryService="true">
+        <Name>Soil Moisture</Name>
+        <Uuid>0010</Uuid>
+        <Characteristic>
+            <Name>Soil Moisture Level</Name>
+            <Uuid>0011</Uuid>
+            <DefaultValue>aa55aa55aa</DefaultValue>
+            <UsePresentationFormat>0</UsePresentationFormat>
+            <MaxDataLength>5</MaxDataLength>
+            <AttributeLenType>1</AttributeLenType>
+            <ForceOpen>false</ForceOpen>
+            <ForceEncryption>false</ForceEncryption>
+            <Properties>
+                <WriteWithoutResponse>false</WriteWithoutResponse>
+                <Write>false</Write>
+                <Notify>true</Notify>
+                <Indicate>false</Indicate>
+                <Broadcast>true</Broadcast>
+            </Properties>
+            <SetPipe>true</SetPipe>
+            <AckIsAuto>false</AckIsAuto>
+            <PresentationFormatDescriptor Value="0000" Exponent="0" Format="4" NameSpace="01" Unit="0000"/>
+            <PeriodForReadingThisCharacteristic>0</PeriodForReadingThisCharacteristic>
+            <PeriodForProperties/>
+        </Characteristic>
+    </Service>
+    <Gapsettings>
+        <Name>wat</Name>
+        <DeviceNameWriteLength>0</DeviceNameWriteLength>
+        <LocalPipeOnDeviceName>false</LocalPipeOnDeviceName>
+        <DeviceNameShortLength>1</DeviceNameShortLength>
+        <Apperance>0000</Apperance>
+        <SecurityLevel>0</SecurityLevel>
+        <AuthenticationReq>0</AuthenticationReq>
+        <IoCapabilities>0</IoCapabilities>
+        <BondTimeout>600</BondTimeout>
+        <SecurityRequestDelay>10</SecurityRequestDelay>
+        <MinimumKeySize>7</MinimumKeySize>
+        <MaximumKeySize>16</MaximumKeySize>
+        <AdvertisingDataBondedBitmap>0</AdvertisingDataBondedBitmap>
+        <AdvertisingDataGeneralBitmap>0</AdvertisingDataGeneralBitmap>
+        <AdvertisingDataBrodcastBitmap>0</AdvertisingDataBrodcastBitmap>
+        <AdvertisingDataBondedScanResponseBitmap>0</AdvertisingDataBondedScanResponseBitmap>
+        <AdvertisingDataGeneralScanResponseBitmap>1000</AdvertisingDataGeneralScanResponseBitmap>
+        <AdvertisingDataBrodcastScanResponseBitmap>0</AdvertisingDataBrodcastScanResponseBitmap>
+        <AdvertisingDataBondedBitmapCustom>0</AdvertisingDataBondedBitmapCustom>
+        <AdvertisingDataGeneralBitmapCustom>0</AdvertisingDataGeneralBitmapCustom>
+        <AdvertisingDataBrodcastBitmapCustom>0</AdvertisingDataBrodcastBitmapCustom>
+        <AdvertisingDataBondedScanResponseBitmapCustom>0</AdvertisingDataBondedScanResponseBitmapCustom>
+        <AdvertisingDataGeneralScanResponseBitmapCustom>0</AdvertisingDataGeneralScanResponseBitmapCustom>
+        <AdvertisingDataBrodcastScanResponseBitmapCustom>0</AdvertisingDataBrodcastScanResponseBitmapCustom>
+        <TxPowerLevelOffset>0</TxPowerLevelOffset>
+        <MinimumConnectionInterval>65535</MinimumConnectionInterval>
+        <MaximumConnectionInterval>65535</MaximumConnectionInterval>
+        <SlaveLatency>0</SlaveLatency>
+        <TimeoutMultipler>65535</TimeoutMultipler>
+        <AddServiceUpdateCharacteristic>false</AddServiceUpdateCharacteristic>
+        <AddServiceUpdateCharacteristicPipe>false</AddServiceUpdateCharacteristicPipe>
+        <TimingChangeDelay>5</TimingChangeDelay>
+        <ServiceToAdvertise>
+            <Uuid>0010</Uuid>
+        </ServiceToAdvertise>
+        <CustomAdTypes>
+            <AdType index="1">
+                <Type>19</Type>
+                <Value>0000</Value>
+            </AdType>
+            <AdType index="2">
+                <Type>18</Type>
+                <Value></Value>
+            </AdType>
+        </CustomAdTypes>
+    </Gapsettings>
+    <Hardwaresettings>
+        <Clocksource>1</Clocksource>
+        <ClockAccuracy>1</ClockAccuracy>
+        <InitialTxPower>3</InitialTxPower>
+        <HfClkSource>0</HfClkSource>
+        <DcDcConverter>0</DcDcConverter>
+        <ActiveSignalModeIndex>0</ActiveSignalModeIndex>
+        <ActiveSignalToTickDistance>0</ActiveSignalToTickDistance>
+        <DynamicWindowLimitingEnabled>false</DynamicWindowLimitingEnabled>
+    </Hardwaresettings>
+    <CurrentInput>
+        <BatteryCharge>220</BatteryCharge>
+        <Master32KhzClockAccuracy>10</Master32KhzClockAccuracy>
+        <ConnectionInterval>1000</ConnectionInterval>
+        <PercentOfTimeSleeping>0</PercentOfTimeSleeping>
+        <PercentOfTimeAdvertising>0</PercentOfTimeAdvertising>
+        <AdvertisingInterval>1280</AdvertisingInterval>
+    </CurrentInput>
+</Profile>