o Seemingly working Mutexes.

o Dropping the privileged/unprivileged split for now.

5 files changed, 0 insertions, 1671 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/link_offset.lnk b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/link_offset.lnk
deleted file mode 100644
index 2d9c35c..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210B-EVAL/link_offset.lnk
+++ /dev/null
@@ -1,4 +0,0 @@
--d"./settings/STM32F10x_offset.lsl"
---optimize=0
---map-file-format=2
-$(LinkObjects)
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/STM32F10x_offset.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/STM32F10x_offset.lsl
deleted file mode 100644
index 461cf60..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/HiTOP/STM3210C-EVAL/STM32F10x_offset.lsl
+++ /dev/null
@@ -1,174 +0,0 @@
-////////////////////////////////////////////////////////////////////////////
-//
-//  File        :  stm32f103_cmsis.lsl
-//
-//  Version     :  @(#)stm32f103_cmsis.lsl      1.2  09/06/04
-//
-//  Description :  LSL file for the STMicroelectronics STM32F103, CMSIS version
-//
-//  Copyright 2009 Altium BV     
-//
-//  NOTE:
-//      This file is derived from cm3.lsl and stm32f103.lsl.
-//      It is assumed that the user works with the ARMv7M architecture.
-//      Other architectures will not work with this lsl file.
-//
-////////////////////////////////////////////////////////////////////////////
-
-//
-// We do not want the vectors as defined in arm_arch.lsl
-//
-#define __NO_DEFAULT_AUTO_VECTORS       1
-#define __NR_OF_VECTORS                 83
-
-
-#ifndef __STACK
-#  define __STACK                       8k
-#endif
-#ifndef __HEAP
-#  define __HEAP                        2k
-#endif
-#ifndef __VECTOR_TABLE_ROM_ADDR
-#  define __VECTOR_TABLE_ROM_ADDR       0x08003000
-#endif
-#ifndef __XVWBUF
-#define __XVWBUF                        256             /* buffer used by CrossView */
-#endif
-
-#include <arm_arch.lsl>
-
-////////////////////////////////////////////////////////////////////////////
-//
-// In the STM32F10x, 3 different boot modes can be selected
-// - User Flash memory is selected as boot space
-// - SystemMemory is selected as boot space
-// - Embedded SRAM is selected as boot space
-//
-// This aliases the physical memory associated with each boot mode to Block
-// 000 (0x00000000 boot memory). Even when aliased in the boot memory space,
-// the related memory (Flash memory or SRAM) is still accessible at its
-// original memory space.
-//
-// If no memory is defined yet use the following memory settings
-//
-#ifndef __MEMORY
-
-memory stm32f103flash
-{
-    mau = 8;
-    type = rom;
-    size = 248k;
-    map ( size = 248k, dest_offset=0x08003000, dest=bus:ARM:local_bus);
-}
-
-memory stm32f103ram
-{
-    mau = 8;
-    type = ram;
-    size = 64k;
-    map ( size = 64k, dest_offset=0x20000000, dest=bus:ARM:local_bus);
-}
-
-#endif /* __MEMORY */
-
-section_layout ::linear
-{
-	group( contiguous )
-	{
-		select ".bss.stack";
-		select "stack";
-	}
-}
-
-
-//
-// Custom vector table defines interrupts according to CMSIS standard
-//
-# if defined(__CPU_ARMV7M__)
-section_setup ::linear
-{
-                // vector table with handler addresses
-                vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR,
-                                              template = ".text.handler_address",
-                                              template_symbol = "_lc_vector_handler",
-                                              vector_prefix = "_vector_",
-                                              fill = loop,
-                                              no_inline
-                                            )
-                {
-                        vector ( id = 0, fill = "_stacklabel" ); // FIXME: "_lc_ub_stack" does not work
-                        vector ( id = 1, fill = "_START" );
-                        vector ( id = 2, optional, fill = "NMI_Handler" );
-                        vector ( id = 3, optional, fill = "HardFault_Handler" );
-                        vector ( id = 4, optional, fill = "MemManage_Handler" );
-                        vector ( id = 5, optional, fill = "BusFault_Handler" );
-                        vector ( id = 6, optional, fill = "UsageFault_Handler" );
-                        vector ( id = 11, optional, fill = "SVC_Handler" );
-                        vector ( id = 12, optional, fill = "DebugMon_Handler" );
-                        vector ( id = 14, optional, fill = "PendSV_Handler" );
-                        vector ( id = 15, optional, fill = "SysTick_Handler" );
-
-                        // External Interrupts :
-                        vector ( id = 16, optional, fill = "WWDG_IRQHandler" );                 // Window Watchdog
-                        vector ( id = 17, optional, fill = "PVD_IRQHandler" );                  // PVD through EXTI Line detect
-                        vector ( id = 18, optional, fill = "TAMPER_IRQHandler" );               // Tamper
-                        vector ( id = 19, optional, fill = "RTC_IRQHandler" );                  // RTC
-                        vector ( id = 20, optional, fill = "FLASH_IRQHandler" );                // Flash
-                        vector ( id = 21, optional, fill = "RCC_IRQHandler" );                  // RCC
-                        vector ( id = 22, optional, fill = "EXTI0_IRQHandler" );                // EXTI Line 0
-                        vector ( id = 23, optional, fill = "EXTI1_IRQHandler" );                // EXTI Line 1
-                        vector ( id = 24, optional, fill = "EXTI2_IRQHandler" );                // EXTI Line 2
-                        vector ( id = 25, optional, fill = "EXTI3_IRQHandler" );                // EXTI Line 3
-                        vector ( id = 26, optional, fill = "EXTI4_IRQHandler" );                // EXTI Line 4
-                        vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" );          // DMA Channel 1
-                        vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" );          // DMA Channel 2
-                        vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" );          // DMA Channel 3
-                        vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" );          // DMA Channel 4
-                        vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" );          // DMA Channel 5
-                        vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" );          // DMA Channel 6
-                        vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" );          // DMA Channel 7
-                        vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" );               // ADC1 and ADC2
-                        vector ( id = 35, optional, fill = "CAN1_TX_IRQHandler" );              //  CAN1 TX
-                        vector ( id = 36, optional, fill = "CAN1_RX0_IRQHandler" );             // CAN1 RX0
-                        vector ( id = 37, optional, fill = "CAN1_RX1_IRQHandler" );              // CAN1 RX1
-                        vector ( id = 38, optional, fill = "CAN1_SCE_IRQHandler" );              // CAN1 SCE
-                        vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" );              // EXTI Line 9..5
-                        vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" );             // TIM1 Break
-                        vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" );              // TIM1 Update
-                        vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" );         // TIM1 Trigger and Commutation
-                        vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" );              // TIM1 Capture Compare
-                        vector ( id = 44, optional, fill = "TIM2_IRQHandler" );                 // TIM2
-                        vector ( id = 45, optional, fill = "TIM3_IRQHandler" );                 // TIM3
-                        vector ( id = 46, optional, fill = "TIM4_IRQHandler" );                 // TIM4
-                        vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" );              // I2C1 Event
-                        vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" );              // I2C1 Error
-                        vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" );              // I2C2 Event
-                        vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" );              // I2C2 Error
-                        vector ( id = 51, optional, fill = "SPI1_IRQHandler" );                 // SPI1
-                        vector ( id = 52, optional, fill = "SPI2_IRQHandler" );                 // SPI2
-                        vector ( id = 53, optional, fill = "USART1_IRQHandler" );               // USART1
-                        vector ( id = 54, optional, fill = "USART2_IRQHandler" );               // USART2
-                        vector ( id = 55, optional, fill = "USART3_IRQHandler" );               // USART3
-                        vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" );            // EXTI Line 15..10
-                        vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" );             // RTC Alarm through EXTI Line
-                        vector ( id = 58, optional, fill = "OTG_FS_WKUP_IRQHandler" );          // USB OTG FS Wakeup through EXTI line
-                        vector ( id = 66, optional, fill = "TIM5_IRQHandler" );                 // TIM5
-                        vector ( id = 67, optional, fill = "SPI3_IRQHandler" );                 // SPI3
-                        vector ( id = 68, optional, fill = "UART4_IRQHandler" );                // UART4
-                        vector ( id = 69, optional, fill = "UART5_IRQHandler" );                // UART5
-                        vector ( id = 70, optional, fill = "TIM6_IRQHandler" );                 // TIM6
-                        vector ( id = 71, optional, fill = "TIM7_IRQHandler" );                 // TIM7
-                        vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" );        // DMA2 Channel1
-                        vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" );        // DMA2 Channel2
-                        vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" );        // DMA2 Channel3
-                        vector ( id = 75, optional, fill = "DMA2_Channel4_IRQHandler" );      // DMA2 Channel4 
-			vector ( id = 76, optional, fill = "DMA2_Channel5_IRQHandler" );      // DMA2 Channel5 
-			vector ( id = 77, optional, fill = "ETH_IRQHandler" );                  // Ethernet
-			vector ( id = 78, optional, fill = "CAN2_TX_IRQHandler " );              // CAN2 TX
-			vector ( id = 79, optional, fill = "CAN2_RX0_IRQHandler" );              // CAN2 RX0
-			vector ( id = 80, optional, fill = "CAN2_RX1_IRQHandler" );              // CAN2 RX1
-			vector ( id = 81, optional, fill = "CAN2_SCE_IRQHandler" );              // CAN2 SCE
-			vector ( id = 82, optional, fill = "OTG_FS_IRQHandler" );                // USB OTG FS
-                }
-}
-# endif
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld
deleted file mode 100644
index fce0a32..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/linker/RIDE/stm32f10x_flash_offset.ld
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-Default linker script for STM32F10x_1024K_96K
-Copyright RAISONANCE S.A.S. 2008
-*/
-
-/* include the common STM32F10x sub-script */
-
-/* Common part of the linker scripts for STM32 devices*/
-
-
-/* default stack sizes. 
-
-These are used by the startup in order to allocate stacks for the different modes.
-*/
-
-__Stack_Size = 1024 ;
-
-PROVIDE ( _Stack_Size = __Stack_Size ) ;
-
-__Stack_Init = _estack  - __Stack_Size ;
-
-/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/
-PROVIDE ( _Stack_Init = __Stack_Init ) ;
-
-/*
-There will be a link error if there is not this amount of RAM free at the end.
-*/
-_Minimum_Stack_Size = 0x100 ;
-
-
-/* include the memory spaces definitions sub-script */
-/*
-Linker subscript for STM32F10x definitions with 1024K Flash and 96K RAM */
-
-/* Memory Spaces Definitions */
-
-MEMORY
-{
-  RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
-  FLASH (rx) : ORIGIN = 0x8003000, LENGTH = 1024K-0x3000
-  FLASHB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0
-  EXTMEMB0 (rx) : ORIGIN = 0x00000000, LENGTH = 0
-  EXTMEMB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0
-  EXTMEMB2 (rx) : ORIGIN = 0x00000000, LENGTH = 0
-  EXTMEMB3 (rx) : ORIGIN = 0x00000000, LENGTH = 0
-}
-
-/* higher address of the user mode stack */
-_estack = 0x20018000;
-
-
-
-/* include the sections management sub-script for FLASH mode */
-/*
-Common part of the linker scripts for STR71x devices in FLASH mode
-(that is, the FLASH is seen at 0)
-Copyright RAISONANCE 2005
-You can use, modify and distribute thisfile freely, but without any waranty.
-*/
-
-
-
-/* Sections Definitions */
-
-SECTIONS
-{
-    /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */
-    .isr_vector :
-    {
-	. = ALIGN(4);
-        KEEP(*(.isr_vector))            /* Startup code */
-	. = ALIGN(4);
-    } >FLASH
- 
-    /* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */
-    .flashtext :
-    {
-	. = ALIGN(4);
-        *(.flashtext)            /* Startup code */
-	. = ALIGN(4);
-    } >FLASH
- 
-    
-    /* the program code is stored in the .text section, which goes to Flash */
-    .text :
-    {
-	    . = ALIGN(4);
-	    
-        *(.text)                   /* remaining code */
-        *(.text.*)                   /* remaining code */
-        *(.rodata)                 /* read-only data (constants) */
-        *(.rodata*)
-        *(.glue_7)
-        *(.glue_7t)
-
-	    . = ALIGN(4);
-   	 _etext = .;
-	    /* This is used by the startup in order to initialize the .data secion */
-   	 _sidata = _etext;
-    } >FLASH
-    
- 
-
-    /* This is the initialized data section
-    The program executes knowing that the data is in the RAM
-    but the loader puts the initial values in the FLASH (inidata).
-    It is one task of the startup to copy the initial values from FLASH to RAM. */
-    .data  : AT ( _sidata )
-    {
-	    . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .data secion */
-        _sdata = . ;
-        
-        *(.data)
-        *(.data.*)
-
-	    . = ALIGN(4);
-	    /* This is used by the startup in order to initialize the .data secion */
-   	 _edata = . ;
-    } >RAM
-    
-    
-
-    /* This is the uninitialized data section */
-    .bss :
-    {
-	    . = ALIGN(4);
-        /* This is used by the startup in order to initialize the .bss secion */
-        _sbss = .;
-        
-        *(.bss)
-        *(COMMON)
-        
-	    . = ALIGN(4);
-	    /* This is used by the startup in order to initialize the .bss secion */
-   	 _ebss = . ;
-    } >RAM
-    
-    PROVIDE ( end = _ebss );
-    PROVIDE ( _end = _ebss );
-    
-    /* This is the user stack section 
-    This is just to check that there is enough RAM left for the User mode stack
-    It should generate an error if it's full.
-     */
-    ._usrstack :
-    {
-	    . = ALIGN(4);
-        _susrstack = . ;
-        
-        . = . + _Minimum_Stack_Size ;
-        
-	    . = ALIGN(4);
-        _eusrstack = . ;
-    } >RAM
-    
-
-   
-    /* this is the FLASH Bank1 */
-    /* the C or assembly source must explicitly place the code or data there
-    using the "section" attribute */
-    .b1text :
-    {
-        *(.b1text)                   /* remaining code */
-        *(.b1rodata)                 /* read-only data (constants) */
-        *(.b1rodata*)
-    } >FLASHB1
-    
-    /* this is the EXTMEM */
-    /* the C or assembly source must explicitly place the code or data there
-    using the "section" attribute */
-    
-    /* EXTMEM Bank0 */
-    .eb0text :
-    {
-        *(.eb0text)                   /* remaining code */
-        *(.eb0rodata)                 /* read-only data (constants) */
-        *(.eb0rodata*)
-    } >EXTMEMB0
-    
-    /* EXTMEM Bank1 */
-    .eb1text :
-    {
-        *(.eb1text)                   /* remaining code */
-        *(.eb1rodata)                 /* read-only data (constants) */
-        *(.eb1rodata*)
-    } >EXTMEMB1
-    
-    /* EXTMEM Bank2 */
-    .eb2text :
-    {
-        *(.eb2text)                   /* remaining code */
-        *(.eb2rodata)                 /* read-only data (constants) */
-        *(.eb2rodata*)
-    } >EXTMEMB2
-    
-    /* EXTMEM Bank0 */
-    .eb3text :
-    {
-        *(.eb3text)                   /* remaining code */
-        *(.eb3rodata)                 /* read-only data (constants) */
-        *(.eb3rodata*)
-    } >EXTMEMB3
-    
-    
-    
-    /* after that it's only debugging information. */
-    
-    /* remove the debugging information from the standard libraries */
-    DISCARD :
-    {
-     libc.a ( * )
-     libm.a ( * )
-     libgcc.a ( * )
-     }
-
-    /* Stabs debugging sections.  */
-    .stab          0 : { *(.stab) }
-    .stabstr       0 : { *(.stabstr) }
-    .stab.excl     0 : { *(.stab.excl) }
-    .stab.exclstr  0 : { *(.stab.exclstr) }
-    .stab.index    0 : { *(.stab.index) }
-    .stab.indexstr 0 : { *(.stab.indexstr) }
-    .comment       0 : { *(.comment) }
-    /* DWARF debug sections.
-       Symbols in the DWARF debugging sections are relative to the beginning
-       of the section so we begin them at 0.  */
-    /* DWARF 1 */
-    .debug          0 : { *(.debug) }
-    .line           0 : { *(.line) }
-    /* GNU DWARF 1 extensions */
-    .debug_srcinfo  0 : { *(.debug_srcinfo) }
-    .debug_sfnames  0 : { *(.debug_sfnames) }
-    /* DWARF 1.1 and DWARF 2 */
-    .debug_aranges  0 : { *(.debug_aranges) }
-    .debug_pubnames 0 : { *(.debug_pubnames) }
-    /* DWARF 2 */
-    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
-    .debug_abbrev   0 : { *(.debug_abbrev) }
-    .debug_line     0 : { *(.debug_line) }
-    .debug_frame    0 : { *(.debug_frame) }
-    .debug_str      0 : { *(.debug_str) }
-    .debug_loc      0 : { *(.debug_loc) }
-    .debug_macinfo  0 : { *(.debug_macinfo) }
-    /* SGI/MIPS DWARF 2 extensions */
-    .debug_weaknames 0 : { *(.debug_weaknames) }
-    .debug_funcnames 0 : { *(.debug_funcnames) }
-    .debug_typenames 0 : { *(.debug_typenames) }
-    .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/readme.txt
deleted file mode 100644
index ded8147..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/readme.txt
+++ /dev/null
@@ -1,149 +0,0 @@
-/**
-  @page NVIC_VectorTable_Relocation NVIC VectorTable Relocation example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    NVIC/VectorTable_Relocation/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the NVIC VectorTable Relocation example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example describes how to set the CortexM3 vector table in a specific 
-address other than default using the NVIC_SetVectorTable function from the 
-misc.h/.c driver.
-
-This can be used to build program which will be loaded into Flash memory by an
-application previously programmed from the Flash memory base address. 
-Such application can be In-Application Programming (IAP, through USART) or
-Device Firmware Upgrade (DFU, through USB).
-
-These applications are available for download from the ST microcontrollers 
-website: www.st.com/stm32
-
-The associated program implements a "Delay" function based on SysTick end of count
-interrupt, and toggles four leds with timing defined by the "Delay" function.
-
-When using the IAP to load your porgram, the vector table must be relocated at
-address 0x08003000.
-
-When using the DFU to load your porgram, the vector table must be relocated at
-address 0x08003000.
-
-@par Directory contents 
-
- - NVIC/VectorTable_Relocation/linker: modified linker to be used for this project 
- - NVIC/VectorTable_Relocation/stm32f10x_conf.h     Library Configuration file 
- - NVIC/VectorTable_Relocation/stm32f10x_it.c       Interrupt handlers 
- - NVIC/VectorTable_Relocation/stm32f10x_it.h       Interrupt handlers header file 
- - NVIC/VectorTable_Relocation/main.c               Main program 
- - NVIC/VectorTable_Relocation/main.h               Header for main.c 
- - NVIC/VectorTable_Relocation/system_stm32f10x.c   STM32F10x system source file
-
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, High-Density
-    Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density 
-    and Low-Density Value line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density
-    Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), 
-    STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) 
-    evaluation boards and can be easily tailored to any other supported device 
-    and development board.
-    To select the STMicroelectronics evaluation board used to run the example, 
-    uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
-
-  - STM32100E-EVAL Set-up 
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08
-      and PF.09 pins
-      
-  - STM32100B-EVAL Set-up   
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08
-      and PC.09 pins
-      
-  - STM3210C-EVAL Set-up 
-    - Use LED1, LED2, LED3 and LED4 leds connected respectively to PD.07, PD.13, PF.03
-      and PD.04 pins
-    
-  - STM3210E-EVAL Set-up 
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PF.06, PF0.7, PF.08
-      and PF.09 pins
-
-  - STM3210B-EVAL Set-up   
-    - Use LD1, LD2, LD3 and LD4 leds connected respectively to PC.06, PC.07, PC.08
-      and PC.09 pins
-     
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
-- Create a project and setup all project configuration:
-<ul>
-    <li> MDK-ARM 
-         - In the project option menu, select 'Target' window and enter 0x08003000 
-           as IROM start address
-         - In the project option menu, select 'Linker' window and enter 0x08003000 
-           as R/O base address                    
-
-    <li> EWARM
-         - Use "stm32f10x_flash_offset.icf" as linker file
-
-    <li> RIDE 
-         - In the Application options -> script menu, set "Use Default Script File" 
-           to "No" and use "stm32f10x_flash_offset.ld" as Script File. 
-           This linker is configured for STM32 XL-density devices. To use it with
-           other STM32 devices, this linker should be updated.
-    
-    <li> HiTOP 
-         - From linker\HiTOP\[target], copy the "link_offset" and "STM32F10x_offset.lsl"
-           to "Settings" folder.
-         - In project -> settings -> project -> tool settings ->linker 
-             use "link_offset.lnk" as linker file. 
-         - Add the "setstack.asm" to the workspace.
-         
-    <li> TrueSTUDIO 
-         - In the project properties window, select 'C/C++ Build'->settings node then 
-           the 'C Linker'->General node and use "stm32f10x_flash_offset.ld" as Script File.
-           This linker is configured for STM32 STM32F10x XL-density devices. To use it with
-           other STM32 devices, this linker should be updated. 
-         
-</ul>        
-- Copy all source files from this example folder to the template folder under
-  Project\STM32F10x_StdPeriph_Template
-      
-- In the main.c and linker files, the vector table is relocated at address 0x08003000.
-  You can modify this address depending on the requirement of your application.    
-- Rebuild all files 
-- Convert the program image to a binary file, *.bin, then you can download and
-  run it using the IAP or DFU application.
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-    
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/system_stm32f10x.c
deleted file mode 100644
index 09c7a1b..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/NVIC/VectorTable_Relocation/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    NVIC/VectorTable_Relocation/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
-/* #define SYSCLK_FREQ_56MHz  56000000 */
-#define SYSCLK_FREQ_72MHz  72000000
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x3000 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/