diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage')
28 files changed, 6899 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/RIDE/MassStorageSimpleBuffer.rapp b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/RIDE/MassStorageSimpleBuffer.rapp new file mode 100644 index 0000000..0d0bb49 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/RIDE/MassStorageSimpleBuffer.rapp @@ -0,0 +1,1562 @@ + +<ApplicationBuild Header="MassStorageSimpleBuffer" Extern=".\MassStorageSimpleBuffer.rapp" Path=".\MassStorageSimpleBuffer.rapp" OutputFile=".\STM32303-EVAL\MassStorageSimpleBuffer.elf" Config="STM32303C_EVAL" sate="98" > + <Group Header="User" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\src\stm32_it.c" Header="stm32_it.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32_it.o" sate="0" /> + <NodeC Path="..\src\hw_config.c" Header="hw_config.c" Marker="-1" OutputFile=".\STM32303-EVAL\hw_config.o" sate="0" /> + <NodeC Path="..\src\main.c" Header="main.c" Marker="-1" OutputFile=".\STM32303-EVAL\main.o" sate="0" /> + <NodeC Path="..\src\usb_desc.c" Header="usb_desc.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_desc.o" sate="0" /> + <NodeC Path="..\src\usb_endp.c" Header="usb_endp.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_endp.o" sate="0" /> + <NodeC Path="..\src\usb_istr.c" Header="usb_istr.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_istr.o" sate="0" /> + <NodeC Path="..\src\usb_prop.c" Header="usb_prop.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_prop.o" sate="0" /> + <NodeC Path="..\src\usb_pwr.c" Header="usb_pwr.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_pwr.o" sate="0" /> + <NodeC Path="..\src\usb_scsi.c" Header="usb_scsi.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_scsi.o" sate="0" /> + <NodeC Path="..\src\fsmc_nand.c" Header="fsmc_nand.c" Marker="0" OutputFile=".\STM32303-EVAL\fsmc_nand.o" sate="0" > + <Options> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeC> + <NodeC Path="..\src\memory.c" Header="memory.c" Marker="-1" OutputFile=".\STM32303-EVAL\memory.o" sate="0" /> + <NodeC Path="..\src\nand_if.c" Header="nand_if.c" Marker="0" OutputFile=".\STM32303-EVAL\nand_if.o" sate="0" > + <Options> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeC> + <NodeC Path="..\src\scsi_data.c" Header="scsi_data.c" Marker="-1" OutputFile=".\STM32303-EVAL\scsi_data.o" sate="0" /> + <NodeC Path="..\src\usb_bot.c" Header="usb_bot.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_bot.o" sate="0" /> + <NodeC Path="..\src\mass_mal.c" Header="mass_mal.c" Marker="-1" OutputFile=".\STM32303-EVAL\mass_mal.o" sate="0" /> + + </Group> + <Configs> + <Config Header="STM3210E-EVAL" /> + <Config Header="STM3210B-EVAL" /> + <Config Header="STM3210E-EVAL_XL" /> + <Config Header="STM32L152-EVAL" /> + <Config Header="STM32L152D-EVAL" /> + <Config Header="STM32373C_EVAL" /> + <Config Header="STM32303C_EVAL" /> + + </Configs> + <Group Header="USB-FS-Device_Driver" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c" Header="usb_core.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_core.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c" Header="usb_init.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_init.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c" Header="usb_int.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_int.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c" Header="usb_mem.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_mem.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c" Header="usb_regs.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_regs.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c" Header="usb_sil.c" Marker="-1" OutputFile=".\STM32303-EVAL\usb_sil.o" sate="0" /> + + </Group> + <Group Header="Doc" Marker="-1" OutputFile="" sate="0" > + <NodeText Path="..\readme.txt" Header="readme.txt" Marker="-1" OutputFile="" sate="0" /> + + </Group> + <Group Header="STM32F10x" Marker="0" OutputFile="" sate="96" > + <Group Header="STM32F10X_StdPeriph_Driver" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c" Header="misc.c" Marker="-1" OutputFile=".\STM32303-EVAL\misc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c" Header="stm32f10x_adc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_adc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c" Header="stm32f10x_dma.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_dma.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c" Header="stm32f10x_exti.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_exti.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c" Header="stm32f10x_flash.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_flash.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c" Header="stm32f10x_gpio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_gpio.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c" Header="stm32f10x_i2c.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_i2c.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c" Header="stm32f10x_rcc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_rcc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c" Header="stm32f10x_usart.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_usart.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c" Header="stm32f10x_fsmc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_fsmc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c" Header="stm32f10x_spi.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_spi.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c" Header="stm32f10x_sdio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f10x_sdio.o" sate="0" /> + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="No" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </Group> + <Group Header="STM3210E-EVAL" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c" Header="stm3210e_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm3210e_eval.o" sate="0" /> + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval_sdio_sd.c" Header="stm3210e_eval_sdio_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm3210e_eval_sdio_sd.o" sate="0" /> + + </Group> + <Group Header="STM3210B-EVAL" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c" Header="stm3210b_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm3210b_eval.o" sate="0" /> + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval_spi_sd.c" Header="stm3210b_eval_spi_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm3210b_eval_spi_sd.o" sate="0" /> + + </Group> + <Group Header="CMSIS" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\src\system_stm32f10x.c" Header="system_stm32f10x.c" Marker="-1" OutputFile=".\STM32303-EVAL\system_stm32f10x.o" sate="0" > + <Options> </Options> + + </NodeC> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_hd.s" Header="startup_stm32f10x_hd.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_hd.o" sate="0" > + <Options> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_hd_vl.s" Header="startup_stm32f10x_hd_vl.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_hd_vl.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_ld.s" Header="startup_stm32f10x_ld.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_ld.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_ld_vl.s" Header="startup_stm32f10x_ld_vl.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_ld_vl.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_md.s" Header="startup_stm32f10x_md.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_md.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_md_vl.s" Header="startup_stm32f10x_md_vl.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_md_vl.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\gcc_ride7\startup_stm32f10x_xl.s" Header="startup_stm32f10x_xl.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f10x_xl.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + + </Group> + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </Group> + <Group Header="STM32L1xx" Marker="0" OutputFile="" sate="96" > + <Group Header="STM32L152-EVAL" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c" Header="stm32l152_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l152_eval.o" sate="0" /> + <Options> + <Config Header="STM32L152D-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval_spi_sd.c" Header="stm32l152_eval_spi_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l152_eval_spi_sd.o" sate="0" /> + + </Group> + <Group Header="STM32L152D-EVAL" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32L152D_EVAL\stm32l152d_eval.c" Header="stm32l152d_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l152d_eval.o" sate="0" /> + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32L152D_EVAL\stm32l152d_eval_sdio_sd.c" Header="stm32l152d_eval_sdio_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l152d_eval_sdio_sd.o" sate="0" /> + + </Group> + <Group Header="STM32L1xx_StdPeriph_Driver" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c" Header="stm32l1xx_spi.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_spi.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c" Header="stm32l1xx_syscfg.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_syscfg.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c" Header="stm32l1xx_usart.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_usart.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\misc.c" Header="misc.c" Marker="-1" OutputFile=".\STM32303-EVAL\misc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_adc.c" Header="stm32l1xx_adc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_adc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c" Header="stm32l1xx_dma.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_dma.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c" Header="stm32l1xx_exti.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_exti.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c" Header="stm32l1xx_flash.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_flash.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c" Header="stm32l1xx_gpio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_gpio.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c" Header="stm32l1xx_i2c.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_i2c.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c" Header="stm32l1xx_pwr.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_pwr.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c" Header="stm32l1xx_rcc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_rcc.o" sate="0" /> + <Options> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + <NodeC Path="..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_sdio.c" Header="stm32l1xx_sdio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32l1xx_sdio.o" sate="0" /> + + </Group> + <Group Header="CMSIS" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\src\system_stm32l1xx.c" Header="system_stm32l1xx.c" Marker="-1" OutputFile=".\STM32303-EVAL\system_stm32l1xx.o" sate="0" > + <Options> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="NodeC" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeC> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\gcc_ride7\startup_stm32l1xx_hd.s" Header="startup_stm32l1xx_hd.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32l1xx_hd.o" sate="0" > + <Options> + <Config Header="STM32L152-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\gcc_ride7\startup_stm32l1xx_md.s" Header="startup_stm32l1xx_md.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32l1xx_md.o" sate="0" > + <Options> + <Config Header="STM32L152D-EVAL" > + <Set Header="NodeASM" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </NodeASM> + + </Group> + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210C-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + <Property Header="LinkExclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </Group> + <Group Header="STM32F37x" Marker="0" OutputFile="" sate="96" > + <Group Header="CMSIS" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\src\system_stm32f37x.c" Header="system_stm32f37x.c" Marker="-1" OutputFile=".\STM32303-EVAL\system_stm32f37x.o" sate="0" /> + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F37x\Source\Templates\gcc_ride7\startup_stm32f37x.s" Header="startup_stm32f37x.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f37x.o" sate="0" /> + + </Group> + <Group Header="STM32373C_EVAL" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32373C_EVAL\stm32373c_eval.c" Header="stm32373c_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32373c_eval.o" sate="0" /> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32373C_EVAL\stm32373c_eval_spi_sd.c" Header="stm32373c_eval_spi_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32373c_eval_spi_sd.o" sate="0" /> + + </Group> + <Group Header="STM32F37x_StdPeriph_Driver" Marker="-1" OutputFile="" sate="0" > + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_syscfg.c" Header="stm32f37x_syscfg.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_syscfg.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_adc.c" Header="stm32f37x_adc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_adc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_dac.c" Header="stm32f37x_dac.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_dac.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_dma.c" Header="stm32f37x_dma.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_dma.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_exti.c" Header="stm32f37x_exti.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_exti.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_flash.c" Header="stm32f37x_flash.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_flash.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_gpio.c" Header="stm32f37x_gpio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_gpio.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_i2c.c" Header="stm32f37x_i2c.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_i2c.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_misc.c" Header="stm32f37x_misc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_misc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_pwr.c" Header="stm32f37x_pwr.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_pwr.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_rcc.c" Header="stm32f37x_rcc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_rcc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F37x_StdPeriph_Driver\src\stm32f37x_spi.c" Header="stm32f37x_spi.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f37x_spi.o" sate="0" /> + + </Group> + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </Group> + <Group Header="STM32F30x" Marker="-1" OutputFile="" sate="96" > + <Group Header="CMSIS" Marker="-1" OutputFile="" sate="96" > + <NodeASM Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F30x\Source\Templates\gcc_ride7\startup_stm32f30x.s" Header="startup_stm32f30x.s" Marker="-1" OutputFile=".\STM32303-EVAL\startup_stm32f30x.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\CMSIS\Device\ST\STM32F30x\Source\Templates\system_stm32f30x.c" Header="system_stm32f30x.c" Marker="-1" OutputFile=".\STM32303-EVAL\system_stm32f30x.o" sate="0" /> + + </Group> + <Group Header="STM32F30x_StdPeriph_Driver" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_syscfg.c" Header="stm32f30x_syscfg.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_syscfg.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_adc.c" Header="stm32f30x_adc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_adc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_dac.c" Header="stm32f30x_dac.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_dac.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_dma.c" Header="stm32f30x_dma.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_dma.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_exti.c" Header="stm32f30x_exti.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_exti.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_flash.c" Header="stm32f30x_flash.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_flash.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_gpio.c" Header="stm32f30x_gpio.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_gpio.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_i2c.c" Header="stm32f30x_i2c.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_i2c.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_misc.c" Header="stm32f30x_misc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_misc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_pwr.c" Header="stm32f30x_pwr.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_pwr.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_rcc.c" Header="stm32f30x_rcc.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_rcc.o" sate="0" /> + <NodeC Path="..\..\..\Libraries\STM32F30x_StdPeriph_Driver\src\stm32f30x_spi.c" Header="stm32f30x_spi.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32f30x_spi.o" sate="0" /> + + </Group> + <Group Header="STM32F303C_EVAL" Marker="-1" OutputFile="" sate="96" > + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32303C_EVAL\stm32303c_eval.c" Header="stm32303c_eval.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32303c_eval.o" sate="0" /> + <NodeC Path="..\..\..\Utilities\STM32_EVAL\STM32303C_EVAL\stm32303c_eval_spi_sd.c" Header="stm32303c_eval_spi_sd.c" Marker="-1" OutputFile=".\STM32303-EVAL\stm32303c_eval_spi_sd.o" sate="0" /> + + </Group> + <Options> + <Config Header="STM3210E-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="Group" > + <Section Header="Build" > + <Property Header="Exclude" Value="Yes" Removable="1" /> + + </Section> + + </Set> + + </Config> + + </Options> + + </Group> + <Options> + <Config Header="Standard" > + <Set Header="ApplicationBuild" > + <Section Header="General" > + <Property Header="TargetFamily" Value="ARM" /> + + </Section> + <Section Header="Directories" > + <Property Header="OutDir" Value="obj" Removable="1" /> + <Property Header="ListDir" Value="lst" Removable="1" /> + <Property Header="IncDir" Value="" Removable="1" /> + + </Section> + + </Set> + <Set Header="Target" > + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F103VBT6" /> + + </Section> + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\\GNU.config" Removable="1" /> + + </Section> + <Section Header="DebugARM" > + <Property Header="DebugTool" Value="RLINK_CORTEX" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="LIB" > + <Property Header="UART0PUTC" Value="0" Removable="1" /> + <Property Header="SMALLP" Value="0" Removable="1" /> + <Property Header="STLIB" Value="0" Removable="1" /> + + </Section> + + </Set> + <Set Header="AS" > + <Section Header="Options" > + <Property Header="Debug" Value="" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B_EVAL" > + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STM3210B_EVAL;VECT_TAB_FLASH" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E_EVAL" > + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STM3210E_EVAL;VECT_TAB_FLASH" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + <Section Header="LIB" > + <Property Header="SMALLP" Value="1" Removable="1" /> + + </Section> + + </Set> + <Set Header="Target" > + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F103ZET6" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL" > + <Set Header="Target" > + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F103ZET6" /> + + </Section> + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + <Property Header="SCRIPTFILES" Value="Yes" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="LIB" > + <Property Header="SMALLP" Value="1" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER;STM32F10X_HD;USE_STM3210E_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Include;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL" Removable="1" /> + <Property Header="OutDir" Value="$(ApplicationDir)\STM3210E-EVAL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM3210E-EVAL" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210B-EVAL" > + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="STM32F10X_MD;USE_STDPERIPH_DRIVER;USE_STM3210B_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + <Section Header="WARNINGS" > + <Property Header="CONSWARNINGS" Value="" Removable="1" /> + <Property Header="SWITCHWARNINGS" Value="" Removable="1" /> + <Property Header="SHADOWARNINGS" Value="" Removable="1" /> + <Property Header="UNUSEDWARNINGS" Value="" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + <Property Header="SCRIPTFILES" Value="Yes" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="LIB" > + <Property Header="SMALLP" Value="1" Removable="1" /> + + </Section> + + </Set> + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Include;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL" Removable="1" /> + <Property Header="OutDir" Value="$(ApplicationDir)\STM3210B-EVAL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM3210B-EVAL" Removable="1" /> + + </Section> + + </Set> + <Set Header="Target" > + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM3210E-EVAL_XL" > + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Include;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL" Removable="1" /> + <Property Header="OutDir" Value="$(ApplicationDir)\STM3210E-EVAL_XL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM3210E-EVAL_XL" Removable="1" /> + + </Section> + + </Set> + <Set Header="Target" > + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F103ZGT6" /> + + </Section> + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER;STM32F10X_HD;USE_STM3210E_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + <Property Header="SCRIPTFILES" Value="Yes" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32L152-EVAL" > + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="OutDir" Value="$(ApplicationDir)\STM32L152-EVAL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM32L152-EVAL" Removable="1" /> + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Include;..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL" Removable="1" /> + + </Section> + + </Set> + <Set Header="Target" > + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32L152VBT6" /> + + </Section> + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER; STM32L1XX_MD; USE_STM32L152_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Scripts" > + <Property Header="SCRIPTFILES" Value="Yes" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + + </Set> + </Config> + <Config Header="STM32L152D-EVAL" > + <Set Header="Target" > + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32L152ZD" /> + + </Section> + + </Set> + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM32L152D_EVAL;..\..\..\Libraries\CMSIS\Include" Removable="1" /> + <Property Header="OutDir" Value="STM32L152D_EVAL" Removable="1" /> + <Property Header="ListDir" Value="STM32L152D_EVAL" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER; STM32L1XX_HD; USE_STM32L152D_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="SCRIPTFILES" Value="Yes" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32373C_EVAL" > + <Set Header="Target" > + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F373xC" /> + + </Section> + + </Set> + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32F37x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F37x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM32373C_EVAL;..\..\..\Libraries\CMSIS\Include" Removable="1" /> + <Property Header="OutDir" Value="$(ApplicationDir)\STM32373-EVAL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM32373-EVAL" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER;STM32F37X;USE_STM32373C_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="File" Value="" Removable="1" /> + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32F373C_EVAL" > + <Set Header="Target" > + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + + </Set> + + </Config> + <Config Header="STM32303C_EVAL" > + <Set Header="Target" > + <Section Header="ToolSetARM" > + <Property Header="BuildToolSetARM" Value="ARM\GNU.config" /> + + </Section> + <Section Header="ProcessorARM" > + <Property Header="Processor" Value="STM32F303xC" /> + + </Section> + + </Set> + <Set Header="ApplicationBuild" > + <Section Header="Directories" > + <Property Header="OutDir" Value="$(ApplicationDir)\STM32303-EVAL" Removable="1" /> + <Property Header="ListDir" Value="$(ApplicationDir)\STM32303-EVAL" Removable="1" /> + <Property Header="IncDir" Value="..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32F30x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F30x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM32303C_EVAL;..\..\..\Libraries\CMSIS\Include" Removable="1" /> + + </Section> + + </Set> + <Set Header="GCC" > + <Section Header="Defines" > + <Property Header="Defines" Value="USE_STDPERIPH_DRIVER;STM32F30X;USE_STM32303C_EVAL" Removable="1" /> + + </Section> + <Section Header="OPTIMIZE" > + <Property Header="Optimize" Value="-Os" Removable="1" /> + + </Section> + + </Set> + <Set Header="LD" > + <Section Header="Startup" > + <Property Header="DEFAULTSTARTUP" Value="No" Removable="1" /> + <Property Header="File" Value="" Removable="1" /> + + </Section> + <Section Header="Scripts" > + <Property Header="StarterKitLimit" Value="No" Removable="1" /> + + </Section> + + </Set> + + </Config> + </Options> +</ApplicationBuild>
\ No newline at end of file diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl new file mode 100644 index 0000000..629bfcb --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl @@ -0,0 +1,165 @@ +//////////////////////////////////////////////////////////////////////////// +// +// File : stm32f103_cmsis.lsl +// +// Version : @(#)stm32f103_cmsis.lsl 1.2 09/06/04 +// +// Description : LSL file for the STMicroelectronics STM32F103, CMSIS version +// +// Copyright 2009 Altium BV +// +// NOTE: +// This file is derived from cm3.lsl and stm32f103.lsl. +// It is assumed that the user works with the ARMv7M architecture. +// Other architectures will not work with this lsl file. +// +//////////////////////////////////////////////////////////////////////////// + +// +// We do not want the vectors as defined in arm_arch.lsl +// +#define __NO_DEFAULT_AUTO_VECTORS 1 +#define __NR_OF_VECTORS 76 + + +#ifndef __STACK +# define __STACK 8k +#endif +#ifndef __HEAP +# define __HEAP 2k +#endif +#ifndef __VECTOR_TABLE_ROM_ADDR +# define __VECTOR_TABLE_ROM_ADDR 0x08000000 +#endif +#ifndef __XVWBUF +#define __XVWBUF 256 /* buffer used by CrossView */ +#endif + +#include <arm_arch.lsl> + +//////////////////////////////////////////////////////////////////////////// +// +// In the STM32F10x, 3 different boot modes can be selected +// - User Flash memory is selected as boot space +// - SystemMemory is selected as boot space +// - Embedded SRAM is selected as boot space +// +// This aliases the physical memory associated with each boot mode to Block +// 000 (0x00000000 boot memory). Even when aliased in the boot memory space, +// the related memory (Flash memory or SRAM) is still accessible at its +// original memory space. +// +// If no memory is defined yet use the following memory settings +// +#ifndef __MEMORY + +memory stm32f103flash +{ + mau = 8; + type = rom; + size = 512k; + map ( size = 512k, dest_offset=0x08000000, dest=bus:ARM:local_bus); +} + +memory stm32f103ram +{ + mau = 8; + type = ram; + size = 64k; + map ( size = 64k, dest_offset=0x20000000, dest=bus:ARM:local_bus); +} + +#endif /* __MEMORY */ + + +// +// Custom vector table defines interrupts according to CMSIS standard +// +# if defined(__CPU_ARMV7M__) +section_setup ::linear +{ + // vector table with handler addresses + vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR, + template = ".text.handler_address", + template_symbol = "_lc_vector_handler", + vector_prefix = "_vector_", + fill = loop, + no_inline + ) + { + vector ( id = 0, fill = "_lc_ub_stack" ); // Top of Stack + vector ( id = 1, fill = "Reset_Handler" ); /* Reset Handler */ + vector( id = 2, optional, fill = "NMI_Handler" ); /* 2 Non Maskable Interrupt */ + vector ( id = 3, optional, fill = "HardFault_Handler" ); + vector ( id = 4, optional, fill = "MemManage_Handler" ); + vector ( id = 5, optional, fill = "BusFault_Handler" ); + vector ( id = 6, optional, fill = "UsageFault_Handler" ); + vector ( id = 11, optional, fill = "SVC_Handler" ); + vector ( id = 12, optional, fill = "DebugMon_Handler" ); + vector ( id = 14, optional, fill = "PendSV_Handler" ); + vector ( id = 15, optional, fill = "SysTick_Handler" ); + + // External Interrupts : + vector ( id = 16, optional, fill = "WWDG_IRQHandler" ); // Window Watchdog + vector ( id = 17, optional, fill = "PVD_IRQHandler" ); // PVD through EXTI Line detect + vector ( id = 18, optional, fill = "TAMPER_IRQHandler" ); // Tamper + vector ( id = 19, optional, fill = "RTC_IRQHandler" ); // RTC + vector ( id = 20, optional, fill = "FLASH_IRQHandler" ); // Flash + vector ( id = 21, optional, fill = "RCC_IRQHandler" ); // RCC + vector ( id = 22, optional, fill = "EXTI0_IRQHandler" ); // EXTI Line 0 + vector ( id = 23, optional, fill = "EXTI1_IRQHandler" ); // EXTI Line 1 + vector ( id = 24, optional, fill = "EXTI2_IRQHandler" ); // EXTI Line 2 + vector ( id = 25, optional, fill = "EXTI3_IRQHandler" ); // EXTI Line 3 + vector ( id = 26, optional, fill = "EXTI4_IRQHandler" ); // EXTI Line 4 + vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" ); // DMA Channel 1 + vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" ); // DMA Channel 2 + vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" ); // DMA Channel 3 + vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" ); // DMA Channel 4 + vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" ); // DMA Channel 5 + vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" ); // DMA Channel 6 + vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" ); // DMA Channel 7 + vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" ); // ADC1 and ADC2 + vector ( id = 35, optional, fill = "USB_HP_CAN1_TX_IRQHandler" ); // USB High Priority or CAN1 TX + vector ( id = 36, optional, fill = "USB_LP_CAN1_RX0_IRQHandler" ); // USB LowPriority or CAN1 RX0 + vector ( id = 37, optional, fill = "CAN_RX1_IRQHandler" ); // CAN RX1 + vector ( id = 38, optional, fill = "CAN_SCE_IRQHandler" ); // CAN SCE + vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" ); // EXTI Line 9..5 + vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" ); // TIM1 Break + vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" ); // TIM1 Update + vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" ); // TIM1 Trigger and Commutation + vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" ); // TIM1 Capture Compare + vector ( id = 44, optional, fill = "TIM2_IRQHandler" ); // TIM2 + vector ( id = 45, optional, fill = "TIM3_IRQHandler" ); // TIM3 + vector ( id = 46, optional, fill = "TIM4_IRQHandler" ); // TIM4 + vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" ); // I2C1 Event + vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" ); // I2C1 Error + vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" ); // I2C2 Event + vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" ); // I2C2 Error + vector ( id = 51, optional, fill = "SPI1_IRQHandler" ); // SPI1 + vector ( id = 52, optional, fill = "SPI2_IRQHandler" ); // SPI2 + vector ( id = 53, optional, fill = "USART1_IRQHandler" ); // USART1 + vector ( id = 54, optional, fill = "USART2_IRQHandler" ); // USART2 + vector ( id = 55, optional, fill = "USART3_IRQHandler" ); // USART3 + vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" ); // EXTI Line 15..10 + vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" ); // RTC Alarm through EXTI Line + vector ( id = 58, optional, fill = "USBWakeUp_IRQHandler" ); // USB Wakeup from suspend + vector ( id = 59, optional, fill = "TIM8_BRK_IRQHandler" ); // TIM8 Break + vector ( id = 60, optional, fill = "TIM8_UP_IRQHandler" ); // TIM8 Update + vector ( id = 61, optional, fill = "TIM8_TRG_COM_IRQHandler" ); // TIM8 Trigger and Commutation + vector ( id = 62, optional, fill = "TIM8_CC_IRQHandler" ); // TIM8 Capture Compare + vector ( id = 63, optional, fill = "ADC3_IRQHandler" ); // ADC3 + vector ( id = 64, optional, fill = "FSMC_IRQHandler" ); // FSMC + vector ( id = 65, optional, fill = "SDIO_IRQHandler" ); // SDIO + vector ( id = 66, optional, fill = "TIM5_IRQHandler" ); // TIM5 + vector ( id = 67, optional, fill = "SPI3_IRQHandler" ); // SPI3 + vector ( id = 68, optional, fill = "UART4_IRQHandler" ); // UART4 + vector ( id = 69, optional, fill = "UART5_IRQHandler" ); // UART5 + vector ( id = 70, optional, fill = "TIM6_IRQHandler" ); // TIM6 + vector ( id = 71, optional, fill = "TIM7_IRQHandler" ); // TIM7 + vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" ); // DMA2 Channel1 + vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" ); // DMA2 Channel2 + vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" ); // DMA2 Channel3 + vector ( id = 75, optional, fill = "DMA2_Channel4_5_IRQHandler" ); // DMA2 Channel4 and DMA2 Channel5 + } +} +# endif diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.cproject new file mode 100644 index 0000000..5a42687 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.cproject @@ -0,0 +1,113 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.tasking.config.arm.abs.debug.2044455393"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.tasking.config.arm.abs.debug.2044455393" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings/> + <extensions> + <extension id="com.tasking.managedbuilder.TASKING_ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="com.tasking.managedbuilder.TskRegexErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="abs" artifactName="STM32373C_EVAL" buildArtefactType="com.tasking.arm.buildArtefactType.elf" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=com.tasking.arm.buildArtefactType.elf" cleanCommand=""${PRODDIR}/bin/rm" -rf" description="" id="com.tasking.config.arm.abs.debug.2044455393" name="Debug" parent="com.tasking.config.arm.abs.debug"> + <folderInfo id="com.tasking.config.arm.abs.debug.2044455393." name="/" resourcePath=""> + <toolChain id="com.tasking.arm.abs.debug.315882766" name="TASKING VX-toolset for ARM" superClass="com.tasking.arm.abs.debug"> + <option id="com.tasking.arm.pluginVersion.306560835" name="Plugin version" superClass="com.tasking.arm.pluginVersion" value="1.88.0.0" valueType="string"/> + <option id="com.tasking.arm.prodDir.527888595" name="Product directory:" superClass="com.tasking.arm.prodDir" value="${eclipse_home}/.." valueType="string"/> + <option id="com.tasking.arm.cpu.1659227005" name="Processor:" superClass="com.tasking.arm.cpu" value="stm32f373vc" valueType="string"/> + <option id="com.tasking.arm.globalOptions.endianness.847552914" name="Endianness:" superClass="com.tasking.arm.globalOptions.endianness" value="com.tasking.arm.globalOptions.endianness.little" valueType="enumerated"/> + <targetPlatform archList="all" binaryParser="com.tasking.managedbuilder.TASKING_ELF" id="com.tasking.arm.platform.abs.debug.2077143327" name="Debug" osList="" superClass="com.tasking.arm.platform.abs.debug"/> + <builder buildPath="${workspace_loc:/STM3210B-EVAL/Debug}" id="com.tasking.arm.builder.abs.debug.1207760117" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="TASKING ARM Makefile generator" parallelBuildOn="true" parallelizationNumber="-1" superClass="com.tasking.arm.builder.abs.debug"/> + <tool id="com.tasking.arm.cc.abs.debug.1657066278" name="C/C++ Compiler" superClass="com.tasking.arm.cc.abs.debug"> + <option id="com.tasking.arm.cc.pr36858.1629322841" name="workaround for PR36858" superClass="com.tasking.arm.cc.pr36858" value="true" valueType="string"/> + <option id="com.tasking.arm.cc.includePaths.449008655" name="Include paths" superClass="com.tasking.arm.cc.includePaths" valueType="includePath"> + <listOptionValue builtIn="false" value="..\..\.\..\inc"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Libraries\CMSIS\Device\ST\STM32F37x\Include"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Libraries\STM32F37x_StdPeriph_Driver\inc"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Utilities\STM32_EVAL"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Utilities\STM32_EVAL\Common"/> + <listOptionValue builtIn="false" value="..\..\.\..\..\..\Utilities\STM32_EVAL\STM32373C_EVAL"/> + </option> + <option id="com.tasking.arm.cc.definedSymbols.2139466164" name="Defined symbols" superClass="com.tasking.arm.cc.definedSymbols" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + <listOptionValue builtIn="false" value="STM32F37X"/> + <listOptionValue builtIn="false" value="USE_STM32373C_EVAL"/> + </option> + <option id="com.tasking.arm.cc.optimize.1365289574" name="Optimization level:" superClass="com.tasking.arm.cc.optimize" value="com.tasking.arm.cc.optimize.3" valueType="enumerated"/> + <option id="com.tasking.arm.cc.tradeoff.1958267302" name="Trade-off between speed and size:" superClass="com.tasking.arm.cc.tradeoff" value="com.tasking.arm.cc.tradeoff.4" valueType="enumerated"/> + <option id="com.tasking.arm.cc.globalTypeChecking.1184544748" name="Perform global type checking on C code" superClass="com.tasking.arm.cc.globalTypeChecking" value="false" valueType="boolean"/> + <option id="com.tasking.arm.cc.nowarning.398961799" name="Suppress C compiler warnings" superClass="com.tasking.arm.cc.nowarning" valueType="stringList"> + <listOptionValue builtIn="false" value="588"/> + <listOptionValue builtIn="false" value="529"/> + <listOptionValue builtIn="false" value="549"/> + <listOptionValue builtIn="false" value="557"/> + <listOptionValue builtIn="false" value="508"/> + <listOptionValue builtIn="false" value="560"/> + </option> + <option id="com.tasking.arm.cc.defaultHeaderFile.1126538551" name="Include CMSIS device register definition header file" superClass="com.tasking.arm.cc.defaultHeaderFile" value="true" valueType="boolean"/> + <option id="com.tasking.arm.cc.cmsisIncludePaths.1232400927" name="Add CMSIS include paths" superClass="com.tasking.arm.cc.cmsisIncludePaths" value="true" valueType="boolean"/> + <option id="com.tasking.arm.cc.codeGeneration.useFpu.1037423562" name="Use FPU" superClass="com.tasking.arm.cc.codeGeneration.useFpu" value="false" valueType="boolean"/> + <option id="com.tasking.arm.cc.additionalOptions.2089822954" name="Additional options:" superClass="com.tasking.arm.cc.additionalOptions" value="" valueType="string"/> + <option id="com.tasking.arm.cc.codeGeneration.Thumb.51606921" name="Use Thumb instruction set" superClass="com.tasking.arm.cc.codeGeneration.Thumb" value="true" valueType="boolean"/> + <inputType id="com.tasking.arm.cppInputType.78394475" name="C++" superClass="com.tasking.arm.cppInputType"/> + <inputType id="com.tasking.arm.cpp.cInputType.609856589" name="C" superClass="com.tasking.arm.cpp.cInputType"/> + <inputType id="com.tasking.arm.cc.msInputType.765887363" name="MS" superClass="com.tasking.arm.cc.msInputType"/> + </tool> + <tool id="com.tasking.arm.as.abs.debug.1696826359" name="Assembler" superClass="com.tasking.arm.as.abs.debug"> + <option id="com.tasking.arm.as.nowarnings.1345499014" name="Suppress all warnings" superClass="com.tasking.arm.as.nowarnings" value="false" valueType="boolean"/> + <option id="com.tasking.arm.as.definedSymbols.1925183717" name="Defined symbols" superClass="com.tasking.arm.as.definedSymbols"/> + <option id="com.tasking.arm.as.includePaths.762676103" name="Include paths" superClass="com.tasking.arm.as.includePaths"/> + <option id="com.tasking.arm.as.additionalOptions.1602992317" name="Additional options:" superClass="com.tasking.arm.as.additionalOptions" value="" valueType="string"/> + <inputType id="com.tasking.arm.asmInputType.1662245119" name="ASM" superClass="com.tasking.arm.asmInputType"/> + </tool> + <tool id="com.tasking.arm.lk.abs.debug.666839530" name="Linker" superClass="com.tasking.arm.lk.abs.debug"> + <option id="com.tasking.arm.lk.lslFile.578724675" name="Linker script file:" superClass="com.tasking.arm.lk.lslFile" value="../TASKING/stm32f37x.lsl" valueType="string"/> + <option id="com.tasking.arm.lk.library.1866270609" name="Libraries" superClass="com.tasking.arm.lk.library"/> + <option id="com.tasking.arm.lk.libraryDirectory.122337355" name="Library search path" superClass="com.tasking.arm.lk.libraryDirectory"/> + <option id="com.tasking.arm.lk.additionalOptions.2095335915" name="Additional options:" superClass="com.tasking.arm.lk.additionalOptions" value="" valueType="string"/> + <inputType id="com.tasking.arm.lkObjInputType.1921927729" name="OBJ" superClass="com.tasking.arm.lkObjInputType"/> + <inputType id="com.tasking.arm.lkLibInputType.1525417255" name="LIB" superClass="com.tasking.arm.lkLibInputType"/> + </tool> + </toolChain> + </folderInfo> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="com.tasking.toolInfo"> + <toolInfo>TASKING VX-toolset for ARM Cortex: object linker (TRIAL VERS v4.3r1 Build 142</toolInfo> + <toolInfo>TASKING program builder v4.3r1 Build 068</toolInfo> + <toolInfo>TASKING VX-toolset for ARM Cortex: assembler v4.3r1 Build 148</toolInfo> + <toolInfo>TASKING VX-toolset for ARM Cortex: control program v4.3r1 Build 120</toolInfo> + <toolInfo>TASKING VX-toolset for ARM Cortex: C compiler (TRIAL VERSION v4.3r1 Build 683</toolInfo> + </storageModule> + <storageModule addStartupFiles="false" moduleId="com.tasking.processor" updateRefProjects="true"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM3210B-EVAL.com.tasking.arm.target.abs.491846486" name="TASKING ARM Application" projectType="com.tasking.arm.target.abs"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <scannerConfigBuildInfo instanceId="com.tasking.config.arm.abs.release.1258418627;com.tasking.config.arm.abs.release.1258418627."> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.tasking.arm.TskARMScannerInfo"/> + </scannerConfigBuildInfo> + <scannerConfigBuildInfo instanceId="com.tasking.config.arm.abs.debug.2044455393;com.tasking.config.arm.abs.debug.2044455393."> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="com.tasking.arm.TskARMScannerInfo"/> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"> + <project-mappings> + <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cHeader" language="com.tasking.arm.clanguage"/> + <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cSource" language="com.tasking.arm.clanguage"/> + <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxHeader" language="com.tasking.arm.cpplanguage"/> + <content-type-mapping configuration="" content-type="org.eclipse.cdt.core.cxxSource" language="com.tasking.arm.cpplanguage"/> + </project-mappings> + </storageModule> + <storageModule moduleId="refreshScope" versionNumber="1"> + <resource resourceType="PROJECT" workspacePath="/STM3210B-EVAL"/> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.project new file mode 100644 index 0000000..aa1839c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/.project @@ -0,0 +1,227 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>STM32373C_EVAL</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>com.tasking.arm.TskManagedBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + <nature>com.tasking.arm.target</nature> + </natures> + <linkedResources> + <link> + <name>Doc</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>STM32F37x</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>User</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>Doc/readme.txt</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/readme.txt</locationURI> + </link> + <link> + <name>STM32F37x/CMSIS</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>STM32F37x/STM32373C_EVAL</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver</name> + <type>2</type> + <locationURI>PARENT-1-PROJECT_LOC/.metadata/Link</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_core.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_init.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_int.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_mem.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_regs.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_sil.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c</locationURI> + </link> + <link> + <name>User/hw_config.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/hw_config.c</locationURI> + </link> + <link> + <name>User/main.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/main.c</locationURI> + </link> + <link> + <name>User/mass_mal.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/mass_mal.c</locationURI> + </link> + <link> + <name>User/memory.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/memory.c</locationURI> + </link> + <link> + <name>User/scsi_data.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/scsi_data.c</locationURI> + </link> + <link> + <name>User/stm32_it.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/stm32_it.c</locationURI> + </link> + <link> + <name>User/usb_bot.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_bot.c</locationURI> + </link> + <link> + <name>User/usb_desc.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_desc.c</locationURI> + </link> + <link> + <name>User/usb_endp.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_endp.c</locationURI> + </link> + <link> + <name>User/usb_istr.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_istr.c</locationURI> + </link> + <link> + <name>User/usb_prop.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_prop.c</locationURI> + </link> + <link> + <name>User/usb_pwr.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_pwr.c</locationURI> + </link> + <link> + <name>User/usb_scsi.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/usb_scsi.c</locationURI> + </link> + <link> + <name>STM32F37x/CMSIS/system_stm32f37x.c</name> + <type>1</type> + <locationURI>PARENT-2-PROJECT_LOC/src/system_stm32f37x.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32373C_EVAL/stm32373c_eval.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM32373C_EVAL/stm32373c_eval.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32373C_EVAL/stm32373c_eval_spi_sd.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM32373C_EVAL/stm32373c_eval_spi_sd.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_dma.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_dma.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_exti.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_exti.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_flash.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_flash.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_gpio.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_gpio.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_i2c.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_i2c.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_misc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_misc.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_pwr.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_pwr.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_rcc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_rcc.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_spi.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_spi.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_syscfg.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_syscfg.c</locationURI> + </link> + <link> + <name>STM32F37x/STM32F37x_StdPeriph_Driver/stm32f37x_usart.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F37x_StdPeriph_Driver/src/stm32f37x_usart.c</locationURI> + </link> + </linkedResources> +</projectDescription> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/STM32373C_EVAL.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/STM32373C_EVAL.launch new file mode 100644 index 0000000..6c766c6 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/STM32373C_EVAL.launch @@ -0,0 +1,41 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="com.tasking.cdt.launch.localCLaunch"> +<booleanAttribute key="com.tasking.debug.cdt.core.BREAK_ON_EXIT" value="true"/> +<booleanAttribute key="com.tasking.debug.cdt.core.CACHE_TARGET_ACCESS" value="false"/> +<stringAttribute key="com.tasking.debug.cdt.core.COMMUNICATION" value="ST-LINK over USB (JTAG)"/> +<stringAttribute key="com.tasking.debug.cdt.core.CONFIGURATION" value="Default"/> +<stringAttribute key="com.tasking.debug.cdt.core.DILOGCALLBACK_LOG_FILE_NAME" value=""/> +<booleanAttribute key="com.tasking.debug.cdt.core.DOWNLOAD" value="true"/> +<stringAttribute key="com.tasking.debug.cdt.core.FSS_ROOT" value="${project_loc}\${build_config}"/> +<stringAttribute key="com.tasking.debug.cdt.core.GDILOG_FILE_NAME" value=""/> +<booleanAttribute key="com.tasking.debug.cdt.core.GOTO_MAIN" value="true"/> +<stringAttribute key="com.tasking.debug.cdt.core.MSGLOG_FILE_NAME" value=""/> +<booleanAttribute key="com.tasking.debug.cdt.core.RESET_TARGET" value="true"/> +<stringAttribute key="com.tasking.debug.cdt.core.TARGET" value="STMicroelectronics STM32373C-Eval board"/> +<booleanAttribute key="com.tasking.debug.cdt.core.USE_MDF_FILE" value="false"/> +<booleanAttribute key="com.tasking.debug.cdt.core.VERIFY" value="true"/> +<booleanAttribute key="com.tasking.debug.cdt.core.linkToProject" value="true"/> +<stringAttribute key="debugger_configuration.debug_instrument_module" value="distlink"/> +<stringAttribute key="debugger_configuration.gdi.flash.flash_monitor" value="fstm32f10x.sre"/> +<stringAttribute key="debugger_configuration.gdi.flash.flash_workspace" value="0x20000000"/> +<stringAttribute key="debugger_configuration.gdi.resource.hwdiarm.protocol" value="JTAG"/> +<stringAttribute key="debugger_configuration.general.kdi_orti_file" value=""/> +<stringAttribute key="debugger_configuration.general.ksm_sharedlib" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.tasking.debug.cdt.core.CDebugger"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/> +<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="true"/> +<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/> +<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="${project_loc}\${build_config}\STM32373C_EVAL.abs"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="STM32373C_EVAL"/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/STM32373C_EVAL"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +</launchConfiguration> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/TASKING/stm32f37x.lsl b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/TASKING/stm32f37x.lsl new file mode 100644 index 0000000..d8ba5b5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TASKING/STM32373C_EVAL/TASKING/stm32f37x.lsl @@ -0,0 +1,200 @@ +//////////////////////////////////////////////////////////////////////////// +// +// File : stm32f37x.lsl +// +// Version : @(#)stm32f37x.lsl 1.1 12/07/27 +// +// Description : LSL file for the STMicroelectronics STM32F37x +// +// Copyright 2012 Altium BV +// +// Macros specific to control this LSL file +// +// __MEMORY Define this macro to suppress definition of on-chip +// memory. Must be defined when you want to define on-chip +// in your project's LSL file. +// __FLASH_SIZE Specifies the size of flash memory to be allocated +// __SRAM_SIZE Specifies the size of the SRAM memory to be allocated +// __NO_DEFAULT_AUTO_VECTORS +// When enabled the interrupt vector table will not be +// generated +// __VECTOR_TABLE_RAM_COPY +// Define this macro to enable copying the vector table +// at startup from ROM to RAM. +// __VECTOR_TABLE_ROM_ADDR +// Specify the vector table address in ROM +// __VECTOR_TABLE_RAM_ADDR +// Specify the vector table address in RAM when the the +// it is copied from ROM to RAM (__VECTOR_TABLE_RAM_COPY) +// +// See arm_arch.lsl for more available macros. +// +// Notes: +// In the STM32F37x, 3 different boot modes can be selected +// - User Flash memory is selected as boot space +// - SystemMemory is selected as boot space +// - Embedded SRAM is selected as boot space +// +// This aliases the physical memory associated with each boot mode to Block +// 000 (0x00000000 boot memory). Even when aliased in the boot memory space, +// the related memory (Flash memory or SRAM) is still accessible at its +// original memory space. +// +//////////////////////////////////////////////////////////////////////////// + +#ifndef __NO_DEFAULT_AUTO_VECTORS +// Suppress the vectors as defined arm_arch.lsl, because we define our +// own vectors for CMSIS +#define __CMSIS_VECTORS 1 +#define __NO_DEFAULT_AUTO_VECTORS 1 +#define __NR_OF_VECTORS 98 +#endif + +#ifndef __VECTOR_TABLE_ROM_ADDR +# define __VECTOR_TABLE_ROM_ADDR 0x08000000 +#endif + +#ifndef __VECTOR_TABLE_RAM_ADDR +# define __VECTOR_TABLE_RAM_ADDR 0x20000000 +#endif + + +#ifndef __STACK +# define __STACK 4k +#endif + +#ifndef __HEAP +# define __HEAP 2k +#endif + +#include <arm_arch.lsl> + +// +// If no memory is defined yet use the following memory settings +// +#ifndef __MEMORY + +// Specify default size for Flash and SRAM +#ifndef __FLASH_SIZE +# define __FLASH_SIZE 256k +#endif +#ifndef __SRAM_SIZE +# define __SRAM_SIZE 32k +#endif + +memory STM32F37x_Flash +{ + mau = 8; + type = rom; + size = __FLASH_SIZE; + map ( size = __FLASH_SIZE, dest_offset=0x08000000, dest=bus:ARM:local_bus); +} + +memory STM32F37x_SRAM +{ + mau = 8; + type = ram; + size = __SRAM_SIZE; + priority = 2; + map ( size = __SRAM_SIZE, dest_offset=0x20000000, dest=bus:ARM:local_bus); +} + +#endif /* __MEMORY */ + + +// +// Define the vector table for CMSIS +// +#ifdef __CMSIS_VECTORS +section_setup ::linear +{ + // vector table with handler addresses + vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_RUN_ADDR, + template = ".text.handler_address", + template_symbol = "_lc_vector_handler", + vector_prefix = "_vector_", + __VECTOR_TABLE_COPY_ATTRIBUTE + fill = loop, + no_inline + ) + { + vector ( id = 0, fill = "_lc_ub_stack" ); // Top of Stack + vector ( id = 1, fill = "Reset_Handler" ); // Reset Handler + vector ( id = 2, optional, fill = "NMI_Handler" ); // NMI Handler + vector ( id = 3, optional, fill = "HardFault_Handler" ); // Hard Fault Handler + vector ( id = 4, optional, fill = "MemManage_Handler" ); // MPU Fault Handler + vector ( id = 5, optional, fill = "BusFault_Handler" ); // Bus Fault Handler + vector ( id = 6, optional, fill = "UsageFault_Handler" ); // Usage Fault Handler + vector ( id = 11, optional, fill = "SVC_Handler" ); // SVCall Handler + vector ( id = 12, optional, fill = "DebugMon_Handler" ); // Debug Monitor Handler + vector ( id = 14, optional, fill = "PendSV_Handler" ); // PendSV Handler + vector ( id = 15, optional, fill = "SysTick_Handler" ); // SysTick Handler + + // External Interrupts : + vector ( id = 16, optional, fill = "WWDG_IRQHandler" ); // Window Watchdog + vector ( id = 17, optional, fill = "PVD_IRQHandler" ); // PVD through EXTI Line detect + vector ( id = 18, optional, fill = "TAMPER_STAMP_IRQHandler" ); // Tamper amd TimeStanp through EXTI + vector ( id = 19, optional, fill = "RTC_WKUP_IRQHandler" ); // RTC Wakeup through the EXTI line + vector ( id = 20, optional, fill = "FLASH_IRQHandler" ); // Flash global interrupt + vector ( id = 21, optional, fill = "RCC_IRQHandler" ); // RCC global interrupt + vector ( id = 22, optional, fill = "EXTI0_IRQHandler" ); // EXTI Line 0 interrupt + vector ( id = 23, optional, fill = "EXTI1_IRQHandler" ); // EXTI Line 1 interrupt + vector ( id = 24, optional, fill = "EXTI2_TS_IRQHandler" ); // EXTI2_TS_IRQHandler interrupt + vector ( id = 25, optional, fill = "EXTI3_IRQHandler" ); // EXTI Line 3 interrupt + vector ( id = 26, optional, fill = "EXTI4_IRQHandler" ); // EXTI Line 4 interrupt + vector ( id = 27, optional, fill = "DMA1_Channel1_IRQHandler" ); // DMA1 Channel 1 global interrupt + vector ( id = 28, optional, fill = "DMA1_Channel2_IRQHandler" ); // DMA1 Channel 2 global interrupt + vector ( id = 29, optional, fill = "DMA1_Channel3_IRQHandler" ); // DMA1 Channel 3 global interrupt + vector ( id = 30, optional, fill = "DMA1_Channel4_IRQHandler" ); // DMA1 Channel 4 global interrupt + vector ( id = 31, optional, fill = "DMA1_Channel5_IRQHandler" ); // DMA1 Channel 5 global interrupt + vector ( id = 32, optional, fill = "DMA1_Channel6_IRQHandler" ); // DMA1 Channel 6 global interrupt + vector ( id = 33, optional, fill = "DMA1_Channel7_IRQHandler" ); // DMA1 Channel 7 global interrupt + vector ( id = 34, optional, fill = "ADC1_IRQHandler" ); // ADC1 interrupts + vector ( id = 35, optional, fill = "CAN1_TX_IRQHandler" ); // CAN1 TX interrupts + vector ( id = 36, optional, fill = "CAN1_RX0_IRQHandler" ); // CAN1 RX0 interrupts + vector ( id = 37, optional, fill = "CAN1_RX1_IRQHandler" ); // CAN1 RX1 interrupt + vector ( id = 38, optional, fill = "CAN1_SCE_IRQHandler" ); // CAN1 SCE interrupt + vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" ); // EXTI Line 9..5 interrupts + vector ( id = 40, optional, fill = "TIM15_IRQHandler" ); // TIM15 global interrupt + vector ( id = 41, optional, fill = "TIM16_IRQHandler" ); // TIM16 global interrupt + vector ( id = 42, optional, fill = "TIM17_IRQHandler" ); // TIM17 global interrupt + vector ( id = 43, optional, fill = "TIM118_DAC2_IRQHandler" ); // TIM18 global Interrupt and DAC2 underrun Interrupt + vector ( id = 44, optional, fill = "TIM2_IRQHandler" ); // TIM2 global interrupt + vector ( id = 45, optional, fill = "TIM3_IRQHandler" ); // TIM3 global interrupt + vector ( id = 46, optional, fill = "TIM4_IRQHandler" ); // TIM4 global interrupt + vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" ); // I2C1 Event + vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" ); // I2C1 Error + vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" ); // I2C2 Event + vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" ); // I2C2 Error + vector ( id = 51, optional, fill = "SPI1_IRQHandler" ); // SPI1 global interrupt + vector ( id = 52, optional, fill = "SPI2_IRQHandler" ); // SPI2 global interrupt + vector ( id = 53, optional, fill = "USART1_IRQHandler" ); // USART1 global interrupt + vector ( id = 54, optional, fill = "USART2_IRQHandler" ); // USART2 global interrupt + vector ( id = 55, optional, fill = "USART3_IRQHandler" ); // USART3 global interrupt + vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" ); // EXTI Line 15..10 interrupts + vector ( id = 57, optional, fill = "RTC_Alarm_IRQHandler" ); // RTC Alarm through EXTI Line + vector ( id = 58, optional, fill = "CEC_IRQHandler" ); // CEC interrupt + vector ( id = 59, optional, fill = "TIM12_IRQHandler" ); // TIM12 global interrupt + vector ( id = 60, optional, fill = "TIM13_IRQHandler" ); // TIM13 global interrupt + vector ( id = 61, optional, fill = "TIM14_IRQHandler" ); // TIM14 global interrupt + vector ( id = 66, optional, fill = "TIM5_IRQHandler" ); // TIM5 global interrupt + vector ( id = 67, optional, fill = "SPI3_IRQHandler" ); // SPI3 global interrupt + vector ( id = 70, optional, fill = "TIM6_DAC1_IRQHandler" ); // TIM6 glbl irq, DAC1 CH1 & CH2 underrun err irqs + vector ( id = 71, optional, fill = "TIM7_IRQHandler" ); // TIM7 global interrupt + vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" ); // DMA2 Channel 1 global interrupt + vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" ); // DMA2 Channel 2 global interrupt + vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" ); // DMA2 Channel 3 global interrupt + vector ( id = 75, optional, fill = "DMA2_Channel4_IRQHandler" ); // DMA2 Channel 4 global interrupt + vector ( id = 76, optional, fill = "DMA2_Channel5_IRQHandler" ); // DMA2 Channel 5 global interrupt + vector ( id = 77, optional, fill = "SDADC1_IRQHandler" ); // ADC Sigma Delta 1 global Interrupt + vector ( id = 78, optional, fill = "SDADC2_IRQHandler" ); // ADC Sigma Delta 2 global Interrupt + vector ( id = 79, optional, fill = "SDADC3_IRQHandler" ); // ADC Sigma Delta 3 global Interrupt + vector ( id = 80, optional, fill = "COMP_IRQHandler" ); // COMP1 and COMP2 global interrupt + vector ( id = 90, optional, fill = "USB_HP_IRQHandler" ); // USB High Priority global Interrupt + vector ( id = 91, optional, fill = "USB_LP_IRQHandler" ); // USB Low Priority global Interrupt + vector ( id = 92, optional, fill = "USBWakeUp_IRQHandler" ); // USB Wakeup Interrupt + vector ( id = 94, optional, fill = "TIM19_IRQHandler" ); // TIM19 global Interrupt + vector ( id = 97, optional, fill = "FPU_IRQHandler" ); // Floating point Interrupt + } +} +#endif /* __CMSIS_VECTORS */ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.cproject new file mode 100644 index 0000000..e8e0231 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.cproject @@ -0,0 +1,267 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.atollic.truestudio.exe.debug.316348137"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.316348137" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings> + <externalSetting languages="com.atollic.truestudio.gcc.input.1633913031"/> + </externalSettings> + <extensions> + <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="elf" artifactName="STM3210B-EVAL" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.316348137" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.exe.debug.316348137." name="/" resourcePath=""> + <toolChain id="com.atollic.truestudio.exe.debug.toolchain.1057655060" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.734843313" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> + <builder buildPath="${workspace_loc:/STM3210B-EVAL/Debug}" id="com.atollic.truestudio.mbs.builder1.290457456" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.732033945" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.1322668714" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.898768892" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.424153249" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <inputType id="com.atollic.truestudio.as.input.2142008470" name="Input" superClass="com.atollic.truestudio.as.input"/> + </tool> + <tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.1973350339" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.directories.select.1988110866" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Device/ST/STM32F10x/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32_USB-FS-Device_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32F10x_StdPeriph_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/Common"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/STM3210B_EVAL"/> + <listOptionValue builtIn="false" value="../../../inc"/> + </option> + <option id="com.atollic.truestudio.gcc.symbols.defined.1107808842" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STM3210B_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_MD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.2070040810" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1801492075" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.175735774" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.601877778" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.496634270" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.misc.otherflags.971275986" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value="-Os" valueType="string"/> + <inputType id="com.atollic.truestudio.gcc.input.1633913031" superClass="com.atollic.truestudio.gcc.input"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ld.172484552" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.1498290489" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1792104502" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.784303318" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.1117909711" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="${workspace_loc:\STM3210B-EVAL\stm32_flash.ld}" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.296160824" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <inputType id="com.atollic.truestudio.ld.input.1781072409" name="Input" superClass="com.atollic.truestudio.ld.input"> + <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> + <additionalInput kind="additionalinput" paths="$(LIBS)"/> + </inputType> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.315707442" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.1911990920" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> + <listOptionValue builtIn="false" value="USE_STM3210B_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_MD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.313911374" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.887021457" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1958027324" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.1399417399" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.157276368" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.2035464181" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.2081839827" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.309940778" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1006608507" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1247154487" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.1794965867" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.950094097" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM3210B-EVAL\stm32_flash.ld}" valueType="string"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.secoutput.1253646741" name="Other" superClass="com.atollic.truestudio.exe.debug.toolchain.secoutput"/> + </toolChain> + </folderInfo> + <sourceEntries> + <entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/> + </sourceEntries> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.316348137;com.atollic.truestudio.exe.debug.316348137.;com.atollic.truestudio.exe.debug.toolchain.gcc.1973350339;com.atollic.truestudio.gcc.input.1633913031"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM3210B-EVAL.com.atollic.truestudio.exe.260392079" name="Executable" projectType="com.atollic.truestudio.exe"/> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.project new file mode 100644 index 0000000..55adf03 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/.project @@ -0,0 +1,286 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>STM3210B-EVAL</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + <dictionary> + <key>?name?</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.append_environment</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildArguments</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildCommand</key> + <value>make</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildLocation</key> + <value>${workspace_loc:/STM3210B-EVAL/Debug}</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.contents</key> + <value>org.eclipse.cdt.make.core.activeConfigSettings</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableAutoBuild</key> + <value>false</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableCleanBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableFullBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.stopOnError</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> + <value>true</value> + </dictionary> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> + <linkedResources> + <link> + <name>CMSIS</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>Doc</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>STM3210B_EVAL</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>TrueSTUDIO</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>User</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>CMSIS/system_stm32f10x.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/system_stm32f10x.c</locationURI> + </link> + <link> + <name>Doc/readme.txt</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/readme.txt</locationURI> + </link> + <link> + <name>STM3210B_EVAL/stm3210b_eval.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM3210B_EVAL/stm3210b_eval.c</locationURI> + </link> + <link> + <name>STM3210B_EVAL/stm3210b_eval_spi_sd.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM3210B_EVAL/stm3210b_eval_spi_sd.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/misc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_dma.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_exti.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_flash.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_fsmc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_gpio.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_rcc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_sdio.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_spi.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c</locationURI> + </link> + <link> + <name>STM32F10x_StdPeriph_Driver/stm32f10x_usart.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c</locationURI> + </link> + <link> + <name>TrueSTUDIO/startup_stm32f10x_md.s</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32F10x/Source/Templates/TrueSTUDIO/startup_stm32f10x_md.s</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_core.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_init.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_int.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_mem.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_regs.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_sil.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c</locationURI> + </link> + <link> + <name>User/fsmc_nand.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/fsmc_nand.c</locationURI> + </link> + <link> + <name>User/hw_config.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/hw_config.c</locationURI> + </link> + <link> + <name>User/main.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/main.c</locationURI> + </link> + <link> + <name>User/mass_mal.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/mass_mal.c</locationURI> + </link> + <link> + <name>User/memory.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/memory.c</locationURI> + </link> + <link> + <name>User/nand_if.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/nand_if.c</locationURI> + </link> + <link> + <name>User/scsi_data.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/scsi_data.c</locationURI> + </link> + <link> + <name>User/stm32_it.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/stm32_it.c</locationURI> + </link> + <link> + <name>User/usb_bot.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_bot.c</locationURI> + </link> + <link> + <name>User/usb_desc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_desc.c</locationURI> + </link> + <link> + <name>User/usb_endp.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_endp.c</locationURI> + </link> + <link> + <name>User/usb_istr.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_istr.c</locationURI> + </link> + <link> + <name>User/usb_prop.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_prop.c</locationURI> + </link> + <link> + <name>User/usb_pwr.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_pwr.c</locationURI> + </link> + <link> + <name>User/usb_scsi.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_scsi.c</locationURI> + </link> + </linkedResources> +</projectDescription> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld new file mode 100644 index 0000000..e0aa35c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103VB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20005000; /* end of 20K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/.cproject new file mode 100644 index 0000000..9640115 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/.cproject @@ -0,0 +1,353 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.atollic.truestudio.exe.debug.311825581"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.311825581" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="elf" artifactName="STM3210E-EVAL" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.311825581" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.exe.debug.311825581." name="/" resourcePath=""> + <toolChain id="com.atollic.truestudio.exe.debug.toolchain.1420439189" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.GNU_ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.151927203" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> + <builder buildPath="${workspace_loc:/STM3210E-EVAL/Debug}" id="com.atollic.truestudio.mbs.builder1.1914283841" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"> + <outputEntries> + <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Debug"/> + </outputEntries> + </builder> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.1164707273" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.106420962" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.568212416" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1812317909" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.as.general.incpath.521871915" name="Include path" superClass="com.atollic.truestudio.as.general.incpath"/> + <inputType id="com.atollic.truestudio.as.input.305266555" name="Input" superClass="com.atollic.truestudio.as.input"/> + </tool> + <tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.1123980438" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.directories.select.439682285" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Device/ST/STM32F10x/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32_USB-FS-Device_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32F10x_StdPeriph_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/Common"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="../../../inc"/> + </option> + <option id="com.atollic.truestudio.gcc.symbols.defined.2128372492" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_HD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.492059125" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1329265125" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1481983578" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.1725101992" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.1467069942" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.misc.otherflags.1098450239" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value="-Os -fno-strict-aliasing " valueType="string"/> + <inputType id="com.atollic.truestudio.gcc.input.488480100" superClass="com.atollic.truestudio.gcc.input"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ld.1761649334" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.1518303750" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.75478988" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.258687522" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.168624971" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="${workspace_loc:\STM3210E-EVAL\stm32_flash.ld}" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.1748822620" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <inputType id="com.atollic.truestudio.ld.input.700384899" name="Input" superClass="com.atollic.truestudio.ld.input"> + <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> + <additionalInput kind="additionalinput" paths="$(LIBS)"/> + </inputType> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.527336926" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.926135890" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> + <listOptionValue builtIn="false" value="USE_STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_HD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.559070467" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.808997326" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1981448318" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.926671416" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.411635994" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.263523013" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.1992835162" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.82127981" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.39484667" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1432065453" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.631690809" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.1826693274" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM3210E-EVAL\stm32_flash.ld}" valueType="string"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.secoutput.1229202631" name="Other" superClass="com.atollic.truestudio.exe.debug.toolchain.secoutput"/> + </toolChain> + </folderInfo> + <sourceEntries> + <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/> + </sourceEntries> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.311825581;com.atollic.truestudio.exe.debug.311825581.;com.atollic.truestudio.exe.debug.toolchain.gcc.1123980438;com.atollic.truestudio.gcc.input.488480100"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.22089575;com.atollic.truestudio.exe.debug.22089575.;com.atollic.truestudio.exe.debug.toolchain.gcc.1449748890;com.atollic.truestudio.gcc.input.408550467"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> + <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM3210E-EVAL.com.atollic.truestudio.exe.1347824761" name="Executable" projectType="com.atollic.truestudio.exe"/> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch new file mode 100644 index 0000000..34526a8 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="com.atollic.hardwaredebug.launch.launchConfigurationType"> +<stringAttribute key="com.atollic.hardwaredebug.launch.analyzeCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Reset to known state monitor reset # Start the executable. continue"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.enable_swv" value="false"/> +<intAttribute key="com.atollic.hardwaredebug.launch.formatVersion" value="2"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.initCommands" value=""/> +<stringAttribute key="com.atollic.hardwaredebug.launch.ipAddress" value="localhost"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.jtagDevice" value="ST-LINK"/> +<intAttribute key="com.atollic.hardwaredebug.launch.portNumber" value="61234"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.remoteCommand" value="target extended-remote"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.runCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Set a breakpoint at main(). tbreak main # Reset to known state monitor reset # Run to the breakpoint. continue"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.serverParam" value="-p 61234 -l 1 -d"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.startServer" value="true"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.swd_mode" value="true"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_port" value="61235"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_div" value="8"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_hclk" value="8000000"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.swv_wait_for_sync" value="true"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.useRemoteTarget" value="true"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.verifyCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Set a breakpoint at main(). tbreak main # Reset to known state monitor reset # Run to the breakpoint. continue"/> +<booleanAttribute key="com.atollic.hardwaredebug.stlink.enable_logging" value="false"/> +<stringAttribute key="com.atollic.hardwaredebug.stlink.log_file" value="C:\VSS\BARRACUDA\INTRODUCTION PACKAGE\FIRMWARE\STM32_USB-FS-Device_Lib\Project\Mass_Storage\TrueSTUDIO\STM3210E-EVAL\Debug\st-link_gdbserver_log.txt"/> +<booleanAttribute key="com.atollic.hardwaredebug.stlink.verify_flash" value="false"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard (Windows)"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb"/> +<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/STM3210E-EVAL.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="STM3210E-EVAL"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/STM3210E-EVAL"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +</launchConfiguration> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld new file mode 100644 index 0000000..8320534 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103ZE Device with +** 512KByte FLASH, 64KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20010000; /* end of 64K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.cproject new file mode 100644 index 0000000..ae89404 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.cproject @@ -0,0 +1,264 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.atollic.truestudio.exe.debug.189815562"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.189815562" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="elf" artifactName="STM32F10X_XL" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.189815562" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.exe.debug.189815562." name="/" resourcePath=""> + <toolChain id="com.atollic.truestudio.exe.debug.toolchain.1571285751" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.GNU_ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.1739352405" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> + <builder buildPath="${workspace_loc:/STM32F103ZG/Debug}" id="com.atollic.truestudio.mbs.builder1.61462586" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX} ${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.371140336" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.1578134158" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1314431980" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZG" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.387750939" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <inputType id="com.atollic.truestudio.as.input.1699410786" name="Input" superClass="com.atollic.truestudio.as.input"/> + </tool> + <tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX} ${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.486923113" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.directories.select.1744802288" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Device/ST/STM32F10x/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32_USB-FS-Device_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32F10x_StdPeriph_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/Common"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="../../../inc"/> + </option> + <option id="com.atollic.truestudio.gcc.symbols.defined.1922813422" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + <listOptionValue builtIn="false" value="USE_STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_XL"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.529651997" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1684401938" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZG" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1997653104" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.586288316" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.1474007059" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.misc.otherflags.478503528" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value="-Os -fno-strict-aliasing " valueType="string"/> + <inputType id="com.atollic.truestudio.gcc.input.377284588" superClass="com.atollic.truestudio.gcc.input"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ld.244354017" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.155448976" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.915646075" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZG" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1739994990" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.1049792298" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="${workspace_loc:\STM3210E-EVAL_XL\stm32_flash.ld}" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.517514787" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <inputType id="com.atollic.truestudio.ld.input.731011867" name="Input" superClass="com.atollic.truestudio.ld.input"> + <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> + <additionalInput kind="additionalinput" paths="$(LIBS)"/> + </inputType> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.1523226111" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.26443420" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> + <listOptionValue builtIn="false" value="STM32F10X_HD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.1289217812" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.144019967" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZG" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1807046025" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.704598245" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.478811538" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.864630601" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.1692358135" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.820544888" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.710897842" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZG" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.160897551" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.417308276" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.1343613995" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM32F103ZG\stm32_flash.ld}" valueType="string"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.secoutput.1632621166" name="Other" superClass="com.atollic.truestudio.exe.debug.toolchain.secoutput"/> + </toolChain> + </folderInfo> + <sourceEntries> + <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/> + </sourceEntries> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.189815562;com.atollic.truestudio.exe.debug.189815562.;com.atollic.truestudio.exe.debug.toolchain.gcc.486923113;com.atollic.truestudio.gcc.input.377284588"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM32F103ZG.com.atollic.truestudio.exe.973923606" name="Executable" projectType="com.atollic.truestudio.exe"/> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 0000000..e203a53 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,12 @@ +#Mon Mar 19 15:58:40 GMT+01:00 2012 +BOARD=STM3210E-EVAL_XL +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32F103ZG +MCU_VENDOR=STMicroelectronics +MODEL=Lite +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STMicroelectronics\u00AE STM32\u2122 +VERSION=2.3.0 +eclipse.preferences.version=1 diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld new file mode 100644 index 0000000..b1c6965 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103ZG Device with +** 1MByte FLASH, 96KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20018000; /* end of 96K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1M + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32303C-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32303C-EVAL/.cproject new file mode 100644 index 0000000..5929ca9 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32303C-EVAL/.cproject @@ -0,0 +1,352 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.atollic.truestudio.exe.debug.311825581"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.311825581" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings/> + <extensions> + <extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.311825581" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.exe.debug.311825581." name="/" resourcePath=""> + <toolChain id="com.atollic.truestudio.exe.debug.toolchain.1420439189" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.GNU_ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.151927203" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> + <builder buildPath="${workspace_loc:/STM3210E-EVAL/Debug}" id="com.atollic.truestudio.mbs.builder1.1914283841" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"> + <outputEntries> + <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="outputPath" name="Debug"/> + </outputEntries> + </builder> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.1164707273" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.106420962" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.568212416" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F303VC" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1812317909" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.as.general.incpath.521871915" name="Include path" superClass="com.atollic.truestudio.as.general.incpath"/> + <inputType id="com.atollic.truestudio.as.input.305266555" name="Input" superClass="com.atollic.truestudio.as.input"/> + </tool> + <tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.1123980438" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.directories.select.439682285" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Device/ST/STM32F30x/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32_USB-FS-Device_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32F30x_StdPeriph_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/Common"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/STM32303C_EVAL"/> + <listOptionValue builtIn="false" value="../../../inc"/> + </option> + <option id="com.atollic.truestudio.gcc.symbols.defined.2128372492" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + <listOptionValue builtIn="false" value="STM32F30X"/> + <listOptionValue builtIn="false" value="USE_STM32303C_EVAL"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.492059125" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1329265125" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F303VC" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1481983578" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.1725101992" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.1467069942" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.misc.otherflags.1729058625" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value="" valueType="string"/> + <option id="com.atollic.truestudio.exe.debug.toolchain.gcc.optimization.level.2061924893" name="Optimization Level" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc.optimization.level" value="com.atollic.truestudio.gcc.optimization.level.0s" valueType="enumerated"/> + <inputType id="com.atollic.truestudio.gcc.input.488480100" superClass="com.atollic.truestudio.gcc.input"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ld.1761649334" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.1518303750" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.75478988" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F303VC" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.258687522" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.168624971" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="../STM32F303VC_FLASH.ld" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.1748822620" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <inputType id="com.atollic.truestudio.ld.input.700384899" name="Input" superClass="com.atollic.truestudio.ld.input"> + <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> + <additionalInput kind="additionalinput" paths="$(LIBS)"/> + </inputType> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.527336926" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.926135890" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> + <listOptionValue builtIn="false" value="USE_STM3210E_EVAL"/> + <listOptionValue builtIn="false" value="STM32F10X_HD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.559070467" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.808997326" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F303VC" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1981448318" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.926671416" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.411635994" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.263523013" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.1992835162" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.82127981" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.39484667" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F303VC" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1432065453" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.631690809" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.1826693274" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM3210E-EVAL\stm32_flash.ld}" valueType="string"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.secoutput.1826436830" name="Other" superClass="com.atollic.truestudio.exe.debug.toolchain.secoutput"/> + </toolChain> + </folderInfo> + <sourceEntries> + <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/> + </sourceEntries> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> + <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM3210E-EVAL.com.atollic.truestudio.exe.1347824761" name="Executable" projectType="com.atollic.truestudio.exe"/> + </storageModule> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.311825581;com.atollic.truestudio.exe.debug.311825581.;com.atollic.truestudio.exe.debug.toolchain.gcc.1123980438;com.atollic.truestudio.gcc.input.488480100"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.22089575;com.atollic.truestudio.exe.debug.22089575.;com.atollic.truestudio.exe.debug.toolchain.gcc.1449748890;com.atollic.truestudio.gcc.input.408550467"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/.cproject new file mode 100644 index 0000000..ea1ef10 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/.cproject @@ -0,0 +1,267 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<?fileVersion 4.0.0?> + +<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> + <storageModule moduleId="org.eclipse.cdt.core.settings"> + <cconfiguration id="com.atollic.truestudio.exe.debug.316348137"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.316348137" moduleId="org.eclipse.cdt.core.settings" name="Debug"> + <externalSettings> + <externalSetting languages="com.atollic.truestudio.gcc.input.1633913031"/> + </externalSettings> + <extensions> + <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> + <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> + </extensions> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <configuration artifactExtension="elf" artifactName="STM32L152-EVAL" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.316348137" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.exe.debug.316348137." name="/" resourcePath=""> + <toolChain id="com.atollic.truestudio.exe.debug.toolchain.1057655060" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.734843313" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> + <builder buildPath="${workspace_loc:/STM3210B-EVAL/Debug}" id="com.atollic.truestudio.mbs.builder1.290457456" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.732033945" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.1322668714" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.898768892" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32L152VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.424153249" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <inputType id="com.atollic.truestudio.as.input.2142008470" name="Input" superClass="com.atollic.truestudio.as.input"/> + </tool> + <tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.1973350339" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.directories.select.1988110866" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/CMSIS/Device/ST/STM32L1xx/Include"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32_USB-FS-Device_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Libraries/STM32L1xx_StdPeriph_Driver/inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/Common"/> + <listOptionValue builtIn="false" value="../../../inc"/> + <listOptionValue builtIn="false" value="../../../../../Utilities/STM32_EVAL/STM32L152_EVAL"/> + </option> + <option id="com.atollic.truestudio.gcc.symbols.defined.1107808842" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + <listOptionValue builtIn="false" value="STM32L1XX_MD"/> + <listOptionValue builtIn="false" value="USE_STM32L152_EVAL"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.2070040810" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1801492075" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32L152VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.175735774" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.601877778" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.496634270" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.misc.otherflags.1423180437" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value=" -Os" valueType="string"/> + <inputType id="com.atollic.truestudio.gcc.input.1633913031" superClass="com.atollic.truestudio.gcc.input"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ld.172484552" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.1498290489" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1792104502" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32L152VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.784303318" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.1117909711" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="${workspace_loc:\STM32L152-EVAL\stm32_flash.ld}" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.296160824" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <inputType id="com.atollic.truestudio.ld.input.1781072409" name="Input" superClass="com.atollic.truestudio.ld.input"> + <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> + <additionalInput kind="additionalinput" paths="$(LIBS)"/> + </inputType> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.315707442" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.1911990920" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> + <listOptionValue builtIn="false" value="USE_STM3210B_EVAL"/> + <listOptionValue builtIn="false" value="STM32L1xx_MD"/> + <listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> + </option> + <option id="com.atollic.truestudio.common_options.target.endianess.313911374" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.887021457" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32L152VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1958027324" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.1399417399" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.157276368" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.2035464181" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.2081839827" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.309940778" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1006608507" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32L152VB" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1247154487" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.1794965867" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.950094097" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM3210B-EVAL\stm32_flash.ld}" valueType="string"/> + </tool> + <tool id="com.atollic.truestudio.exe.debug.toolchain.secoutput.1010173629" name="Other" superClass="com.atollic.truestudio.exe.debug.toolchain.secoutput"/> + </toolChain> + </folderInfo> + <sourceEntries> + <entry flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/> + </sourceEntries> + </configuration> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> + <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> + <storageModule moduleId="scannerConfiguration"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.316348137;com.atollic.truestudio.exe.debug.316348137.;com.atollic.truestudio.exe.debug.toolchain.gcc.1973350339;com.atollic.truestudio.gcc.input.1633913031"> + <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="makefileGenerator"> + <runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> + <buildOutputProvider> + <openAction enabled="true" filePath=""/> + <parser enabled="true"/> + </buildOutputProvider> + <scannerInfoProvider id="specsFile"> + <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> + <parser enabled="true"/> + </scannerInfoProvider> + </profile> + </scannerConfigBuildInfo> + </storageModule> + <storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> + </cconfiguration> + </storageModule> + <storageModule moduleId="cdtBuildSystem" version="4.0.0"> + <project id="STM3210B-EVAL.com.atollic.truestudio.exe.260392079" name="Executable" projectType="com.atollic.truestudio.exe"/> + </storageModule> +</cproject> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld new file mode 100644 index 0000000..1be62d5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld @@ -0,0 +1,171 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for stm32l1xx_md Device with +** 128KByte FLASH, 16KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004000; /* end of 16K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x80; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152D-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152D-EVAL/.project new file mode 100644 index 0000000..29b4e37 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/TrueSTUDIO/STM32L152D-EVAL/.project @@ -0,0 +1,276 @@ +<?xml version="1.0" encoding="UTF-8"?> +<projectDescription> + <name>STM32L152D-EVAL</name> + <comment></comment> + <projects> + </projects> + <buildSpec> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> + <triggers>clean,full,incremental,</triggers> + <arguments> + <dictionary> + <key>?name?</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.append_environment</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildArguments</key> + <value></value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildCommand</key> + <value>make</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.buildLocation</key> + <value>${workspace_loc:/STM3210B-EVAL/Debug}</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.contents</key> + <value>org.eclipse.cdt.make.core.activeConfigSettings</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableAutoBuild</key> + <value>false</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableCleanBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.enableFullBuild</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.stopOnError</key> + <value>true</value> + </dictionary> + <dictionary> + <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> + <value>true</value> + </dictionary> + </arguments> + </buildCommand> + <buildCommand> + <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> + <arguments> + </arguments> + </buildCommand> + </buildSpec> + <natures> + <nature>org.eclipse.cdt.core.cnature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> + <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> + </natures> + <linkedResources> + <link> + <name>CMSIS</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>Doc</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>STM32L152D_EVAL</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>TrueSTUDIO</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>User</name> + <type>2</type> + <locationURI>virtual:/virtual</locationURI> + </link> + <link> + <name>CMSIS/system_STM32L1xx.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/system_STM32L1xx.c</locationURI> + </link> + <link> + <name>Doc/readme.txt</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/readme.txt</locationURI> + </link> + <link> + <name>STM32L152D_EVAL/stm32l152d_eval.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM32L152D_EVAL/stm32l152d_eval.c</locationURI> + </link> + <link> + <name>STM32L152D_EVAL/stm32l152d_eval_sdio_sd.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM32L152D_EVAL/stm32l152d_eval_sdio_sd.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_dma.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_dma.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_exti.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_exti.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_flash.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_flash.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_gpio.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_gpio.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_rcc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_rcc.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_spi.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_spi.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/STM32L1xx_usart.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32L1xx_usart.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/misc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/misc.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/stm32l1xx_sdio.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_sdio.c</locationURI> + </link> + <link> + <name>STM32L1xx_StdPeriph_Driver/stm32l1xx_syscfg.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_syscfg.c</locationURI> + </link> + <link> + <name>TrueSTUDIO/startup_STM32L1xx_md.s</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_STM32L1xx_hd.s</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_core.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_init.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_int.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_mem.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_regs.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c</locationURI> + </link> + <link> + <name>USB-FS-Device_Driver/usb_sil.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c</locationURI> + </link> + <link> + <name>User/hw_config.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/hw_config.c</locationURI> + </link> + <link> + <name>User/main.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/main.c</locationURI> + </link> + <link> + <name>User/mass_mal.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/mass_mal.c</locationURI> + </link> + <link> + <name>User/memory.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/memory.c</locationURI> + </link> + <link> + <name>User/scsi_data.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/scsi_data.c</locationURI> + </link> + <link> + <name>User/stm32_it.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/stm32_it.c</locationURI> + </link> + <link> + <name>User/usb_bot.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_bot.c</locationURI> + </link> + <link> + <name>User/usb_desc.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_desc.c</locationURI> + </link> + <link> + <name>User/usb_endp.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_endp.c</locationURI> + </link> + <link> + <name>User/usb_istr.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_istr.c</locationURI> + </link> + <link> + <name>User/usb_prop.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_prop.c</locationURI> + </link> + <link> + <name>User/usb_pwr.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_pwr.c</locationURI> + </link> + <link> + <name>User/usb_scsi.c</name> + <type>1</type> + <locationURI>PARENT-4-PROJECT_LOC/Projects/Mass_Storage/src/usb_scsi.c</locationURI> + </link> + </linkedResources> +</projectDescription> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/nand_if.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/nand_if.h new file mode 100644 index 0000000..5d2e824 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/nand_if.h @@ -0,0 +1,80 @@ +/** + ****************************************************************************** + * @file nand_if.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief All functions related to the NAND process + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __NAND_IF_H +#define __NAND_IF_H + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +#define NAND_OK 0 +#define NAND_FAIL 1 + +#define FREE_BLOCK (1 << 12 ) +#define BAD_BLOCK (1 << 13 ) +#define VALID_BLOCK (1 << 14 ) +#define USED_BLOCK (1 << 15 ) + +#define MAX_PHY_BLOCKS_PER_ZONE 1024 +#define MAX_LOG_BLOCKS_PER_ZONE 1000 +/* Private Structures---------------------------------------------------------*/ +typedef struct __SPARE_AREA { + uint16_t LogicalIndex; + uint16_t DataStatus; + uint16_t BlockStatus; +} SPARE_AREA; + +typedef enum { + WRITE_IDLE = 0, + POST_WRITE, + PRE_WRITE, + WRITE_CLEANUP, + WRITE_ONGOING +}WRITE_STATE; + +typedef enum { + OLD_BLOCK = 0, + UNUSED_BLOCK +}BLOCK_STATE; + +/* Private macro --------------------------------------------------------------*/ +//#define WEAR_LEVELLING_SUPPORT +#define WEAR_DEPTH 10 +#define PAGE_TO_WRITE (Transfer_Length/512) +/* Private variables ----------------------------------------------------------*/ +/* Private function prototypes ------------------------------------------------*/ +/* exported functions ---------------------------------------------------------*/ +uint16_t NAND_Init (void); +uint16_t NAND_Write (uint32_t Memory_Offset, uint32_t *Writebuff, uint16_t Transfer_Length); +uint16_t NAND_Read (uint32_t Memory_Offset, uint32_t *Readbuff, uint16_t Transfer_Length); +uint16_t NAND_Format (void); +SPARE_AREA ReadSpareArea (uint32_t address); +#endif +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/stm32l1xx_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/stm32l1xx_conf.h new file mode 100644 index 0000000..e67e6b9 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/stm32l1xx_conf.h @@ -0,0 +1,83 @@ +/** + ****************************************************************************** + * @file stm32l1xx_conf.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_CONF_H +#define __STM32L1xx_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment the line below to enable peripheral header file inclusion */ +#include "stm32l1xx_adc.h" +#include "stm32l1xx_crc.h" +#include "stm32l1xx_comp.h" +#include "stm32l1xx_dac.h" +#include "stm32l1xx_dbgmcu.h" +#include "stm32l1xx_dma.h" +#include "stm32l1xx_exti.h" +#include "stm32l1xx_flash.h" +#include "stm32l1xx_gpio.h" +#include "stm32l1xx_syscfg.h" +#include "stm32l1xx_i2c.h" +#include "stm32l1xx_iwdg.h" +#include "stm32l1xx_lcd.h" +#include "stm32l1xx_pwr.h" +#include "stm32l1xx_rcc.h" +#include "stm32l1xx_rtc.h" +#include "stm32l1xx_spi.h" +#include "stm32l1xx_tim.h" +#include "stm32l1xx_usart.h" +#include "stm32l1xx_wwdg.h" +#include "stm32l1xx_sdio.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval : None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32L1xx_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_bot.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_bot.h new file mode 100644 index 0000000..9063ccb --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_bot.h @@ -0,0 +1,100 @@ +/** + ****************************************************************************** + * @file usb_bot.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief BOT State Machine management + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_BOT_H +#define __USB_BOT_H + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Bulk-only Command Block Wrapper */ + +typedef struct _Bulk_Only_CBW +{ + uint32_t dSignature; + uint32_t dTag; + uint32_t dDataLength; + uint8_t bmFlags; + uint8_t bLUN; + uint8_t bCBLength; + uint8_t CB[16]; +} +Bulk_Only_CBW; + +/* Bulk-only Command Status Wrapper */ +typedef struct _Bulk_Only_CSW +{ + uint32_t dSignature; + uint32_t dTag; + uint32_t dDataResidue; + uint8_t bStatus; +} +Bulk_Only_CSW; +/* Exported constants --------------------------------------------------------*/ + +/*****************************************************************************/ +/*********************** Bulk-Only Transfer State machine ********************/ +/*****************************************************************************/ +#define BOT_IDLE 0 /* Idle state */ +#define BOT_DATA_OUT 1 /* Data Out state */ +#define BOT_DATA_IN 2 /* Data In state */ +#define BOT_DATA_IN_LAST 3 /* Last Data In Last */ +#define BOT_CSW_Send 4 /* Command Status Wrapper */ +#define BOT_ERROR 5 /* error state */ + +#define BOT_CBW_SIGNATURE 0x43425355 +#define BOT_CSW_SIGNATURE 0x53425355 +#define BOT_CBW_PACKET_LENGTH 31 + +#define CSW_DATA_LENGTH 0x000D + +/* CSW Status Definitions */ +#define CSW_CMD_PASSED 0x00 +#define CSW_CMD_FAILED 0x01 +#define CSW_PHASE_ERROR 0x02 + +#define SEND_CSW_DISABLE 0 +#define SEND_CSW_ENABLE 1 + +#define DIR_IN 0 +#define DIR_OUT 1 +#define BOTH_DIR 2 + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +void Mass_Storage_In (void); +void Mass_Storage_Out (void); +void CBW_Decode(void); +void Transfer_Data_Request(uint8_t* Data_Pointer, uint16_t Data_Len); +void Set_CSW (uint8_t CSW_Status, uint8_t Send_Permission); +void Bot_Abort(uint8_t Direction); + +#endif /* __USB_BOT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_conf.h new file mode 100644 index 0000000..c2ae9bf --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_conf.h @@ -0,0 +1,87 @@ +/** + ****************************************************************************** + * @file usb_conf.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Mass Storage Demo configuration header + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CONF_H +#define __USB_CONF_H + +/*-------------------------------------------------------------*/ +/* EP_NUM */ +/* defines how many endpoints are used by the device */ +/*-------------------------------------------------------------*/ +#define EP_NUM (3) + +/*-------------------------------------------------------------*/ +/* -------------- Buffer Description Table -----------------*/ +/*-------------------------------------------------------------*/ +/* buffer table base address */ + +#define BTABLE_ADDRESS (0x00) + +/* EP0 */ +/* rx/tx buffer base address */ +#define ENDP0_RXADDR (0x18) +#define ENDP0_TXADDR (0x58) + +/* EP1 */ +/* tx buffer base address */ +#define ENDP1_TXADDR (0x98) + +/* EP2 */ +/* Rx buffer base address */ +#define ENDP2_RXADDR (0xD8) + + +/* ISTR events */ +/* IMR_MSK */ +/* mask defining which events has to be handled */ +/* by the device application software */ +#define IMR_MSK (CNTR_CTRM | CNTR_WKUPM | CNTR_SUSPM | CNTR_ERRM | CNTR_SOFM \ + | CNTR_ESOFM | CNTR_RESETM ) + +/* CTR service routines */ +/* associated to defined endpoints */ +//#define EP1_IN_Callback NOP_Process +#define EP2_IN_Callback NOP_Process +#define EP3_IN_Callback NOP_Process +#define EP4_IN_Callback NOP_Process +#define EP5_IN_Callback NOP_Process +#define EP6_IN_Callback NOP_Process +#define EP7_IN_Callback NOP_Process + + +#define EP1_OUT_Callback NOP_Process +//#define EP2_OUT_Callback NOP_Process +#define EP3_OUT_Callback NOP_Process +#define EP4_OUT_Callback NOP_Process +#define EP5_OUT_Callback NOP_Process +#define EP6_OUT_Callback NOP_Process +#define EP7_OUT_Callback NOP_Process + +#endif /* __USB_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_istr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_istr.h new file mode 100644 index 0000000..d2a07f6 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/inc/usb_istr.h @@ -0,0 +1,95 @@ +/** + ****************************************************************************** + * @file usb_istr.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief This file includes the peripherals header files in the user application. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_ISTR_H +#define __USB_ISTR_H + +/* Includes ------------------------------------------------------------------*/ +#include "usb_conf.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + + void USB_Istr(void); + +/* function prototypes Automatically built defining related macros */ + +void EP1_IN_Callback(void); +void EP2_IN_Callback(void); +void EP3_IN_Callback(void); +void EP4_IN_Callback(void); +void EP5_IN_Callback(void); +void EP6_IN_Callback(void); +void EP7_IN_Callback(void); + +void EP1_OUT_Callback(void); +void EP2_OUT_Callback(void); +void EP3_OUT_Callback(void); +void EP4_OUT_Callback(void); +void EP5_OUT_Callback(void); +void EP6_OUT_Callback(void); +void EP7_OUT_Callback(void); + +#ifdef CTR_CALLBACK +void CTR_Callback(void); +#endif + +#ifdef DOVR_CALLBACK +void DOVR_Callback(void); +#endif + +#ifdef ERR_CALLBACK +void ERR_Callback(void); +#endif + +#ifdef WKUP_CALLBACK +void WKUP_Callback(void); +#endif + +#ifdef SUSP_CALLBACK +void SUSP_Callback(void); +#endif + +#ifdef RESET_CALLBACK +void RESET_Callback(void); +#endif + +#ifdef SOF_CALLBACK +void SOF_Callback(void); +#endif + +#ifdef ESOF_CALLBACK +void ESOF_Callback(void); +#endif + +#endif /*__USB_ISTR_H*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/hw_config.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/hw_config.c new file mode 100644 index 0000000..b3976ba --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/hw_config.c @@ -0,0 +1,460 @@ +/** + ****************************************************************************** + * @file hw_config.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Hardware Configuration & Setup + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ + +#include "hw_config.h" +#include "stm32_it.h" +#include "mass_mal.h" +#include "usb_desc.h" +#include "usb_pwr.h" +#include "usb_lib.h" + + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +ErrorStatus HSEStartUpStatus; +EXTI_InitTypeDef EXTI_InitStructure; + +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len); + +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* +* Function Name : Set_System +* Description : Configures Main system clocks & power +* Input : None. +* Return : None. +*******************************************************************************/ +void Set_System(void) +{ +#if defined (STM32F37X) || defined (STM32F30X) + GPIO_InitTypeDef GPIO_InitStructure; +#endif /*STM32L1XX_XD */ + +#if defined(USB_USE_EXTERNAL_PULLUP) + GPIO_InitTypeDef GPIO_InitStructure; +#endif /* USB_USE_EXTERNAL_PULLUP */ + + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32xxx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32xxx.c file + */ +#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS) || defined(STM32F37X) || defined(STM32F30X) + /* Enable the SYSCFG module clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); +#endif /* STM32L1XX_XD */ + +#if !defined (USE_STM32L152_EVAL) + /* Enable and Disconnect Line GPIO clock */ + USB_Disconnect_Config(); +#endif /* USE_STM32L152_EVAL */ + +#if defined (STM32F37X) || defined(STM32F30X) + + /* Enable the USB disconnect GPIO clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIO_DISCONNECT, ENABLE); + + /*Set PA11,12 as IN - USB_DM,DP*/ + + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE); + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + /*SET PA11,12 for USB: USB_DM,DP*/ + GPIO_PinAFConfig(GPIOA, GPIO_PinSource11, GPIO_AF_14); + GPIO_PinAFConfig(GPIOA, GPIO_PinSource12, GPIO_AF_14); + + /* USB_DISCONNECT used as USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure); +#endif /* STM32F37X && STM32F30X */ + +#if defined(USB_USE_EXTERNAL_PULLUP) + /* Enable the USB disconnect GPIO clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIO_DISCONNECT, ENABLE); + + /* USB_DISCONNECT used as USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_OD; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure); +#endif /* USB_USE_EXTERNAL_PULLUP */ + + /* Configure the EXTI line 18 connected internally to the USB IP */ + EXTI_ClearITPendingBit(EXTI_Line18); + EXTI_InitStructure.EXTI_Line = EXTI_Line18; + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); + + /* MAL configuration */ + MAL_Config(); +} + +/******************************************************************************* +* Function Name : Set_USBClock +* Description : Configures USB Clock input (48MHz) +* Input : None. +* Return : None. +*******************************************************************************/ +void Set_USBClock(void) +{ +#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS) + /* Enable USB clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); + +#else + /* Select USBCLK source */ + RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5); + + /* Enable the USB clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); +#endif /* STM32L1XX_XD */ +} + +/******************************************************************************* +* Function Name : Enter_LowPowerMode +* Description : Power-off system clocks and power while entering suspend mode +* Input : None. +* Return : None. +*******************************************************************************/ +void Enter_LowPowerMode(void) +{ + /* Set the device state to suspend */ + bDeviceState = SUSPENDED; +} + +/******************************************************************************* +* Function Name : Leave_LowPowerMode +* Description : Restores system clocks and power while exiting suspend mode +* Input : None. +* Return : None. +*******************************************************************************/ +void Leave_LowPowerMode(void) +{ + DEVICE_INFO *pInfo = &Device_Info; + + /* Set the device state to the correct state */ + if (pInfo->Current_Configuration != 0) + { + /* Device configured */ + bDeviceState = CONFIGURED; + } + else + { + bDeviceState = ATTACHED; + } + /*Enable SystemCoreClock*/ + SystemInit(); +} + +/******************************************************************************* +* Function Name : USB_Interrupts_Config +* Description : Configures the USB interrupts +* Input : None. +* Return : None. +*******************************************************************************/ +void USB_Interrupts_Config(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + /* 2 bit for pre-emption priority, 2 bits for subpriority */ + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + +#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS) + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable the USB Wake-up interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USB_FS_WKUP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + +#elif defined(STM32F37X) + /* Enable the USB interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable the USB Wake-up interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + +#else + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable the USB Wake-up interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_Init(&NVIC_InitStructure); +#endif /* STM32L1XX_XD */ + + +#if defined(STM32F10X_HD) || defined(STM32F10X_XL) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS) + NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_Init(&NVIC_InitStructure); + NVIC_InitStructure.NVIC_IRQChannel = SD_SDIO_DMA_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_Init(&NVIC_InitStructure); +#endif /* STM32L1XX_MD */ + +} + +/******************************************************************************* +* Function Name : Led_Config +* Description : configure the Read/Write LEDs. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void Led_Config(void) +{ + /* Configure the LEDs */ + STM_EVAL_LEDInit(LED1); + STM_EVAL_LEDInit(LED2); + STM_EVAL_LEDInit(LED3); + STM_EVAL_LEDInit(LED4); +} + +/******************************************************************************* +* Function Name : Led_RW_ON +* Description : Turn ON the Read/Write LEDs. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void Led_RW_ON(void) +{ + STM_EVAL_LEDOn(LED3); +} + +/******************************************************************************* +* Function Name : Led_RW_OFF +* Description : Turn off the Read/Write LEDs. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void Led_RW_OFF(void) +{ + STM_EVAL_LEDOff(LED3); +} +/******************************************************************************* +* Function Name : USB_Configured_LED +* Description : Turn ON the Read/Write LEDs. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void USB_Configured_LED(void) +{ + STM_EVAL_LEDOn(LED1); +} + +/******************************************************************************* +* Function Name : USB_NotConfigured_LED +* Description : Turn off the Read/Write LEDs. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void USB_NotConfigured_LED(void) +{ + STM_EVAL_LEDOff(LED1); +} + +/******************************************************************************* +* Function Name : USB_Cable_Config +* Description : Software Connection/Disconnection of USB Cable. +* Input : None. +* Return : Status +*******************************************************************************/ +void USB_Cable_Config (FunctionalState NewState) +{ + +#if defined(STM32L1XX_MD) + if (NewState != DISABLE) + { + STM32L15_USB_CONNECT; + } + else + { + STM32L15_USB_DISCONNECT; + } + +#elif defined(STM32L1XX_HD) || defined(STM32L1XX_MD_PLUS) + if (NewState != DISABLE) + { + GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN); + SYSCFG_USBPuCmd(ENABLE); + } + else + { + GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN); + SYSCFG_USBPuCmd(DISABLE); + } +#endif /* STM32L1XX_MD */ +} + +/******************************************************************************* +* Function Name : Get_SerialNum. +* Description : Create the serial number string descriptor. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void Get_SerialNum(void) +{ + uint32_t Device_Serial0, Device_Serial1, Device_Serial2; + + Device_Serial0 = *(uint32_t*)ID1; + Device_Serial1 = *(uint32_t*)ID2; + Device_Serial2 = *(uint32_t*)ID3; + + Device_Serial0 += Device_Serial2; + + if (Device_Serial0 != 0) + { + IntToUnicode (Device_Serial0, &MASS_StringSerial[2] , 8); + IntToUnicode (Device_Serial1, &MASS_StringSerial[18], 4); + } +} + +/******************************************************************************* +* Function Name : HexToChar. +* Description : Convert Hex 32Bits value into char. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len) +{ + uint8_t idx = 0; + + for( idx = 0 ; idx < len ; idx ++) + { + if( ((value >> 28)) < 0xA ) + { + pbuf[ 2* idx] = (value >> 28) + '0'; + } + else + { + pbuf[2* idx] = (value >> 28) + 'A' - 10; + } + + value = value << 4; + + pbuf[ 2* idx + 1] = 0; + } +} + +/******************************************************************************* +* Function Name : MAL_Config +* Description : MAL_layer configuration +* Input : None. +* Return : None. +*******************************************************************************/ +void MAL_Config(void) +{ + MAL_Init(0); + +#if defined(STM32F10X_HD) || defined(STM32F10X_XL) + /* Enable the FSMC Clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); + MAL_Init(1); +#endif /* STM32F10X_HD | STM32F10X_XL */ +} + +#if !defined (USE_STM32L152_EVAL) +/******************************************************************************* +* Function Name : USB_Disconnect_Config +* Description : Disconnect pin configuration +* Input : None. +* Return : None. +*******************************************************************************/ +void USB_Disconnect_Config(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; +#if defined (USE_STM3210B_EVAL) || defined (USE_STM3210E_EVAL) + /* Enable USB_DISCONNECT GPIO clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_DISCONNECT, ENABLE); + + /* USB_DISCONNECT_PIN used as USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; +#else + /* Enable the USB disconnect GPIO clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIO_DISCONNECT, ENABLE); + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_ALLGPIO, ENABLE); + + /* USB_DISCONNECT used as USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + +#endif + GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure); +} +#endif /* USE_STM3210B_EVAL or USE_STM3210E_EVAL */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/system_stm32f30x.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/system_stm32f30x.c new file mode 100644 index 0000000..31faf5c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/system_stm32f30x.c @@ -0,0 +1,382 @@ +/** + ****************************************************************************** + * @file system_stm32f30x.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * This file contains the system clock configuration for STM32F30x devices, + * and is generated by the clock configuration tool + * stm32f30x_Clock_Configuration_V1.0.0.xls + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * and Divider factors, AHB/APBx prescalers and Flash settings), + * depending on the configuration made in the clock xls tool. + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f30x.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f30x.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define + * in "stm32f30x.h" file. When HSE is used as system clock source, directly or + * through PLL, and you are using different crystal you have to adapt the HSE + * value to your own configuration. + * + * 5. This file configures the system clock as follows: + *============================================================================= + * Supported STM32F30x device + *----------------------------------------------------------------------------- + * System Clock source | PLL (HSE) + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 72000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 72000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 2 + *----------------------------------------------------------------------------- + * HSE Frequency(Hz) | 8000000 + *---------------------------------------------------------------------------- + * PLLMUL | 9 + *----------------------------------------------------------------------------- + * PREDIV | 1 + *----------------------------------------------------------------------------- + * USB Clock | ENABLE + *----------------------------------------------------------------------------- + * Flash Latency(WS) | 2 + *----------------------------------------------------------------------------- + * Prefetch Buffer | ON + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f30x_system + * @{ + */ + +/** @addtogroup STM32F30x_System_Private_Includes + * @{ + */ + +#include "stm32f30x.h" + +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_Defines + * @{ + */ +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_Variables + * @{ + */ + + uint32_t SystemCoreClock = 72000000; + + __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +/** + * @} + */ + +/** @addtogroup STM32F30x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemFrequency variable. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR &= 0xF87FC00C; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= (uint32_t)0xFFFFFFF0; + + /* Reset USARTSW[1:0], I2CSW and TIMs bits */ + RCC->CFGR3 &= (uint32_t)0xFF00FCCC; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings ----------------------------------*/ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f30x.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f30x.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, prediv1factor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration -----------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK / 1 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK / 1 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK / 2 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + + /* PLL configuration */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL9); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_istr.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_istr.c new file mode 100644 index 0000000..90e0061 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_istr.c @@ -0,0 +1,185 @@ +/** + ****************************************************************************** + * @file usb_istr.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief ISTR events interrupt service routines + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "hw_config.h" +#include "usb_type.h" +#include "usb_regs.h" +#include "usb_pwr.h" +#include "usb_istr.h" +#include "usb_init.h" +#include "usb_int.h" +#include "usb_lib.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +__IO uint16_t wIstr; /* ISTR register last read value */ +__IO uint8_t bIntPackSOF = 0; /* SOFs received between 2 consecutive packets */ + +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* function pointers to non-control endpoints service routines */ +void (*pEpInt_IN[7])(void) = + { + EP1_IN_Callback, + EP2_IN_Callback, + EP3_IN_Callback, + EP4_IN_Callback, + EP5_IN_Callback, + EP6_IN_Callback, + EP7_IN_Callback, + }; + +void (*pEpInt_OUT[7])(void) = + { + EP1_OUT_Callback, + EP2_OUT_Callback, + EP3_OUT_Callback, + EP4_OUT_Callback, + EP5_OUT_Callback, + EP6_OUT_Callback, + EP7_OUT_Callback, + }; + +/******************************************************************************* +* Function Name : USB_Istr +* Description : ISTR events interrupt service routine +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void USB_Istr(void) +{ + wIstr = _GetISTR(); + +#if (IMR_MSK & ISTR_CTR) + if (wIstr & ISTR_CTR & wInterrupt_Mask) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + CTR_LP(); +#ifdef CTR_CALLBACK + CTR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_RESET) + if (wIstr & ISTR_RESET & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_RESET); + Device_Property.Reset(); +#ifdef RESET_CALLBACK + RESET_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_DOVR) + if (wIstr & ISTR_DOVR & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_DOVR); +#ifdef DOVR_CALLBACK + DOVR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_ERR) + if (wIstr & ISTR_ERR & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_ERR); +#ifdef ERR_CALLBACK + ERR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_WKUP) + if (wIstr & ISTR_WKUP & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_WKUP); + Resume(RESUME_EXTERNAL); +#ifdef WKUP_CALLBACK + WKUP_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_SUSP) + if (wIstr & ISTR_SUSP & wInterrupt_Mask) + { + + /* check if SUSPEND is possible */ + if (fSuspendEnabled) + { + Suspend(); + } + else + { + /* if not possible then resume after xx ms */ + Resume(RESUME_LATER); + } + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + _SetISTR((uint16_t)CLR_SUSP); +#ifdef SUSP_CALLBACK + SUSP_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_SOF) + if (wIstr & ISTR_SOF & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_SOF); + bIntPackSOF++; + +#ifdef SOF_CALLBACK + SOF_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_ESOF) + if (wIstr & ISTR_ESOF & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_ESOF); + /* resume handling timing is made with ESOFs */ + Resume(RESUME_ESOF); /* request without change of the machine state */ + +#ifdef ESOF_CALLBACK + ESOF_Callback(); +#endif + } +#endif +} /* USB_Istr */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_pwr.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_pwr.c new file mode 100644 index 0000000..04673bd --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Mass_Storage/src/usb_pwr.c @@ -0,0 +1,318 @@ +/** + ****************************************************************************** + * @file usb_pwr.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Connection/disconnection & power management + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "usb_lib.h" +#include "usb_conf.h" +#include "usb_pwr.h" +#include "hw_config.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +__IO uint32_t bDeviceState = UNCONNECTED; /* USB device status */ +__IO bool fSuspendEnabled = TRUE; /* true when suspend is possible */ +__IO uint32_t EP[8]; + +struct +{ + __IO RESUME_STATE eState; + __IO uint8_t bESOFcnt; +} +ResumeS; + +__IO uint32_t remotewakeupon=0; + +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Extern function prototypes ------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* +* Function Name : PowerOn +* Description : +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +RESULT PowerOn(void) +{ + uint16_t wRegVal; + + /*** cable plugged-in ? ***/ + USB_Cable_Config(ENABLE); + + /*** CNTR_PWDN = 0 ***/ + wRegVal = CNTR_FRES; + _SetCNTR(wRegVal); + + /*** CNTR_FRES = 0 ***/ + wInterrupt_Mask = 0; + _SetCNTR(wInterrupt_Mask); + /*** Clear pending interrupts ***/ + _SetISTR(0); + /*** Set interrupt mask ***/ + wInterrupt_Mask = CNTR_RESETM | CNTR_SUSPM | CNTR_WKUPM; + _SetCNTR(wInterrupt_Mask); + + return USB_SUCCESS; +} + +/******************************************************************************* +* Function Name : PowerOff +* Description : handles switch-off conditions +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +RESULT PowerOff() +{ + /* disable all interrupts and force USB reset */ + _SetCNTR(CNTR_FRES); + /* clear interrupt status register */ + _SetISTR(0); + /* Disable the Pull-Up*/ + USB_Cable_Config(DISABLE); + /* switch-off device */ + _SetCNTR(CNTR_FRES + CNTR_PDWN); + /* sw variables reset */ + /* ... */ + + return USB_SUCCESS; +} + +/******************************************************************************* +* Function Name : Suspend +* Description : sets suspend mode operating conditions +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +void Suspend(void) +{ + uint32_t i =0; + uint16_t wCNTR; + uint32_t tmpreg = 0; + __IO uint32_t savePWR_CR=0; + /* suspend preparation */ + /* ... */ + + /*Store CNTR value */ + wCNTR = _GetCNTR(); + + /* This a sequence to apply a force RESET to handle a robustness case */ + + /*Store endpoints registers status */ + for (i=0;i<8;i++) EP[i] = _GetENDPOINT(i); + + /* unmask RESET flag */ + wCNTR|=CNTR_RESETM; + _SetCNTR(wCNTR); + + /*apply FRES */ + wCNTR|=CNTR_FRES; + _SetCNTR(wCNTR); + + /*clear FRES*/ + wCNTR&=~CNTR_FRES; + _SetCNTR(wCNTR); + + /*poll for RESET flag in ISTR*/ + while((_GetISTR()&ISTR_RESET) == 0); + + /* clear RESET flag in ISTR */ + _SetISTR((uint16_t)CLR_RESET); + + /*restore Enpoints*/ + for (i=0;i<8;i++) + _SetENDPOINT(i, EP[i]); + + /* Now it is safe to enter macrocell in suspend mode */ + wCNTR |= CNTR_FSUSP; + _SetCNTR(wCNTR); + + /* force low-power mode in the macrocell */ + wCNTR = _GetCNTR(); + wCNTR |= CNTR_LPMODE; + _SetCNTR(wCNTR); + + /*prepare entry in low power mode (STOP mode)*/ + /* Select the regulator state in STOP mode*/ + savePWR_CR = PWR->CR; + tmpreg = PWR->CR; + /* Clear PDDS and LPDS bits */ + tmpreg &= ((uint32_t)0xFFFFFFFC); + /* Set LPDS bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator_LowPower; + /* Store the new value */ + PWR->CR = tmpreg; + /* Set SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; +#else + SCB->SCR |= SCB_SCR_SLEEPDEEP; +#endif + + /* enter system in STOP mode, only when wakeup flag in not set */ + if((_GetISTR()&ISTR_WKUP)==0) + { + __WFI(); + /* Reset SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +#else + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +#endif + } + else + { + /* Clear Wakeup flag */ + _SetISTR(CLR_WKUP); + /* clear FSUSP to abort entry in suspend mode */ + wCNTR = _GetCNTR(); + wCNTR&=~CNTR_FSUSP; + _SetCNTR(wCNTR); + + /*restore sleep mode configuration */ + /* restore Power regulator config in sleep mode*/ + PWR->CR = savePWR_CR; + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +#else + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +#endif + } +} + +/******************************************************************************* +* Function Name : Resume_Init +* Description : Handles wake-up restoring normal operations +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +void Resume_Init(void) +{ + uint16_t wCNTR; + + /* ------------------ ONLY WITH BUS-POWERED DEVICES ---------------------- */ + /* restart the clocks */ + /* ... */ + + /* CNTR_LPMODE = 0 */ + wCNTR = _GetCNTR(); + wCNTR &= (~CNTR_LPMODE); + _SetCNTR(wCNTR); + + /* restore full power */ + /* ... on connected devices */ + Leave_LowPowerMode(); + + /* reset FSUSP bit */ + _SetCNTR(IMR_MSK); + + /* reverse suspend preparation */ + /* ... */ + +} + +/******************************************************************************* +* Function Name : Resume +* Description : This is the state machine handling resume operations and +* timing sequence. The control is based on the Resume structure +* variables and on the ESOF interrupt calling this subroutine +* without changing machine state. +* Input : a state machine value (RESUME_STATE) +* RESUME_ESOF doesn't change ResumeS.eState allowing +* decrementing of the ESOF counter in different states. +* Output : None. +* Return : None. +*******************************************************************************/ +void Resume(RESUME_STATE eResumeSetVal) +{ + uint16_t wCNTR; + + if (eResumeSetVal != RESUME_ESOF) + ResumeS.eState = eResumeSetVal; + switch (ResumeS.eState) + { + case RESUME_EXTERNAL: + if (remotewakeupon ==0) + { + Resume_Init(); + ResumeS.eState = RESUME_OFF; + } + else /* RESUME detected during the RemoteWAkeup signalling => keep RemoteWakeup handling*/ + { + ResumeS.eState = RESUME_ON; + } + break; + case RESUME_INTERNAL: + Resume_Init(); + ResumeS.eState = RESUME_START; + remotewakeupon = 1; + break; + case RESUME_LATER: + ResumeS.bESOFcnt = 2; + ResumeS.eState = RESUME_WAIT; + break; + case RESUME_WAIT: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) + ResumeS.eState = RESUME_START; + break; + case RESUME_START: + wCNTR = _GetCNTR(); + wCNTR |= CNTR_RESUME; + _SetCNTR(wCNTR); + ResumeS.eState = RESUME_ON; + ResumeS.bESOFcnt = 10; + break; + case RESUME_ON: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) + { + wCNTR = _GetCNTR(); + wCNTR &= (~CNTR_RESUME); + _SetCNTR(wCNTR); + ResumeS.eState = RESUME_OFF; + remotewakeupon = 0; + } + break; + case RESUME_OFF: + case RESUME_ESOF: + default: + ResumeS.eState = RESUME_OFF; + break; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |