o Seemingly working Mutexes.

o Dropping the privileged/unprivileged split for now.

12 files changed, 0 insertions, 3365 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/ADC_TIM1/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/ADC_TIM1/main.c
deleted file mode 100644
index fbf4cbf..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/ADC_TIM1/main.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/ADC_TIM1/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup DMA_ADC_TIM1
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define ADC1_DR_Address     0x4001244C
-#define TIM1_CCR1_Address   0x40012C34
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-ADC_InitTypeDef           ADC_InitStructure;
-TIM_TimeBaseInitTypeDef   TIM_TimeBaseStructure;
-TIM_OCInitTypeDef         TIM_OCInitStructure;
-DMA_InitTypeDef           DMA_InitStructure;
-  
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-   
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief   Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System Clocks Configuration */
-  RCC_Configuration();
-
-  /* Configure the GPIO ports */
-  GPIO_Configuration();
-
-  /* DMA1 Channel5 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA1_Channel5);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)TIM1_CCR1_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)ADC1_DR_Address;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
-  DMA_InitStructure.DMA_BufferSize = 1;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA1_Channel5, &DMA_InitStructure);
-  /* Enable DMA1 Channel5 */
-  DMA_Cmd(DMA1_Channel5, ENABLE);
-
-  /* ADC1 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = DISABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 1;
-  ADC_Init(ADC1, &ADC_InitStructure);
-
-  /* ADC1 RegularChannelConfig Test */ 
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 1, ADC_SampleTime_55Cycles5);
-
-  /* TIM1 configuration ------------------------------------------------------*/
-  /* Time Base configuration */
-  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); 
-  TIM_TimeBaseStructure.TIM_Period = 0xFF0;
-  TIM_TimeBaseStructure.TIM_Prescaler = 0x0;
-  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;
-  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
-  TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure);
-  /* Channel1 Configuration in PWM mode */
-  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; 
-  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
-  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
-  TIM_OC1Init(TIM1, &TIM_OCInitStructure);
-
-  /* Enable TIM1 */  
-  TIM_Cmd(TIM1, ENABLE);
-  /* Enable TIM1 outputs */
-  TIM_CtrlPWMOutputs(TIM1, ENABLE);
-
-  /* Enable TIM1 DMA interface */
-  TIM_DMACmd(TIM1, TIM_DMA_Update, ENABLE);
-
-  /* Enable ADC1 */
-  ADC_Cmd(ADC1, ENABLE);
-
-  /* Enable ADC1 reset calibration register */
-  ADC_ResetCalibration(ADC1);
-  /* Check the end of ADC1 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC1));
-
-  /* Start ADC1 calibration */
-  ADC_StartCalibration(ADC1);
-  /* Check the end of ADC1 calibration */
-  while(ADC_GetCalibrationStatus(ADC1));
-
-  /* Start ADC1 conversion */ 
-  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-  /* ADCCLK = PCLK2/8 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div8);   
-
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 clock */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
-  /* Enable GPIOA, GPIOC, ADC1 and TIM1 Periph clock */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOC |
-                         RCC_APB2Periph_ADC1 | RCC_APB2Periph_TIM1, ENABLE);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Configure TIM1 Channel1 output */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-  GPIO_Init(GPIOA, &GPIO_InitStructure);
-
-  /* Configure ADC Channel14 as analog input */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4  ;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/main.c
deleted file mode 100644
index 379023d..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/main.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/FLASH_RAM/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup DMA_FLASH_RAM
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus;
-
-/* Private define ------------------------------------------------------------*/
-#define BufferSize  32
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-DMA_InitTypeDef  DMA_InitStructure;
-__IO uint32_t CurrDataCounterBegin = 0;
-__IO uint32_t CurrDataCounterEnd = 0x01; /* This variable should not be initialized to 0 */
-
-TestStatus TransferStatus = FAILED;
-const uint32_t SRC_Const_Buffer[BufferSize]= {
-                                    0x01020304,0x05060708,0x090A0B0C,0x0D0E0F10,
-                                    0x11121314,0x15161718,0x191A1B1C,0x1D1E1F20,
-                                    0x21222324,0x25262728,0x292A2B2C,0x2D2E2F30,
-                                    0x31323334,0x35363738,0x393A3B3C,0x3D3E3F40,
-                                    0x41424344,0x45464748,0x494A4B4C,0x4D4E4F50,
-                                    0x51525354,0x55565758,0x595A5B5C,0x5D5E5F60,
-                                    0x61626364,0x65666768,0x696A6B6C,0x6D6E6F70,
-                                    0x71727374,0x75767778,0x797A7B7C,0x7D7E7F80};
-uint32_t DST_Buffer[BufferSize];
-
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void NVIC_Configuration(void);
-TestStatus Buffercmp(const uint32_t* pBuffer, uint32_t* pBuffer1, uint16_t BufferLength);
-    
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief  Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System Clocks Configuration */
-  RCC_Configuration();
-       
-  /* NVIC configuration */
-  NVIC_Configuration();
-
-  /* DMA1 channel6 configuration */
-  DMA_DeInit(DMA1_Channel6);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)SRC_Const_Buffer;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)DST_Buffer;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = BufferSize;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Enable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Enable;
-  DMA_Init(DMA1_Channel6, &DMA_InitStructure);
-
-  /* Enable DMA1 Channel6 Transfer Complete interrupt */
-  DMA_ITConfig(DMA1_Channel6, DMA_IT_TC, ENABLE);
-
-  /* Get Current Data Counter value before transfer begins */
-  CurrDataCounterBegin = DMA_GetCurrDataCounter(DMA1_Channel6);
-
-  /* Enable DMA1 Channel6 transfer */
-  DMA_Cmd(DMA1_Channel6, ENABLE);
-
-  /* Wait the end of transmission */
-  while (CurrDataCounterEnd != 0)
-  {
-  }
-  
-  /* Check if the transmitted and received data are equal */
-  TransferStatus = Buffercmp(SRC_Const_Buffer, DST_Buffer, BufferSize);
-  /* TransferStatus = PASSED, if the transmitted and received data 
-     are the same */
-  /* TransferStatus = FAILED, if the transmitted and received data 
-     are different */
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 clock */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
-}
-
-/**
-  * @brief  Configure the nested vectored interrupt controller.
-  * @param  None
-  * @retval None
-  */
-void NVIC_Configuration(void)
-{
-  NVIC_InitTypeDef NVIC_InitStructure;
-  
-  /* Enable DMA1 channel6 IRQ Channel */
-  NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel6_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-}
-
-/**
-  * @brief  Compares two buffers.
-  * @param  pBuffer, pBuffer1: buffers to be compared.
-  * @param  BufferLength: buffer's length
-  * @retval PASSED: pBuffer identical to pBuffer1
-  *         FAILED: pBuffer differs from pBuffer1
-  */
-TestStatus Buffercmp(const uint32_t* pBuffer, uint32_t* pBuffer1, uint16_t BufferLength)
-{
-  while(BufferLength--)
-  {
-    if(*pBuffer != *pBuffer1)
-    {
-      return FAILED;
-    }
-    
-    pBuffer++;
-    pBuffer1++;
-  }
-
-  return PASSED;  
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/readme.txt
deleted file mode 100644
index caa5689..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/readme.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-/**
-  @page DMA_FLASH_RAM DMA FLASH to RAM example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    DMA/FLASH_RAM/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the DMA FLASH to RAM example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example provides a description of how to use a DMA channel to transfer 
-a word data buffer from FLASH memory to embedded SRAM memory.
-
-DMA1 Channel6 is configured to transfer the contents of a 32-word data buffer
-stored in Flash memory to the reception buffer declared in RAM.
-
-The start of transfer is triggered by software. DMA1 Channel6 memory-to-memory
-transfer is enabled. Source and destination addresses incrementing is also enabled.
-The transfer is started by setting the Channel enable bit for DMA1 Channel6.
-At the end of the transfer a Transfer Complete interrupt is generated since it
-is enabled. Once interrupt is generated, the remaining data to be transferred is
-read which must be equal to 0. The Transfer Complete Interrupt pending bit is
-then cleared. A comparison between the source and destination buffers is done to
-check that all data have been correctly transferred.
-
-
-@par Directory contents 
-
-  - DMA/FLASH_RAM/stm32f10x_conf.h    Library Configuration file
-  - DMA/FLASH_RAM/stm32f10x_it.c      Interrupt handlers
-  - DMA/FLASH_RAM/stm32f10x_it.h      Interrupt handlers header file
-  - DMA/FLASH_RAM/main.c              Main program
-  - DMA/FLASH_RAM/system_stm32f10x.c  STM32F10x system source file
-
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, 
-    XL-Density,High-Density Value line, Medium-Density Value line, Low-Density 
-    and Low-Density Value line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100B-EVAL (Medium-Density
-    Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density 
-    and XL-Density), STM32100E-EVAL (High-Density Value line) and STM3210B-EVAL 
-    (Medium-Density) evaluation boards and can be easily tailored to any other 
-    supported device and development board.
-
-
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-   
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/system_stm32f10x.c
deleted file mode 100644
index 8e7f882..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FLASH_RAM/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/FLASH_RAM/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
-/* #define SYSCLK_FREQ_56MHz  56000000 */
-#define SYSCLK_FREQ_72MHz  72000000
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/readme.txt
deleted file mode 100644
index d53bfe6..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/readme.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-/**
-  @page DMA_FSMC DMA FSMC example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    DMA/FSMC/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the DMA FSMC example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example provides a description of how to use two DMA channels to transfer
-a word data buffer from Flash memory to external SRAM memory and to recuperate
-the written data from external SRAM to be stored in internal SRAM.
-
-DMA2 Channel5 is configured to transfer, word by word, the contents of a 32-word data 
-buffer stored in Flash memory to the external SRAM memory interfaced by FSMC.
-The start of transfer is triggered by software. DMA2 Channel5 memory-to-memory
-transfer is enabled.
-Source and destination address incrementing is also enabled. The transfer is started
-by setting the Channel enable bit for DMA2 Channel5. A polling on the Transfer Complete
-flag is done to check the end of transfer. The DMA2 Channel5 Transfer complete flag
-is then cleared.
-
-DMA1 Channel3 is configured to transfer, byte by byte, the contents of the first
-128Bytes of external SRAM to the internal SRAM memory. The start of transfer is
-triggered by software. DMA1 Channel3 memory-to-memory transfer is enabled.
-Source and destination address incrementing is also enabled. The transfer is started
-by setting the Channel enable bit for DMA1 Channel3. A polling on the Transfer Complete
-flag is done to check the end of transfer.
-
-A comparison between the source and destination buffers is done to check that all data
-have been correctly transferred.
-
-
-@par Directory contents 
-
-  - DMA/FSMC/stm32f10x_conf.h     Library Configuration file
-  - DMA/FSMC/stm32f10x_it.c       Interrupt handlers
-  - DMA/FSMC/stm32f10x_it.h       Interrupt handlers header file
-  - DMA/FSMC/main.c               Main program  
-  - DMA/FSMC/system_stm32f10x.c   STM32F10x system source file
-  
-@par Hardware and Software environment 
-
-  - This example runs only on STM32F10x High-Density, High-Density Value line
-    and XL-Density Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density
-    Value line) and STM3210E-EVAL (High-Density and XL-Density) evaluation boards 
-    and can be easily tailored to any other supported device and development board.
-
-
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.   
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-      
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/stm32f10x_conf.h
deleted file mode 100644
index 119260e..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/FSMC/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/system_stm32f10x.c
deleted file mode 100644
index 2ac6698..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/FSMC/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/FSMC/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
-/* #define SYSCLK_FREQ_56MHz  56000000 */
-#define SYSCLK_FREQ_72MHz  72000000
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_conf.h
deleted file mode 100644
index 2926b30..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file DMA/I2C_RAM/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.c
deleted file mode 100644
index 9536c56..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/I2C_RAM/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup DMA_I2C_RAM
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.h
deleted file mode 100644
index 94c49d4..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/I2C_RAM/stm32f10x_it.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
-  ******************************************************************************
-  * @file DMA/I2C_RAM/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.c
deleted file mode 100644
index 758668e..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    DMA/SPI_RAM/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup DMA_SPI_RAM
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.h
deleted file mode 100644
index 2f4dfa4..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DMA/SPI_RAM/stm32f10x_it.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
-  ******************************************************************************
-  * @file DMA/SPI_RAM/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/