diff options
Diffstat (limited to 'thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf')
2 files changed, 189 insertions, 0 deletions
diff --git a/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt b/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt new file mode 100644 index 0000000..b0fd1fd --- /dev/null +++ b/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt @@ -0,0 +1,113 @@ +/** + @page USART_Printf USART Printf example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file USART/Printf/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the USART Printf example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example shows how to retarget the C library printf function to the USART. +This implementation output the printf message on the Hyperterminal using USARTx. +USARTx can be USART1 or USART2 depending on the EVAL board you are using. + +The USARTx is configured as follow: + - BaudRate = 115200 baud + - Word Length = 8 Bits + - One Stop Bit + - No parity + - Hardware flow control disabled (RTS and CTS signals) + - Receive and transmit enabled + + +@par Directory contents + + - USART/Printf/stm32f10x_conf.h Library Configuration file + - USART/Printf/stm32f10x_it.h Interrupt handlers header file + - USART/Printf/stm32f10x_it.c Interrupt handlers + - USART/Printf/main.c Main program + - USART/Printf/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + To select the STMicroelectronics evaluation board used to run the example, + uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL) + + - STM32100E-EVAL Set-up + - Connect a null-modem female/female RS232 cable between the DB9 connector + CN10 and PC serial port. + + - STM32100B-EVAL Set-up + - Connect a null-modem female/female RS232 cable between the DB9 connector + CN10 and PC serial port. + + - STM3210C-EVAL Set-up + - Connect a null-modem female/female RS232 cable between the DB9 connector + CN6 (USART2) and PC serial port. + @note Make sure that jumpers JP19 and JP18 are open. + + - STM3210E-EVAL Set-up + - Connect a null-modem female/female RS232 cable between the DB9 connector + CN12(when USART1 is used) and PC serial port. + + - STM3210B-EVAL Set-up + - Connect a null-modem female/female RS232 cable between the DB9 connector + CN6(when USART1 is used) and PC serial port. + + - Hyperterminal configuration: + - Word Length = 8 Bits + - One Stop Bit + - No parity + - BaudRate = 115200 baud + - flow control: None + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> + */ diff --git a/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/stm32f10x_conf.h b/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/stm32f10x_conf.h new file mode 100644 index 0000000..8e6a316 --- /dev/null +++ b/thirdparty/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/stm32f10x_conf.h @@ -0,0 +1,76 @@ +/** + ****************************************************************************** + * @file USART/Printf/stm32f10x_conf.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CONF_H +#define __STM32F10x_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ +#include "stm32f10x_adc.h" +#include "stm32f10x_bkp.h" +#include "stm32f10x_can.h" +#include "stm32f10x_cec.h" +#include "stm32f10x_crc.h" +#include "stm32f10x_dac.h" +#include "stm32f10x_dbgmcu.h" +#include "stm32f10x_dma.h" +#include "stm32f10x_exti.h" +#include "stm32f10x_flash.h" +#include "stm32f10x_fsmc.h" +#include "stm32f10x_gpio.h" +#include "stm32f10x_i2c.h" +#include "stm32f10x_iwdg.h" +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" +#include "stm32f10x_rtc.h" +#include "stm32f10x_sdio.h" +#include "stm32f10x_spi.h" +#include "stm32f10x_tim.h" +#include "stm32f10x_usart.h" +#include "stm32f10x_wwdg.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F10x_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |