diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc')
-rw-r--r-- | thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f30x_conf.h | 82 | ||||
-rw-r--r-- | thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_desc.h | 69 |
2 files changed, 151 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f30x_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f30x_conf.h new file mode 100644 index 0000000..e716105 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f30x_conf.h @@ -0,0 +1,82 @@ +/** + ****************************************************************************** + * @file stm32f30x_conf.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F30X_CONF_H +#define __STM32F30X_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Comment the line below to disable peripheral header file inclusion */ +#include "stm32f30x_adc.h" +#include "stm32f30x_can.h" +#include "stm32f30x_crc.h" +#include "stm32f30x_comp.h" +#include "stm32f30x_dac.h" +#include "stm32f30x_dbgmcu.h" +#include "stm32f30x_dma.h" +#include "stm32f30x_exti.h" +#include "stm32f30x_flash.h" +#include "stm32f30x_gpio.h" +#include "stm32f30x_syscfg.h" +#include "stm32f30x_i2c.h" +#include "stm32f30x_iwdg.h" +#include "stm32f30x_opamp.h" +#include "stm32f30x_pwr.h" +#include "stm32f30x_rcc.h" +#include "stm32f30x_rtc.h" +#include "stm32f30x_spi.h" +#include "stm32f30x_tim.h" +#include "stm32f30x_usart.h" +#include "stm32f30x_wwdg.h" +#include "stm32f30x_misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function which reports + * the name of the source file and the source line number of the call + * that failed. If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F30X_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_desc.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_desc.h new file mode 100644 index 0000000..e5381fe --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_desc.h @@ -0,0 +1,69 @@ +/** + ****************************************************************************** + * @file usb_desc.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Descriptor Header for Joystick Mouse Demo + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_DESC_H +#define __USB_DESC_H + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported define -----------------------------------------------------------*/ +#define USB_DEVICE_DESCRIPTOR_TYPE 0x01 +#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02 +#define USB_STRING_DESCRIPTOR_TYPE 0x03 +#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04 +#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05 + +#define HID_DESCRIPTOR_TYPE 0x21 +#define JOYSTICK_SIZ_HID_DESC 0x09 +#define JOYSTICK_OFF_HID_DESC 0x12 + +#define JOYSTICK_SIZ_DEVICE_DESC 18 +#define JOYSTICK_SIZ_CONFIG_DESC 34 +#define JOYSTICK_SIZ_REPORT_DESC 74 +#define JOYSTICK_SIZ_STRING_LANGID 4 +#define JOYSTICK_SIZ_STRING_VENDOR 38 +#define JOYSTICK_SIZ_STRING_PRODUCT 30 +#define JOYSTICK_SIZ_STRING_SERIAL 26 + +#define STANDARD_ENDPOINT_DESC_SIZE 0x09 + +/* Exported functions ------------------------------------------------------- */ +extern const uint8_t Joystick_DeviceDescriptor[JOYSTICK_SIZ_DEVICE_DESC]; +extern const uint8_t Joystick_ConfigDescriptor[JOYSTICK_SIZ_CONFIG_DESC]; +extern const uint8_t Joystick_ReportDescriptor[JOYSTICK_SIZ_REPORT_DESC]; +extern const uint8_t Joystick_StringLangID[JOYSTICK_SIZ_STRING_LANGID]; +extern const uint8_t Joystick_StringVendor[JOYSTICK_SIZ_STRING_VENDOR]; +extern const uint8_t Joystick_StringProduct[JOYSTICK_SIZ_STRING_PRODUCT]; +extern uint8_t Joystick_StringSerial[JOYSTICK_SIZ_STRING_SERIAL]; + +#endif /* __USB_DESC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |