o Seemingly working Mutexes.

o Dropping the privileged/unprivileged split for now.

1 files changed, 0 insertions, 85 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/TIM10_PWMOutput/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/TIM10_PWMOutput/readme.txt
deleted file mode 100644
index 0282e23..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/TIM10_PWMOutput/readme.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-/**
-  @page TIM10_PWMOutput TIM10 PWM Output example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    TIM/TIM10_PWMOutput/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the  TIM10 PWM Output example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description
-
-This example shows how to configure the TIM10 peripheral in PWM (Pulse Width Modulation) 
-mode.
-
-The TIM10CLK frequency is set to SystemCoreClock (72 MHz), to get TIM10 counter
-clock at 24 MHz the Prescaler is computed as following:
-   - Prescaler = (TIM10CLK / TIM10 counter clock) - 1
-
-The TIM10 is running at 36 KHz: TIM10 Frequency = TIM10 counter clock/(ARR + 1)
-                                                = 24 MHz / 666 = 36 KHz
-The TIM10 CCR1 register value is equal to 500, so the TIM10 Channel 1 generates a 
-PWM signal with a frequency equal to 36 KHz and a duty cycle equal to 37.5%:
-TIM10 Channel1 duty cycle = (TIM10_CCR1/ TIM10_ARR + 1)* 100 = 37.5%
-
-The PWM waveform can be displayed using an oscilloscope.
-
-
-@par Directory contents 
-
-  - TIM/TIM10_PWMOutput/stm32f10x_conf.h    Library Configuration file
-  - TIM/TIM10_PWMOutput/stm32f10x_it.c      Interrupt handlers
-  - TIM/TIM10_PWMOutput/stm32f10x_it.h      Interrupt handlers header file
-  - TIM/TIM10_PWMOutput/main.c              Main program 
-  - TIM/TIM10_PWMOutput/system_stm32f10x.c  STM32F10x system source file
-
-@par Hardware and Software environment 
-
-  - This example runs only on STM32F10x XL-Density Devices.
-  
-  - This example has been tested with STMicroelectronics STM3210E-EVAL (XL-Density) 
-    evaluation board and can be easily tailored to any development board.    
-
-  - STM3210E-EVAL Set-up 
-    - Connect PF.06 (TIM10_CH1 remapped pin) to an oscilloscope to monitor the PWM waveform
-
-  
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes. 
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-   
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */